linux-kernel - [PATCH RESEND v2 0/7] vf610: Add USB support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:	Mon, 18 Aug 2014 22:07:10 +0200
From:	Stefan Agner <stefan@...er.ch>
To:	peter.chen@...escale.com, s.hauer@...gutronix.de,
	kernel@...gutronix.de, shawn.guo@...escale.com, balbi@...com,
	gregkh@...uxfoundation.org
Cc:	jingchang.lu@...escale.com, linux-arm-kernel@...ts.infradead.org,
	linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
	stefan@...er.ch
Subject: [PATCH RESEND v2 0/7] vf610: Add USB support

This patchset adds USB support for Vybrid VF610 SoC. It extends the
clock framework to support the USB PHY cocks, extends the device
tree files and adds support for the non-core registers in the
usbmisc_imx driver.

This patchset needs the eSDHC registers length fix available in
Shawn's for-next branch, since that overlapped by chance the USB
areas.

The whole patchset proved to be working on a Colibri VF61 and
Freescale Tower VF65GS10. The first USB controller runs in
peripheral mode. I could successfully use RNDIS, however with some
stability issues: Suddenly the other side was not reachable anymore
and the interface needed to brought down and back up again. I'm
still investigating this.

The second USB controller, running in USB host mode, showed errors
when connecting devices behind a USB hub:

[  215.163507] usb usb1-port1: cannot reset (err = -32)
[  215.170498] usb usb1-port1: cannot reset (err = -32)
[  215.185120] usb usb1-port1: cannot reset (err = -32)
[  215.191345] usb usb1-port1: cannot reset (err = -32)
[  215.202487] usb usb1-port1: cannot reset (err = -32)
[  215.207718] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
[  215.219317] usb usb1-port1: unable to enumerate USB device

By extending the PHY driver with the MXS_PHY_NEED_IP_FIX flag, this
issue is resolved.

Resend, also added Felipe Balbi this time, sorry about that. I think
I only miss the Ack/Review from you here and then things should be
fine.

Changes in v2:
- Extended usbmisc_imx to support multiple instances
- Update DT documentation and compatible strings where necessary
- Add USB PHY flag MXS_PHY_NEED_IP_FIX
- Added patches to enable USB on Tower

Stefan Agner (7):
  ARM: dts: vf610: Add USB PHY and controller
  ARM: imx: clk-vf610: Add USBPHY clocks
  usb: phy: mxs: Add VF610 USB PHY support
  ARM: dts: vf610: Add usbmisc for non-core registers
  chipidea: usbmisc_imx: Add USB support for VF610 SoCs
  ARM: dts: vf610-colibri: Add USB support
  ARM: dts: vf610-twr: Add USB support

 Documentation/devicetree/bindings/usb/mxs-phy.txt  |  1 +
 .../devicetree/bindings/usb/usbmisc-imx.txt        |  1 +
 arch/arm/boot/dts/vf610-colibri.dts                | 10 ++++
 arch/arm/boot/dts/vf610-twr.dts                    | 10 ++++
 arch/arm/boot/dts/vf610.dtsi                       | 60 ++++++++++++++++++++--
 arch/arm/mach-imx/clk-vf610.c                      | 12 ++++-
 drivers/usb/chipidea/ci_hdrc_imx.c                 |  8 +++
 drivers/usb/chipidea/ci_hdrc_imx.h                 |  1 +
 drivers/usb/chipidea/usbmisc_imx.c                 | 52 +++++++++++++++----
 drivers/usb/phy/phy-mxs-usb.c                      |  6 +++
 include/dt-bindings/clock/vf610-clock.h            |  5 +-
 11 files changed, 149 insertions(+), 17 deletions(-)

-- 
2.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/