| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 29 Apr 2014 11:17:57 +0200
From: Peter Feuerer <peter@...e.net>
To: LKML <linux-kernel@...r.kernel.org>
Cc: Peter Feuerer <peter@...e.net>, Zhang Rui <rui.zhang@...el.com>,
Andreas Mohr <andi@...as.de>, Borislav Petkov <bp@...e.de>
Subject: [PATCH v2 4/4] acerhdf: Use bang-bang thermal governor
acerhdf has been doing an on-off fan control using hysteresis by
post-manipulating the outcome of thermal subsystem trip point handling.
This patch enables acerhdf to use the bang-bang governor, which is
intended for on-off controlled fans.
CC: Zhang Rui <rui.zhang@...el.com>
Cc: Andreas Mohr <andi@...as.de>
Cc: Borislav Petkov <bp@...e.de>
Signed-off-by: Peter Feuerer <peter@...e.net>
---
drivers/platform/x86/Kconfig | 2 +-
drivers/platform/x86/acerhdf.c | 48 +++++++++++++++++++++++++++++++++++-------
2 files changed, 41 insertions(+), 9 deletions(-)
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 27df2c5..0c15d89 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -38,7 +38,7 @@ config ACER_WMI
config ACERHDF
tristate "Acer Aspire One temperature and fan driver"
- depends on THERMAL && ACPI
+ depends on ACPI && THERMAL_GOV_BANG_BANG
---help---
This is a driver for Acer Aspire One netbooks. It allows to access
the temperature sensor and to control the fan.
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 176edbd..f3884f9 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -50,7 +50,7 @@
*/
#undef START_IN_KERNEL_MODE
-#define DRV_VER "0.5.30"
+#define DRV_VER "0.5.31"
/*
* According to the Atom N270 datasheet,
@@ -135,8 +135,8 @@ struct bios_settings_t {
const char *vendor;
const char *product;
const char *version;
- unsigned char fanreg;
- unsigned char tempreg;
+ u8 fanreg;
+ u8 tempreg;
struct fancmd cmd;
int mcmd_enable;
};
@@ -259,6 +259,17 @@ static const struct bios_settings_t bios_tbl[] = {
static const struct bios_settings_t *bios_cfg __read_mostly;
+/*
+ * this struct is used to instruct thermal layer to use bang_bang instead of
+ * default governor for acerhdf
+ */
+static struct thermal_zone_params acerhdf_zone_params = {
+ .governor_name = "bang_bang",
+ .no_hwmon = 0,
+ .num_tbps = 0,
+ .tbp = 0,
+};
+
static int acerhdf_get_temp(int *temp)
{
u8 read_temp;
@@ -436,6 +447,17 @@ static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, int trip,
{
if (trip == 0)
*type = THERMAL_TRIP_ACTIVE;
+ if (trip == 1)
+ *type = THERMAL_TRIP_CRITICAL;
+
+ return 0;
+}
+
+static int acerhdf_get_trip_hyst(struct thermal_zone_device *thermal, int trip,
+ unsigned long *temp)
+{
+ if (trip == 0)
+ *temp = fanon - fanoff;
return 0;
}
@@ -445,6 +467,8 @@ static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip,
{
if (trip == 0)
*temp = fanon;
+ else if (trip == 1)
+ *temp = ACERHDF_TEMP_CRIT;
return 0;
}
@@ -464,8 +488,10 @@ static struct thermal_zone_device_ops acerhdf_dev_ops = {
.get_mode = acerhdf_get_mode,
.set_mode = acerhdf_set_mode,
.get_trip_type = acerhdf_get_trip_type,
+ .get_trip_hyst = acerhdf_get_trip_hyst,
.get_trip_temp = acerhdf_get_trip_temp,
.get_crit_temp = acerhdf_get_crit_temp,
+ .notify = NULL,
};
@@ -516,9 +542,7 @@ static int acerhdf_set_cur_state(struct thermal_cooling_device *cdev,
}
if (state == 0) {
- /* turn fan off only if below fanoff temperature */
- if ((cur_state == ACERHDF_FAN_AUTO) &&
- (cur_temp < fanoff))
+ if (cur_state == ACERHDF_FAN_AUTO)
acerhdf_change_fanstate(ACERHDF_FAN_OFF);
} else {
if (cur_state == ACERHDF_FAN_OFF)
@@ -696,12 +720,20 @@ static int acerhdf_register_thermal(void)
if (IS_ERR(cl_dev))
return -EINVAL;
- thz_dev = thermal_zone_device_register("acerhdf", 1, 0, NULL,
- &acerhdf_dev_ops, NULL, 0,
+ thz_dev = thermal_zone_device_register("acerhdf", 2, 0, NULL,
+ &acerhdf_dev_ops,
+ &acerhdf_zone_params, 0,
(kernelmode) ? interval*1000 : 0);
if (IS_ERR(thz_dev))
return -EINVAL;
+ if (strcmp(thz_dev->governor->name,
+ acerhdf_zone_params.governor_name)) {
+ pr_err("Didn't get thermal governor %s, perhaps not compiled into thermal subsystem.\n",
+ acerhdf_zone_params.governor_name);
+ return -EINVAL;
+ }
+
return 0;
}
--
1.9.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists