lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Tue, 15 Jul 2014 15:42:30 -0700
From:	Stephen Boyd <sboyd@...eaurora.org>
To:	linux-arm-msm@...r.kernel.org
Cc:	linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	Mike Turquette <mturquette@...aro.org>
Subject: [PATCH 1/2] clk: qcom: Fix PLL rate configurations

Sometimes we need to program PLLs with a fixed rate
configuration during driver probe. Doing this after we register
the PLLs with the clock framework causes the common clock
framework to assume the rate of the PLLs are 0. This causes all
sorts of problems for rate recalculations because the common
clock framework caches the rate once at registration time unless
a flag is set to always recalculate the rates.

Split the qcom_cc_probe() function into two pieces, map and
everything else, so that drivers which need to configure some
PLL rates or otherwise twiddle bits in the clock controller can
do so before registering clocks. This allows us to properly
detect the rates of PLLs that are programmed at boot.

Fixes: 49fc825f0cc2 "clk: qcom: Consolidate common probe code"
Signed-off-by: Stephen Boyd <sboyd@...eaurora.org>
---
 drivers/clk/qcom/common.c       | 39 ++++++++++++++++++++++++++++-----------
 drivers/clk/qcom/common.h       |  6 ++++++
 drivers/clk/qcom/mmcc-msm8974.c | 10 ++++------
 3 files changed, 38 insertions(+), 17 deletions(-)

diff --git a/drivers/clk/qcom/common.c b/drivers/clk/qcom/common.c
index 9b5a1cfc6b91..eeb3eea01f4c 100644
--- a/drivers/clk/qcom/common.c
+++ b/drivers/clk/qcom/common.c
@@ -27,30 +27,35 @@ struct qcom_cc {
 	struct clk *clks[];
 };
 
-int qcom_cc_probe(struct platform_device *pdev, const struct qcom_cc_desc *desc)
+struct regmap *
+qcom_cc_map(struct platform_device *pdev, const struct qcom_cc_desc *desc)
 {
 	void __iomem *base;
 	struct resource *res;
+	struct device *dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return ERR_CAST(base);
+
+	return devm_regmap_init_mmio(dev, base, desc->config);
+}
+EXPORT_SYMBOL_GPL(qcom_cc_map);
+
+int qcom_cc_really_probe(struct platform_device *pdev,
+			 const struct qcom_cc_desc *desc, struct regmap *regmap)
+{
 	int i, ret;
 	struct device *dev = &pdev->dev;
 	struct clk *clk;
 	struct clk_onecell_data *data;
 	struct clk **clks;
-	struct regmap *regmap;
 	struct qcom_reset_controller *reset;
 	struct qcom_cc *cc;
 	size_t num_clks = desc->num_clks;
 	struct clk_regmap **rclks = desc->clks;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
-
-	regmap = devm_regmap_init_mmio(dev, base, desc->config);
-	if (IS_ERR(regmap))
-		return PTR_ERR(regmap);
-
 	cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks,
 			  GFP_KERNEL);
 	if (!cc)
@@ -91,6 +96,18 @@ int qcom_cc_probe(struct platform_device *pdev, const struct qcom_cc_desc *desc)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(qcom_cc_really_probe);
+
+int qcom_cc_probe(struct platform_device *pdev, const struct qcom_cc_desc *desc)
+{
+	struct regmap *regmap;
+
+	regmap = qcom_cc_map(pdev, desc);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	return qcom_cc_really_probe(pdev, desc, regmap);
+}
 EXPORT_SYMBOL_GPL(qcom_cc_probe);
 
 void qcom_cc_remove(struct platform_device *pdev)
diff --git a/drivers/clk/qcom/common.h b/drivers/clk/qcom/common.h
index 2c3cfc860348..2765e9d3da97 100644
--- a/drivers/clk/qcom/common.h
+++ b/drivers/clk/qcom/common.h
@@ -17,6 +17,7 @@ struct platform_device;
 struct regmap_config;
 struct clk_regmap;
 struct qcom_reset_map;
+struct regmap;
 
 struct qcom_cc_desc {
 	const struct regmap_config *config;
@@ -26,6 +27,11 @@ struct qcom_cc_desc {
 	size_t num_resets;
 };
 
+extern struct regmap *qcom_cc_map(struct platform_device *pdev,
+				  const struct qcom_cc_desc *desc);
+extern int qcom_cc_really_probe(struct platform_device *pdev,
+				const struct qcom_cc_desc *desc,
+				struct regmap *regmap);
 extern int qcom_cc_probe(struct platform_device *pdev,
 			 const struct qcom_cc_desc *desc);
 
diff --git a/drivers/clk/qcom/mmcc-msm8974.c b/drivers/clk/qcom/mmcc-msm8974.c
index c65b90515872..bc8f519c47aa 100644
--- a/drivers/clk/qcom/mmcc-msm8974.c
+++ b/drivers/clk/qcom/mmcc-msm8974.c
@@ -2547,18 +2547,16 @@ MODULE_DEVICE_TABLE(of, mmcc_msm8974_match_table);
 
 static int mmcc_msm8974_probe(struct platform_device *pdev)
 {
-	int ret;
 	struct regmap *regmap;
 
-	ret = qcom_cc_probe(pdev, &mmcc_msm8974_desc);
-	if (ret)
-		return ret;
+	regmap = qcom_cc_map(pdev, &mmcc_msm8974_desc);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
 
-	regmap = dev_get_regmap(&pdev->dev, NULL);
 	clk_pll_configure_sr_hpm_lp(&mmpll1, regmap, &mmpll1_config, true);
 	clk_pll_configure_sr_hpm_lp(&mmpll3, regmap, &mmpll3_config, false);
 
-	return 0;
+	return qcom_cc_really_probe(pdev, &mmcc_msm8974_desc, regmap);
 }
 
 static int mmcc_msm8974_remove(struct platform_device *pdev)
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ