[ 7799.340490] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[ 7799.342235] PM: Syncing filesystems ... done.
[ 7799.715826] PM: Preparing system for mem sleep
[ 7799.716156] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 7799.717517] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[ 7799.718276] PM: Entering mem sleep
[ 7799.718315] Suspending console(s) (use no_console_suspend to debug)
[ 7799.749096] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 7799.750494] sd 1:0:0:0: [sda] Stopping disk
[ 7799.806084] mei_me 0000:00:16.0: suspend
[ 7800.829205] PM: suspend of devices complete after 1109.766 msecs
[ 7800.829360] PM: late suspend of devices complete after 0.153 msecs
[ 7800.842801] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 7800.869243] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 7800.882895] PM: noirq suspend of devices complete after 53.489 msecs
[ 7800.883186] ACPI: Preparing to enter system sleep state S3
[ 7800.883480] PM: Saving platform NVS memory
[ 7800.884088] Disabling non-boot CPUs ...
[ 7800.985935] smpboot: CPU 1 is now offline
[ 7801.089360] smpboot: CPU 2 is now offline
[ 7801.090756] smpboot: CPU 3 is now offline
[ 7801.093914] ACPI: Low-level resume complete
[ 7801.093998] PM: Restoring platform NVS memory
[ 7801.094736] Enabling non-boot CPUs ...
[ 7801.094808] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 7801.110492] Intel pstate controlling: cpu 1
[ 7801.110572] CPU1 is up
[ 7801.110601] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 7801.125552] Intel pstate controlling: cpu 2
[ 7801.125609] CPU2 is up
[ 7801.125631] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 7801.140359] Intel pstate controlling: cpu 3
[ 7801.140410] CPU3 is up
[ 7801.146147] ACPI: Waking up from system sleep state S3
[ 7801.189819] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 7801.229854] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 7801.256677] PM: noirq resume of devices complete after 106.627 msecs
[ 7801.256797] PM: early resume of devices complete after 0.102 msecs
[ 7801.256818] i915 0000:00:02.0: setting latency timer to 64
[ 7801.256913] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
[ 7801.256950] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 7801.257025] ahci 0000:00:1f.2: setting latency timer to 64
[ 7801.257059] snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X
[ 7801.257151] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 7801.257181] mei_me 0000:00:16.0: irq 62 for MSI/MSI-X
[ 7801.265758] dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
[ 7801.265759] PM: Device 00:06 failed to resume: error -19
[ 7801.576790] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7801.577491] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[ 7801.577827] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 7801.583298] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[ 7801.583489] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 7801.583575] ata2.00: configured for UDMA/133
[ 7801.583625] sd 1:0:0:0: [sda] Starting disk
[ 7801.670411] usb 1-7: reset full-speed USB device number 13 using xhci_hcd
[ 7801.684417] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173800
[ 7801.684418] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173840
[ 7801.684438] usb 1-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 7801.843931] usb 1-8: reset high-speed USB device number 4 using xhci_hcd
[ 7801.862802] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374a4f00
[ 7802.017248] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[ 7802.031902] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef040
[ 7802.031904] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef000
[ 7802.031909] usb 1-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
[ 7802.031911] usb 1-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
[ 7802.049676] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 7802.049816] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 7802.190815] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[ 7802.204659] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401840
[ 7802.204660] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401880
[ 7802.204661] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374018c0
[ 7802.204662] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0f80
[ 7802.204663] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0fc0
[ 7802.205145] btusb 1-4:1.0: no reset_resume for driver btusb?
[ 7802.205146] btusb 1-4:1.1: no reset_resume for driver btusb?
[ 7802.205387] PM: resume of devices complete after 947.821 msecs
[ 7802.206122] PM: Finishing wakeup.
[ 7802.206172] iwlwifi 0000:01:00.0: no hotplug settings from platform
[ 7802.207188] pci_bus 0000:01: Allocating resources
[ 7802.207204] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 7802.207211] pci 0000:00:00.0: no hotplug settings from platform
[ 7802.207212] pci 0000:00:00.0: using default PCI settings
[ 7802.207216] i915 0000:00:02.0: no hotplug settings from platform
[ 7802.207217] i915 0000:00:02.0: using default PCI settings
[ 7802.207221] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[ 7802.207223] pci 0000:00:04.0: no hotplug settings from platform
[ 7802.207224] pci 0000:00:04.0: using default PCI settings
[ 7802.207228] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 7802.207229] xhci_hcd 0000:00:14.0: using default PCI settings
[ 7802.207234] mei_me 0000:00:16.0: no hotplug settings from platform
[ 7802.207235] mei_me 0000:00:16.0: using default PCI settings
[ 7802.207241] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 7802.207243] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 7802.207249] iwlwifi 0000:01:00.0: no hotplug settings from platform
[ 7802.207252] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 7802.207269] ehci-pci 0000:00:1d.0: using default PCI settings
[ 7802.207278] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 7802.207279] lpc_ich 0000:00:1f.0: using default PCI settings
[ 7802.207288] ahci 0000:00:1f.2: no hotplug settings from platform
[ 7802.207290] ahci 0000:00:1f.2: using default PCI settings
[ 7802.207296] pci 0000:00:1f.3: no hotplug settings from platform
[ 7802.207298] pci 0000:00:1f.3: using default PCI settings
[ 7802.207304] pci 0000:00:1f.6: no hotplug settings from platform
[ 7802.207306] pci 0000:00:1f.6: using default PCI settings
[ 7802.208284] pci_bus 0000:01: Allocating resources
[ 7802.208299] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 7802.208307] pci 0000:00:00.0: no hotplug settings from platform
[ 7802.208309] pci 0000:00:00.0: using default PCI settings
[ 7802.208314] i915 0000:00:02.0: no hotplug settings from platform
[ 7802.208316] i915 0000:00:02.0: using default PCI settings
[ 7802.208321] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[ 7802.208324] pci 0000:00:04.0: no hotplug settings from platform
[ 7802.208326] pci 0000:00:04.0: using default PCI settings
[ 7802.208331] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 7802.208333] xhci_hcd 0000:00:14.0: using default PCI settings
[ 7802.208339] mei_me 0000:00:16.0: no hotplug settings from platform
[ 7802.208341] mei_me 0000:00:16.0: using default PCI settings
[ 7802.208348] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 7802.208351] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 7802.208359] iwlwifi 0000:01:00.0: no hotplug settings from platform
[ 7802.208362] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 7802.208364] ehci-pci 0000:00:1d.0: using default PCI settings
[ 7802.208371] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 7802.208373] lpc_ich 0000:00:1f.0: using default PCI settings
[ 7802.208382] ahci 0000:00:1f.2: no hotplug settings from platform
[ 7802.208383] ahci 0000:00:1f.2: using default PCI settings
[ 7802.208390] pci 0000:00:1f.3: no hotplug settings from platform
[ 7802.208391] pci 0000:00:1f.3: using default PCI settings
[ 7802.208398] pci 0000:00:1f.6: no hotplug settings from platform
[ 7802.208400] pci 0000:00:1f.6: using default PCI settings
[ 7802.206123] Restarting tasks ... done.
[ 7802.210203] video LNXVIDEO:00: Restoring backlight state
[ 7802.220518] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 7802.220524] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 7802.316618] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 7802.657674] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 7805.869520] wlp1s0: authenticate with 6e:ad:f8:22:f5:bd
[ 7805.870271] wlp1s0: send auth to 6e:ad:f8:22:f5:bd (try 1/3)
[ 7805.872569] wlp1s0: authenticated
[ 7805.873595] wlp1s0: associate with 6e:ad:f8:22:f5:bd (try 1/3)
[ 7805.878368] wlp1s0: RX AssocResp from 6e:ad:f8:22:f5:bd (capab=0x431 status=0 aid=1)
[ 7805.879025] wlp1s0: associated
[11362.351020] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[11362.376599] PM: Syncing filesystems ... done.
[11362.572713] PM: Preparing system for mem sleep
[11362.572938] Freezing user space processes ... (elapsed 0.001 seconds) done.
[11362.574313] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[11362.575193] PM: Entering mem sleep
[11362.575242] Suspending console(s) (use no_console_suspend to debug)
[11362.575501] wlp1s0: deauthenticating from 6e:ad:f8:22:f5:bd by local choice (reason=3)
[11362.602864] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[11362.603396] cfg80211: Calling CRDA to update world regulatory domain
[11362.604267] sd 1:0:0:0: [sda] Stopping disk
[11362.660342] mei_me 0000:00:16.0: suspend
[11363.682770] PM: suspend of devices complete after 1106.424 msecs
[11363.682947] PM: late suspend of devices complete after 0.174 msecs
[11363.696328] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[11363.722825] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[11363.736471] PM: noirq suspend of devices complete after 53.479 msecs
[11363.736762] ACPI: Preparing to enter system sleep state S3
[11363.737055] PM: Saving platform NVS memory
[11363.737638] Disabling non-boot CPUs ...
[11363.839518] smpboot: CPU 1 is now offline
[11363.942934] smpboot: CPU 2 is now offline
[11364.046349] smpboot: CPU 3 is now offline
[11364.049485] ACPI: Low-level resume complete
[11364.049630] PM: Restoring platform NVS memory
[11364.050521] Enabling non-boot CPUs ...
[11364.050591] smpboot: Booting Node 0 Processor 1 APIC 0x1
[11364.066007] Intel pstate controlling: cpu 1
[11364.066080] CPU1 is up
[11364.066108] smpboot: Booting Node 0 Processor 2 APIC 0x2
[11364.080954] Intel pstate controlling: cpu 2
[11364.081010] CPU2 is up
[11364.081032] smpboot: Booting Node 0 Processor 3 APIC 0x3
[11364.095663] Intel pstate controlling: cpu 3
[11364.095710] CPU3 is up
[11364.101265] ACPI: Waking up from system sleep state S3
[11364.143698] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[11364.183730] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[11364.210503] PM: noirq resume of devices complete after 104.358 msecs
[11364.210627] PM: early resume of devices complete after 0.107 msecs
[11364.210648] i915 0000:00:02.0: setting latency timer to 64
[11364.210659] xhci_hcd 0000:00:14.0: setting latency timer to 64
[11364.210680] mei_me 0000:00:16.0: irq 60 for MSI/MSI-X
[11364.210742] ahci 0000:00:1f.2: setting latency timer to 64
[11364.210859] snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X
[11364.210892] ehci-pci 0000:00:1d.0: setting latency timer to 64
[11364.211057] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
[11364.530630] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[11364.624247] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[11364.638188] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401840
[11364.638189] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401880
[11364.638190] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374018c0
[11364.638191] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0f80
[11364.638192] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0fc0
[11364.638831] btusb 1-4:1.0: no reset_resume for driver btusb?
[11364.638832] btusb 1-4:1.1: no reset_resume for driver btusb?
[11364.718664] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[11364.719027] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[11364.719066] dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
[11364.719067] PM: Device 00:06 failed to resume: error -19
[11364.724443] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[11364.724608] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[11364.724663] ata2.00: configured for UDMA/133
[11364.724693] sd 1:0:0:0: [sda] Starting disk
[11364.797711] usb 1-7: reset full-speed USB device number 13 using xhci_hcd
[11364.811445] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173800
[11364.811446] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173840
[11364.811451] usb 1-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[11364.971125] usb 1-8: reset high-speed USB device number 4 using xhci_hcd
[11364.990195] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374a4f00
[11365.144636] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[11365.159683] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef040
[11365.159684] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef000
[11365.159703] usb 1-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
[11365.159704] usb 1-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
[11365.177635] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[11365.177774] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[11365.189851] PM: resume of devices complete after 978.431 msecs
[11365.190193] PM: Finishing wakeup.
[11365.190538] iwlwifi 0000:01:00.0: no hotplug settings from platform
[11365.190194] Restarting tasks ... done.
[11365.191308] video LNXVIDEO:00: Restoring backlight state
[11365.192848] pci_bus 0000:01: Allocating resources
[11365.192865] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[11365.192875] pci 0000:00:00.0: no hotplug settings from platform
[11365.192877] pci 0000:00:00.0: using default PCI settings
[11365.192883] i915 0000:00:02.0: no hotplug settings from platform
[11365.192885] i915 0000:00:02.0: using default PCI settings
[11365.192891] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[11365.192894] pci 0000:00:04.0: no hotplug settings from platform
[11365.192896] pci 0000:00:04.0: using default PCI settings
[11365.192902] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[11365.192904] xhci_hcd 0000:00:14.0: using default PCI settings
[11365.192910] mei_me 0000:00:16.0: no hotplug settings from platform
[11365.192912] mei_me 0000:00:16.0: using default PCI settings
[11365.192919] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[11365.192923] pcieport 0000:00:1c.0: no hotplug settings from platform
[11365.192932] iwlwifi 0000:01:00.0: no hotplug settings from platform
[11365.192936] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[11365.192938] ehci-pci 0000:00:1d.0: using default PCI settings
[11365.192946] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[11365.192947] lpc_ich 0000:00:1f.0: using default PCI settings
[11365.192957] ahci 0000:00:1f.2: no hotplug settings from platform
[11365.192958] ahci 0000:00:1f.2: using default PCI settings
[11365.192965] pci 0000:00:1f.3: no hotplug settings from platform
[11365.192966] pci 0000:00:1f.3: using default PCI settings
[11365.192973] pci 0000:00:1f.6: no hotplug settings from platform
[11365.192975] pci 0000:00:1f.6: using default PCI settings
[11365.194011] pci_bus 0000:01: Allocating resources
[11365.194026] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[11365.194036] pci 0000:00:00.0: no hotplug settings from platform
[11365.194037] pci 0000:00:00.0: using default PCI settings
[11365.194042] i915 0000:00:02.0: no hotplug settings from platform
[11365.194044] i915 0000:00:02.0: using default PCI settings
[11365.194050] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[11365.194053] pci 0000:00:04.0: no hotplug settings from platform
[11365.194055] pci 0000:00:04.0: using default PCI settings
[11365.194060] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[11365.194061] xhci_hcd 0000:00:14.0: using default PCI settings
[11365.194068] mei_me 0000:00:16.0: no hotplug settings from platform
[11365.194070] mei_me 0000:00:16.0: using default PCI settings
[11365.194077] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[11365.194080] pcieport 0000:00:1c.0: no hotplug settings from platform
[11365.194088] iwlwifi 0000:01:00.0: no hotplug settings from platform
[11365.194092] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[11365.194093] ehci-pci 0000:00:1d.0: using default PCI settings
[11365.194101] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[11365.194103] lpc_ich 0000:00:1f.0: using default PCI settings
[11365.194112] ahci 0000:00:1f.2: no hotplug settings from platform
[11365.194113] ahci 0000:00:1f.2: using default PCI settings
[11365.194120] pci 0000:00:1f.3: no hotplug settings from platform
[11365.194121] pci 0000:00:1f.3: using default PCI settings
[11365.194127] pci 0000:00:1f.6: no hotplug settings from platform
[11365.194129] pci 0000:00:1f.6: using default PCI settings
[11365.210445] Bluetooth: hci0: read Intel version: 370710018002030d00
[11365.210475] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[11365.310573] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[11365.558119] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[11368.950564] wlp1s0: authenticate with dc:9f:db:3a:f7:72
[11368.951308] wlp1s0: direct probe to dc:9f:db:3a:f7:72 (try 1/3)
[11369.155028] wlp1s0: direct probe to dc:9f:db:3a:f7:72 (try 2/3)
[11369.358524] wlp1s0: direct probe to dc:9f:db:3a:f7:72 (try 3/3)
[11369.561376] wlp1s0: authentication with dc:9f:db:3a:f7:72 timed out
[11382.730500] wlp1s0: authenticate with dc:9f:db:3a:f7:72
[11382.731457] wlp1s0: send auth to dc:9f:db:3a:f7:72 (try 1/3)
[11382.734074] wlp1s0: authenticated
[11382.735379] wlp1s0: associate with dc:9f:db:3a:f7:72 (try 1/3)
[11382.742900] wlp1s0: RX AssocResp from dc:9f:db:3a:f7:72 (capab=0x421 status=0 aid=7)
[11382.744462] wlp1s0: associated
[11416.630106] cfg80211: Calling CRDA to update world regulatory domain
[11420.390095] wlp1s0: authenticate with dc:9f:db:3a:f7:72
[11420.390806] wlp1s0: send auth to dc:9f:db:3a:f7:72 (try 1/3)
[11420.392499] wlp1s0: authenticated
[11420.395700] wlp1s0: associate with dc:9f:db:3a:f7:72 (try 1/3)
[11420.454652] wlp1s0: RX AssocResp from dc:9f:db:3a:f7:72 (capab=0x421 status=0 aid=7)
[11420.457887] wlp1s0: associated
[11425.051211] cfg80211: Calling CRDA to update world regulatory domain
[11428.811324] wlp1s0: authenticate with dc:9f:db:3a:f7:72
[11428.812150] wlp1s0: send auth to dc:9f:db:3a:f7:72 (try 1/3)
[11428.813848] wlp1s0: authenticated
[11428.815858] wlp1s0: associate with dc:9f:db:3a:f7:72 (try 1/3)
[11428.820086] wlp1s0: RX AssocResp from dc:9f:db:3a:f7:72 (capab=0x421 status=0 aid=7)
[11428.829956] wlp1s0: associated
[11574.656808] cfg80211: Calling CRDA to update world regulatory domain
[11578.416803] wlp1s0: authenticate with 6e:ad:f8:22:f5:bd
[11578.417729] wlp1s0: send auth to 6e:ad:f8:22:f5:bd (try 1/3)
[11578.422633] wlp1s0: authenticated
[11578.423327] wlp1s0: associate with 6e:ad:f8:22:f5:bd (try 1/3)
[11578.428160] wlp1s0: RX AssocResp from 6e:ad:f8:22:f5:bd (capab=0x431 status=0 aid=1)
[11578.428846] wlp1s0: associated
[11663.314241] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[11663.315934] PM: Syncing filesystems ... done.
[11663.504940] PM: Preparing system for mem sleep
[11663.505198] Freezing user space processes ... (elapsed 0.001 seconds) done.
[11663.506617] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[11663.507726] PM: Entering mem sleep
[11663.507771] Suspending console(s) (use no_console_suspend to debug)
[11663.508008] wlp1s0: deauthenticating from 6e:ad:f8:22:f5:bd by local choice (reason=3)
[11663.542991] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[11663.543255] cfg80211: Calling CRDA to update world regulatory domain
[11663.544429] sd 1:0:0:0: [sda] Stopping disk
[11663.600180] mei_me 0000:00:16.0: suspend
[11664.629610] PM: suspend of devices complete after 1120.717 msecs
[11664.629779] PM: late suspend of devices complete after 0.167 msecs
[11664.643159] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[11664.669653] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[11664.683302] PM: noirq suspend of devices complete after 53.477 msecs
[11664.683593] ACPI: Preparing to enter system sleep state S3
[11664.683888] PM: Saving platform NVS memory
[11664.684490] Disabling non-boot CPUs ...
[11664.786346] smpboot: CPU 1 is now offline
[11664.889764] smpboot: CPU 2 is now offline
[11664.891161] smpboot: CPU 3 is now offline
[11664.894323] ACPI: Low-level resume complete
[11664.894466] PM: Restoring platform NVS memory
[11664.895360] Enabling non-boot CPUs ...
[11664.895427] smpboot: Booting Node 0 Processor 1 APIC 0x1
[11664.910848] Intel pstate controlling: cpu 1
[11664.910923] CPU1 is up
[11664.910952] smpboot: Booting Node 0 Processor 2 APIC 0x2
[11664.925845] Intel pstate controlling: cpu 2
[11664.925902] CPU2 is up
[11664.925922] smpboot: Booting Node 0 Processor 3 APIC 0x3
[11664.940549] Intel pstate controlling: cpu 3
[11664.940596] CPU3 is up
[11664.946196] ACPI: Waking up from system sleep state S3
[11664.987148] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[11665.027155] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[11665.053949] PM: noirq resume of devices complete after 103.974 msecs
[11665.054072] PM: early resume of devices complete after 0.107 msecs
[11665.054089] i915 0000:00:02.0: setting latency timer to 64
[11665.054101] xhci_hcd 0000:00:14.0: setting latency timer to 64
[11665.054124] mei_me 0000:00:16.0: irq 60 for MSI/MSI-X
[11665.054183] snd_hda_intel 0000:00:03.0: irq 61 for MSI/MSI-X
[11665.054255] snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
[11665.054300] ahci 0000:00:1f.2: setting latency timer to 64
[11665.054371] ehci-pci 0000:00:1d.0: setting latency timer to 64
[11665.061818] dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
[11665.061820] PM: Device 00:06 failed to resume: error -19
[11665.387411] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[11665.388170] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[11665.388511] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[11665.393898] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[11665.394104] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[11665.394185] ata2.00: configured for UDMA/133
[11665.394237] sd 1:0:0:0: [sda] Starting disk
[11665.467632] usb 1-7: reset full-speed USB device number 13 using xhci_hcd
[11665.481437] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173800
[11665.481438] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173840
[11665.481444] usb 1-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[11665.641164] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[11665.655074] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401840
[11665.655075] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401880
[11665.655076] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374018c0
[11665.655077] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0f80
[11665.655077] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0fc0
[11665.655691] btusb 1-4:1.0: no reset_resume for driver btusb?
[11665.655692] btusb 1-4:1.1: no reset_resume for driver btusb?
[11665.814557] usb 1-8: reset high-speed USB device number 4 using xhci_hcd
[11665.833605] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374a4f00
[11665.988086] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[11666.002822] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef040
[11666.002823] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef000
[11666.002827] usb 1-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
[11666.002828] usb 1-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
[11666.020419] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[11666.020559] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[11666.032376] PM: resume of devices complete after 977.512 msecs
[11666.032770] PM: Finishing wakeup.
[11666.032792] iwlwifi 0000:01:00.0: no hotplug settings from platform
[11666.033775] pci_bus 0000:01: Allocating resources
[11666.033792] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[11666.033802] pci 0000:00:00.0: no hotplug settings from platform
[11666.033804] pci 0000:00:00.0: using default PCI settings
[11666.033809] i915 0000:00:02.0: no hotplug settings from platform
[11666.033811] i915 0000:00:02.0: using default PCI settings
[11666.033817] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[11666.033820] pci 0000:00:04.0: no hotplug settings from platform
[11666.033822] pci 0000:00:04.0: using default PCI settings
[11666.033827] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[11666.033828] xhci_hcd 0000:00:14.0: using default PCI settings
[11666.033836] mei_me 0000:00:16.0: no hotplug settings from platform
[11666.033837] mei_me 0000:00:16.0: using default PCI settings
[11666.033844] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[11666.033847] pcieport 0000:00:1c.0: no hotplug settings from platform
[11666.033856] iwlwifi 0000:01:00.0: no hotplug settings from platform
[11666.033860] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[11666.033862] ehci-pci 0000:00:1d.0: using default PCI settings
[11666.033870] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[11666.033871] lpc_ich 0000:00:1f.0: using default PCI settings
[11666.033881] ahci 0000:00:1f.2: no hotplug settings from platform
[11666.033882] ahci 0000:00:1f.2: using default PCI settings
[11666.033889] pci 0000:00:1f.3: no hotplug settings from platform
[11666.033890] pci 0000:00:1f.3: using default PCI settings
[11666.033897] pci 0000:00:1f.6: no hotplug settings from platform
[11666.033898] pci 0000:00:1f.6: using default PCI settings
[11666.034947] pci_bus 0000:01: Allocating resources
[11666.034962] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[11666.034971] pci 0000:00:00.0: no hotplug settings from platform
[11666.034973] pci 0000:00:00.0: using default PCI settings
[11666.034978] i915 0000:00:02.0: no hotplug settings from platform
[11666.034980] i915 0000:00:02.0: using default PCI settings
[11666.034986] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[11666.034989] pci 0000:00:04.0: no hotplug settings from platform
[11666.034991] pci 0000:00:04.0: using default PCI settings
[11666.034996] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[11666.034998] xhci_hcd 0000:00:14.0: using default PCI settings
[11666.035004] mei_me 0000:00:16.0: no hotplug settings from platform
[11666.035006] mei_me 0000:00:16.0: using default PCI settings
[11666.035012] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[11666.035015] pcieport 0000:00:1c.0: no hotplug settings from platform
[11666.035023] iwlwifi 0000:01:00.0: no hotplug settings from platform
[11666.035025] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[11666.035027] ehci-pci 0000:00:1d.0: using default PCI settings
[11666.035035] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[11666.035040] lpc_ich 0000:00:1f.0: using default PCI settings
[11666.035052] ahci 0000:00:1f.2: no hotplug settings from platform
[11666.035057] ahci 0000:00:1f.2: using default PCI settings
[11666.035066] pci 0000:00:1f.3: no hotplug settings from platform
[11666.035071] pci 0000:00:1f.3: using default PCI settings
[11666.035081] pci 0000:00:1f.6: no hotplug settings from platform
[11666.035086] pci 0000:00:1f.6: using default PCI settings
[11666.032771] Restarting tasks ... done.
[11666.041273] video LNXVIDEO:00: Restoring backlight state
[11666.047142] Bluetooth: hci0: read Intel version: 370710018002030d00
[11666.047147] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[11666.186988] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[11666.785209] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[11669.795133] wlp1s0: authenticate with 6e:ad:f8:22:f5:bd
[11669.796234] wlp1s0: send auth to 6e:ad:f8:22:f5:bd (try 1/3)
[11669.805295] wlp1s0: authenticated
[11669.807684] wlp1s0: associate with 6e:ad:f8:22:f5:bd (try 1/3)
[11669.812038] wlp1s0: RX AssocResp from 6e:ad:f8:22:f5:bd (capab=0x411 status=0 aid=1)
[11669.813466] wlp1s0: associated
[11682.087756] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[12215.227635] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[12215.229432] PM: Syncing filesystems ... done.
[12215.399418] PM: Preparing system for mem sleep
[12215.399627] Freezing user space processes ... (elapsed 0.001 seconds) done.
[12215.401027] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[12215.402158] PM: Entering mem sleep
[12215.402217] Suspending console(s) (use no_console_suspend to debug)
[12215.402474] wlp1s0: deauthenticating from 6e:ad:f8:22:f5:bd by local choice (reason=3)
[12215.432261] cfg80211: Calling CRDA to update world regulatory domain
[12215.432312] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[12215.433674] sd 1:0:0:0: [sda] Stopping disk
[12215.488959] mei_me 0000:00:16.0: suspend
[12216.605814] PM: suspend of devices complete after 1202.390 msecs
[12216.605981] PM: late suspend of devices complete after 0.165 msecs
[12216.619367] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[12216.645857] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[12216.659470] PM: noirq suspend of devices complete after 53.443 msecs
[12216.659761] ACPI: Preparing to enter system sleep state S3
[12216.660057] PM: Saving platform NVS memory
[12216.660675] Disabling non-boot CPUs ...
[12216.762549] smpboot: CPU 1 is now offline
[12216.865975] smpboot: CPU 2 is now offline
[12216.867351] smpboot: CPU 3 is now offline
[12216.870502] ACPI: Low-level resume complete
[12216.870647] PM: Restoring platform NVS memory
[12216.871534] Enabling non-boot CPUs ...
[12216.871599] smpboot: Booting Node 0 Processor 1 APIC 0x1
[12216.886762] Intel pstate controlling: cpu 1
[12216.886841] CPU1 is up
[12216.886871] smpboot: Booting Node 0 Processor 2 APIC 0x2
[12216.901733] Intel pstate controlling: cpu 2
[12216.901787] CPU2 is up
[12216.901809] smpboot: Booting Node 0 Processor 3 APIC 0x3
[12216.916425] Intel pstate controlling: cpu 3
[12216.916471] CPU3 is up
[12216.922028] ACPI: Waking up from system sleep state S3
[12216.966698] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[12217.006723] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[12217.033498] PM: noirq resume of devices complete after 106.348 msecs
[12217.033616] PM: early resume of devices complete after 0.102 msecs
[12217.033637] i915 0000:00:02.0: setting latency timer to 64
[12217.033646] xhci_hcd 0000:00:14.0: setting latency timer to 64
[12217.033719] mei_me 0000:00:16.0: irq 60 for MSI/MSI-X
[12217.033775] snd_hda_intel 0000:00:03.0: irq 61 for MSI/MSI-X
[12217.033776] ahci 0000:00:1f.2: setting latency timer to 64
[12217.033879] snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
[12217.033999] ehci-pci 0000:00:1d.0: setting latency timer to 64
[12217.045380] dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
[12217.045382] PM: Device 00:06 failed to resume: error -19
[12217.366954] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[12217.367714] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[12217.368055] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[12217.373633] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[12217.373970] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[12217.374057] ata2.00: configured for UDMA/133
[12217.374107] sd 1:0:0:0: [sda] Starting disk
[12217.447210] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[12217.461952] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef040
[12217.461953] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef000
[12217.461960] usb 1-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
[12217.461962] usb 1-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
[12217.620591] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[12217.634455] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401840
[12217.634456] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401880
[12217.634457] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374018c0
[12217.634458] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0f80
[12217.634459] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0fc0
[12217.634926] btusb 1-4:1.0: no reset_resume for driver btusb?
[12217.634927] btusb 1-4:1.1: no reset_resume for driver btusb?
[12217.794169] usb 1-8: reset high-speed USB device number 4 using xhci_hcd
[12217.813235] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374a4f00
[12217.816777] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[12217.816917] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[12217.967593] usb 1-7: reset full-speed USB device number 13 using xhci_hcd
[12217.981368] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173800
[12217.981369] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173840
[12217.981374] usb 1-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[12217.986545] PM: resume of devices complete after 952.157 msecs
[12217.987196] PM: Finishing wakeup.
[12217.987591] iwlwifi 0000:01:00.0: no hotplug settings from platform
[12217.992577] pci_bus 0000:01: Allocating resources
[12217.992595] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[12217.992605] pci 0000:00:00.0: no hotplug settings from platform
[12217.992607] pci 0000:00:00.0: using default PCI settings
[12217.992613] i915 0000:00:02.0: no hotplug settings from platform
[12217.992615] i915 0000:00:02.0: using default PCI settings
[12217.992621] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[12217.992624] pci 0000:00:04.0: no hotplug settings from platform
[12217.992626] pci 0000:00:04.0: using default PCI settings
[12217.992631] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[12217.992633] xhci_hcd 0000:00:14.0: using default PCI settings
[12217.992640] mei_me 0000:00:16.0: no hotplug settings from platform
[12217.992642] mei_me 0000:00:16.0: using default PCI settings
[12217.992649] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[12217.992653] pcieport 0000:00:1c.0: no hotplug settings from platform
[12217.992661] iwlwifi 0000:01:00.0: no hotplug settings from platform
[12217.992665] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[12217.992667] ehci-pci 0000:00:1d.0: using default PCI settings
[12217.992675] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[12217.992677] lpc_ich 0000:00:1f.0: using default PCI settings
[12217.992686] ahci 0000:00:1f.2: no hotplug settings from platform
[12217.992688] ahci 0000:00:1f.2: using default PCI settings
[12217.992694] pci 0000:00:1f.3: no hotplug settings from platform
[12217.992696] pci 0000:00:1f.3: using default PCI settings
[12217.992703] pci 0000:00:1f.6: no hotplug settings from platform
[12217.992704] pci 0000:00:1f.6: using default PCI settings
[12217.993710] pci_bus 0000:01: Allocating resources
[12217.993723] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[12217.993730] pci 0000:00:00.0: no hotplug settings from platform
[12217.993732] pci 0000:00:00.0: using default PCI settings
[12217.993738] i915 0000:00:02.0: no hotplug settings from platform
[12217.993739] i915 0000:00:02.0: using default PCI settings
[12217.993745] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[12217.993749] pci 0000:00:04.0: no hotplug settings from platform
[12217.993751] pci 0000:00:04.0: using default PCI settings
[12217.993756] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[12217.993757] xhci_hcd 0000:00:14.0: using default PCI settings
[12217.993764] mei_me 0000:00:16.0: no hotplug settings from platform
[12217.993766] mei_me 0000:00:16.0: using default PCI settings
[12217.993773] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[12217.993776] pcieport 0000:00:1c.0: no hotplug settings from platform
[12217.993785] iwlwifi 0000:01:00.0: no hotplug settings from platform
[12217.993788] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[12217.993790] ehci-pci 0000:00:1d.0: using default PCI settings
[12217.993797] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[12217.993799] lpc_ich 0000:00:1f.0: using default PCI settings
[12217.993808] ahci 0000:00:1f.2: no hotplug settings from platform
[12217.993810] ahci 0000:00:1f.2: using default PCI settings
[12217.993816] pci 0000:00:1f.3: no hotplug settings from platform
[12217.993818] pci 0000:00:1f.3: using default PCI settings
[12217.993824] pci 0000:00:1f.6: no hotplug settings from platform
[12217.993826] pci 0000:00:1f.6: using default PCI settings
[12217.987197] Restarting tasks ... done.
[12217.993852] video LNXVIDEO:00: Restoring backlight state
[12217.999338] Bluetooth: hci0: read Intel version: 370710018002030d00
[12217.999368] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[12218.149498] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[12218.244341] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[12221.698828] wlp1s0: authenticate with 6e:ad:f8:22:f5:bd
[12221.699564] wlp1s0: send auth to 6e:ad:f8:22:f5:bd (try 1/3)
[12221.701399] wlp1s0: authenticated
[12221.703848] wlp1s0: associate with 6e:ad:f8:22:f5:bd (try 1/3)
[12221.708300] wlp1s0: RX AssocResp from 6e:ad:f8:22:f5:bd (capab=0x411 status=0 aid=1)
[12221.709971] wlp1s0: associated
[12246.711308] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[12247.998520] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[12248.002594] PM: Syncing filesystems ... done.
[12248.423161] PM: Preparing system for mem sleep
[12248.423419] Freezing user space processes ... (elapsed 0.001 seconds) done.
[12248.424813] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[12248.425926] PM: Entering mem sleep
[12248.425970] Suspending console(s) (use no_console_suspend to debug)
[12248.426206] wlp1s0: deauthenticating from 6e:ad:f8:22:f5:bd by local choice (reason=3)
[12248.463065] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[12248.463388] cfg80211: Calling CRDA to update world regulatory domain
[12248.464387] sd 1:0:0:0: [sda] Stopping disk
[12248.520821] mei_me 0000:00:16.0: suspend
[12249.629703] PM: suspend of devices complete after 1202.547 msecs
[12249.629871] PM: late suspend of devices complete after 0.166 msecs
[12249.643255] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[12249.669746] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[12249.683353] PM: noirq suspend of devices complete after 53.438 msecs
[12249.683645] ACPI: Preparing to enter system sleep state S3
[12249.683939] PM: Saving platform NVS memory
[12249.684550] Disabling non-boot CPUs ...
[12249.729737] [drm:hsw_unclaimed_reg_clear] *ERROR* Unknown unclaimed register before writing to c7204
[12249.729740] [drm:hsw_unclaimed_reg_check] *ERROR* Unclaimed write to c7204
[12249.786436] smpboot: CPU 1 is now offline
[12249.889856] smpboot: CPU 2 is now offline
[12249.993271] smpboot: CPU 3 is now offline
[12249.996405] ACPI: Low-level resume complete
[12249.996548] PM: Restoring platform NVS memory
[12249.997425] Enabling non-boot CPUs ...
[12249.997494] smpboot: Booting Node 0 Processor 1 APIC 0x1
[12250.012946] Intel pstate controlling: cpu 1
[12250.013025] CPU1 is up
[12250.013055] smpboot: Booting Node 0 Processor 2 APIC 0x2
[12250.027934] Intel pstate controlling: cpu 2
[12250.027991] CPU2 is up
[12250.028012] smpboot: Booting Node 0 Processor 3 APIC 0x3
[12250.042636] Intel pstate controlling: cpu 3
[12250.042682] CPU3 is up
[12250.048245] ACPI: Waking up from system sleep state S3
[12250.090617] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[12250.130644] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[12250.157415] PM: noirq resume of devices complete after 105.421 msecs
[12250.157534] PM: early resume of devices complete after 0.102 msecs
[12250.157554] i915 0000:00:02.0: setting latency timer to 64
[12250.157655] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
[12250.160186] xhci_hcd 0000:00:14.0: setting latency timer to 64
[12250.160253] mei_me 0000:00:16.0: irq 61 for MSI/MSI-X
[12250.160605] ahci 0000:00:1f.2: setting latency timer to 64
[12250.160669] snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
[12250.160723] ehci-pci 0000:00:1d.0: setting latency timer to 64
[12250.166395] dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
[12250.166396] PM: Device 00:06 failed to resume: error -19
[12250.494210] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[12250.494978] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[12250.495294] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[12250.500778] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[12250.501117] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[12250.501204] ata2.00: configured for UDMA/133
[12250.501246] sd 1:0:0:0: [sda] Starting disk
[12250.574458] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[12250.589419] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef040
[12250.589420] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef000
[12250.589441] usb 1-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
[12250.589442] usb 1-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
[12250.747850] usb 1-7: reset full-speed USB device number 13 using xhci_hcd
[12250.761607] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173800
[12250.761608] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173840
[12250.761615] usb 1-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[12250.921328] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[12250.935098] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401840
[12250.935099] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401880
[12250.935101] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374018c0
[12250.935102] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0f80
[12250.935103] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0fc0
[12250.935547] btusb 1-4:1.0: no reset_resume for driver btusb?
[12250.935548] btusb 1-4:1.1: no reset_resume for driver btusb?
[12251.094888] usb 1-8: reset high-speed USB device number 4 using xhci_hcd
[12251.113951] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374a4f00
[12251.117559] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[12251.117698] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[12251.129216] PM: resume of devices complete after 970.894 msecs
[12251.129599] PM: Finishing wakeup.
[12251.129931] iwlwifi 0000:01:00.0: no hotplug settings from platform
[12251.129600] Restarting tasks ... done.
[12251.132139] video LNXVIDEO:00: Restoring backlight state
[12251.133866] pci_bus 0000:01: Allocating resources
[12251.133882] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[12251.133893] pci 0000:00:00.0: no hotplug settings from platform
[12251.133895] pci 0000:00:00.0: using default PCI settings
[12251.133901] i915 0000:00:02.0: no hotplug settings from platform
[12251.133903] i915 0000:00:02.0: using default PCI settings
[12251.133908] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[12251.133912] pci 0000:00:04.0: no hotplug settings from platform
[12251.133914] pci 0000:00:04.0: using default PCI settings
[12251.133919] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[12251.133921] xhci_hcd 0000:00:14.0: using default PCI settings
[12251.133928] mei_me 0000:00:16.0: no hotplug settings from platform
[12251.133930] mei_me 0000:00:16.0: using default PCI settings
[12251.133937] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[12251.133941] pcieport 0000:00:1c.0: no hotplug settings from platform
[12251.133949] iwlwifi 0000:01:00.0: no hotplug settings from platform
[12251.133953] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[12251.133955] ehci-pci 0000:00:1d.0: using default PCI settings
[12251.133963] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[12251.133965] lpc_ich 0000:00:1f.0: using default PCI settings
[12251.133974] ahci 0000:00:1f.2: no hotplug settings from platform
[12251.133976] ahci 0000:00:1f.2: using default PCI settings
[12251.133982] pci 0000:00:1f.3: no hotplug settings from platform
[12251.133984] pci 0000:00:1f.3: using default PCI settings
[12251.133991] pci 0000:00:1f.6: no hotplug settings from platform
[12251.133993] pci 0000:00:1f.6: using default PCI settings
[12251.135010] pci_bus 0000:01: Allocating resources
[12251.135023] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[12251.135030] pci 0000:00:00.0: no hotplug settings from platform
[12251.135031] pci 0000:00:00.0: using default PCI settings
[12251.135036] i915 0000:00:02.0: no hotplug settings from platform
[12251.135037] i915 0000:00:02.0: using default PCI settings
[12251.135043] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[12251.135046] pci 0000:00:04.0: no hotplug settings from platform
[12251.135047] pci 0000:00:04.0: using default PCI settings
[12251.135052] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[12251.135053] xhci_hcd 0000:00:14.0: using default PCI settings
[12251.135059] mei_me 0000:00:16.0: no hotplug settings from platform
[12251.135060] mei_me 0000:00:16.0: using default PCI settings
[12251.135067] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[12251.135070] pcieport 0000:00:1c.0: no hotplug settings from platform
[12251.135078] iwlwifi 0000:01:00.0: no hotplug settings from platform
[12251.135080] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[12251.135082] ehci-pci 0000:00:1d.0: using default PCI settings
[12251.135088] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[12251.135090] lpc_ich 0000:00:1f.0: using default PCI settings
[12251.135098] ahci 0000:00:1f.2: no hotplug settings from platform
[12251.135100] ahci 0000:00:1f.2: using default PCI settings
[12251.135106] pci 0000:00:1f.3: no hotplug settings from platform
[12251.135107] pci 0000:00:1f.3: using default PCI settings
[12251.135113] pci 0000:00:1f.6: no hotplug settings from platform
[12251.135115] pci 0000:00:1f.6: using default PCI settings
[12251.149145] Bluetooth: hci0: read Intel version: 370710018002030d00
[12251.149151] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[12251.241793] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[12251.254834] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[12252.661656] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[12254.204250] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[12254.860446] wlp1s0: authenticate with 6e:ad:f8:22:f5:bd
[12254.861168] wlp1s0: send auth to 6e:ad:f8:22:f5:bd (try 1/3)
[12254.866401] wlp1s0: authenticated
[12254.867764] wlp1s0: associate with 6e:ad:f8:22:f5:bd (try 1/3)
[12254.872054] wlp1s0: RX AssocResp from 6e:ad:f8:22:f5:bd (capab=0x411 status=0 aid=1)
[12254.872863] wlp1s0: associated
[12254.206606] PM: Syncing filesystems ... done.
[12255.366658] PM: Preparing system for mem sleep
[12255.366751] Freezing user space processes ... (elapsed 0.001 seconds) done.
[12255.368164] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[12255.369274] PM: Entering mem sleep
[12255.369318] Suspending console(s) (use no_console_suspend to debug)
[12255.369556] wlp1s0: deauthenticating from 6e:ad:f8:22:f5:bd by local choice (reason=3)
[12255.418914] cfg80211: Calling CRDA to update world regulatory domain
[12255.419065] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[12255.420366] sd 1:0:0:0: [sda] Stopping disk
[12255.476237] mei_me 0000:00:16.0: suspend
[12256.519111] PM: suspend of devices complete after 1148.651 msecs
[12256.519281] PM: late suspend of devices complete after 0.168 msecs
[12256.532662] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[12256.559154] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[12256.572768] PM: noirq suspend of devices complete after 53.442 msecs
[12256.573060] ACPI: Preparing to enter system sleep state S3
[12256.573354] PM: Saving platform NVS memory
[12256.573946] Disabling non-boot CPUs ...
[12256.675847] smpboot: CPU 1 is now offline
[12256.779264] smpboot: CPU 2 is now offline
[12256.882679] smpboot: CPU 3 is now offline
[12256.885812] ACPI: Low-level resume complete
[12256.885958] PM: Restoring platform NVS memory
[12256.886830] Enabling non-boot CPUs ...
[12256.886896] smpboot: Booting Node 0 Processor 1 APIC 0x1
[12256.902353] Intel pstate controlling: cpu 1
[12256.902430] CPU1 is up
[12256.902459] smpboot: Booting Node 0 Processor 2 APIC 0x2
[12256.917311] Intel pstate controlling: cpu 2
[12256.917367] CPU2 is up
[12256.917389] smpboot: Booting Node 0 Processor 3 APIC 0x3
[12256.932019] Intel pstate controlling: cpu 3
[12256.932065] CPU3 is up
[12256.937611] ACPI: Waking up from system sleep state S3
[12256.980019] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[12257.020050] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[12257.046824] PM: noirq resume of devices complete after 104.621 msecs
[12257.046943] PM: early resume of devices complete after 0.102 msecs
[12257.046962] i915 0000:00:02.0: setting latency timer to 64
[12257.046972] xhci_hcd 0000:00:14.0: setting latency timer to 64
[12257.047042] mei_me 0000:00:16.0: irq 60 for MSI/MSI-X
[12257.047061] snd_hda_intel 0000:00:03.0: irq 61 for MSI/MSI-X
[12257.049119] snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
[12257.049666] ehci-pci 0000:00:1d.0: setting latency timer to 64
[12257.049681] ahci 0000:00:1f.2: setting latency timer to 64
[12257.057744] dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
[12257.057745] PM: Device 00:06 failed to resume: error -19
[12257.380279] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[12257.381019] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[12257.381358] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[12257.386591] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[12257.386744] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[12257.386796] ata2.00: configured for UDMA/133
[12257.386850] sd 1:0:0:0: [sda] Starting disk
[12257.463896] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[12257.478485] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef040
[12257.478486] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef000
[12257.478494] usb 1-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
[12257.478495] usb 1-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
[12257.637254] usb 1-7: reset full-speed USB device number 13 using xhci_hcd
[12257.651018] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173800
[12257.651020] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173840
[12257.651029] usb 1-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[12257.810732] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[12257.824503] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401840
[12257.824504] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401880
[12257.824506] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374018c0
[12257.824507] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0f80
[12257.824508] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0fc0
[12257.824910] btusb 1-4:1.0: no reset_resume for driver btusb?
[12257.824911] btusb 1-4:1.1: no reset_resume for driver btusb?
[12257.984272] usb 1-8: reset high-speed USB device number 4 using xhci_hcd
[12258.003348] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374a4f00
[12258.006960] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[12258.007099] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[12258.019058] PM: resume of devices complete after 971.328 msecs
[12258.019430] PM: Finishing wakeup.
[12258.019452] iwlwifi 0000:01:00.0: no hotplug settings from platform
[12258.020218] pci_bus 0000:01: Allocating resources
[12258.020234] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[12258.020243] pci 0000:00:00.0: no hotplug settings from platform
[12258.020245] pci 0000:00:00.0: using default PCI settings
[12258.020250] i915 0000:00:02.0: no hotplug settings from platform
[12258.020251] i915 0000:00:02.0: using default PCI settings
[12258.020257] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[12258.020260] pci 0000:00:04.0: no hotplug settings from platform
[12258.020262] pci 0000:00:04.0: using default PCI settings
[12258.020267] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[12258.020269] xhci_hcd 0000:00:14.0: using default PCI settings
[12258.020275] mei_me 0000:00:16.0: no hotplug settings from platform
[12258.020277] mei_me 0000:00:16.0: using default PCI settings
[12258.020284] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[12258.020288] pcieport 0000:00:1c.0: no hotplug settings from platform
[12258.020296] iwlwifi 0000:01:00.0: no hotplug settings from platform
[12258.020299] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[12258.020301] ehci-pci 0000:00:1d.0: using default PCI settings
[12258.020308] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[12258.020310] lpc_ich 0000:00:1f.0: using default PCI settings
[12258.020319] ahci 0000:00:1f.2: no hotplug settings from platform
[12258.020321] ahci 0000:00:1f.2: using default PCI settings
[12258.020327] pci 0000:00:1f.3: no hotplug settings from platform
[12258.020329] pci 0000:00:1f.3: using default PCI settings
[12258.020335] pci 0000:00:1f.6: no hotplug settings from platform
[12258.020337] pci 0000:00:1f.6: using default PCI settings
[12258.019431] Restarting tasks ... done.
[12258.024580] video LNXVIDEO:00: Restoring backlight state
[12258.025919] pci_bus 0000:01: Allocating resources
[12258.025935] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[12258.025946] pci 0000:00:00.0: no hotplug settings from platform
[12258.025948] pci 0000:00:00.0: using default PCI settings
[12258.025954] i915 0000:00:02.0: no hotplug settings from platform
[12258.025956] i915 0000:00:02.0: using default PCI settings
[12258.025962] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[12258.025965] pci 0000:00:04.0: no hotplug settings from platform
[12258.025967] pci 0000:00:04.0: using default PCI settings
[12258.025972] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[12258.025974] xhci_hcd 0000:00:14.0: using default PCI settings
[12258.025981] mei_me 0000:00:16.0: no hotplug settings from platform
[12258.025982] mei_me 0000:00:16.0: using default PCI settings
[12258.025989] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[12258.025993] pcieport 0000:00:1c.0: no hotplug settings from platform
[12258.026002] iwlwifi 0000:01:00.0: no hotplug settings from platform
[12258.026005] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[12258.026007] ehci-pci 0000:00:1d.0: using default PCI settings
[12258.026015] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[12258.026016] lpc_ich 0000:00:1f.0: using default PCI settings
[12258.026025] ahci 0000:00:1f.2: no hotplug settings from platform
[12258.026027] ahci 0000:00:1f.2: using default PCI settings
[12258.026033] pci 0000:00:1f.3: no hotplug settings from platform
[12258.026034] pci 0000:00:1f.3: using default PCI settings
[12258.026040] pci 0000:00:1f.6: no hotplug settings from platform
[12258.026042] pci 0000:00:1f.6: using default PCI settings
[12258.032040] Bluetooth: hci0: read Intel version: 370710018002030d00
[12258.032046] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[12258.128115] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[12258.264360] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[12259.516096] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[12261.764633] wlp1s0: authenticate with 6e:ad:f8:22:f5:bd
[12261.765270] wlp1s0: send auth to 6e:ad:f8:22:f5:bd (try 1/3)
[12261.771484] wlp1s0: authenticated
[12261.773833] wlp1s0: associate with 6e:ad:f8:22:f5:bd (try 1/3)
[12261.778178] wlp1s0: RX AssocResp from 6e:ad:f8:22:f5:bd (capab=0x411 status=0 aid=1)
[12261.779576] wlp1s0: associated
[12265.542157] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[12265.544571] PM: Syncing filesystems ... done.
[12266.661989] PM: Preparing system for mem sleep
[12266.662081] Freezing user space processes ... (elapsed 0.001 seconds) done.
[12266.663499] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[12266.664452] PM: Entering mem sleep
[12266.664496] Suspending console(s) (use no_console_suspend to debug)
[12266.664733] wlp1s0: deauthenticating from 6e:ad:f8:22:f5:bd by local choice (reason=3)
[12266.692191] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[12266.692437] cfg80211: Calling CRDA to update world regulatory domain
[12266.693485] sd 1:0:0:0: [sda] Stopping disk
[12266.749313] mei_me 0000:00:16.0: suspend
[12267.865448] PM: suspend of devices complete after 1199.765 msecs
[12267.865616] PM: late suspend of devices complete after 0.165 msecs
[12267.878993] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[12267.905491] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[12267.919098] PM: noirq suspend of devices complete after 53.438 msecs
[12267.919390] ACPI: Preparing to enter system sleep state S3
[12267.919685] PM: Saving platform NVS memory
[12267.920293] Disabling non-boot CPUs ...
[12268.022191] smpboot: CPU 1 is now offline
[12268.125602] smpboot: CPU 2 is now offline
[12268.229017] smpboot: CPU 3 is now offline
[12268.232141] ACPI: Low-level resume complete
[12268.232286] PM: Restoring platform NVS memory
[12268.233155] Enabling non-boot CPUs ...
[12268.233222] smpboot: Booting Node 0 Processor 1 APIC 0x1
[12268.248682] Intel pstate controlling: cpu 1
[12268.248761] CPU1 is up
[12268.248791] smpboot: Booting Node 0 Processor 2 APIC 0x2
[12268.263648] Intel pstate controlling: cpu 2
[12268.263704] CPU2 is up
[12268.263726] smpboot: Booting Node 0 Processor 3 APIC 0x3
[12268.278355] Intel pstate controlling: cpu 3
[12268.278404] CPU3 is up
[12268.283991] ACPI: Waking up from system sleep state S3
[12268.326357] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[12268.366385] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[12268.393160] PM: noirq resume of devices complete after 105.901 msecs
[12268.393283] PM: early resume of devices complete after 0.106 msecs
[12268.393302] i915 0000:00:02.0: setting latency timer to 64
[12268.393391] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
[12268.396005] xhci_hcd 0000:00:14.0: setting latency timer to 64
[12268.396108] mei_me 0000:00:16.0: irq 61 for MSI/MSI-X
[12268.396331] ahci 0000:00:1f.2: setting latency timer to 64
[12268.396455] snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
[12268.396480] ehci-pci 0000:00:1d.0: setting latency timer to 64
[12268.404809] dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
[12268.404810] PM: Device 00:06 failed to resume: error -19
[12268.716606] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[12268.717547] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[12268.717886] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[12268.723261] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[12268.723726] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[12268.723805] ata2.00: configured for UDMA/133
[12268.723856] sd 1:0:0:0: [sda] Starting disk
[12268.810214] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[12268.824829] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef040
[12268.824831] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef000
[12268.824838] usb 1-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
[12268.824839] usb 1-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
[12268.983771] usb 1-7: reset full-speed USB device number 13 using xhci_hcd
[12268.997420] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173800
[12268.997422] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173840
[12268.997426] usb 1-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[12269.157067] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[12269.170842] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401840
[12269.170843] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401880
[12269.170844] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374018c0
[12269.170846] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0f80
[12269.170847] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0fc0
[12269.171262] btusb 1-4:1.0: no reset_resume for driver btusb?
[12269.171263] btusb 1-4:1.1: no reset_resume for driver btusb?
[12269.330650] usb 1-8: reset high-speed USB device number 4 using xhci_hcd
[12269.349707] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374a4f00
[12269.353328] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[12269.353468] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[12269.365352] PM: resume of devices complete after 971.282 msecs
[12269.365704] PM: Finishing wakeup.
[12269.365729] iwlwifi 0000:01:00.0: no hotplug settings from platform
[12269.366788] pci_bus 0000:01: Allocating resources
[12269.366805] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[12269.366815] pci 0000:00:00.0: no hotplug settings from platform
[12269.366817] pci 0000:00:00.0: using default PCI settings
[12269.366823] i915 0000:00:02.0: no hotplug settings from platform
[12269.366824] i915 0000:00:02.0: using default PCI settings
[12269.366830] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[12269.366833] pci 0000:00:04.0: no hotplug settings from platform
[12269.366834] pci 0000:00:04.0: using default PCI settings
[12269.366839] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[12269.366840] xhci_hcd 0000:00:14.0: using default PCI settings
[12269.366847] mei_me 0000:00:16.0: no hotplug settings from platform
[12269.366848] mei_me 0000:00:16.0: using default PCI settings
[12269.366855] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[12269.366858] pcieport 0000:00:1c.0: no hotplug settings from platform
[12269.366866] iwlwifi 0000:01:00.0: no hotplug settings from platform
[12269.366870] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[12269.366871] ehci-pci 0000:00:1d.0: using default PCI settings
[12269.366879] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[12269.366880] lpc_ich 0000:00:1f.0: using default PCI settings
[12269.366889] ahci 0000:00:1f.2: no hotplug settings from platform
[12269.366890] ahci 0000:00:1f.2: using default PCI settings
[12269.366896] pci 0000:00:1f.3: no hotplug settings from platform
[12269.366898] pci 0000:00:1f.3: using default PCI settings
[12269.366904] pci 0000:00:1f.6: no hotplug settings from platform
[12269.366906] pci 0000:00:1f.6: using default PCI settings
[12269.367916] pci_bus 0000:01: Allocating resources
[12269.367930] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[12269.367938] pci 0000:00:00.0: no hotplug settings from platform
[12269.367940] pci 0000:00:00.0: using default PCI settings
[12269.367945] i915 0000:00:02.0: no hotplug settings from platform
[12269.367946] i915 0000:00:02.0: using default PCI settings
[12269.367952] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[12269.367955] pci 0000:00:04.0: no hotplug settings from platform
[12269.367956] pci 0000:00:04.0: using default PCI settings
[12269.367961] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[12269.367963] xhci_hcd 0000:00:14.0: using default PCI settings
[12269.367969] mei_me 0000:00:16.0: no hotplug settings from platform
[12269.367971] mei_me 0000:00:16.0: using default PCI settings
[12269.367978] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[12269.367982] pcieport 0000:00:1c.0: no hotplug settings from platform
[12269.367990] iwlwifi 0000:01:00.0: no hotplug settings from platform
[12269.367993] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[12269.367995] ehci-pci 0000:00:1d.0: using default PCI settings
[12269.368003] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[12269.368005] lpc_ich 0000:00:1f.0: using default PCI settings
[12269.368014] ahci 0000:00:1f.2: no hotplug settings from platform
[12269.368016] ahci 0000:00:1f.2: using default PCI settings
[12269.368022] pci 0000:00:1f.3: no hotplug settings from platform
[12269.368024] pci 0000:00:1f.3: using default PCI settings
[12269.368031] pci 0000:00:1f.6: no hotplug settings from platform
[12269.368032] pci 0000:00:1f.6: using default PCI settings
[12269.365705] Restarting tasks ... done.
[12269.370750] video LNXVIDEO:00: Restoring backlight state
[12269.382211] Bluetooth: hci0: read Intel version: 370710018002030d00
[12269.382216] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[12269.478507] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[12270.297891] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[12273.113333] wlp1s0: authenticate with 6e:ad:f8:22:f5:bd
[12273.114041] wlp1s0: send auth to 6e:ad:f8:22:f5:bd (try 1/3)
[12273.118932] wlp1s0: authenticated
[12273.120200] wlp1s0: associate with 6e:ad:f8:22:f5:bd (try 1/3)
[12273.125260] wlp1s0: RX AssocResp from 6e:ad:f8:22:f5:bd (capab=0x411 status=0 aid=1)
[12273.126300] wlp1s0: associated
[12310.336898] mce: [Hardware Error]: Machine check events logged
[12330.824675] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[12352.046965] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[12352.048646] PM: Syncing filesystems ... done.
[12352.274547] PM: Preparing system for mem sleep
[12352.274733] Freezing user space processes ... (elapsed 0.001 seconds) done.
[12352.276131] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[12352.277244] PM: Entering mem sleep
[12352.277283] Suspending console(s) (use no_console_suspend to debug)
[12352.277534] wlp1s0: deauthenticating from 6e:ad:f8:22:f5:bd by local choice (reason=3)
[12352.318304] cfg80211: Calling CRDA to update world regulatory domain
[12352.318372] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[12352.319675] sd 1:0:0:0: [sda] Stopping disk
[12352.375561] mei_me 0000:00:16.0: suspend
[12353.471746] PM: suspend of devices complete after 1193.269 msecs
[12353.471903] PM: late suspend of devices complete after 0.155 msecs
[12353.485283] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[12353.511781] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[12353.525518] PM: noirq suspend of devices complete after 53.570 msecs
[12353.525810] ACPI: Preparing to enter system sleep state S3
[12353.526105] PM: Saving platform NVS memory
[12353.526717] Disabling non-boot CPUs ...
[12353.628483] smpboot: CPU 1 is now offline
[12353.731891] smpboot: CPU 2 is now offline
[12353.835306] smpboot: CPU 3 is now offline
[12353.838461] ACPI: Low-level resume complete
[12353.838609] PM: Restoring platform NVS memory
[12353.839507] Enabling non-boot CPUs ...
[12353.839578] smpboot: Booting Node 0 Processor 1 APIC 0x1
[12353.855111] Intel pstate controlling: cpu 1
[12353.855187] CPU1 is up
[12353.855216] smpboot: Booting Node 0 Processor 2 APIC 0x2
[12353.870068] Intel pstate controlling: cpu 2
[12353.870125] CPU2 is up
[12353.870147] smpboot: Booting Node 0 Processor 3 APIC 0x3
[12353.884764] Intel pstate controlling: cpu 3
[12353.884810] CPU3 is up
[12353.890390] ACPI: Waking up from system sleep state S3
[12353.932648] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[12353.972682] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[12353.999457] PM: noirq resume of devices complete after 104.426 msecs
[12353.999580] PM: early resume of devices complete after 0.107 msecs
[12353.999599] i915 0000:00:02.0: setting latency timer to 64
[12353.999687] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
[12354.002245] xhci_hcd 0000:00:14.0: setting latency timer to 64
[12354.002307] mei_me 0000:00:16.0: irq 61 for MSI/MSI-X
[12354.002670] ahci 0000:00:1f.2: setting latency timer to 64
[12354.002745] snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
[12354.002876] ehci-pci 0000:00:1d.0: setting latency timer to 64
[12354.010917] dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
[12354.010919] PM: Device 00:06 failed to resume: error -19
[12354.336247] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[12354.336955] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[12354.337296] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[12354.343080] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[12354.343377] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[12354.343456] ata2.00: configured for UDMA/133
[12354.343507] sd 1:0:0:0: [sda] Starting disk
[12354.416680] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[12354.430381] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401840
[12354.430382] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401880
[12354.430383] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374018c0
[12354.430384] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0f80
[12354.430385] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0fc0
[12354.430875] btusb 1-4:1.0: no reset_resume for driver btusb?
[12354.430876] btusb 1-4:1.1: no reset_resume for driver btusb?
[12354.589885] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[12354.604614] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef040
[12354.604615] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef000
[12354.604619] usb 1-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
[12354.604627] usb 1-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
[12354.763352] usb 1-8: reset high-speed USB device number 4 using xhci_hcd
[12354.782404] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374a4f00
[12354.785259] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[12354.785399] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[12354.936831] usb 1-7: reset full-speed USB device number 13 using xhci_hcd
[12354.950568] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173800
[12354.950569] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173840
[12354.950574] usb 1-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[12354.955593] PM: resume of devices complete after 955.239 msecs
[12354.956074] PM: Finishing wakeup.
[12354.956428] iwlwifi 0000:01:00.0: no hotplug settings from platform
[12354.956075] Restarting tasks ... done.
[12354.956739] video LNXVIDEO:00: Restoring backlight state
[12354.958668] pci_bus 0000:01: Allocating resources
[12354.958685] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[12354.958714] pci 0000:00:00.0: no hotplug settings from platform
[12354.958716] pci 0000:00:00.0: using default PCI settings
[12354.958722] i915 0000:00:02.0: no hotplug settings from platform
[12354.958723] i915 0000:00:02.0: using default PCI settings
[12354.958729] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[12354.958732] pci 0000:00:04.0: no hotplug settings from platform
[12354.958734] pci 0000:00:04.0: using default PCI settings
[12354.958739] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[12354.958741] xhci_hcd 0000:00:14.0: using default PCI settings
[12354.958747] mei_me 0000:00:16.0: no hotplug settings from platform
[12354.958749] mei_me 0000:00:16.0: using default PCI settings
[12354.958756] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[12354.958759] pcieport 0000:00:1c.0: no hotplug settings from platform
[12354.958768] iwlwifi 0000:01:00.0: no hotplug settings from platform
[12354.958772] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[12354.958774] ehci-pci 0000:00:1d.0: using default PCI settings
[12354.958781] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[12354.958783] lpc_ich 0000:00:1f.0: using default PCI settings
[12354.958793] ahci 0000:00:1f.2: no hotplug settings from platform
[12354.958795] ahci 0000:00:1f.2: using default PCI settings
[12354.958801] pci 0000:00:1f.3: no hotplug settings from platform
[12354.958803] pci 0000:00:1f.3: using default PCI settings
[12354.958810] pci 0000:00:1f.6: no hotplug settings from platform
[12354.958811] pci 0000:00:1f.6: using default PCI settings
[12354.959863] pci_bus 0000:01: Allocating resources
[12354.959877] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[12354.959886] pci 0000:00:00.0: no hotplug settings from platform
[12354.959887] pci 0000:00:00.0: using default PCI settings
[12354.959892] i915 0000:00:02.0: no hotplug settings from platform
[12354.959893] i915 0000:00:02.0: using default PCI settings
[12354.959898] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[12354.959901] pci 0000:00:04.0: no hotplug settings from platform
[12354.959903] pci 0000:00:04.0: using default PCI settings
[12354.959908] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[12354.959909] xhci_hcd 0000:00:14.0: using default PCI settings
[12354.959915] mei_me 0000:00:16.0: no hotplug settings from platform
[12354.959916] mei_me 0000:00:16.0: using default PCI settings
[12354.959922] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[12354.959925] pcieport 0000:00:1c.0: no hotplug settings from platform
[12354.959934] iwlwifi 0000:01:00.0: no hotplug settings from platform
[12354.959937] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[12354.959938] ehci-pci 0000:00:1d.0: using default PCI settings
[12354.959945] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[12354.959947] lpc_ich 0000:00:1f.0: using default PCI settings
[12354.959956] ahci 0000:00:1f.2: no hotplug settings from platform
[12354.959957] ahci 0000:00:1f.2: using default PCI settings
[12354.959963] pci 0000:00:1f.3: no hotplug settings from platform
[12354.959964] pci 0000:00:1f.3: using default PCI settings
[12354.959970] pci 0000:00:1f.6: no hotplug settings from platform
[12354.959972] pci 0000:00:1f.6: using default PCI settings
[12354.968870] Bluetooth: hci0: read Intel version: 370710018002030d00
[12354.968932] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[12355.109806] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[12355.370434] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[12460.461934] mce: [Hardware Error]: Machine check events logged
[13043.616553] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[13043.619865] PM: Syncing filesystems ... done.
[13043.781260] PM: Preparing system for mem sleep
[13043.781485] Freezing user space processes ... (elapsed 0.001 seconds) done.
[13043.782854] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[13043.783952] PM: Entering mem sleep
[13043.783991] Suspending console(s) (use no_console_suspend to debug)
[13043.813919] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[13043.815272] sd 1:0:0:0: [sda] Stopping disk
[13043.870836] mei_me 0000:00:16.0: suspend
[13043.983087] PM: suspend of devices complete after 198.729 msecs
[13043.983201] PM: late suspend of devices complete after 0.112 msecs
[13043.996624] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[13044.023129] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[13044.036772] PM: noirq suspend of devices complete after 53.526 msecs
[13044.037063] ACPI: Preparing to enter system sleep state S3
[13044.037358] PM: Saving platform NVS memory
[13044.037957] Disabling non-boot CPUs ...
[13044.039218] smpboot: CPU 1 is now offline
[13044.040957] smpboot: CPU 2 is now offline
[13044.143159] smpboot: CPU 3 is now offline
[13044.146319] ACPI: Low-level resume complete
[13044.146469] PM: Restoring platform NVS memory
[13044.147360] Enabling non-boot CPUs ...
[13044.147429] smpboot: Booting Node 0 Processor 1 APIC 0x1
[13044.162910] Intel pstate controlling: cpu 1
[13044.162990] CPU1 is up
[13044.163020] smpboot: Booting Node 0 Processor 2 APIC 0x2
[13044.177869] Intel pstate controlling: cpu 2
[13044.177925] CPU2 is up
[13044.177948] smpboot: Booting Node 0 Processor 3 APIC 0x3
[13044.192667] Intel pstate controlling: cpu 3
[13044.192713] CPU3 is up
[13044.198323] ACPI: Waking up from system sleep state S3
[13044.243841] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[13044.283856] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[13044.310638] PM: noirq resume of devices complete after 105.784 msecs
[13044.310757] PM: early resume of devices complete after 0.102 msecs
[13044.310775] i915 0000:00:02.0: setting latency timer to 64
[13044.310841] xhci_hcd 0000:00:14.0: setting latency timer to 64
[13044.310867] mei_me 0000:00:16.0: irq 60 for MSI/MSI-X
[13044.310876] snd_hda_intel 0000:00:03.0: irq 61 for MSI/MSI-X
[13044.310931] ahci 0000:00:1f.2: setting latency timer to 64
[13044.311022] snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
[13044.311112] ehci-pci 0000:00:1d.0: setting latency timer to 64
[13044.319432] dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
[13044.319433] PM: Device 00:06 failed to resume: error -19
[13044.630754] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[13044.631741] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[13044.632080] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[13044.637752] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[13044.637972] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[13044.638024] ata2.00: configured for UDMA/133
[13044.638082] sd 1:0:0:0: [sda] Starting disk
[13044.724366] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[13044.738345] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401840
[13044.738346] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401880
[13044.738347] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374018c0
[13044.738348] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0f80
[13044.738348] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0fc0
[13044.738980] btusb 1-4:1.0: no reset_resume for driver btusb?
[13044.738981] btusb 1-4:1.1: no reset_resume for driver btusb?
[13044.897726] usb 1-8: reset high-speed USB device number 4 using xhci_hcd
[13044.916792] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374a4f00
[13045.071237] usb 1-7: reset full-speed USB device number 13 using xhci_hcd
[13045.085063] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173800
[13045.085064] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173840
[13045.085069] usb 1-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[13045.244723] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[13045.259444] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef040
[13045.259445] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef000
[13045.259451] usb 1-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
[13045.259452] usb 1-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
[13045.277159] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[13045.277298] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[13045.288597] PM: resume of devices complete after 977.047 msecs
[13045.288951] PM: Finishing wakeup.
[13045.288974] iwlwifi 0000:01:00.0: no hotplug settings from platform
[13045.289970] pci_bus 0000:01: Allocating resources
[13045.289986] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[13045.289995] pci 0000:00:00.0: no hotplug settings from platform
[13045.289997] pci 0000:00:00.0: using default PCI settings
[13045.290003] i915 0000:00:02.0: no hotplug settings from platform
[13045.290004] i915 0000:00:02.0: using default PCI settings
[13045.290011] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[13045.290014] pci 0000:00:04.0: no hotplug settings from platform
[13045.290016] pci 0000:00:04.0: using default PCI settings
[13045.290021] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[13045.290023] xhci_hcd 0000:00:14.0: using default PCI settings
[13045.290030] mei_me 0000:00:16.0: no hotplug settings from platform
[13045.290032] mei_me 0000:00:16.0: using default PCI settings
[13045.290038] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[13045.290042] pcieport 0000:00:1c.0: no hotplug settings from platform
[13045.290051] iwlwifi 0000:01:00.0: no hotplug settings from platform
[13045.290054] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[13045.290056] ehci-pci 0000:00:1d.0: using default PCI settings
[13045.290064] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[13045.290066] lpc_ich 0000:00:1f.0: using default PCI settings
[13045.290075] ahci 0000:00:1f.2: no hotplug settings from platform
[13045.290077] ahci 0000:00:1f.2: using default PCI settings
[13045.290083] pci 0000:00:1f.3: no hotplug settings from platform
[13045.290085] pci 0000:00:1f.3: using default PCI settings
[13045.290091] pci 0000:00:1f.6: no hotplug settings from platform
[13045.290093] pci 0000:00:1f.6: using default PCI settings
[13045.291079] pci_bus 0000:01: Allocating resources
[13045.291093] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[13045.291101] pci 0000:00:00.0: no hotplug settings from platform
[13045.291103] pci 0000:00:00.0: using default PCI settings
[13045.291108] i915 0000:00:02.0: no hotplug settings from platform
[13045.291109] i915 0000:00:02.0: using default PCI settings
[13045.291115] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[13045.291118] pci 0000:00:04.0: no hotplug settings from platform
[13045.291119] pci 0000:00:04.0: using default PCI settings
[13045.291125] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[13045.291126] xhci_hcd 0000:00:14.0: using default PCI settings
[13045.291132] mei_me 0000:00:16.0: no hotplug settings from platform
[13045.291134] mei_me 0000:00:16.0: using default PCI settings
[13045.291141] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[13045.291144] pcieport 0000:00:1c.0: no hotplug settings from platform
[13045.291152] iwlwifi 0000:01:00.0: no hotplug settings from platform
[13045.291155] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[13045.291157] ehci-pci 0000:00:1d.0: using default PCI settings
[13045.291164] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[13045.291166] lpc_ich 0000:00:1f.0: using default PCI settings
[13045.291174] ahci 0000:00:1f.2: no hotplug settings from platform
[13045.291176] ahci 0000:00:1f.2: using default PCI settings
[13045.291182] pci 0000:00:1f.3: no hotplug settings from platform
[13045.291183] pci 0000:00:1f.3: using default PCI settings
[13045.291189] pci 0000:00:1f.6: no hotplug settings from platform
[13045.291191] pci 0000:00:1f.6: using default PCI settings
[13045.288952] Restarting tasks ... done.
[13045.291995] video LNXVIDEO:00: Restoring backlight state
[13045.302436] Bluetooth: hci0: read Intel version: 370710018002030d00
[13045.302442] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[13045.458682] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[13045.921805] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[13205.167071] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[13205.168756] PM: Syncing filesystems ... done.
[13205.339048] PM: Preparing system for mem sleep
[13205.339260] Freezing user space processes ... (elapsed 0.001 seconds) done.
[13205.340514] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[13205.341622] PM: Entering mem sleep
[13205.341667] Suspending console(s) (use no_console_suspend to debug)
[13205.361283] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[13205.362611] sd 1:0:0:0: [sda] Stopping disk
[13205.418844] mei_me 0000:00:16.0: suspend
[13206.448101] PM: suspend of devices complete after 1105.319 msecs
[13206.448267] PM: late suspend of devices complete after 0.164 msecs
[13206.461653] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[13206.488144] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[13206.501879] PM: noirq suspend of devices complete after 53.566 msecs
[13206.502170] ACPI: Preparing to enter system sleep state S3
[13206.502466] PM: Saving platform NVS memory
[13206.503082] Disabling non-boot CPUs ...
[13206.604837] smpboot: CPU 1 is now offline
[13206.708254] smpboot: CPU 2 is now offline
[13206.709641] smpboot: CPU 3 is now offline
[13206.712810] ACPI: Low-level resume complete
[13206.712951] PM: Restoring platform NVS memory
[13206.713821] Enabling non-boot CPUs ...
[13206.713890] smpboot: Booting Node 0 Processor 1 APIC 0x1
[13206.729266] Intel pstate controlling: cpu 1
[13206.729343] CPU1 is up
[13206.729371] smpboot: Booting Node 0 Processor 2 APIC 0x2
[13206.744232] Intel pstate controlling: cpu 2
[13206.744289] CPU2 is up
[13206.744311] smpboot: Booting Node 0 Processor 3 APIC 0x3
[13206.758941] Intel pstate controlling: cpu 3
[13206.758988] CPU3 is up
[13206.764516] ACPI: Waking up from system sleep state S3
[13206.808994] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[13206.849021] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[13206.875795] PM: noirq resume of devices complete after 106.443 msecs
[13206.875919] PM: early resume of devices complete after 0.107 msecs
[13206.875939] i915 0000:00:02.0: setting latency timer to 64
[13206.876027] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
[13206.878545] xhci_hcd 0000:00:14.0: setting latency timer to 64
[13206.878713] mei_me 0000:00:16.0: irq 61 for MSI/MSI-X
[13206.878982] ahci 0000:00:1f.2: setting latency timer to 64
[13206.879166] snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
[13206.879211] ehci-pci 0000:00:1d.0: setting latency timer to 64
[13206.887118] dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
[13206.887119] PM: Device 00:06 failed to resume: error -19
[13207.199242] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[13207.200272] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[13207.200613] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[13207.206034] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[13207.206255] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[13207.206308] ata2.00: configured for UDMA/133
[13207.206360] sd 1:0:0:0: [sda] Starting disk
[13207.292926] usb 1-7: reset full-speed USB device number 13 using xhci_hcd
[13207.307004] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173800
[13207.307005] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173840
[13207.307030] usb 1-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[13207.466231] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[13207.480056] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401840
[13207.480058] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401880
[13207.480059] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374018c0
[13207.480060] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0f80
[13207.480061] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0fc0
[13207.480435] btusb 1-4:1.0: no reset_resume for driver btusb?
[13207.480436] btusb 1-4:1.1: no reset_resume for driver btusb?
[13207.639692] usb 1-8: reset high-speed USB device number 4 using xhci_hcd
[13207.658739] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374a4f00
[13207.813286] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[13207.828012] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef040
[13207.828013] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef000
[13207.828017] usb 1-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
[13207.828019] usb 1-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
[13207.845309] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[13207.845449] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[13207.857484] PM: resume of devices complete after 980.770 msecs
[13207.857904] PM: Finishing wakeup.
[13207.857927] iwlwifi 0000:01:00.0: no hotplug settings from platform
[13207.858922] pci_bus 0000:01: Allocating resources
[13207.858939] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[13207.858949] pci 0000:00:00.0: no hotplug settings from platform
[13207.858950] pci 0000:00:00.0: using default PCI settings
[13207.858956] i915 0000:00:02.0: no hotplug settings from platform
[13207.858958] i915 0000:00:02.0: using default PCI settings
[13207.858964] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[13207.858967] pci 0000:00:04.0: no hotplug settings from platform
[13207.858968] pci 0000:00:04.0: using default PCI settings
[13207.858974] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[13207.858975] xhci_hcd 0000:00:14.0: using default PCI settings
[13207.858982] mei_me 0000:00:16.0: no hotplug settings from platform
[13207.858984] mei_me 0000:00:16.0: using default PCI settings
[13207.858991] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[13207.858994] pcieport 0000:00:1c.0: no hotplug settings from platform
[13207.859003] iwlwifi 0000:01:00.0: no hotplug settings from platform
[13207.859006] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[13207.859008] ehci-pci 0000:00:1d.0: using default PCI settings
[13207.859016] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[13207.859017] lpc_ich 0000:00:1f.0: using default PCI settings
[13207.859027] ahci 0000:00:1f.2: no hotplug settings from platform
[13207.859029] ahci 0000:00:1f.2: using default PCI settings
[13207.859035] pci 0000:00:1f.3: no hotplug settings from platform
[13207.859037] pci 0000:00:1f.3: using default PCI settings
[13207.859043] pci 0000:00:1f.6: no hotplug settings from platform
[13207.859045] pci 0000:00:1f.6: using default PCI settings
[13207.857905] Restarting tasks ... done.
[13207.859806] video LNXVIDEO:00: Restoring backlight state
[13207.860118] pci_bus 0000:01: Allocating resources
[13207.860133] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[13207.860142] pci 0000:00:00.0: no hotplug settings from platform
[13207.860144] pci 0000:00:00.0: using default PCI settings
[13207.860149] i915 0000:00:02.0: no hotplug settings from platform
[13207.860150] i915 0000:00:02.0: using default PCI settings
[13207.860156] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[13207.860159] pci 0000:00:04.0: no hotplug settings from platform
[13207.860160] pci 0000:00:04.0: using default PCI settings
[13207.860166] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[13207.860167] xhci_hcd 0000:00:14.0: using default PCI settings
[13207.860174] mei_me 0000:00:16.0: no hotplug settings from platform
[13207.860175] mei_me 0000:00:16.0: using default PCI settings
[13207.860182] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[13207.860186] pcieport 0000:00:1c.0: no hotplug settings from platform
[13207.860194] iwlwifi 0000:01:00.0: no hotplug settings from platform
[13207.860197] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[13207.860199] ehci-pci 0000:00:1d.0: using default PCI settings
[13207.860206] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[13207.860208] lpc_ich 0000:00:1f.0: using default PCI settings
[13207.860217] ahci 0000:00:1f.2: no hotplug settings from platform
[13207.860219] ahci 0000:00:1f.2: using default PCI settings
[13207.860225] pci 0000:00:1f.3: no hotplug settings from platform
[13207.860227] pci 0000:00:1f.3: using default PCI settings
[13207.860233] pci 0000:00:1f.6: no hotplug settings from platform
[13207.860235] pci 0000:00:1f.6: using default PCI settings
[13207.873037] Bluetooth: hci0: read Intel version: 370710018002030d00
[13207.873067] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[13207.965121] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[13208.066623] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[14835.787382] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[18477.985926] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[18477.987841] PM: Syncing filesystems ... done.
[18478.159739] PM: Preparing system for mem sleep
[18478.160057] Freezing user space processes ... (elapsed 0.001 seconds) done.
[18478.161439] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[18478.162533] PM: Entering mem sleep
[18478.162576] Suspending console(s) (use no_console_suspend to debug)
[18478.192575] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[18478.193978] sd 1:0:0:0: [sda] Stopping disk
[18478.249866] mei_me 0000:00:16.0: suspend
[18479.312507] PM: suspend of devices complete after 1148.753 msecs
[18479.312684] PM: late suspend of devices complete after 0.175 msecs
[18479.326122] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[18479.352567] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[18479.366172] PM: noirq suspend of devices complete after 53.443 msecs
[18479.366464] ACPI: Preparing to enter system sleep state S3
[18479.366761] PM: Saving platform NVS memory
[18479.367383] Disabling non-boot CPUs ...
[18479.469254] smpboot: CPU 1 is now offline
[18479.572678] smpboot: CPU 2 is now offline
[18479.574072] smpboot: CPU 3 is now offline
[18479.577223] ACPI: Low-level resume complete
[18479.577306] PM: Restoring platform NVS memory
[18479.578044] Enabling non-boot CPUs ...
[18479.578114] smpboot: Booting Node 0 Processor 1 APIC 0x1
[18479.593898] Intel pstate controlling: cpu 1
[18479.593977] CPU1 is up
[18479.594005] smpboot: Booting Node 0 Processor 2 APIC 0x2
[18479.608949] Intel pstate controlling: cpu 2
[18479.609006] CPU2 is up
[18479.609028] smpboot: Booting Node 0 Processor 3 APIC 0x3
[18479.623753] Intel pstate controlling: cpu 3
[18479.623803] CPU3 is up
[18479.629557] ACPI: Waking up from system sleep state S3
[18479.669802] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[18479.709837] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[18479.736659] PM: noirq resume of devices complete after 104.033 msecs
[18479.736783] PM: early resume of devices complete after 0.107 msecs
[18479.736802] i915 0000:00:02.0: setting latency timer to 64
[18479.736889] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
[18479.736927] xhci_hcd 0000:00:14.0: setting latency timer to 64
[18479.736949] mei_me 0000:00:16.0: irq 61 for MSI/MSI-X
[18479.737024] snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
[18479.737060] ahci 0000:00:1f.2: setting latency timer to 64
[18479.737162] ehci-pci 0000:00:1d.0: setting latency timer to 64
[18479.747309] dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
[18479.747311] PM: Device 00:06 failed to resume: error -19
[18480.070138] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[18480.070862] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[18480.071204] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[18480.076567] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[18480.076721] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[18480.076775] ata2.00: configured for UDMA/133
[18480.076827] sd 1:0:0:0: [sda] Starting disk
[18480.150340] usb 1-8: reset high-speed USB device number 4 using xhci_hcd
[18480.169378] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374a4f00
[18480.323756] usb 1-7: reset full-speed USB device number 13 using xhci_hcd
[18480.337518] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173800
[18480.337520] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173840
[18480.337530] usb 1-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[18480.497230] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[18480.511004] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401840
[18480.511006] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401880
[18480.511007] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374018c0
[18480.511008] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0f80
[18480.511010] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0fc0
[18480.511410] btusb 1-4:1.0: no reset_resume for driver btusb?
[18480.511412] btusb 1-4:1.1: no reset_resume for driver btusb?
[18480.670874] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[18480.685453] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef040
[18480.685454] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef000
[18480.685456] usb 1-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
[18480.685459] usb 1-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
[18480.702320] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[18480.702459] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[18480.714471] PM: resume of devices complete after 976.897 msecs
[18480.714825] PM: Finishing wakeup.
[18480.714847] iwlwifi 0000:01:00.0: no hotplug settings from platform
[18480.715841] pci_bus 0000:01: Allocating resources
[18480.715857] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[18480.715867] pci 0000:00:00.0: no hotplug settings from platform
[18480.715868] pci 0000:00:00.0: using default PCI settings
[18480.715874] i915 0000:00:02.0: no hotplug settings from platform
[18480.715875] i915 0000:00:02.0: using default PCI settings
[18480.715881] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[18480.715885] pci 0000:00:04.0: no hotplug settings from platform
[18480.715886] pci 0000:00:04.0: using default PCI settings
[18480.715892] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[18480.715893] xhci_hcd 0000:00:14.0: using default PCI settings
[18480.715900] mei_me 0000:00:16.0: no hotplug settings from platform
[18480.715902] mei_me 0000:00:16.0: using default PCI settings
[18480.715909] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[18480.715912] pcieport 0000:00:1c.0: no hotplug settings from platform
[18480.715921] iwlwifi 0000:01:00.0: no hotplug settings from platform
[18480.715925] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[18480.715926] ehci-pci 0000:00:1d.0: using default PCI settings
[18480.715934] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[18480.715936] lpc_ich 0000:00:1f.0: using default PCI settings
[18480.715945] ahci 0000:00:1f.2: no hotplug settings from platform
[18480.715947] ahci 0000:00:1f.2: using default PCI settings
[18480.715953] pci 0000:00:1f.3: no hotplug settings from platform
[18480.715955] pci 0000:00:1f.3: using default PCI settings
[18480.715971] pci 0000:00:1f.6: no hotplug settings from platform
[18480.715973] pci 0000:00:1f.6: using default PCI settings
[18480.717216] pci_bus 0000:01: Allocating resources
[18480.717231] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[18480.717240] pci 0000:00:00.0: no hotplug settings from platform
[18480.717241] pci 0000:00:00.0: using default PCI settings
[18480.717246] i915 0000:00:02.0: no hotplug settings from platform
[18480.717248] i915 0000:00:02.0: using default PCI settings
[18480.717253] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[18480.717256] pci 0000:00:04.0: no hotplug settings from platform
[18480.717258] pci 0000:00:04.0: using default PCI settings
[18480.717351] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[18480.717353] xhci_hcd 0000:00:14.0: using default PCI settings
[18480.717359] mei_me 0000:00:16.0: no hotplug settings from platform
[18480.717361] mei_me 0000:00:16.0: using default PCI settings
[18480.717367] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[18480.717370] pcieport 0000:00:1c.0: no hotplug settings from platform
[18480.717377] iwlwifi 0000:01:00.0: no hotplug settings from platform
[18480.717381] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[18480.717382] ehci-pci 0000:00:1d.0: using default PCI settings
[18480.717390] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[18480.717392] lpc_ich 0000:00:1f.0: using default PCI settings
[18480.717401] ahci 0000:00:1f.2: no hotplug settings from platform
[18480.717403] ahci 0000:00:1f.2: using default PCI settings
[18480.717409] pci 0000:00:1f.3: no hotplug settings from platform
[18480.717410] pci 0000:00:1f.3: using default PCI settings
[18480.717417] pci 0000:00:1f.6: no hotplug settings from platform
[18480.717418] pci 0000:00:1f.6: using default PCI settings
[18480.714826] Restarting tasks ... done.
[18480.718549] video LNXVIDEO:00: Restoring backlight state
[18480.727543] Bluetooth: hci0: read Intel version: 370710018002030d00
[18480.727547] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[18480.825640] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[18481.327810] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[18561.832501] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
[18568.025688] PM: Syncing filesystems ... done.
[18568.143466] PM: Preparing system for mem sleep
[18568.143684] Freezing user space processes ... (elapsed 0.001 seconds) done.
[18568.145147] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[18568.146313] PM: Entering mem sleep
[18568.146362] Suspending console(s) (use no_console_suspend to debug)
[18568.165414] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[18568.167584] sd 1:0:0:0: [sda] Stopping disk
[18568.222134] mei_me 0000:00:16.0: suspend
[18569.292177] PM: suspend of devices complete after 1144.667 msecs
[18569.292352] PM: late suspend of devices complete after 0.174 msecs
[18569.305735] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[18569.332231] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[18569.346057] PM: noirq suspend of devices complete after 53.659 msecs
[18569.346348] ACPI: Preparing to enter system sleep state S3
[18569.346643] PM: Saving platform NVS memory
[18569.347262] Disabling non-boot CPUs ...
[18569.448940] smpboot: CPU 1 is now offline
[18569.552341] smpboot: CPU 2 is now offline
[18569.655755] smpboot: CPU 3 is now offline
[18569.658889] ACPI: Low-level resume complete
[18569.659032] PM: Restoring platform NVS memory
[18569.659927] Enabling non-boot CPUs ...
[18569.660000] smpboot: Booting Node 0 Processor 1 APIC 0x1
[18569.675328] Intel pstate controlling: cpu 1
[18569.675408] CPU1 is up
[18569.675437] smpboot: Booting Node 0 Processor 2 APIC 0x2
[18569.690294] Intel pstate controlling: cpu 2
[18569.690351] CPU2 is up
[18569.690372] smpboot: Booting Node 0 Processor 3 APIC 0x3
[18569.704994] Intel pstate controlling: cpu 3
[18569.705040] CPU3 is up
[18569.710612] ACPI: Waking up from system sleep state S3
[18569.753079] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[18569.793130] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[18569.819903] PM: noirq resume of devices complete after 104.925 msecs
[18569.820026] PM: early resume of devices complete after 0.106 msecs
[18569.820048] i915 0000:00:02.0: setting latency timer to 64
[18569.820054] xhci_hcd 0000:00:14.0: setting latency timer to 64
[18569.820126] mei_me 0000:00:16.0: irq 60 for MSI/MSI-X
[18569.820146] snd_hda_intel 0000:00:03.0: irq 61 for MSI/MSI-X
[18569.820192] ahci 0000:00:1f.2: setting latency timer to 64
[18569.820312] snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
[18569.820425] ehci-pci 0000:00:1d.0: setting latency timer to 64
[18569.827842] dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
[18569.827843] PM: Device 00:06 failed to resume: error -19
[18570.140015] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[18570.141086] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[18570.141430] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[18570.146850] ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[18570.147162] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[18570.147226] ata2.00: configured for UDMA/133
[18570.160135] sd 1:0:0:0: [sda] Starting disk
[18570.233704] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[18570.247442] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401840
[18570.247443] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037401880
[18570.247443] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374018c0
[18570.247444] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0f80
[18570.247445] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374c0fc0
[18570.247942] btusb 1-4:1.0: no reset_resume for driver btusb?
[18570.247943] btusb 1-4:1.1: no reset_resume for driver btusb?
[18570.407017] usb 1-7: reset full-speed USB device number 13 using xhci_hcd
[18570.420834] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173800
[18570.420835] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880234173840
[18570.420846] usb 1-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[18570.580514] usb 1-8: reset high-speed USB device number 4 using xhci_hcd
[18570.599513] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800374a4f00
[18570.753964] usb 1-6: reset full-speed USB device number 3 using xhci_hcd
[18570.768741] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef040
[18570.768742] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802510ef000
[18570.768748] usb 1-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
[18570.768749] usb 1-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
[18570.787557] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[18570.787697] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[18570.798472] PM: resume of devices complete after 977.653 msecs
[18570.798894] iwlwifi 0000:01:00.0: no hotplug settings from platform
[18570.799551] pci_bus 0000:01: Allocating resources
[18570.799563] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[18570.799568] pci 0000:00:00.0: no hotplug settings from platform
[18570.799569] pci 0000:00:00.0: using default PCI settings
[18570.799573] i915 0000:00:02.0: no hotplug settings from platform
[18570.799574] i915 0000:00:02.0: using default PCI settings
[18570.799578] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[18570.799580] pci 0000:00:04.0: no hotplug settings from platform
[18570.799581] pci 0000:00:04.0: using default PCI settings
[18570.799585] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[18570.799586] xhci_hcd 0000:00:14.0: using default PCI settings
[18570.799591] mei_me 0000:00:16.0: no hotplug settings from platform
[18570.799592] mei_me 0000:00:16.0: using default PCI settings
[18570.799598] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[18570.799600] pcieport 0000:00:1c.0: no hotplug settings from platform
[18570.799605] iwlwifi 0000:01:00.0: no hotplug settings from platform
[18570.799608] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[18570.799609] ehci-pci 0000:00:1d.0: using default PCI settings
[18570.799615] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[18570.799616] lpc_ich 0000:00:1f.0: using default PCI settings
[18570.799623] ahci 0000:00:1f.2: no hotplug settings from platform
[18570.799624] ahci 0000:00:1f.2: using default PCI settings
[18570.799629] pci 0000:00:1f.3: no hotplug settings from platform
[18570.799629] pci 0000:00:1f.3: using default PCI settings
[18570.799634] pci 0000:00:1f.6: no hotplug settings from platform
[18570.799635] pci 0000:00:1f.6: using default PCI settings
[18570.800266] pci_bus 0000:01: Allocating resources
[18570.800276] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[18570.800280] pci 0000:00:00.0: no hotplug settings from platform
[18570.800281] pci 0000:00:00.0: using default PCI settings
[18570.800284] i915 0000:00:02.0: no hotplug settings from platform
[18570.800285] i915 0000:00:02.0: using default PCI settings
[18570.800290] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[18570.800292] pci 0000:00:04.0: no hotplug settings from platform
[18570.800293] pci 0000:00:04.0: using default PCI settings
[18570.800296] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[18570.800297] xhci_hcd 0000:00:14.0: using default PCI settings
[18570.800302] mei_me 0000:00:16.0: no hotplug settings from platform
[18570.800303] mei_me 0000:00:16.0: using default PCI settings
[18570.800308] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[18570.800310] pcieport 0000:00:1c.0: no hotplug settings from platform
[18570.800316] iwlwifi 0000:01:00.0: no hotplug settings from platform
[18570.800318] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[18570.800319] ehci-pci 0000:00:1d.0: using default PCI settings
[18570.800325] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[18570.800326] lpc_ich 0000:00:1f.0: using default PCI settings
[18570.800333] ahci 0000:00:1f.2: no hotplug settings from platform
[18570.800334] ahci 0000:00:1f.2: using default PCI settings
[18570.800339] pci 0000:00:1f.3: no hotplug settings from platform
[18570.800340] pci 0000:00:1f.3: using default PCI settings
[18570.800345] pci 0000:00:1f.6: no hotplug settings from platform
[18570.800346] pci 0000:00:1f.6: using default PCI settings
[18570.800365] PM: Finishing wakeup.
[18570.800366] Restarting tasks ... done.
[18570.803111] video LNXVIDEO:00: Restoring backlight state
[18570.811812] Bluetooth: hci0: read Intel version: 370710018002030d00
[18570.811844] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[18570.913915] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[18571.414387] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[18579.362982] wlp1s0: authenticate with 6e:ad:f8:22:f5:bd
[18579.363896] wlp1s0: send auth to 6e:ad:f8:22:f5:bd (try 1/3)
[18579.372944] wlp1s0: authenticated
[18579.374154] wlp1s0: associate with 6e:ad:f8:22:f5:bd (try 1/3)
[18579.385747] wlp1s0: RX AssocResp from 6e:ad:f8:22:f5:bd (capab=0x431 status=0 aid=1)
[18579.388276] wlp1s0: associated