Date:	Sun, 25 May 2014 06:04:12 -0400
From:	"werner" <w.landgraf@...ru>
To:	linux-kernel@...r.kernel.org, a.gruenbacher@...puter.org
Subject: 3.15-rc6  build / link failed  fs/built-in  mb_cache_entry
  problems

building the kernel isnt successful,

problem with _mbècache_entry_release and _get

see below

there are also other errors


The whole compiler list and config, see enclosed




Since appr 3.10 ,  even if the kernels compile and build , 
 on meanwhile 70% of the computers where I try to boot, 
the booting process crashs on different positions.

Currently, the quality is rather bad, similar as it was 
during the versions  2.6.30 ... 36 .

So it would be good, if the programmers would check 
everything more careful   (im not a programmer but only an 
user)

Enclosed is a compiling list, someone could see through 
this, and correct all problems, such as mismatches, 
undefined variables, etc


W.Landgraf





..

   CHECK   include/asm-generic (35 files)
   CHECK   include/drm (18 files)
   CHECK   include/linux/byteorder (2 files)
   CHECK   include/linux/caif (2 files)
   CHECK   include/linux/can (5 files)
   CHECK   include/linux/dvb (8 files)
   CHECK   include/linux/hdlc (1 files)
   CHECK   include/linux/hsi (1 files)
   CHECK   include/linux/isdn (1 files)
   CHECK   include/linux/mmc (1 files)
   CHECK   include/linux/netfilter/ipset (4 files)
   CHECK   include/linux/netfilter (85 files)
   CHECK   include/linux/netfilter_arp (2 files)
   CHECK   include/linux/netfilter_bridge (18 files)
   CHECK   include/linux/netfilter_ipv4 (10 files)
   CHECK   include/linux/netfilter_ipv6 (12 files)
   CHECK   include/linux/nfsd (5 files)
   CHECK   include/linux/raid (2 files)
   CHECK   include/linux/spi (1 files)
   CHECK   include/linux/sunrpc (1 files)
   CHECK   include/linux/tc_act (8 files)
   CHECK   include/linux/tc_ematch (4 files)
   CHECK   include/linux/usb (10 files)
   CHECK   include/linux/wimax (1 files)
   CHECK   include/linux (393 files)
/usr/src/linux-3.15-rc6-i486-1sys/usr/include/linux/kexec.h:50: 
userspace cannot reference function or variable defined in 
the kernel
   CHECK   include/mtd (5 files)
   CHECK   include/rdma (6 files)
   CHECK   include/scsi/fc (4 files)
   CHECK   include/scsi (3 files)
   CHECK   include/sound (11 files)
   CHECK   include/video (3 files)
   CHECK   include/xen (4 files)
   CHECK   include/uapi (0 files)
   CHECK   include/asm (64 files)
   LINK    vmlinux
   LD      vmlinux.o
   MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0xa2889): Section mismatch in 
reference from the function intel_scu_devices_create() to 
the function .init.text:i2c_register_board_info()
The function intel_scu_devices_create() references
the function __init i2c_register_board_info().
This is often because intel_scu_devices_create lacks a 
__init
annotation or the annotation of i2c_register_board_info is 
wrong.

WARNING: vmlinux.o(.text+0x108c2e0): Section mismatch in 
reference from the function acpi_sleep_dmi_check() to the 
variable .init.data:acpisleep_dmi_table
The function acpi_sleep_dmi_check() references
the variable __initdata acpisleep_dmi_table.
This is often because acpi_sleep_dmi_check lacks a 
__initdata
annotation or the annotation of acpisleep_dmi_table is 
wrong.

WARNING: vmlinux.o(.data+0xbefa0): Section mismatch in 
reference from the variable sim710_eisa_driver to the 
function .init.text:sim710_eisa_probe()
The variable sim710_eisa_driver references
the function __init sim710_eisa_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or 
name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, 
*_console

   GEN     .version
   CC      init/main.o
   CHK     include/generated/compile.h
   UPD     include/generated/compile.h
   CC      init/version.o
   CC      init/do_mounts.o
   CC      init/do_mounts_rd.o
   CC      init/do_mounts_initrd.o
   CC      init/do_mounts_md.o
   LD      init/mounts.o
   CC      init/initramfs.o
   CC      init/calibrate.o
   CC      init/init_task.o
   LD      init/built-in.o
fs/built-in.o: In function `__mb_cache_entry_release':
mbcache.c:(.text+0xa0d5f): undefined reference to `log2'
mbcache.c:(.text+0xa0d6b): undefined reference to 
`__fixunsdfsi'
mbcache.c:(.text+0xa0e22): undefined reference to `log2'
mbcache.c:(.text+0xa0e34): undefined reference to 
`__fixunsdfsi'
mbcache.c:(.text+0xa0f4e): undefined reference to `log2'
mbcache.c:(.text+0xa0f60): undefined reference to 
`__fixunsdfsi'
fs/built-in.o: In function `__mb_cache_entry_find':
mbcache.c:(.text+0xa107e): undefined reference to `log2'
mbcache.c:(.text+0xa108a): undefined reference to 
`__fixunsdfsi'
mbcache.c:(.text+0xa115c): undefined reference to `log2'
mbcache.c:(.text+0xa116e): undefined reference to 
`__fixunsdfsi'
mbcache.c:(.text+0xa11dc): undefined reference to `log2'
mbcache.c:(.text+0xa11e8): undefined reference to 
`__fixunsdfsi'
mbcache.c:(.text+0xa126e): undefined reference to `log2'
mbcache.c:(.text+0xa1280): undefined reference to 
`__fixunsdfsi'
fs/built-in.o: In function `mb_cache_entry_get':
(.text+0xa3bdc): undefined reference to `log2'
fs/built-in.o: In function `mb_cache_entry_get':
(.text+0xa3bf1): undefined reference to `__fixunsdfsi'
fs/built-in.o: In function `mb_cache_entry_get':
(.text+0xa3d14): undefined reference to `log2'
fs/built-in.o: In function `mb_cache_entry_get':
(.text+0xa3d26): undefined reference to `__fixunsdfsi'
fs/built-in.o: In function `mb_cache_entry_get':
(.text+0xa3da7): undefined reference to `log2'
fs/built-in.o: In function `mb_cache_entry_get':
(.text+0xa3db3): undefined reference to `__fixunsdfsi'
fs/built-in.o: In function `mb_cache_entry_get':
(.text+0xa3e5e): undefined reference to `log2'
fs/built-in.o: In function `mb_cache_entry_get':
(.text+0xa3e70): undefined reference to `__fixunsdfsi'
make: [vmlinux] Error 1 (ignored)
   CC      arch/x86/boot/a20.o
   AS      arch/x86/boot/bioscall.o
   CC      arch/x86/boot/cmdline.o
   AS      arch/x86/boot/copy.o
   HOSTCC  arch/x86/boot/mkcpustr
   CPUSTR  arch/x86/boot/cpustr.h
   CC      arch/x86/boot/cpu.o
   CC      arch/x86/boot/cpuflags.o
   CC      arch/x86/boot/cpucheck.o
   CC      arch/x86/boot/early_serial_console.o
   CC      arch/x86/boot/edd.o
make[1]: *** No rule to make target `vmlinux', needed by 
`arch/x86/boot/voffset.h'.
   LDS     arch/x86/boot/compressed/vmlinux.lds
   AS      arch/x86/boot/compressed/head_32.o
   CC      arch/x86/boot/compressed/misc.o
   CC      arch/x86/boot/compressed/string.o
   CC      arch/x86/boot/compressed/cmdline.o
   CC      arch/x86/boot/compressed/early_serial_console.o
make[2]: *** No rule to make target `vmlinux', needed by 
`arch/x86/boot/compressed/vmlinux.bin'.
   HOSTCC  arch/x86/boot/compressed/mkpiggy
   CC      arch/x86/boot/compressed/cpuflags.o
   CC      arch/x86/boot/compressed/aslr.o
make[2]: Target `arch/x86/boot/compressed/vmlinux' not 
remade because of errors.
make[1]: [arch/x86/boot/compressed/vmlinux] Error 2 
(ignored)
   ZOFFSET arch/x86/boot/zoffset.h
nm: 'arch/x86/boot/compressed/vmlinux': No such file
   CC      arch/x86/boot/main.o
   CC      arch/x86/boot/mca.o
   CC      arch/x86/boot/memory.o
   CC      arch/x86/boot/pm.o
   AS      arch/x86/boot/pmjump.o
   CC      arch/x86/boot/printf.o
   CC      arch/x86/boot/regs.o
   CC      arch/x86/boot/string.o
   CC      arch/x86/boot/tty.o
   CC      arch/x86/boot/video.o
   CC      arch/x86/boot/video-mode.o
   CC      arch/x86/boot/version.o
   CC      arch/x86/boot/apm.o
   CC      arch/x86/boot/video-vga.o
   CC      arch/x86/boot/video-vesa.o
   CC      arch/x86/boot/video-bios.o
   OBJCOPY arch/x86/boot/vmlinux.bin
objcopy: 'arch/x86/boot/compressed/vmlinux': No such file
make[1]: [arch/x86/boot/vmlinux.bin] Error 1 (ignored)
   HOSTCC  arch/x86/boot/tools/build
make[1]: Target `arch/x86/boot/bzImage' not remade because 
of errors.
make: [bzImage] Error 2 (ignored)
   Building modules, stage 2.
   MODPOST 3521 modules
WARNING: drivers/net/ethernet/3com/3c509.o(.data+0x120): 
Section mismatch in reference from the variable 
el3_eisa_driver to the function 
.init.text:el3_eisa_probe()
The variable el3_eisa_driver references
the function __init el3_eisa_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or 
name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, 
*_console

WARNING: drivers/net/ethernet/3com/3c59x.o(.data+0x4c0): 
Section mismatch in reference from the variable 
vortex_eisa_driver to the function 
.init.text:vortex_eisa_probe()
The variable vortex_eisa_driver references
the function __init vortex_eisa_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or 
name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, 
*_console

WARNING: 
drivers/net/ethernet/dec/tulip/de4x5.o(.data+0xc0): 
Section mismatch in reference from the variable 
de4x5_eisa_driver to the function 
.init.text:de4x5_eisa_probe()
The variable de4x5_eisa_driver references
the function __init de4x5_eisa_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or 
name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, 
*_console

WARNING: drivers/net/ethernet/hp/hp100.o(.data+0x40): 
Section mismatch in reference from the variable 
hp100_eisa_driver to the function 
.init.text:hp100_eisa_probe()
The variable hp100_eisa_driver references
the function __init hp100_eisa_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or 
name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, 
*_console

   CC      arch/x86/crypto/crc32-pclmul.mod.o
   LD [M]  arch/x86/crypto/crc32-pclmul.ko
   CC      arch/x86/crypto/crc32c-intel.mod.o
   LD [M]  arch/x86/crypto/crc32c-intel.ko



.....
---
Professional hosting for everyone - http://www.host.ru

Download attachment "linux-3.15-rc6-i486-1sys.log.bz2" of type "application/octet-stream" (104811 bytes)

Download attachment "config-3.15-rc6-i486-1sys.bz2" of type "application/octet-stream" (40906 bytes)

View attachment "kernel.error.txt" of type "text/plain" (8891 bytes)

Powered by blists - more mailing lists