| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 09 May 2014 13:15:55 +0200
From: Tomas Henzl <thenzl@...hat.com>
To: ching <ching2048@...ca.com.tw>
CC: jbottomley@...allels.com, dan.carpenter@...cle.com,
agordeev@...hat.com, linux-scsi@...r.kernel.org,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v1.1 2/16 update 3] arcmsr: Adding code to support MSI-X
interrupt
On 05/08/2014 01:37 PM, ching wrote:
> Hi Tomas,
>
> Thanks for your suggestion.
> I will add a new patch 17/17 at last.
This additional patch was meant for moving the scsi_scan_host, because it's
nor related to the ms-x interrupts. Probably the maintainer will prefer
a single patch which changes msi-x at once, I don't care.
To the patch below - you should also free the allocated irqs as I wrote previously.
Cheers,
Tomas
> ---
>
> diff -uprN a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
> --- a/drivers/scsi/arcmsr/arcmsr_hba.c 2014-05-08 17:45:34.000000000 +0800
> +++ b/drivers/scsi/arcmsr/arcmsr_hba.c 2014-05-08 17:45:52.000000000 +0800
> @@ -778,12 +778,11 @@ static int arcmsr_probe(struct pci_dev *
> }
> error = scsi_add_host(host, &pdev->dev);
> if(error){
> - goto RAID_controller_stop;
> + goto free_ccb_pool;
> }
> if (arcmsr_request_irq(pdev, acb) == ARC_FAILURE)
> goto scsi_host_remove;
> arcmsr_iop_init(acb);
> - scsi_scan_host(host);
> INIT_WORK(&acb->arcmsr_do_message_isr_bh, arcmsr_message_isr_bh_fn);
> atomic_set(&acb->rq_map_token, 16);
> atomic_set(&acb->ante_token_value, 16);
> @@ -795,13 +794,14 @@ static int arcmsr_probe(struct pci_dev *
> add_timer(&acb->eternal_timer);
> if(arcmsr_alloc_sysfs_attr(acb))
> goto out_free_sysfs;
> + scsi_scan_host(host);
> return 0;
> out_free_sysfs:
> -scsi_host_remove:
> - scsi_remove_host(host);
> -RAID_controller_stop:
> arcmsr_stop_adapter_bgrb(acb);
> arcmsr_flush_adapter_cache(acb);
> +scsi_host_remove:
> + scsi_remove_host(host);
> +free_ccb_pool:
> arcmsr_free_ccb_pool(acb);
> free_hbb_mu:
> arcmsr_free_mu(acb);
>
>
>
> On Wed, 2014-05-07 at 16:31 +0200, Tomas Henzl wrote:
>> On 05/07/2014 01:52 PM, ching wrote:
>>> From: Ching<ching2048@...ca.com.tw>
>>>
>>> Adding code to support MSI-X interrupt.
>>>
>>> This update has made change by Tomas' and Alexander's suggestion.
>>>
>>> Signed-off-by: Ching<ching2048@...ca.com.tw>
>>> ---
>>>
>>> diff -uprN a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h
>>> --- a/drivers/scsi/arcmsr/arcmsr.h 2014-04-28 16:02:46.000000000 +0800
>>> +++ b/drivers/scsi/arcmsr/arcmsr.h 2014-05-06 15:24:36.000000000 +0800
>>> @@ -64,6 +64,7 @@ struct device_attribute;
>>> #define ARCMSR_MAX_HBB_POSTQUEUE 264
>>> #define ARCMSR_MAX_XFER_LEN 0x26000 /* 152K */
>>> #define ARCMSR_CDB_SG_PAGE_LENGTH 256
>>> +#define ARCMST_NUM_MSIX_VECTORS 4
>>> #ifndef PCI_DEVICE_ID_ARECA_1880
>>> #define PCI_DEVICE_ID_ARECA_1880 0x1880
>>> #endif
>>> @@ -508,6 +509,7 @@ struct AdapterControlBlock
>>> struct pci_dev * pdev;
>>> struct Scsi_Host * host;
>>> unsigned long vir2phy_offset;
>>> + struct msix_entry entries[ARCMST_NUM_MSIX_VECTORS];
>>> /* Offset is used in making arc cdb physical to virtual calculations */
>>> uint32_t outbound_int_enable;
>>> uint32_t cdb_phyaddr_hi32;
>>> @@ -544,6 +546,8 @@ struct AdapterControlBlock
>>> /* iop init */
>>> #define ACB_F_ABORT 0x0200
>>> #define ACB_F_FIRMWARE_TRAP 0x0400
>>> + #define ACB_F_MSI_ENABLED 0x1000
>>> + #define ACB_F_MSIX_ENABLED 0x2000
>>> struct CommandControlBlock * pccb_pool[ARCMSR_MAX_FREECCB_NUM];
>>> /* used for memory free */
>>> struct list_head ccb_free_list;
>>> @@ -594,6 +598,7 @@ struct AdapterControlBlock
>>> #define FW_DEADLOCK 0x0010
>>> atomic_t rq_map_token;
>>> atomic_t ante_token_value;
>>> + int msix_vector_count;
>>> };/* HW_DEVICE_EXTENSION */
>>> /*
>>> *******************************************************************************
>>> diff -uprN a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
>>> --- a/drivers/scsi/arcmsr/arcmsr_hba.c 2014-04-28 15:58:34.000000000 +0800
>>> +++ b/drivers/scsi/arcmsr/arcmsr_hba.c 2014-05-07 18:42:40.000000000 +0800
>>> @@ -603,6 +603,60 @@ static void arcmsr_message_isr_bh_fn(str
>>> }
>>> }
>>>
>>> +static int
>>> +arcmsr_request_irq(struct pci_dev *pdev, struct AdapterControlBlock *acb)
>>> +{
>>> + int i, j, r;
>>> + struct msix_entry entries[ARCMST_NUM_MSIX_VECTORS];
>>> +
>>> + if (!pci_find_capability(pdev, PCI_CAP_ID_MSIX))
>>> + goto msi_int;
>>> + for (i = 0; i < ARCMST_NUM_MSIX_VECTORS; i++)
>>> + entries[i].entry = i;
>>> + r = pci_enable_msix_range(pdev, entries, 1, ARCMST_NUM_MSIX_VECTORS);
>>> + if (r < 0)
>>> + goto msi_int;
>>> + acb->msix_vector_count = r;
>>> + for (i = 0; i < r; i++) {
>>> + if (request_irq(entries[i].vector,
>>> + arcmsr_do_interrupt, 0, "arcmsr", acb)) {
>>> + pr_warn("arcmsr%d: request_irq =%d failed!\n",
>>> + acb->host->host_no, pdev->irq);
>>> + for (j = 0 ; j < i ; j++)
>>> + free_irq(entries[j].vector, acb);
>>> + pci_disable_msix(pdev);
>>> + goto msi_int;
>>> + }
>>> + acb->entries[i] = entries[i];
>>> + }
>>> + acb->acb_flags |= ACB_F_MSIX_ENABLED;
>>> + pr_info("arcmsr%d: msi-x enabled\n", acb->host->host_no);
>>> + return ARC_SUCCESS;
>>> +msi_int:
>>> + if (!pci_find_capability(pdev, PCI_CAP_ID_MSI))
>>> + goto legacy_int;
>>> + if (pci_enable_msi_range(pdev, 1, 1) < 0)
>>> + goto legacy_int;
>>> + if (request_irq(pdev->irq, arcmsr_do_interrupt,
>>> + IRQF_SHARED, "arcmsr", acb)) {
>>> + pr_warn("arcmsr%d: request_irq =%d failed!\n",
>>> + acb->host->host_no, pdev->irq);
>>> + pci_disable_msi(pdev);
>>> + goto legacy_int;
>>> + }
>>> + acb->acb_flags |= ACB_F_MSI_ENABLED;
>>> + pr_info("arcmsr%d: msi enabled\n", acb->host->host_no);
>>> + return ARC_SUCCESS;
>>> +legacy_int:
>>> + if (request_irq(pdev->irq, arcmsr_do_interrupt,
>>> + IRQF_SHARED, "arcmsr", acb)) {
>>> + pr_warn("arcmsr%d: request_irq = %d failed!\n",
>>> + acb->host->host_no, pdev->irq);
>>> + return ARC_FAILURE;
>>> + }
>>> + return ARC_SUCCESS;
>>> +}
>>> +
>>> static int arcmsr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>>> {
>>> struct Scsi_Host *host;
>>> @@ -667,16 +721,13 @@ static int arcmsr_probe(struct pci_dev *
>>> if(error){
>>> goto free_hbb_mu;
>>> }
>>> - arcmsr_iop_init(acb);
>>> error = scsi_add_host(host, &pdev->dev);
>>> if(error){
>>> goto RAID_controller_stop;
>> Hi Ching,
>> you have moved the arcmsr_iop_init so you probably
>> should accordingly rewrite the error path handling at the end of this function
>> I don't know if it is a problem when you call arcmsr_stop_adapter_bgrb
>> without a starting it before
>> Also when you allocate the irq you could free the irq in out_free_sysfs:
>> When you change all this you could consider moving the scsi_scan_host
>> more towards the end of that function so it's called after everything else
>> is initiated, that can be made in another patch later.
>> -tomas
>>>
>>>
>>>
>>>
>>> }
>>> - error = request_irq(pdev->irq, arcmsr_do_interrupt, IRQF_SHARED, "arcmsr", acb);
>>> - if(error){
>>> + if (arcmsr_request_irq(pdev, acb) == ARC_FAILURE)
>>> goto scsi_host_remove;
>>> - }
>>> - host->irq = pdev->irq;
>>> + arcmsr_iop_init(acb);
>>> scsi_scan_host(host);
>>> INIT_WORK(&acb->arcmsr_do_message_isr_bh, arcmsr_message_isr_bh_fn);
>>> atomic_set(&acb->rq_map_token, 16);
>>> @@ -710,6 +761,21 @@ pci_disable_dev:
>>> return -ENODEV;
>>> }
>>>
>>> +static void arcmsr_free_irq(struct pci_dev *pdev, struct AdapterControlBlock *acb)
>>> +{
>>> + int i;
>>> +
>>> + if (acb->acb_flags & ACB_F_MSI_ENABLED) {
>>> + free_irq(pdev->irq, acb);
>>> + pci_disable_msi(pdev);
>>> + } else if (acb->acb_flags & ACB_F_MSIX_ENABLED) {
>>> + for (i = 0; i < acb->msix_vector_count; i++)
>>> + free_irq(acb->entries[i].vector, acb);
>>> + pci_disable_msix(pdev);
>>> + } else
>>> + free_irq(pdev->irq, acb);
>>> +}
>>> +
>>> static uint8_t arcmsr_abort_hba_allcmd(struct AdapterControlBlock *acb)
>>> {
>>> struct MessageUnit_A __iomem *reg = acb->pmuA;
>>> @@ -992,6 +1058,7 @@ static void arcmsr_done4abort_postqueue(
>>> }
>>> }
>>> }
>>> +
>>> static void arcmsr_remove(struct pci_dev *pdev)
>>> {
>>> struct Scsi_Host *host = pci_get_drvdata(pdev);
>>> @@ -1029,7 +1096,7 @@ static void arcmsr_remove(struct pci_dev
>>> }
>>> }
>>> }
>>> - free_irq(pdev->irq, acb);
>>> + arcmsr_free_irq(pdev, acb);
>>> arcmsr_free_ccb_pool(acb);
>>> arcmsr_free_hbb_mu(acb);
>>> arcmsr_unmap_pciregion(acb);
>>> @@ -1045,6 +1112,7 @@ static void arcmsr_shutdown(struct pci_d
>>> (struct AdapterControlBlock *)host->hostdata;
>>> del_timer_sync(&acb->eternal_timer);
>>> arcmsr_disable_outbound_ints(acb);
>>> + arcmsr_free_irq(pdev, acb);
>>> flush_work(&acb->arcmsr_do_message_isr_bh);
>>> arcmsr_stop_adapter_bgrb(acb);
>>> arcmsr_flush_adapter_cache(acb);
>>> @@ -2516,8 +2584,6 @@ static int arcmsr_iop_confirm(struct Ada
>>> case ACB_ADAPTER_TYPE_A: {
>>> if (cdb_phyaddr_hi32 != 0) {
>>> struct MessageUnit_A __iomem *reg = acb->pmuA;
>>> - uint32_t intmask_org;
>>> - intmask_org = arcmsr_disable_outbound_ints(acb);
>>> writel(ARCMSR_SIGNATURE_SET_CONFIG, \
>>> ®->message_rwbuffer[0]);
>>> writel(cdb_phyaddr_hi32, ®->message_rwbuffer[1]);
>>> @@ -2529,7 +2595,6 @@ static int arcmsr_iop_confirm(struct Ada
>>> acb->host->host_no);
>>> return 1;
>>> }
>>> - arcmsr_enable_outbound_ints(acb, intmask_org);
>>> }
>>> }
>>> break;
>>> @@ -2539,8 +2604,6 @@ static int arcmsr_iop_confirm(struct Ada
>>> uint32_t __iomem *rwbuffer;
>>>
>>> struct MessageUnit_B *reg = acb->pmuB;
>>> - uint32_t intmask_org;
>>> - intmask_org = arcmsr_disable_outbound_ints(acb);
>>> reg->postq_index = 0;
>>> reg->doneq_index = 0;
>>> writel(ARCMSR_MESSAGE_SET_POST_WINDOW, reg->drv2iop_doorbell);
>>> @@ -2569,7 +2632,6 @@ static int arcmsr_iop_confirm(struct Ada
>>> return 1;
>>> }
>>> arcmsr_hbb_enable_driver_mode(acb);
>>> - arcmsr_enable_outbound_ints(acb, intmask_org);
>>> }
>>> break;
>>> case ACB_ADAPTER_TYPE_C: {
>>>
>>>
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
>>> the body of a message to majordomo@...r.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists