lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Wed, 10 Sep 2014 09:56:39 +0800 From: Wang YanQing <udknight@...il.com> To: Johan Hovold <johan@...nel.org> Cc: Benjamin Henrion <zoobab@...il.com>, gregkh@...uxfoundation.org, linus.walleij@...aro.org, jhovold@...il.com, andi@...as.de, dforsi@...il.com, gnomes@...rguk.ukuu.org.uk, linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org Subject: Re: [PATCH v8] usb:serial:pl2303: add GPIOs interface on PL2303 On Tue, Sep 09, 2014 at 04:02:04PM +0200, Johan Hovold wrote: > On Tue, Sep 09, 2014 at 12:43:56PM +0200, Johan Hovold wrote: > > On Tue, Sep 09, 2014 at 06:21:31PM +0800, Wang YanQing wrote: > > > On Tue, Sep 09, 2014 at 12:08:56PM +0200, Johan Hovold wrote: > > > > On Fri, Sep 05, 2014 at 09:30:11AM +0800, Wang YanQing wrote: > > > > > On Thu, Sep 04, 2014 at 06:44:31PM +0200, Benjamin Henrion wrote: > > > > > > On Thu, Sep 4, 2014 at 6:14 PM, Benjamin Henrion <zoobab@...il.com> wrote: > > > > > > > I have subscribed to the lkml. > > > > > > > > > > > > > > Can you make me a favour, send me your email as you posted on the LKML > > > > > > > in mbox format attached to an email? > > > > > > > > > > > > > > I am trying to reply to it, but I cannot find an mbox archive, outside > > > > > > > of gmane which rewrites all the email addresses. > > > > > > > > > > > > > > Otherwise, I made a page here: > > > > > > > > > > > > > > http://www.zoobab.com/pl2303hxd-gpio > > > > > > > > > > > > > > I will also try with other adapters to see if the 2 GPIOs show up. > > > > > > > > > > > > > > Any idea how to test the GPIO sysfs speed? > > > > > > > > > > > > Also tested with an HXA laying around, I could export the 2 GPIOS in > > > > > > /sys/class/gpio, but I could not change the status of the pins via > > > > > > echo. > > > > > > > > > > > > Any idea why? > > > > > > > > > > It is strange, I have tested again with my two HXA adapters, they work well. > > > > > How do you test? check cat value or check voltage change? I check cat value, > > > > > and they work good. > > > > > > > > So you haven't verified that the voltage actually changes? > > > > > > > > Johan > > > > > > I have verified the voltage actually changes in previous patch version, > > > but I haven't verified that with v8. > > > > Ok, good. I'll get back to you with some comments on v8 shortly. > > Wait a minute. You restructured the driver, added support for two new > gpios as well as another device type, so you need to verify the voltage > on the pins (on both device types) as well. Benjamin Henrion had verified voltage on pins of HXD, see http://www.zoobab.com/pl2303hxd-gpio Sorry I don't have pinout version of PL2303 RA, so I can't verified voltage on it, I only can test it by echo & cat. Thanks. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists