early console in setup code Probing EDD (edd=off to disable)... ok early console in decompress_kernel Decompressing Linux... Parsing ELF... done. Booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.14.0-rc6-wl-ath-03638-g165e0ff (kbuild@cairo) (gcc version 4.8.2 (Debian 4.8.2-16) ) #1 SMP Fri Mar 14 00:36:52 CST 2014 [ 0.000000] Command line: user=lkp job=/lkp/scheduled/kbuildx-1/cyclic_fileio-600s-100%-1HDD-xfs-64G-1024-rndrd-sync-HEAD-165e0ff526fe806c4e14d02b9eccdfeb35449175.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-lkp/165e0ff526fe806c4e14d02b9eccdfeb35449175/vmlinuz-3.14.0-rc6-wl-ath-03638-g165e0ff kconfig=x86_64-lkp commit=165e0ff526fe806c4e14d02b9eccdfeb35449175 modules_initrd=/kernel/x86_64-lkp/165e0ff526fe806c4e14d02b9eccdfeb35449175/modules.cgz max_uptime=3743 RESULT_ROOT=/lkp/result/kbuildx/sysbench/fileio/600s-100%-1HDD-xfs-64G-1024-rndrd-sync/x86_64-lkp/165e0ff526fe806c4e14d02b9eccdfeb35449175/0 initrd=/kernel-tests/initrd/lkp-rootfs.cgz root=/dev/ram0 ip=::::kbuildx-1::dhcp oops=panic earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfffdfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfffe000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fffffff] usable [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x420000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdfffe max_arch_pfn = 0x400000000 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fda90-0x000fda9f] mapped at [ffff8800000fda90] [ 0.000000] mpc: fdaa0-fdbe4 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02668000, 0x02668fff] PGTABLE [ 0.000000] BRK [0x02669000, 0x02669fff] PGTABLE [ 0.000000] BRK [0x0266a000, 0x0266afff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41fe00000-0x41fffffff] [ 0.000000] [mem 0x41fe00000-0x41fffffff] page 2M [ 0.000000] BRK [0x0266b000, 0x0266bfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41fdfffff] [ 0.000000] [mem 0x41c000000-0x41fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff] [ 0.000000] [mem 0x400000000-0x41bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdfffdfff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xdfdfffff] page 2M [ 0.000000] [mem 0xdfe00000-0xdfffdfff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M [ 0.000000] BRK [0x0266c000, 0x0266cfff] PGTABLE [ 0.000000] BRK [0x0266d000, 0x0266dfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x73014000-0x7fffffff] [ 0.000000] ACPI: RSDP 0x00000000000FD880 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x00000000DFFFE380 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x00000000DFFFFF80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x00000000DFFFE3C0 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0x00000000DFFFFF40 000040 [ 0.000000] ACPI: SSDT 0x00000000DFFFF6E0 000858 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x00000000DFFFF5B0 000090 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x00000000DFFFF570 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5f3000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41fffffff] [ 0.000000] NODE_DATA [mem 0x41ffed000-0x41fff1fff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 4:1ffe5001, primary cpu clock [ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f600000-ffff88041f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x41fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xdfffdfff] [ 0.000000] node 0: [mem 0x100000000-0x41fffffff] [ 0.000000] On node 0 totalpages: 4194204 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14272 pages used for memmap [ 0.000000] DMA32 zone: 913406 pages, LIFO batch:31 [ 0.000000] Normal zone: 51200 pages used for memmap [ 0.000000] Normal zone: 3276800 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5f3000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff5f2000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfffe000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfeffbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88041fc00000 s81088 r8192 d21312 u524288 [ 0.000000] pcpu-alloc: s81088 r8192 d21312 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 41fc0d040 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4128647 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: user=lkp job=/lkp/scheduled/kbuildx-1/cyclic_fileio-600s-100%-1HDD-xfs-64G-1024-rndrd-sync-HEAD-165e0ff526fe806c4e14d02b9eccdfeb35449175.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-lkp/165e0ff526fe806c4e14d02b9eccdfeb35449175/vmlinuz-3.14.0-rc6-wl-ath-03638-g165e0ff kconfig=x86_64-lkp commit=165e0ff526fe806c4e14d02b9eccdfeb35449175 modules_initrd=/kernel/x86_64-lkp/165e0ff526fe806c4e14d02b9eccdfeb35449175/modules.cgz max_uptime=3743 RESULT_ROOT=/lkp/result/kbuildx/sysbench/fileio/600s-100%-1HDD-xfs-64G-1024-rndrd-sync/x86_64-lkp/165e0ff526fe806c4e14d02b9eccdfeb35449175/0 initrd=/kernel-tests/initrd/lkp-rootfs.cgz root=/dev/ram0 ip=::::kbuildx-1::dhcp oops=panic earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 16211860K/16776816K available (10589K kernel code, 1254K rwdata, 4272K rodata, 1440K init, 1760K bss, 564956K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.14.0-rc6-wl-ath-03638-g165e0ff (kbuild@cairo) (gcc version 4.8.2 (Debian 4.8.2-16) ) #1 SMP Fri Mar 14 00:36:52 CST 2014 [ 0.000000] Command line: user=lkp job=/lkp/scheduled/kbuildx-1/cyclic_fileio-600s-100%-1HDD-xfs-64G-1024-rndrd-sync-HEAD-165e0ff526fe806c4e14d02b9eccdfeb35449175.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-lkp/165e0ff526fe806c4e14d02b9eccdfeb35449175/vmlinuz-3.14.0-rc6-wl-ath-03638-g165e0ff kconfig=x86_64-lkp commit=165e0ff526fe806c4e14d02b9eccdfeb35449175 modules_initrd=/kernel/x86_64-lkp/165e0ff526fe806c4e14d02b9eccdfeb35449175/modules.cgz max_uptime=3743 RESULT_ROOT=/lkp/result/kbuildx/sysbench/fileio/600s-100%-1HDD-xfs-64G-1024-rndrd-sync/x86_64-lkp/165e0ff526fe806c4e14d02b9eccdfeb35449175/0 initrd=/kernel-tests/initrd/lkp-rootfs.cgz root=/dev/ram0 ip=::::kbuildx-1::dhcp oops=panic earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfffdfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfffe000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fffffff] usable [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x420000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdfffe max_arch_pfn = 0x400000000 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fda90-0x000fda9f] mapped at [ffff8800000fda90] [ 0.000000] mpc: fdaa0-fdbe4 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x02668000, 0x02668fff] PGTABLE [ 0.000000] BRK [0x02669000, 0x02669fff] PGTABLE [ 0.000000] BRK [0x0266a000, 0x0266afff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41fe00000-0x41fffffff] [ 0.000000] [mem 0x41fe00000-0x41fffffff] page 2M [ 0.000000] BRK [0x0266b000, 0x0266bfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41fdfffff] [ 0.000000] [mem 0x41c000000-0x41fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff] [ 0.000000] [mem 0x400000000-0x41bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdfffdfff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xdfdfffff] page 2M [ 0.000000] [mem 0xdfe00000-0xdfffdfff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M [ 0.000000] BRK [0x0266c000, 0x0266cfff] PGTABLE [ 0.000000] BRK [0x0266d000, 0x0266dfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x73014000-0x7fffffff] [ 0.000000] ACPI: RSDP 0x00000000000FD880 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x00000000DFFFE380 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x00000000DFFFFF80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x00000000DFFFE3C0 0011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0x00000000DFFFFF40 000040 [ 0.000000] ACPI: SSDT 0x00000000DFFFF6E0 000858 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x00000000DFFFF5B0 000090 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x00000000DFFFF570 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5f3000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41fffffff] [ 0.000000] NODE_DATA [mem 0x41ffed000-0x41fff1fff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 4:1ffe5001, primary cpu clock [ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f600000-ffff88041f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x41fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xdfffdfff] [ 0.000000] node 0: [mem 0x100000000-0x41fffffff] [ 0.000000] On node 0 totalpages: 4194204 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14272 pages used for memmap [ 0.000000] DMA32 zone: 913406 pages, LIFO batch:31 [ 0.000000] Normal zone: 51200 pages used for memmap [ 0.000000] Normal zone: 3276800 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5f3000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff5f2000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfffe000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfeffbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88041fc00000 s81088 r8192 d21312 u524288 [ 0.000000] pcpu-alloc: s81088 r8192 d21312 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 41fc0d040 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4128647 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: user=lkp job=/lkp/scheduled/kbuildx-1/cyclic_fileio-600s-100%-1HDD-xfs-64G-1024-rndrd-sync-HEAD-165e0ff526fe806c4e14d02b9eccdfeb35449175.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-lkp/165e0ff526fe806c4e14d02b9eccdfeb35449175/vmlinuz-3.14.0-rc6-wl-ath-03638-g165e0ff kconfig=x86_64-lkp commit=165e0ff526fe806c4e14d02b9eccdfeb35449175 modules_initrd=/kernel/x86_64-lkp/165e0ff526fe806c4e14d02b9eccdfeb35449175/modules.cgz max_uptime=3743 RESULT_ROOT=/lkp/result/kbuildx/sysbench/fileio/600s-100%-1HDD-xfs-64G-1024-rndrd-sync/x86_64-lkp/165e0ff526fe806c4e14d02b9eccdfeb35449175/0 initrd=/kernel-tests/initrd/lkp-rootfs.cgz root=/dev/ram0 ip=::::kbuildx-1::dhcp oops=panic earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 16211860K/16776816K available (10589K kernel code, 1254K rwdata, 4272K rodata, 1440K init, 1760K bss, 564956K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] console [ttyS0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2693.656 MHz processor [ 0.008000] Calibrating delay loop (skipped) preset value.. 5387.31 BogoMIPS (lpj=10774624) [ 0.008000] pid_max: default: 32768 minimum: 301 [ 0.008000] ACPI: Core revision 20140214 [ 0.009091] ACPI: All ACPI Tables successfully acquired [ 0.011304] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.028311] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.040626] Mount-cache hash table entries: 256 [ 0.041992] Initializing cgroup subsys memory [ 0.042941] Initializing cgroup subsys devices [ 0.043893] Initializing cgroup subsys freezer [ 0.044007] Initializing cgroup subsys blkio [ 0.044942] Initializing cgroup subsys perf_event [ 0.045923] Initializing cgroup subsys hugetlb [ 0.046980] mce: CPU supports 10 MCE banks [ 0.048051] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.048051] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.048051] tlb_flushall_shift: 6 [ 0.050994] Freeing SMP alternatives memory: 44K (ffffffff824a3000 - ffffffff824ae000) [ 0.058583] ftrace: allocating 40517 entries in 159 pages [ 0.068231] Getting VERSION: 50014 [ 0.069068] Getting VERSION: 50014 [ 0.069875] Getting ID: 0 [ 0.070599] Getting ID: ff000000 [ 0.072011] Getting LVT0: 8700 [ 0.072789] Getting LVT1: 8400 [ 0.073613] enabled ExtINT on CPU#0 [ 0.075197] ENABLING IO-APIC IRQs [ 0.076006] init IO_APIC IRQs [ 0.076770] apic 0 pin 0 not connected [ 0.077628] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.079349] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.080018] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.081865] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.084024] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.088025] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.090672] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.092018] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.093736] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.096018] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.097747] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.099520] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.100016] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.101794] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.104016] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.105774] apic 0 pin 16 not connected [ 0.106646] apic 0 pin 17 not connected [ 0.108004] apic 0 pin 18 not connected [ 0.108885] apic 0 pin 19 not connected [ 0.109784] apic 0 pin 20 not connected [ 0.110659] apic 0 pin 21 not connected [ 0.112004] apic 0 pin 22 not connected [ 0.112885] apic 0 pin 23 not connected [ 0.113900] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.115155] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.117795] Using local APIC timer interrupts. [ 0.117795] calibrating APIC timer ... [ 0.120000] ... lapic delta = 6250079 [ 0.120000] ... PM-Timer delta = 357959 [ 0.120000] ... PM-Timer result ok [ 0.120000] ..... delta 6250079 [ 0.120000] ..... mult: 268438849 [ 0.120000] ..... calibration result: 4000050 [ 0.120000] ..... CPU clock speed is 2693.2525 MHz. [ 0.120000] ..... host bus clock speed is 1000.0050 MHz. [ 0.120064] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.124711] x86: Booting SMP configuration: [ 0.126173] .... node #0, CPUs: #1 [ 0.008000] kvm-clock: cpu 1, msr 4:1ffe5041, secondary cpu clock [ 0.008000] masked ExtINT on CPU#1 [ 0.140071] KVM setup async PF for cpu 1 [ 0.141474] #2 [ 0.141475] kvm-stealtime: cpu 1, msr 41fc8d040 [ 0.008000] kvm-clock: cpu 2, msr 4:1ffe5081, secondary cpu clock [ 0.008000] masked ExtINT on CPU#2 [ 0.156058] KVM setup async PF for cpu 2 [ 0.157093] #3 [ 0.157093] kvm-stealtime: cpu 2, msr 41fd0d040 [ 0.008000] kvm-clock: cpu 3, msr 4:1ffe50c1, secondary cpu clock [ 0.008000] masked ExtINT on CPU#3 [ 0.172076] x86: Booted up 1 node, 4 CPUs [ 0.172050] KVM setup async PF for cpu 3 [ 0.172050] kvm-stealtime: cpu 3, msr 41fd8d040 [ 0.176004] smpboot: Total of 4 processors activated (21549.24 BogoMIPS) [ 0.180185] devtmpfs: initialized [ 0.188459] xor: measuring software checksum speed [ 0.228025] prefetch64-sse: 158.000 MB/sec [ 0.268012] generic_sse: 152.000 MB/sec [ 0.269928] xor: using function: prefetch64-sse (158.000 MB/sec) [ 0.272015] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.274611] NET: Registered protocol family 16 [ 0.276772] cpuidle: using governor ladder [ 0.280006] cpuidle: using governor menu [ 0.281372] ACPI: bus type PCI registered [ 0.282413] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.284075] PCI: Using configuration type 1 for base access [ 0.312127] bio: create slab at 0 [ 0.384006] raid6: sse2x1 8118 MB/s [ 0.452009] raid6: sse2x2 8874 MB/s [ 0.520009] raid6: sse2x4 11689 MB/s [ 0.520891] raid6: using algorithm sse2x4 (11689 MB/s) [ 0.521888] raid6: using intx1 recovery algorithm [ 0.522923] ACPI: Added _OSI(Module Device) [ 0.523811] ACPI: Added _OSI(Processor Device) [ 0.524006] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.524940] ACPI: Added _OSI(Processor Aggregator Device) [ 0.528418] ACPI: Interpreter enabled [ 0.529248] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580) [ 0.531166] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580) [ 0.532675] ACPI: (supports S0 S3 S4 S5) [ 0.533526] ACPI: Using IOAPIC for interrupt routing [ 0.534547] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.540162] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.541199] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.544011] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.545257] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.548297] acpiphp: Slot [3] registered [ 0.548910] acpiphp: Slot [4] registered [ 0.548912] acpiphp: Slot [5] registered [ 0.548914] acpiphp: Slot [6] registered [ 0.552054] acpiphp: Slot [7] registered [ 0.552913] acpiphp: Slot [8] registered [ 0.552913] acpiphp: Slot [9] registered [ 0.552913] acpiphp: Slot [10] registered [ 0.556054] acpiphp: Slot [11] registered [ 0.556913] acpiphp: Slot [12] registered [ 0.556913] acpiphp: Slot [13] registered [ 0.556918] acpiphp: Slot [14] registered [ 0.560053] acpiphp: Slot [15] registered [ 0.560912] acpiphp: Slot [16] registered [ 0.560925] acpiphp: Slot [17] registered [ 0.560925] acpiphp: Slot [18] registered [ 0.560925] acpiphp: Slot [19] registered [ 0.564057] acpiphp: Slot [20] registered [ 0.564920] acpiphp: Slot [21] registered [ 0.564923] acpiphp: Slot [22] registered [ 0.564923] acpiphp: Slot [23] registered [ 0.568053] acpiphp: Slot [24] registered [ 0.568920] acpiphp: Slot [25] registered [ 0.568921] acpiphp: Slot [26] registered [ 0.568921] acpiphp: Slot [27] registered [ 0.572060] acpiphp: Slot [28] registered [ 0.572926] acpiphp: Slot [29] registered [ 0.572926] acpiphp: Slot [30] registered [ 0.572926] acpiphp: Slot [31] registered [ 0.576015] PCI host bridge to bus 0000:00 [ 0.576900] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.577929] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.579033] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.580008] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.581198] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff] [ 0.582403] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.584096] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.585545] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.589547] pci 0000:00:01.1: reg 0x20: [io 0xc1c0-0xc1cf] [ 0.591773] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.592314] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.593891] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.596169] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.600751] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 0.603193] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 0.610391] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.612626] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.614126] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff] [ 0.616967] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.624004] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref] [ 0.625221] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.626166] pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc07f] [ 0.628944] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff] [ 0.636039] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 [ 0.638017] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0bf] [ 0.639980] pci 0000:00:05.0: reg 0x14: [mem 0xfebf2000-0xfebf2fff] [ 0.645666] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [ 0.648006] pci 0000:00:06.0: reg 0x10: [io 0xc0c0-0xc0ff] [ 0.649908] pci 0000:00:06.0: reg 0x14: [mem 0xfebf3000-0xfebf3fff] [ 0.656318] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [ 0.658152] pci 0000:00:07.0: reg 0x10: [io 0xc100-0xc13f] [ 0.660480] pci 0000:00:07.0: reg 0x14: [mem 0xfebf4000-0xfebf4fff] [ 0.667629] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [ 0.669046] pci 0000:00:08.0: reg 0x10: [io 0xc140-0xc17f] [ 0.672005] pci 0000:00:08.0: reg 0x14: [mem 0xfebf5000-0xfebf5fff] [ 0.678325] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [ 0.680713] pci 0000:00:09.0: reg 0x10: [io 0xc180-0xc1bf] [ 0.682739] pci 0000:00:09.0: reg 0x14: [mem 0xfebf6000-0xfebf6fff] [ 0.689353] pci 0000:00:0a.0: [8086:25ab] type 00 class 0x088000 [ 0.689687] pci 0000:00:0a.0: reg 0x10: [mem 0xfebf7000-0xfebf700f] [ 0.696292] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.697785] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.699220] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.700568] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.701905] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.703407] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.704165] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.708014] vgaarb: loaded [ 0.708014] vgaarb: bridge control possible 0000:00:02.0 [ 0.712065] SCSI subsystem initialized [ 0.713230] libata version 3.00 loaded. [ 0.716106] ACPI: bus type USB registered [ 0.720103] usbcore: registered new interface driver usbfs [ 0.721297] usbcore: registered new interface driver hub [ 0.721297] usbcore: registered new device driver usb [ 0.724096] pps_core: LinuxPPS API ver. 1 registered [ 0.725206] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.728045] PTP clock support registered [ 0.729088] EDAC MC: Ver: 3.0.0 [ 0.729237] PCI: Using ACPI for IRQ routing [ 0.732017] PCI: pci_cache_line_size set to 64 bytes [ 0.733392] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.734685] e820: reserve RAM buffer [mem 0xdfffe000-0xdfffffff] [ 0.736769] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.738245] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.739562] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.748217] Switched to clocksource kvm-clock [ 0.768136] pnp: PnP ACPI init [ 0.768979] ACPI: bus type PNP registered [ 0.770117] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:15) [ 0.771956] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.773191] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:15) [ 0.774917] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.776056] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:15) [ 0.777816] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.778912] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:15) [ 0.780536] pnp 00:03: [dma 2] [ 0.781374] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.782479] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:15) [ 0.784241] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.785768] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:15) [ 0.789015] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.791360] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.793596] pnp: PnP ACPI: found 7 devices [ 0.795167] ACPI: bus type PNP unregistered [ 0.813451] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.814440] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.815411] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.816478] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfebfffff] [ 0.817630] NET: Registered protocol family 2 [ 0.818725] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.820699] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.822447] TCP: Hash tables configured (established 131072 bind 65536) [ 0.823598] TCP: reno registered [ 0.824341] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.825573] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.826925] NET: Registered protocol family 1 [ 0.828164] RPC: Registered named UNIX socket transport module. [ 0.829153] RPC: Registered udp transport module. [ 0.830041] RPC: Registered tcp transport module. [ 0.830892] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.831930] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.832940] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.833923] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.834947] pci 0000:00:02.0: Boot video device [ 0.835855] PCI: CLS 0 bytes, default 64 [ 0.836766] Trying to unpack rootfs image as initramfs... [ 5.091213] Freeing initrd memory: 212912K (ffff880073014000 - ffff880080000000) [ 5.092825] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 5.093900] software IO TLB [mem 0xdbffe000-0xdfffe000] (64MB) mapped at [ffff8800dbffe000-ffff8800dfffdfff] [ 5.096141] kvm: no hardware support [ 5.097644] Scanning for low memory corruption every 60 seconds [ 5.099617] camellia-x86_64: performance on this CPU would be suboptimal: disabling camellia-x86_64. [ 5.101327] blowfish-x86_64: performance on this CPU would be suboptimal: disabling blowfish-x86_64. [ 5.103194] twofish-x86_64-3way: performance on this CPU would be suboptimal: disabling twofish-x86_64-3way. [ 5.105874] sha1_ssse3: Neither AVX nor SSSE3 is available/usable. [ 5.107819] PCLMULQDQ-NI instructions are not detected. [ 5.109221] AVX or AES-NI instructions are not detected. [ 5.110217] AVX instructions are not detected. [ 5.111127] AVX instructions are not detected. [ 5.112037] AVX instructions are not detected. [ 5.113345] AVX instructions are not detected. [ 5.116478] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 5.141170] bounce pool size: 64 pages [ 5.142057] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 5.150367] VFS: Disk quotas dquot_6.5.2 [ 5.151348] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 5.154820] NFS: Registering the id_resolver key type [ 5.155810] Key type id_resolver registered [ 5.156718] Key type id_legacy registered [ 5.157575] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 5.158740] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 5.160455] ROMFS MTD (C) 2007 Red Hat, Inc. [ 5.161600] fuse init (API version 7.22) [ 5.162931] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 5.166160] msgmni has been set to 32079 [ 5.172390] NET: Registered protocol family 38 [ 5.173323] Key type asymmetric registered [ 5.174401] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 5.176085] io scheduler noop registered [ 5.176939] io scheduler deadline registered [ 5.177831] io scheduler cfq registered (default) [ 5.179171] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 5.180421] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 5.181791] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 5.183383] ACPI: Power Button [PWRF] [ 5.184557] GHES: HEST is not enabled! [ 5.185857] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 5.186917] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:15) [ 5.190093] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 5.191163] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:15) [ 5.194456] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 5.197399] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 5.205655] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 5.228130] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 5.232280] Non-volatile memory driver v1.3 [ 5.237905] brd: module loaded [ 5.241033] loop: module loaded [ 5.242011] virtio-pci 0000:00:04.0: irq 40 for MSI/MSI-X [ 5.243035] virtio-pci 0000:00:04.0: irq 41 for MSI/MSI-X [ 5.244249] blk-mq: CPU -> queue map [ 5.246280] CPU 0 -> Queue 0 [ 5.248847] CPU 1 -> Queue 0 [ 5.249622] CPU 2 -> Queue 0 [ 5.250367] CPU 3 -> Queue 0 [ 5.252032] vda: unknown partition table [ 5.254915] virtio-pci 0000:00:05.0: irq 42 for MSI/MSI-X [ 5.255915] virtio-pci 0000:00:05.0: irq 43 for MSI/MSI-X [ 5.257914] blk-mq: CPU -> queue map [ 5.259213] CPU 0 -> Queue 0 [ 5.260650] CPU 1 -> Queue 0 [ 5.262398] CPU 2 -> Queue 0 [ 5.264210] CPU 3 -> Queue 0 [ 5.267979] vdb: unknown partition table [ 5.271364] virtio-pci 0000:00:06.0: irq 44 for MSI/MSI-X [ 5.272373] virtio-pci 0000:00:06.0: irq 45 for MSI/MSI-X [ 5.273473] blk-mq: CPU -> queue map [ 5.274229] CPU 0 -> Queue 0 [ 5.281314] CPU 1 -> Queue 0 [ 5.281999] CPU 2 -> Queue 0 [ 5.282682] CPU 3 -> Queue 0 [ 5.284795] vdc: unknown partition table [ 5.287823] virtio-pci 0000:00:07.0: irq 46 for MSI/MSI-X [ 5.288897] virtio-pci 0000:00:07.0: irq 47 for MSI/MSI-X [ 5.290409] blk-mq: CPU -> queue map [ 5.291420] CPU 0 -> Queue 0 [ 5.292382] CPU 1 -> Queue 0 [ 5.293318] CPU 2 -> Queue 0 [ 5.294374] CPU 3 -> Queue 0 [ 5.298192] vdd: unknown partition table [ 5.302221] virtio-pci 0000:00:08.0: irq 48 for MSI/MSI-X [ 5.304175] virtio-pci 0000:00:08.0: irq 49 for MSI/MSI-X [ 5.306299] blk-mq: CPU -> queue map [ 5.307798] CPU 0 -> Queue 0 [ 5.309241] CPU 1 -> Queue 0 [ 5.310628] CPU 2 -> Queue 0 [ 5.311973] CPU 3 -> Queue 0 [ 5.314967] vde: unknown partition table [ 5.318968] virtio-pci 0000:00:09.0: irq 50 for MSI/MSI-X [ 5.320311] virtio-pci 0000:00:09.0: irq 51 for MSI/MSI-X [ 5.322636] blk-mq: CPU -> queue map [ 5.324122] CPU 0 -> Queue 0 [ 5.325561] CPU 1 -> Queue 0 [ 5.326846] CPU 2 -> Queue 0 [ 5.328309] CPU 3 -> Queue 0 [ 5.330773] vdf: unknown partition table [ 5.335828] lkdtm: No crash points registered, enable through debugfs [ 5.340624] Loading iSCSI transport class v2.0-870. [ 5.343350] Adaptec aacraid driver 1.2-0[30300]-ms [ 5.344406] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 5.345828] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.02-k. [ 5.347653] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 5.349372] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 5.350654] megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013 [ 5.351968] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 5.353141] RocketRAID 3xxx/4xxx Controller driver v1.8 [ 5.354751] ata_piix 0000:00:01.1: version 2.13 [ 5.358512] scsi0 : ata_piix [ 5.359612] scsi1 : ata_piix [ 5.360564] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc1c0 irq 14 [ 5.361742] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc1c8 irq 15 [ 5.364353] tun: Universal TUN/TAP device driver, 1.6 [ 5.365301] tun: (C) 1999-2004 Max Krasnyansky [ 5.366909] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 5.368265] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 5.369264] Copyright (c) 2007 Atheros Corporation. [ 5.370727] dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) [ 5.371974] v1.01-e (2.4 port) Sep-11-2006 Donald Becker [ 5.371974] http://www.scyld.com/network/drivers.html [ 5.374380] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) [ 5.375727] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 5.376810] e100: Copyright(c) 1999-2006 Intel Corporation [ 5.377910] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 5.379089] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 5.516848] ata2.01: NODEV after polling detection [ 5.518081] ata2.00: ATAPI: QEMU DVD-ROM, 1.6.0, max UDMA/100 [ 5.519539] ata2.00: configured for MWDMA2 [ 5.521226] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 1.6. PQ: 0 ANSI: 5 [ 5.523877] scsi 1:0:0:0: Attached scsi generic sg0 type 5 [ 5.709222] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 [ 5.710309] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.711735] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 5.712700] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 5.714083] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 5.715156] igb: Copyright (c) 2007-2013 Intel Corporation. [ 5.716574] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.19.1-k [ 5.718012] ixgbe: Copyright (c) 1999-2013 Intel Corporation. [ 5.719637] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 5.721308] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 5.723200] sky2: driver version 1.30 [ 5.726371] usbcore: registered new interface driver catc [ 5.727992] usbcore: registered new interface driver kaweth [ 5.729573] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 5.732302] usbcore: registered new interface driver pegasus [ 5.734211] usbcore: registered new interface driver rtl8150 [ 5.736039] usbcore: registered new interface driver asix [ 5.737856] usbcore: registered new interface driver ax88179_178a [ 5.739570] usbcore: registered new interface driver cdc_ether [ 5.741155] usbcore: registered new interface driver cdc_eem [ 5.742449] usbcore: registered new interface driver dm9601 [ 5.743932] usbcore: registered new interface driver smsc75xx [ 5.745489] usbcore: registered new interface driver smsc95xx [ 5.746930] usbcore: registered new interface driver gl620a [ 5.748404] usbcore: registered new interface driver net1080 [ 5.750058] usbcore: registered new interface driver plusb [ 5.751388] usbcore: registered new interface driver rndis_host [ 5.753059] usbcore: registered new interface driver cdc_subset [ 5.754759] usbcore: registered new interface driver zaurus [ 5.756458] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 5.758861] usbcore: registered new interface driver int51x1 [ 5.760220] usbcore: registered new interface driver ipheth [ 5.761777] usbcore: registered new interface driver sierra_net [ 5.763477] usbcore: registered new interface driver cdc_ncm [ 5.764840] Fusion MPT base driver 3.04.20 [ 5.765915] Copyright (c) 1999-2008 LSI Corporation [ 5.767141] Fusion MPT SPI Host driver 3.04.20 [ 5.768627] Fusion MPT FC Host driver 3.04.20 [ 5.769899] Fusion MPT SAS Host driver 3.04.20 [ 5.771388] Fusion MPT misc device (ioctl) driver 3.04.20 [ 5.773065] mptctl: Registered with Fusion MPT base driver [ 5.775896] mptctl: /dev/mptctl @ (major,minor=10,220) [ 5.778295] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.780297] ehci-pci: EHCI PCI platform driver [ 5.782348] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.784642] ohci-pci: OHCI PCI platform driver [ 5.786768] uhci_hcd: USB Universal Host Controller Interface driver [ 5.789155] usbcore: registered new interface driver usb-storage [ 5.790292] usbcore: registered new interface driver ums-alauda [ 5.791451] usbcore: registered new interface driver ums-datafab [ 5.792636] usbcore: registered new interface driver ums-freecom [ 5.793770] usbcore: registered new interface driver ums-isd200 [ 5.794894] usbcore: registered new interface driver ums-jumpshot [ 5.796065] usbcore: registered new interface driver ums-sddr09 [ 5.797194] usbcore: registered new interface driver ums-sddr55 [ 5.798315] usbcore: registered new interface driver ums-usbat [ 5.799448] usbcore: registered new interface driver usbtest [ 5.800764] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 5.803421] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.805907] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.809805] mousedev: PS/2 mouse device common for all mice [ 5.812855] rtc_cmos 00:00: RTC can wake from S4 [ 5.813776] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 5.816073] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 5.817311] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs [ 5.818838] i6300esb: Intel 6300ESB WatchDog Timer Driver v0.05 [ 5.821014] i6300esb: initialized (0xffffc90001ad4000). heartbeat=30 sec (nowayout=0) [ 5.823437] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 5.825318] iTCO_vendor_support: vendor-support=0 [ 5.826633] watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16). [ 5.828817] watchdog: Software Watchdog: a legacy watchdog module is probably present. [ 5.830635] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) [ 5.832494] md: linear personality registered for level -1 [ 5.833479] md: raid0 personality registered for level 0 [ 5.834447] md: raid1 personality registered for level 1 [ 5.835413] md: raid10 personality registered for level 10 [ 5.836674] md: raid6 personality registered for level 6 [ 5.837653] md: raid5 personality registered for level 5 [ 5.838570] md: raid4 personality registered for level 4 [ 5.839508] md: multipath personality registered for level -4 [ 5.840511] md: faulty personality registered for level -5 [ 5.842651] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 5.844661] device-mapper: multipath: version 1.6.0 loaded [ 5.845668] device-mapper: multipath round-robin: version 1.0.0 loaded [ 5.846806] device-mapper: cache-policy-mq: version 1.2.0 loaded [ 5.847850] device-mapper: cache cleaner: version 1.0.0 loaded [ 5.849531] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 5.858756] usbcore: registered new interface driver usbhid [ 5.859975] usbhid: USB HID core driver [ 5.861398] TCP: bic registered [ 5.862303] Initializing XFRM netlink socket [ 5.864223] NET: Registered protocol family 10 [ 5.865595] sit: IPv6 over IPv4 tunneling driver [ 5.867445] NET: Registered protocol family 17 [ 5.868558] 8021q: 802.1Q VLAN Support v1.8 [ 5.873884] DCCP: Activated CCID 2 (TCP-like) [ 5.874938] DCCP: Activated CCID 3 (TCP-Friendly Rate Control) [ 5.878956] sctp: Hash tables configured (established 65536 bind 65536) [ 5.880629] tipc: Activated (version 2.0.0) [ 5.881747] NET: Registered protocol family 30 [ 5.883095] tipc: Started in single node mode [ 5.884151] Key type dns_resolver registered [ 5.887259] [ 5.887259] printing PIC contents [ 5.888786] ... PIC IMR: ffff [ 5.892773] ... PIC IRR: 9113 [ 5.896923] ... PIC ISR: 0000 [ 5.897787] ... PIC ELCR: 0c00 [ 5.898697] printing local APIC contents on CPU#0/0: [ 5.899879] ... APIC ID: 00000000 (0) [ 5.900922] ... APIC VERSION: 00050014 [ 5.901914] ... APIC TASKPRI: 00000000 (00) [ 5.902688] ... APIC PROCPRI: 00000000 [ 5.902688] ... APIC LDR: 01000000 [ 5.902688] ... APIC DFR: ffffffff [ 5.902688] ... APIC SPIV: 000001ff [ 5.902688] ... APIC ISR field: [ 5.902688] 0000000000000000000000000000000000000000000000000000000000000000 [ 5.902688] ... APIC TMR field: [ 5.902688] 0000000002000000000000000000000000000000000000000000000000000000 [ 5.902688] ... APIC IRR field: [ 5.902688] 0000000000000000000000000000000000000000000000000000000000000000 [ 5.902688] ... APIC ESR: 00000000 [ 5.902688] ... APIC ICR: 000008fd [ 5.902688] ... APIC ICR2: 08000000 [ 5.902688] ... APIC LVTT: 000000ef [ 5.902688] ... APIC LVTPC: 00010000 [ 5.902688] ... APIC LVT0: 00010700 [ 5.902688] ... APIC LVT1: 00000400 [ 5.902688] ... APIC LVTERR: 000000fe [ 5.902688] ... APIC TMICT: 4e3ac4e4 [ 5.902688] ... APIC TMCCT: 4dee7a8a [ 5.902688] ... APIC TDCR: 00000003 [ 5.902688] [ 5.927275] number of MP IRQ sources: 15. [ 5.928274] number of IO-APIC #0 registers: 24. [ 5.929331] testing the IO APIC....................... [ 5.930473] IO APIC #0...... [ 5.931309] .... register #00: 00000000 [ 5.932277] ....... : physical APIC id: 00 [ 5.933306] ....... : Delivery Type: 0 [ 5.934284] ....... : LTS : 0 [ 5.935265] .... register #01: 00170011 [ 5.936244] ....... : max redirection entries: 17 [ 5.937351] ....... : PRQ implemented: 0 [ 5.938364] ....... : IO APIC version: 11 [ 5.939392] .... register #02: 00000000 [ 5.940361] ....... : arbitration: 00 [ 5.941344] .... IRQ redirection table: [ 5.942314] 1 0 0 0 0 0 0 00 [ 5.943368] 0 0 0 0 0 1 1 31 [ 5.944440] 0 0 0 0 0 1 1 30 [ 5.945496] 0 0 0 0 0 1 1 33 [ 5.946561] 1 0 0 0 0 1 1 34 [ 5.947620] 1 1 0 0 0 1 1 35 [ 5.948694] 0 0 0 0 0 1 1 36 [ 5.949745] 0 0 0 0 0 1 1 37 [ 5.950808] 0 0 0 0 0 1 1 38 [ 5.951865] 0 1 0 0 0 1 1 39 [ 5.952934] 1 1 0 0 0 1 1 3A [ 5.953992] 1 1 0 0 0 1 1 3B [ 5.955050] 0 0 0 0 0 1 1 3C [ 5.956116] 0 0 0 0 0 1 1 3D [ 5.957175] 0 0 0 0 0 1 1 3E [ 5.958234] 0 0 0 0 0 1 1 3F [ 5.959293] 1 0 0 0 0 0 0 00 [ 5.960358] 1 0 0 0 0 0 0 00 [ 5.961412] 1 0 0 0 0 0 0 00 [ 5.962457] 1 0 0 0 0 0 0 00 [ 5.963510] 1 0 0 0 0 0 0 00 [ 5.964576] 1 0 0 0 0 0 0 00 [ 5.965633] 1 0 0 0 0 0 0 00 [ 5.966684] 1 0 0 0 0 0 0 00 [ 5.967724] IRQ to pin mappings: [ 5.968626] IRQ0 -> 0:2 [ 5.969565] IRQ1 -> 0:1 [ 5.970494] IRQ3 -> 0:3 [ 5.971427] IRQ4 -> 0:4 [ 5.972375] IRQ5 -> 0:5 [ 5.974079] IRQ6 -> 0:6 [ 5.976034] IRQ7 -> 0:7 [ 5.977951] IRQ8 -> 0:8 [ 5.979145] IRQ9 -> 0:9 [ 5.980105] IRQ10 -> 0:10 [ 5.981072] IRQ11 -> 0:11 [ 5.982039] IRQ12 -> 0:12 [ 5.983004] IRQ13 -> 0:13 [ 5.983983] IRQ14 -> 0:14 [ 5.984961] IRQ15 -> 0:15 [ 5.985928] .................................... done. [ 5.988509] registered taskstats version 1 [ 5.993318] bio: create slab at 1 [ 5.997809] Btrfs loaded [ 6.000142] rtc_cmos 00:00: setting system clock to 2014-03-14 02:45:27 UTC (1394765127) [ 6.002361] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found [ 6.010614] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.011922] 8021q: adding VLAN 0 to HW filter on device eth0 [ 6.096083] tsc: Refined TSC clocksource calibration: 2693.507 MHz [ 6.446071] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 [ 8.012551] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 8.014867] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 8.028042] Sending DHCP requests ., OK [ 8.068053] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15 [ 8.069778] IP-Config: Complete: [ 8.070709] device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2 [ 8.072924] host=kbuildx-1, domain=, nis-domain=(none) [ 8.074160] bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath= [ 8.075063] nameserver0=10.0.2.3 [ 8.076672] PM: Hibernation image not present or could not be loaded. [ 8.079666] Freeing unused kernel memory: 1440K (ffffffff8233b000 - ffffffff824a3000) [ 8.081648] Write protecting the kernel read-only data: 18432k [ 8.087687] Freeing unused kernel memory: 1688K (ffff880001a5a000 - ffff880001c00000) [ 8.094505] Freeing unused kernel memory: 1872K (ffff88000202c000 - ffff880002200000) [ 8.376591] microcode: CPU0 sig=0xf61, pf=0x1, revision=0x1 [ 8.379715] microcode: CPU1 sig=0xf61, pf=0x1, revision=0x1 [ 8.381985] microcode: CPU2 sig=0xf61, pf=0x1, revision=0x1 [ 8.383190] microcode: CPU3 sig=0xf61, pf=0x1, revision=0x1 [ 8.384898] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 8.825188] random: vgscan urandom read with 21 bits of entropy available ==> /lkp/lkp/src/tmp/run_log <== Kernel tests: Boot OK! PATH=/sbin:/usr/sbin:/bin:/usr/bin ==> /lkp/lkp/src/tmp/err_log <== ==> /lkp/lkp/src/tmp/run_log <== downloading latest lkp src code Kernel tests: Boot OK 2! /lkp/lkp/src/bin/run-lkp LKP_SRC_DIR=/lkp/lkp/src RESULT_ROOT=/lkp/result/kbuildx/sysbench/fileio/600s-100%-1HDD-xfs-64G-1024-rndrd-sync/x86_64-lkp/165e0ff526fe806c4e14d02b9eccdfeb35449175/0 job=/lkp/scheduled/kbuildx-1/cyclic_fileio-600s-100%-1HDD-xfs-64G-1024-rndrd-sync-HEAD-165e0ff526fe806c4e14d02b9eccdfeb35449175.yaml run-job /lkp/scheduled/kbuildx-1/cyclic_fileio-600s-100%-1HDD-xfs-64G-1024-rndrd-sync-HEAD-165e0ff526fe806c4e14d02b9eccdfeb35449175.yaml 2014-03-14 02:45:54 mkfs -t xfs /dev/vdb meta-data=/dev/vdb isize=256 agcount=4, agsize=16777216 blks = sectsz=512 attr=2, projid32bit=0 data = bsize=4096 blocks=67108864, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0 log =internal log bsize=4096 blocks=32768, version=2 = sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 2014-03-14 02:45:56 mount -t xfs -o nobarrier,inode64 /dev/vdb /fs/vdb [ 31.044324] XFS (vdb): Mounting Filesystem [ 31.050656] XFS (vdb): Ending clean mount run: pre-test [ 40.100242] random: nonblocking pool is initialized [ 1110.416706] Unregister pv shared memory for cpu 3 [ 1110.416709] Unregister pv shared memory for cpu 2 [ 1110.416711] Unregister pv shared memory for cpu 0 [ 1110.419358] Unregister pv shared memory for cpu 1 [ 1110.424626] reboot: Restarting system [ 1110.425355] reboot: machine restart Elapsed time: 845 numactl --preferred=0 --physcpubind=4-7 qemu-system-x86_64 -cpu kvm64 -enable-kvm -kernel /kernel/x86_64-lkp/165e0ff526fe806c4e14d02b9eccdfeb35449175/vmlinuz-3.14.0-rc6-wl-ath-03638-g165e0ff -append 'user=lkp job=/lkp/scheduled/kbuildx-1/cyclic_fileio-600s-100%-1HDD-xfs-64G-1024-rndrd-sync-HEAD-165e0ff526fe806c4e14d02b9eccdfeb35449175.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-lkp/165e0ff526fe806c4e14d02b9eccdfeb35449175/vmlinuz-3.14.0-rc6-wl-ath-03638-g165e0ff kconfig=x86_64-lkp commit=165e0ff526fe806c4e14d02b9eccdfeb35449175 modules_initrd=/kernel/x86_64-lkp/165e0ff526fe806c4e14d02b9eccdfeb35449175/modules.cgz max_uptime=3743 RESULT_ROOT=/lkp/result/kbuildx/sysbench/fileio/600s-100%-1HDD-xfs-64G-1024-rndrd-sync/x86_64-lkp/165e0ff526fe806c4e14d02b9eccdfeb35449175/0 initrd=/kernel-tests/initrd/lkp-rootfs.cgz root=/dev/ram0 ip=::::kbuildx-1::dhcp oops=panic earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal' -initrd /fs/sda1/initrd-kbuildx-1 -m 16384 -smp 4 -net nic,vlan=1,model=e1000 -net user,vlan=1,hostfwd=tcp::9648-:22 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -drive file=/fs/sda1/disk0-kbuildx-1,media=disk,if=virtio -drive file=/fs/sda1/disk1-kbuildx-1,media=disk,if=virtio -drive file=/fs/sda1/disk2-kbuildx-1,media=disk,if=virtio -drive file=/fs/sda1/disk3-kbuildx-1,media=disk,if=virtio -drive file=/fs/sda1/disk4-kbuildx-1,media=disk,if=virtio -drive file=/fs/sda1/disk5-kbuildx-1,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-kbuildx-1 -serial file:/dev/shm/kboot/serial-kbuildx-1 -daemonize -display none -monitor null