| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 25 Mar 2014 08:19:19 +0000
From: Lee Jones <lee.jones@...aro.org>
To: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: lee.jones@...aro.org, kernel@...inux.com,
computersforpeace@...il.com, linux-mtd@...ts.infradead.org,
dwmw2@...radead.org, angus.clark@...com, pekon@...com
Subject: [RFC 02/47] mtd: nand: add ONFI NAND Timing Mode Specifications
This patch adds a new structure, 'nand_timing_spec', to capture the A/C
timing characteristics of NAND devices.
Unfortunately, there is no universally accepted standard for defining
NAND timing parameters. Different datasheets list different sets of
parameters. The ONFI standard gets close, but support is missing from
some of the major NAND manufacturers (e.g. Samsung, Toshiba). Here we
have followed broadly the ONFI timing definitions.
We also provide specifications for the six standard ONFI timing modes,
in terms of the new nand_timing_spec structure. This will allow fully
automated configuration of the timing registers when using
ONFI-compliant NAND.
Signed-off-by: Lee Jones <lee.jones@...aro.org>
---
drivers/mtd/nand/nand_ids.c | 165 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/mtd/nand.h | 34 +++++++++
2 files changed, 199 insertions(+)
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index a87b0a3..12f769d 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -175,6 +175,171 @@ struct nand_manufacturers nand_manuf_ids[] = {
EXPORT_SYMBOL(nand_manuf_ids);
EXPORT_SYMBOL(nand_flash_ids);
+/*
+ * ONFI NAND Timing Mode Specifications
+ *
+ * Note, 'tR' field (maximum page read time) is extracted from the ONFI
+ * parameter page during device probe.
+ */
+struct nand_timing_spec nand_onfi_timing_specs[] = {
+ /*
+ * ONFI Timing Mode '0' (supported on all ONFI compliant devices)
+ */
+ [0] = {
+ .tCLS = 50,
+ .tCS = 70,
+ .tALS = 50,
+ .tDS = 40,
+ .tWP = 50,
+ .tCLH = 20,
+ .tCH = 20,
+ .tALH = 20,
+ .tDH = 20,
+ .tWB = 200,
+ .tWH = 30,
+ .tWC = 100,
+ .tRP = 50,
+ .tREH = 30,
+ .tRC = 100,
+ .tREA = 40,
+ .tRHOH = 0,
+ .tCEA = 100,
+ .tCOH = 0,
+ .tCHZ = 100,
+ },
+
+ /*
+ * ONFI Timing Mode '1'
+ */
+ [1] = {
+ .tCLS = 25,
+ .tCS = 35,
+ .tALS = 25,
+ .tDS = 20,
+ .tWP = 25,
+ .tCLH = 10,
+ .tCH = 10,
+ .tALH = 10,
+ .tDH = 10,
+ .tWB = 100,
+ .tWH = 15,
+ .tWC = 45,
+ .tRP = 25,
+ .tREH = 15,
+ .tRC = 50,
+ .tREA = 30,
+ .tRHOH = 15,
+ .tCEA = 45,
+ .tCOH = 15,
+ .tCHZ = 50,
+ },
+
+ /*
+ * ONFI Timing Mode '2'
+ */
+ [2] = {
+ .tCLS = 15,
+ .tCS = 25,
+ .tALS = 15,
+ .tDS = 15,
+ .tWP = 17,
+ .tCLH = 10,
+ .tCH = 10,
+ .tALH = 10,
+ .tDH = 5,
+ .tWB = 100,
+ .tWH = 15,
+ .tWC = 35,
+ .tRP = 17,
+ .tREH = 16,
+ .tRC = 35,
+ .tREA = 25,
+ .tRHOH = 15,
+ .tCEA = 30,
+ .tCOH = 15,
+ .tCHZ = 50,
+ },
+
+ /*
+ * ONFI Timing Mode '3'
+ */
+ [3] = {
+ .tCLS = 10,
+ .tCS = 25,
+ .tALS = 10,
+ .tDS = 10,
+ .tWP = 15,
+ .tCLH = 5,
+ .tCH = 5,
+ .tALH = 5,
+ .tDH = 5,
+ .tWB = 100,
+ .tWH = 10,
+ .tWC = 30,
+ .tRP = 15,
+ .tREH = 10,
+ .tRC = 30,
+ .tREA = 20,
+ .tRHOH = 15,
+ .tCEA = 25,
+ .tCOH = 15,
+ .tCHZ = 50,
+ },
+
+ /*
+ * ONFI Timing Mode '4' (EDO only)
+ */
+ [4] = {
+ .tCLS = 10,
+ .tCS = 20,
+ .tALS = 10,
+ .tDS = 10,
+ .tWP = 12,
+ .tCLH = 5,
+ .tCH = 5,
+ .tALH = 5,
+ .tDH = 5,
+ .tWB = 100,
+ .tWH = 10,
+ .tWC = 25,
+ .tRP = 12,
+ .tREH = 10,
+ .tRC = 25,
+ .tREA = 20,
+ .tRHOH = 15,
+ .tCEA = 25,
+ .tCOH = 15,
+ .tCHZ = 30,
+ },
+
+ /*
+ * ONFI Timing Mode '5' (EDO only)
+ */
+ [5] = {
+ .tCLS = 10,
+ .tCS = 15,
+ .tALS = 10,
+ .tDS = 7,
+ .tWP = 10,
+ .tCLH = 5,
+ .tCH = 5,
+ .tALH = 5,
+ .tDH = 5,
+ .tWB = 100,
+ .tWH = 7,
+ .tWC = 20,
+ .tRP = 10,
+ .tREH = 7,
+ .tRC = 20,
+ .tREA = 16,
+ .tRHOH = 15,
+ .tCEA = 25,
+ .tCOH = 15,
+ .tCHZ = 30,
+ }
+};
+EXPORT_SYMBOL(nand_onfi_timing_specs);
+
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Thomas Gleixner <tglx@...utronix.de>");
MODULE_DESCRIPTION("Nand device & manufacturer IDs");
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index f7b6a53..0d456b4 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -326,6 +326,40 @@ struct onfi_ext_param_page {
*/
} __packed;
+/*
+ * NAND Device Timing Specification
+ *
+ * All values in nano seconds, except where specified.
+ */
+struct nand_timing_spec {
+ int tR; /* Max Page Read delay [us]*/
+ int tCLS; /* Min CLE setup time */
+ int tCS; /* Min CE setup time */
+ int tALS; /* Min ALE setup time */
+ int tDS; /* Min Data setup time */
+ int tWP; /* Min WE pulse width */
+ int tCLH; /* Min CLE hold time */
+ int tCH; /* Min CE hold time */
+ int tALH; /* Min ALE hold time */
+ int tDH; /* Min Data hold time */
+ int tWB; /* Max WE high to busy */
+ int tWH; /* Min WE hold time */
+ int tWC; /* Min Write cycle time */
+ int tRP; /* Min RE pulse width */
+ int tREH; /* Min RE high hold time */
+ int tRC; /* Min Read cycle time */
+ int tREA; /* Max Read access time */
+ int tRHOH; /* Min RE high to output hold */
+ int tCEA; /* Max CE access time */
+ int tCOH; /* Min CE high to output hold */
+ int tCHZ; /* Max CE high to output high Z */
+ int tCSD; /* Min CE high to ALE/CLE don't care */
+};
+
+/* ONFI define 6 timing modes */
+#define NAND_ONFI_TIMING_MODES 6
+extern struct nand_timing_spec nand_onfi_timing_specs[];
+
/**
* struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices
* @lock: protection lock
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists