[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Tue, 9 Sep 2014 16:42:46 -0400
From: Murali Karicheri <m-karicheri2@...com>
To: Arnd Bergmann <arnd@...db.de>
CC: <linux-arm-kernel@...ts.infradead.org>, <robh+dt@...nel.org>,
<pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
<bhelgaas@...gle.com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-pci@...r.kernel.org>
Subject: Re: [PATCH v2 2/2] PCI: keystone: update to support multiple pci
ports
On 09/09/2014 04:28 PM, Arnd Bergmann wrote:
> On Tuesday 09 September 2014 16:17:15 Murali Karicheri wrote:
>> K2E SoC has two PCI ports. The SATA controller is connected to second
>> PCI port (port 1). This patch enhances the driver to support multiple
>> ports.
>>
>> Update the DT Documentation for the new attribute, ti,pcie-port and
>> remove the note for bootargs as this is no longer needed.
>>
>> Signed-off-by: Murali Karicheri<m-karicheri2@...com>
>> ---
>> - updated based on comment against v1
>> .../devicetree/bindings/pci/pci-keystone.txt | 8 +++++---
>> drivers/pci/host/pci-keystone.c | 15 ++++++++++-----
>> drivers/pci/host/pci-keystone.h | 4 ++--
>> 3 files changed, 17 insertions(+), 10 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt
>> index bedacf0..c8f5773 100644
>> --- a/Documentation/devicetree/bindings/pci/pci-keystone.txt
>> +++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt
>> @@ -56,11 +56,13 @@ Optional properties:-
>> phy-names: name of the Generic Keystine SerDes phy for PCI
>> - If boot loader already does PCI link establishment, then phys and
>> phy-names shouldn't be present.
>> + ti,pcie-port: PCI port number. This is used to configure the PCI port
>> + number. For example K2E SoC supports 2 PCI ports and PCI bindings
>> + for the second port adds ti,pcie-port =<1> to identify second port
>> + and driver uses this to configure the PCI mode register for second
>> + port. If not present, port number 0 is assumed.
>
> Is this still needed? I thought with patch 1 removed, we no longer had
> a reason to know the port number.
>
You are right. I will remove it and re-send.
>> -=========================
>> -Driver requires pci=pcie_bus_perf in the bootargs for proper functioning.
>> diff --git a/drivers/pci/host/pci-keystone.c b/drivers/pci/host/pci-keystone.c
>> index f1119eb..893820d 100644
>> --- a/drivers/pci/host/pci-keystone.c
>> +++ b/drivers/pci/host/pci-keystone.c
>> @@ -253,8 +253,8 @@ static int keystone_pcie_fault(unsigned long addr, unsigned int fsr,
>>
>> static void __init ks_pcie_host_init(struct pcie_port *pp)
>> {
>> - u32 vendor_device_id, val;
>> struct keystone_pcie *ks_pcie = to_keystone_pcie(pp);
>> + u32 val;
>>
>> ks_pcie_establish_link(ks_pcie);
>> ks_dw_pcie_setup_rc_app_regs(ks_pcie);
>> @@ -263,8 +263,7 @@ static void __init ks_pcie_host_init(struct pcie_port *pp)
>> pp->dbi_base + PCI_IO_BASE);
>>
>> /* update the Vendor ID */
>> - vendor_device_id = readl(ks_pcie->va_reg_pciid);
>> - writew((vendor_device_id>> 16), pp->dbi_base + PCI_DEVICE_ID);
>> + writew(ks_pcie->device_id, pp->dbi_base + PCI_DEVICE_ID);
>>
>> /* update the DEV_STAT_CTRL to publish right mrrs */
>> val = readl(pp->dbi_base + PCIE_CAP_BASE + PCI_EXP_DEVCTL);
>
> This change must have slipped in accidentally, at least it's not
> described in the changelog. Should this be another patch?
> The change seems useful.
Are you referring to mrrs or update to device id? device id is in a SoC
register at index2 and is read and updated by the driver here. MRRS
update was originally in the code.
Murali
>
> Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists