| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 11 Jul 2014 07:56:54 +0000
From: "Gupta, Pekon" <pekon@...com>
To: "Quadros, Roger" <rogerq@...com>,
"tony@...mide.com" <tony@...mide.com>,
"computersforpeace@...il.com" <computersforpeace@...il.com>
CC: "javier@...hile0.org" <javier@...hile0.org>,
"ezequiel.garcia@...e-electrons.com"
<ezequiel.garcia@...e-electrons.com>,
"dwmw2@...radead.org" <dwmw2@...radead.org>,
"jg1.han@...sung.com" <jg1.han@...sung.com>,
"Nori, Sekhar" <nsekhar@...com>,
"linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>,
"linux-omap@...r.kernel.org" <linux-omap@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [RFC PATCH 09/10] mtd: nand: omap: Use GPMC APIs for accessing
ECC/BCH engine
Roger,
>From: Quadros, Roger
>Don't access the ECC/BCH engine registers directly as they belong
>to the GPMC controller's register space. Use the relevant
>GPMC APIs instead.
>
>Signed-off-by: Roger Quadros <rogerq@...com>
>---
> drivers/mtd/nand/omap2.c | 191 +++++++++++++++++++----------------------------
> 1 file changed, 76 insertions(+), 115 deletions(-)
>
>diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
>index 420ef0b..6b0f953 100644
>--- a/drivers/mtd/nand/omap2.c
>+++ b/drivers/mtd/nand/omap2.c
>@@ -1123,71 +1088,67 @@ static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info
>*mtd,
> switch (info->ecc_opt) {
> case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
> case OMAP_ECC_BCH8_CODE_HW:
>- bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]);
>- bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]);
>- bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]);
>- bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]);
>- *ecc_code++ = (bch_val4 & 0xFF);
>- *ecc_code++ = ((bch_val3 >> 24) & 0xFF);
>- *ecc_code++ = ((bch_val3 >> 16) & 0xFF);
>- *ecc_code++ = ((bch_val3 >> 8) & 0xFF);
>- *ecc_code++ = (bch_val3 & 0xFF);
>- *ecc_code++ = ((bch_val2 >> 24) & 0xFF);
>- *ecc_code++ = ((bch_val2 >> 16) & 0xFF);
>- *ecc_code++ = ((bch_val2 >> 8) & 0xFF);
>- *ecc_code++ = (bch_val2 & 0xFF);
>- *ecc_code++ = ((bch_val1 >> 24) & 0xFF);
>- *ecc_code++ = ((bch_val1 >> 16) & 0xFF);
>- *ecc_code++ = ((bch_val1 >> 8) & 0xFF);
>- *ecc_code++ = (bch_val1 & 0xFF);
>+ omap_gpmc_ecc_get_bch_result(4, i, bch_val);
>+ *ecc_code++ = (bch_val[3] & 0xFF);
>+ *ecc_code++ = ((bch_val[2] >> 24) & 0xFF);
>+ *ecc_code++ = ((bch_val[2] >> 16) & 0xFF);
>+ *ecc_code++ = ((bch_val[2] >> 8) & 0xFF);
>+ *ecc_code++ = (bch_val[2] & 0xFF);
>+ *ecc_code++ = ((bch_val[1] >> 24) & 0xFF);
>+ *ecc_code++ = ((bch_val[1] >> 16) & 0xFF);
>+ *ecc_code++ = ((bch_val[1] >> 8) & 0xFF);
>+ *ecc_code++ = (bch_val[1] & 0xFF);
>+ *ecc_code++ = ((bch_val[0] >> 24) & 0xFF);
>+ *ecc_code++ = ((bch_val[0] >> 16) & 0xFF);
>+ *ecc_code++ = ((bch_val[0] >> 8) & 0xFF);
>+ *ecc_code++ = (bch_val[0] & 0xFF);
> break;
> case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
> case OMAP_ECC_BCH4_CODE_HW:
>- bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]);
>- bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]);
>- *ecc_code++ = ((bch_val2 >> 12) & 0xFF);
>- *ecc_code++ = ((bch_val2 >> 4) & 0xFF);
>- *ecc_code++ = ((bch_val2 & 0xF) << 4) |
>- ((bch_val1 >> 28) & 0xF);
>- *ecc_code++ = ((bch_val1 >> 20) & 0xFF);
>- *ecc_code++ = ((bch_val1 >> 12) & 0xFF);
>- *ecc_code++ = ((bch_val1 >> 4) & 0xFF);
>- *ecc_code++ = ((bch_val1 & 0xF) << 4);
>+ omap_gpmc_ecc_get_bch_result(2, i, bch_val);
>+ *ecc_code++ = ((bch_val[1] >> 12) & 0xFF);
>+ *ecc_code++ = ((bch_val[1] >> 4) & 0xFF);
>+ *ecc_code++ = ((bch_val[1] & 0xF) << 4) |
>+ ((bch_val[0] >> 28) & 0xF);
>+ *ecc_code++ = ((bch_val[0] >> 20) & 0xFF);
>+ *ecc_code++ = ((bch_val[0] >> 12) & 0xFF);
>+ *ecc_code++ = ((bch_val[0] >> 4) & 0xFF);
>+ *ecc_code++ = ((bch_val[0] & 0xF) << 4);
> break;
> case OMAP_ECC_BCH16_CODE_HW:
>- val = readl(gpmc_regs->gpmc_bch_result6[i]);
>- ecc_code[0] = ((val >> 8) & 0xFF);
>- ecc_code[1] = ((val >> 0) & 0xFF);
>- val = readl(gpmc_regs->gpmc_bch_result5[i]);
>- ecc_code[2] = ((val >> 24) & 0xFF);
>- ecc_code[3] = ((val >> 16) & 0xFF);
>- ecc_code[4] = ((val >> 8) & 0xFF);
>- ecc_code[5] = ((val >> 0) & 0xFF);
>- val = readl(gpmc_regs->gpmc_bch_result4[i]);
>- ecc_code[6] = ((val >> 24) & 0xFF);
>- ecc_code[7] = ((val >> 16) & 0xFF);
>- ecc_code[8] = ((val >> 8) & 0xFF);
>- ecc_code[9] = ((val >> 0) & 0xFF);
>- val = readl(gpmc_regs->gpmc_bch_result3[i]);
>- ecc_code[10] = ((val >> 24) & 0xFF);
>- ecc_code[11] = ((val >> 16) & 0xFF);
>- ecc_code[12] = ((val >> 8) & 0xFF);
>- ecc_code[13] = ((val >> 0) & 0xFF);
>- val = readl(gpmc_regs->gpmc_bch_result2[i]);
>- ecc_code[14] = ((val >> 24) & 0xFF);
>- ecc_code[15] = ((val >> 16) & 0xFF);
>- ecc_code[16] = ((val >> 8) & 0xFF);
>- ecc_code[17] = ((val >> 0) & 0xFF);
>- val = readl(gpmc_regs->gpmc_bch_result1[i]);
>- ecc_code[18] = ((val >> 24) & 0xFF);
>- ecc_code[19] = ((val >> 16) & 0xFF);
>- ecc_code[20] = ((val >> 8) & 0xFF);
>- ecc_code[21] = ((val >> 0) & 0xFF);
>- val = readl(gpmc_regs->gpmc_bch_result0[i]);
>- ecc_code[22] = ((val >> 24) & 0xFF);
>- ecc_code[23] = ((val >> 16) & 0xFF);
>- ecc_code[24] = ((val >> 8) & 0xFF);
>- ecc_code[25] = ((val >> 0) & 0xFF);
>+ omap_gpmc_ecc_get_bch_result(7, i, bch_val);
>+ ecc_code[0] = ((bch_val[6] >> 8) & 0xFF);
>+ ecc_code[1] = ((bch_val[6] >> 0) & 0xFF);
>+
>+ ecc_code[2] = ((bch_val[5] >> 24) & 0xFF);
>+ ecc_code[3] = ((bch_val[5] >> 16) & 0xFF);
>+ ecc_code[4] = ((bch_val[5] >> 8) & 0xFF);
>+ ecc_code[5] = ((bch_val[5] >> 0) & 0xFF);
>+
>+ ecc_code[6] = ((bch_val[4] >> 24) & 0xFF);
>+ ecc_code[7] = ((bch_val[4] >> 16) & 0xFF);
>+ ecc_code[8] = ((bch_val[4] >> 8) & 0xFF);
>+ ecc_code[9] = ((bch_val[4] >> 0) & 0xFF);
>+
>+ ecc_code[10] = ((bch_val[3] >> 24) & 0xFF);
>+ ecc_code[11] = ((bch_val[3] >> 16) & 0xFF);
>+ ecc_code[12] = ((bch_val[3] >> 8) & 0xFF);
>+ ecc_code[13] = ((bch_val[3] >> 0) & 0xFF);
>+
>+ ecc_code[14] = ((bch_val[2] >> 24) & 0xFF);
>+ ecc_code[15] = ((bch_val[2] >> 16) & 0xFF);
>+ ecc_code[16] = ((bch_val[2] >> 8) & 0xFF);
>+ ecc_code[17] = ((bch_val[2] >> 0) & 0xFF);
>+
>+ ecc_code[18] = ((bch_val[1] >> 24) & 0xFF);
>+ ecc_code[19] = ((bch_val[1] >> 16) & 0xFF);
>+ ecc_code[20] = ((bch_val[1] >> 8) & 0xFF);
>+ ecc_code[21] = ((bch_val[1] >> 0) & 0xFF);
>+
>+ ecc_code[22] = ((bch_val[0] >> 24) & 0xFF);
>+ ecc_code[23] = ((bch_val[0] >> 16) & 0xFF);
>+ ecc_code[24] = ((bch_val[0] >> 8) & 0xFF);
>+ ecc_code[25] = ((bch_val[0] >> 0) & 0xFF);
> break;
> default:
> return -EINVAL;
>--
>1.8.3.2
Again same feedback.
You won't need all these changes, if you move this function
completely into GPMC driver, leaving only the wrapper here
which make the GPMC function compatible to chip->ecc.calculate.
with regards, pekon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists