linux-kernel - Re: [PATCH v3 07/12] usb: chipidea: add a usb2 driver for ci13xxx

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 25 Jul 2014 10:07:38 +0200
From:	Antoine Ténart 
	<antoine.tenart@...e-electrons.com>
To:	Peter Chen <peter.chen@...escale.com>
Cc:	Antoine Ténart 
	<antoine.tenart@...e-electrons.com>,
	sebastian.hesselbarth@...il.com, balbi@...com,
	p.zabel@...gutronix.de, alexandre.belloni@...e-electrons.com,
	thomas.petazzoni@...e-electrons.com, zmxu@...vell.com,
	jszhang@...vell.com, linux-arm-kernel@...ts.infradead.org,
	linux-usb@...r.kernel.org, devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 07/12] usb: chipidea: add a usb2 driver for ci13xxx

Hi Peter,

On Fri, Jul 25, 2014 at 10:18:54AM +0800, Peter Chen wrote:
> On Wed, Jul 16, 2014 at 10:26:01AM +0200, Antoine Ténart wrote:
> > Add a USB2 ChipIdea driver for ci13xxx, with optional PHY, clock
> > and DMA mask, to support USB2 ChipIdea controllers that don't need
> > specific functions.
> 
> You may need to indicate it is a generic usb2 glue layer driver at both
> subject and context.

"USB2 ChipIdea driver for ci13xxx" seemed quite generic to me.

> > 
> > Needed for the Marvell Berlin SoCs USB controllers.
> 
> You can say it is tested at Marvell Berlin SoCs USB controllers.

Ok, I'll explicitly say it.

> > +
> > +static int ci_hdrc_usb2_dt_probe(struct device *dev,
> > +				    struct ci_hdrc_platform_data *ci_pdata,
> > +				    struct ci_hdrc_usb2_priv *priv)
> > +{
> > +	u32 mask;
> > +	int ret;
> > +
> > +	priv->clk = devm_clk_get(dev, NULL);
> > +	if (!IS_ERR(priv->clk)) {
> > +		ret = clk_prepare_enable(priv->clk);
> > +		if (ret) {
> > +			dev_err(dev, "failed to enable the clock: %d\n", ret);
> > +			return ret;
> > +		}
> > +	}
> 
> The clk API may be needed for both DT and non-DT cases.

Yes sure, I'll move this to the ci_hdrc_usb2_probe().

> 
> > +
> > +	ci_pdata->phy = of_phy_get(dev->of_node, 0);
> > +	if (IS_ERR(ci_pdata->phy)) {
> > +		if (PTR_ERR(ci_pdata->phy) == -EPROBE_DEFER)
> > +			return -EPROBE_DEFER;
> > +
> > +		/* PHY is optional */
> > +		ci_pdata->phy = NULL;
> > +	}
> > +
> > +	if (of_property_read_u32(dev->of_node, "dma-mask", &mask))
> > +		priv->dma_mask = mask;
> > +
> According to discussion, you may not need dma_mask in driver any more,
> and use below API for both DT and non-DT case.
> 
>         err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
>         if (err)
>         	                handle error;

This would only be needed in non-dt cases, as the DMA mask is configured
in drivers/of/platform.c otherwise.

Thanks!

Antoine

-- 
Antoine Ténart, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/