lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Mon,  9 Jun 2014 16:19:56 +0800
From:	Jiang Liu <jiang.liu@...ux.intel.com>
To:	Benjamin Herrenschmidt <benh@...nel.crashing.org>,
	Thomas Gleixner <tglx@...utronix.de>,
	Grant Likely <grant.likely@...aro.org>,
	Ingo Molnar <mingo@...hat.com>,
	"H. Peter Anvin" <hpa@...or.com>,
	"Rafael J. Wysocki" <rjw@...ysocki.net>,
	Bjorn Helgaas <bhelgaas@...gle.com>,
	Randy Dunlap <rdunlap@...radead.org>,
	Yinghai Lu <yinghai@...nel.org>, x86@...nel.org,
	Len Brown <lenb@...nel.org>,
	David Cohen <david.a.cohen@...ux.intel.com>,
	Kuppuswamy Sathyanarayanan 
	<sathyanarayanan.kuppuswamy@...ux.intel.com>,
	Jiang Liu <jiang.liu@...ux.intel.com>
Cc:	Konrad Rzeszutek Wilk <konrad.wilk@...cle.com>,
	Andrew Morton <akpm@...ux-foundation.org>,
	Tony Luck <tony.luck@...el.com>,
	Joerg Roedel <joro@...tes.org>,
	Paul Gortmaker <paul.gortmaker@...driver.com>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
	linux-acpi@...r.kernel.org, "H. Peter Anvin" <hpa@...ux.intel.com>,
	sfi-devel@...plefirmware.org
Subject: [Patch V4 27/42] x86, SFI, irq: provide basic irqdomain support

Enhance SFI to provide basic support of irqdomain with identity mapping
between GSIs and IRQs.

Some Intel MID platforms assumes identity mapping between GSI and IRQ,
so we can't dynamically allocate IRQ number on demand.

Signed-off-by: Jiang Liu <jiang.liu@...ux.intel.com>
---
 arch/x86/pci/intel_mid_pci.c      |    3 +++
 arch/x86/platform/intel-mid/sfi.c |    2 ++
 arch/x86/platform/sfi/sfi.c       |    8 +++++++-
 3 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c
index 84b9d672843d..fcbdc5fac2c6 100644
--- a/arch/x86/pci/intel_mid_pci.c
+++ b/arch/x86/pci/intel_mid_pci.c
@@ -217,6 +217,9 @@ static int intel_mid_pci_irq_enable(struct pci_dev *dev)
 	 * MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
 	 * IOAPIC RTE entries, so we just enable RTE for the device.
 	 */
+	if (mp_map_gsi_to_irq(dev->irq, IOAPIC_MAP_ALLOC) < 0)
+		return -EBUSY;
+
 	irq_attr.ioapic = mp_find_ioapic(dev->irq);
 	irq_attr.ioapic_pin = dev->irq;
 	irq_attr.trigger = 1; /* level */
diff --git a/arch/x86/platform/intel-mid/sfi.c b/arch/x86/platform/intel-mid/sfi.c
index 994c40bd7cb7..7161395e7de7 100644
--- a/arch/x86/platform/intel-mid/sfi.c
+++ b/arch/x86/platform/intel-mid/sfi.c
@@ -473,6 +473,8 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
 					/* PNW and CLV go with active low */
 					irq_attr.polarity = 1;
 				}
+				WARN_ON(mp_map_gsi_to_irq(irq,
+						IOAPIC_MAP_ALLOC) < 0);
 				io_apic_set_pci_routing(NULL, irq, &irq_attr);
 			}
 		} else {
diff --git a/arch/x86/platform/sfi/sfi.c b/arch/x86/platform/sfi/sfi.c
index 8f2f789c6f04..1fdaa57f41a5 100644
--- a/arch/x86/platform/sfi/sfi.c
+++ b/arch/x86/platform/sfi/sfi.c
@@ -25,6 +25,7 @@
 #include <linux/init.h>
 #include <linux/sfi.h>
 #include <linux/io.h>
+#include <linux/irqdomain.h>
 
 #include <asm/io_apic.h>
 #include <asm/mpspec.h>
@@ -70,19 +71,24 @@ static int __init sfi_parse_cpus(struct sfi_table_header *table)
 #endif /* CONFIG_X86_LOCAL_APIC */
 
 #ifdef CONFIG_X86_IO_APIC
+static struct irq_domain_ops sfi_ioapic_irqdomain_ops;
 
 static int __init sfi_parse_ioapic(struct sfi_table_header *table)
 {
 	struct sfi_table_simple *sb;
 	struct sfi_apic_table_entry *pentry;
 	int i, num;
+	struct ioapic_domain_cfg cfg = {
+		.type = IOAPIC_DOMAIN_STRICT,
+		.ops = &sfi_ioapic_irqdomain_ops,
+	};
 
 	sb = (struct sfi_table_simple *)table;
 	num = SFI_GET_NUM_ENTRIES(sb, struct sfi_apic_table_entry);
 	pentry = (struct sfi_apic_table_entry *)sb->pentry;
 
 	for (i = 0; i < num; i++) {
-		mp_register_ioapic(i, pentry->phys_addr, gsi_top, NULL);
+		mp_register_ioapic(i, pentry->phys_addr, gsi_top, &cfg);
 		pentry++;
 	}
 
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ