[ 0.000000] Linux version 3.14.17-gentoo (root@quad) (gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.4, pie-0.5.5) ) #2 SMP Thu Sep 11 15:13:52 CEST 2014 [ 0.000000] Command line: root=/dev/sda2 dyndbg="file drivers/pci/* +pf" log_buf_len=10M [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000997ff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000099800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000ca000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffdffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007ffe9fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007ffea000-0x000000007fffffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x00000000cfbfffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfc00000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000a2fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: NVIDIA CK8 /Tyan Transport VX50-B4985, BIOS TYAN Transport VX50 B4985 BIOS V3.01.B30 11/27/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0xa30000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000a30000000 aka 41728M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcfc00 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f7770-0x000f777f] mapped at [ffff8800000f7770] [ 0.000000] Base memory trampoline at [ffff880000093000] 93000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01930000, 0x01930fff] PGTABLE [ 0.000000] BRK [0x01931000, 0x01931fff] PGTABLE [ 0.000000] BRK [0x01932000, 0x01932fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xa2fe00000-0xa2fffffff] [ 0.000000] [mem 0xa2fe00000-0xa2fffffff] page 2M [ 0.000000] BRK [0x01933000, 0x01933fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xa2c000000-0xa2fdfffff] [ 0.000000] [mem 0xa2c000000-0xa2fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0xa00000000-0xa2bffffff] [ 0.000000] [mem 0xa00000000-0xa2bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7ffdffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x7fdfffff] page 2M [ 0.000000] [mem 0x7fe00000-0x7ffdffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x80000000-0xcfbfffff] [ 0.000000] [mem 0x80000000-0xbfffffff] page 1G [ 0.000000] [mem 0xc0000000-0xcfbfffff] page 2M [ 0.000000] BRK [0x01934000, 0x01934fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x9ffffffff] [ 0.000000] [mem 0x100000000-0x9ffffffff] page 1G [ 0.000000] log_buf_len: 16777216 [ 0.000000] early log buf free: 257896(98%) [ 0.000000] ACPI: RSDP 00000000000f77f0 000014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 000000007ffe0aab 000038 (v01 PTLTD RSDT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 000000007ffe4c98 000074 (v01 NVIDIA CK8S 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT 000000007ffe0ae3 0041B5 (v01 NVIDIA CK8 06040000 MSFT 0100000E) [ 0.000000] ACPI: FACS 000000007ffeafc0 000040 [ 0.000000] ACPI: SSDT 000000007ffe4d0c 005084 (v01 AMD POWERNOW 06040000 AMD 00000001) [ 0.000000] ACPI: SPCR 000000007ffe9d90 000050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001) [ 0.000000] ACPI: APIC 000000007ffe9de0 0001F8 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 000000007ffe9fd8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of physical nodes 8 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000130000000 [ 0.000000] Node 1 MemBase 0000000130000000 Limit 0000000230000000 [ 0.000000] Node 2 MemBase 0000000230000000 Limit 0000000330000000 [ 0.000000] Node 3 MemBase 0000000330000000 Limit 0000000430000000 [ 0.000000] Node 4 MemBase 0000000430000000 Limit 0000000530000000 [ 0.000000] Node 5 MemBase 0000000530000000 Limit 0000000630000000 [ 0.000000] Node 6 MemBase 0000000630000000 Limit 0000000830000000 [ 0.000000] Node 7 MemBase 0000000830000000 Limit 0000000a30000000 [ 0.000000] BSP APIC ID: 04 [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff] [ 0.000000] NODE_DATA [mem 0x12fffc000-0x12fffffff] [ 0.000000] Initmem setup node 1 [mem 0x130000000-0x22fffffff] [ 0.000000] NODE_DATA [mem 0x22fffc000-0x22fffffff] [ 0.000000] Initmem setup node 2 [mem 0x230000000-0x32fffffff] [ 0.000000] NODE_DATA [mem 0x32fffc000-0x32fffffff] [ 0.000000] Initmem setup node 3 [mem 0x330000000-0x42fffffff] [ 0.000000] NODE_DATA [mem 0x42fffc000-0x42fffffff] [ 0.000000] Initmem setup node 4 [mem 0x430000000-0x52fffffff] [ 0.000000] NODE_DATA [mem 0x52fffc000-0x52fffffff] [ 0.000000] Initmem setup node 5 [mem 0x530000000-0x62fffffff] [ 0.000000] NODE_DATA [mem 0x62fffc000-0x62fffffff] [ 0.000000] Initmem setup node 6 [mem 0x630000000-0x82fffffff] [ 0.000000] NODE_DATA [mem 0x82fffc000-0x82fffffff] [ 0.000000] Initmem setup node 7 [mem 0x830000000-0xa2fffffff] [ 0.000000] NODE_DATA [mem 0xa2effa000-0xa2effdfff] [ 0.000000] [ffffea0004280000-ffffea00043fffff] potential offnode page_structs [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012be00000-ffff88012f7fffff] on node 0 [ 0.000000] [ffffea0007a80000-ffffea0007bfffff] potential offnode page_structs [ 0.000000] [ffffea0004400000-ffffea0007bfffff] PMD -> [ffff88022be00000-ffff88022f5fffff] on node 1 [ 0.000000] [ffffea000b280000-ffffea000b3fffff] potential offnode page_structs [ 0.000000] [ffffea0007c00000-ffffea000b3fffff] PMD -> [ffff88032be00000-ffff88032f5fffff] on node 2 [ 0.000000] [ffffea000ea80000-ffffea000ebfffff] potential offnode page_structs [ 0.000000] [ffffea000b400000-ffffea000ebfffff] PMD -> [ffff88042be00000-ffff88042f5fffff] on node 3 [ 0.000000] [ffffea0012280000-ffffea00123fffff] potential offnode page_structs [ 0.000000] [ffffea000ec00000-ffffea00123fffff] PMD -> [ffff88052be00000-ffff88052f5fffff] on node 4 [ 0.000000] [ffffea0015a80000-ffffea0015bfffff] potential offnode page_structs [ 0.000000] [ffffea0012400000-ffffea0015bfffff] PMD -> [ffff88062be00000-ffff88062f5fffff] on node 5 [ 0.000000] [ffffea001ca80000-ffffea001cbfffff] potential offnode page_structs [ 0.000000] [ffffea0015c00000-ffffea001cbfffff] PMD -> [ffff880827e00000-ffff88082edfffff] on node 6 [ 0.000000] [ffffea001cc00000-ffffea0023bfffff] PMD -> [ffff880a26600000-ffff880a2d5fffff] on node 7 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0xa2fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00098fff] [ 0.000000] node 0: [mem 0x00100000-0x7ffdffff] [ 0.000000] node 0: [mem 0x80000000-0xcfbfffff] [ 0.000000] node 0: [mem 0x100000000-0x12fffffff] [ 0.000000] node 1: [mem 0x130000000-0x22fffffff] [ 0.000000] node 2: [mem 0x230000000-0x32fffffff] [ 0.000000] node 3: [mem 0x330000000-0x42fffffff] [ 0.000000] node 4: [mem 0x430000000-0x52fffffff] [ 0.000000] node 5: [mem 0x530000000-0x62fffffff] [ 0.000000] node 6: [mem 0x630000000-0x82fffffff] [ 0.000000] node 7: [mem 0x830000000-0xa2fffffff] [ 0.000000] On node 0 totalpages: 1047416 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3992 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11578 pages used for memmap [ 0.000000] DMA32 zone: 846816 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 1048576 [ 0.000000] Normal zone: 14336 pages used for memmap [ 0.000000] Normal zone: 1048576 pages, LIFO batch:31 [ 0.000000] On node 2 totalpages: 1048576 [ 0.000000] Normal zone: 14336 pages used for memmap [ 0.000000] Normal zone: 1048576 pages, LIFO batch:31 [ 0.000000] On node 3 totalpages: 1048576 [ 0.000000] Normal zone: 14336 pages used for memmap [ 0.000000] Normal zone: 1048576 pages, LIFO batch:31 [ 0.000000] On node 4 totalpages: 1048576 [ 0.000000] Normal zone: 14336 pages used for memmap [ 0.000000] Normal zone: 1048576 pages, LIFO batch:31 [ 0.000000] On node 5 totalpages: 1048576 [ 0.000000] Normal zone: 14336 pages used for memmap [ 0.000000] Normal zone: 1048576 pages, LIFO batch:31 [ 0.000000] On node 6 totalpages: 2097152 [ 0.000000] Normal zone: 28672 pages used for memmap [ 0.000000] Normal zone: 2097152 pages, LIFO batch:31 [ 0.000000] On node 7 totalpages: 2097152 [ 0.000000] Normal zone: 28672 pages used for memmap [ 0.000000] Normal zone: 2097152 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x09] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0a] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0b] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0c] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x0d] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0e] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0f] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x16] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x17] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x18] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x19] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x1a] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x1b] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x1c] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x1d] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x1e] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x1f] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x20] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x21] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x22] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x23] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 32 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x00099000-0x00099fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000c9fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000ca000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ffe0000-0x7ffe9fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ffea000-0x7fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcfc00000-0xcfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfff7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfff80000-0xffffffff] [ 0.000000] e820: [mem 0xd0000000-0xdfffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:8 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88012fc00000 s79488 r8192 d22912 u524288 [ 0.000000] pcpu-alloc: s79488 r8192 d22912 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 [1] 04 05 06 07 [ 0.000000] pcpu-alloc: [2] 08 09 10 11 [3] 12 13 14 15 [ 0.000000] pcpu-alloc: [4] 16 17 18 19 [5] 20 21 22 23 [ 0.000000] pcpu-alloc: [6] 24 25 26 27 [7] 28 29 30 31 [ 0.000000] Built 8 zonelists in Zone order, mobility grouping on. Total pages: 10341233 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda2 dyndbg="file drivers/pci/* +pf" log_buf_len=10M [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ d0000000 size 64 MB [ 0.000000] Node 1: aperture @ d0000000 size 64 MB [ 0.000000] Node 2: aperture @ d0000000 size 64 MB [ 0.000000] Node 3: aperture @ d0000000 size 64 MB [ 0.000000] Node 4: aperture @ d0000000 size 64 MB [ 0.000000] Node 5: aperture @ d0000000 size 64 MB [ 0.000000] Node 6: aperture @ d0000000 size 64 MB [ 0.000000] Node 7: aperture @ d0000000 size 64 MB [ 0.000000] Memory: 41266584K/41938400K available (4454K kernel code, 649K rwdata, 2432K rodata, 932K init, 896K bss, 671816K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:936 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1908.658 MHz processor [ 0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 3817.31 BogoMIPS (lpj=7634632) [ 0.000329] pid_max: default: 32768 minimum: 301 [ 0.000579] ACPI: Core revision 20131218 [ 0.006528] ACPI: All ACPI Tables successfully acquired [ 0.015465] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes) [ 0.066707] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.090158] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.090484] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.092728] tseg: 00cfc00000 [ 0.092734] CPU: Physical Processor ID: 0 [ 0.092879] CPU: Processor Core ID: 0 [ 0.093027] mce: CPU supports 6 MCE banks [ 0.093207] LVT offset 0 assigned for vector 0xf9 [ 0.093364] process: using AMD E400 aware idle routine [ 0.093518] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 tlb_flushall_shift: 6 [ 0.094072] Freeing SMP alternatives memory: 20K (ffffffff81849000 - ffffffff8184e000) [ 0.094437] Switched APIC routing to physical flat. [ 0.095043] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.135586] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 HE (fam: 10, model: 02, stepping: 03) [ 0.241922] Performance Events: AMD PMU driver. [ 0.242124] ... version: 0 [ 0.242259] ... bit width: 48 [ 0.242404] ... generic registers: 4 [ 0.242550] ... value mask: 0000ffffffffffff [ 0.242698] ... max period: 00007fffffffffff [ 0.242845] ... fixed-purpose events: 0 [ 0.242980] ... event mask: 000000000000000f [ 0.245184] x86: Booting SMP configuration: [ 0.245357] .... node #0, CPUs: #1 #2 #3 [ 0.287335] .... node #1, CPUs: #4 #5 #6 #7 [ 0.439816] .... node #2, CPUs: #8 #9 #10 #11 [ 0.593471] .... node #3, CPUs: #12 #13 #14 #15 [ 0.744071] .... node #4, CPUs: #16 #17 #18 #19 [ 0.895677] .... node #5, CPUs: #20 #21 #22 #23 [ 1.047829] .... node #6, CPUs: #24 #25 #26 #27 [ 1.200042] .... node #7, CPUs: #28 #29 #30 #31 [ 1.351581] x86: Booted up 8 nodes, 32 CPUs [ 1.351890] smpboot: Total of 32 processors activated (122217.63 BogoMIPS) [ 1.373768] devtmpfs: initialized [ 1.374599] PM: Registering ACPI NVS region [mem 0x7ffea000-0x7fffffff] (90112 bytes) [ 1.376069] NET: Registered protocol family 16 [ 1.376875] cpuidle: using governor ladder [ 1.377024] cpuidle: using governor menu [ 1.377178] node 0 link 1: io port [1000, 3fff] [ 1.377182] node 1 link 1: io port [b000, bfff] [ 1.377185] node 1 link 1: io port [9000, 9fff] [ 1.377189] TOM: 00000000d0000000 aka 3328M [ 1.377340] node 0 link 1: mmio [d4000000, dbffffff] [ 1.377345] node 1 link 1: mmio [dc000000, dc3fffff] [ 1.377348] node 0 link 1: mmio [a0000, bffff] [ 1.377351] node 0 link 1: mmio [e0000000, e7ffffff] [ 1.377353] node 1 link 1: mmio [e8000000, efffffff] [ 1.377356] TOM2: 0000000a30000000 aka 41728M [ 1.377508] bus: [bus 00-7f] on node 0 link 1 [ 1.377510] bus: 00 [io 0x0000-0x8fff] [ 1.377512] bus: 00 [io 0xc000-0xffff] [ 1.377513] bus: 00 [io 0xa000-0xafff] [ 1.377515] bus: 00 [mem 0xd0000000-0xdbffffff] [ 1.377516] bus: 00 [mem 0x000a0000-0x000bffff] [ 1.377518] bus: 00 [mem 0xdc400000-0xe7ffffff] [ 1.377519] bus: 00 [mem 0xf0000000-0xffffffff] [ 1.377520] bus: 00 [mem 0xa30000000-0xfcffffffff] [ 1.377522] bus: [bus 80-ff] on node 1 link 1 [ 1.377523] bus: 80 [io 0xb000-0xbfff] [ 1.377524] bus: 80 [io 0x9000-0x9fff] [ 1.377526] bus: 80 [mem 0xdc000000-0xdc3fffff] [ 1.377527] bus: 80 [mem 0xe8000000-0xefffffff] [ 1.377696] ACPI: bus type PCI registered [ 1.378072] PCI: Using configuration type 1 for base access [ 1.378217] PCI: Using configuration type 1 for extended access [ 1.395387] bio: create slab at 0 [ 1.396595] ACPI: Added _OSI(Module Device) [ 1.396745] ACPI: Added _OSI(Processor Device) [ 1.396892] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.397039] ACPI: Added _OSI(Processor Aggregator Device) [ 1.413235] ACPI: Interpreter enabled [ 1.413419] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580) [ 1.413758] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-580) [ 1.414097] ACPI: (supports S0 S1 S4 S5) [ 1.414239] ACPI: Using IOAPIC for interrupt routing [ 1.414498] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.414984] ACPI: No dock devices found. [ 1.435180] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-07]) [ 1.435377] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.435541] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 1.436054] acpi PNP0A03:00: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000ca000-0x000fffff]) [ 1.436432] PCI host bridge to bus 0000:00 [ 1.436608] pci_bus 0000:00: root bus resource [bus 00-07] [ 1.436764] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 1.436916] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff] [ 1.437070] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 1.437221] pci_bus 0000:00: root bus resource [mem 0xd4000000-0xdbffffff] [ 1.437377] pci_scan_child_bus: pci_bus 0000:00: scanning bus [ 1.437400] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 [ 1.437691] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 [ 1.437749] fixup_debug_start: pci 0000:00:01.0: calling nvidia_force_enable_hpet+0x0/0xaa [ 1.437751] HPET not enabled in BIOS. You might try hpet=force boot option [ 1.438156] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 [ 1.438169] pci 0000:00:01.1: reg 0x10: [io 0x0000-0x001f] [ 1.438202] pci 0000:00:01.1: reg 0x20: [io 0xa000-0xa03f] [ 1.438207] pci 0000:00:01.1: reg 0x24: [io 0xa040-0xa07f] [ 1.438239] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 1.438244] pci_pme_active: pci 0000:00:01.1: PME# disabled [ 1.438447] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 [ 1.438458] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd4000fff] [ 1.438504] pci 0000:00:02.0: supports D1 D2 [ 1.438506] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.438525] pci_pme_active: pci 0000:00:02.0: PME# disabled [ 1.438609] pci 0000:00:02.0: System wakeup disabled by ACPI [ 1.438886] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 [ 1.438900] pci 0000:00:02.1: reg 0x10: [mem 0xd4001000-0xd40010ff] [ 1.438942] pci 0000:00:02.1: supports D1 D2 [ 1.438954] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 1.438973] pci_pme_active: pci 0000:00:02.1: PME# disabled [ 1.439083] pci 0000:00:02.1: System wakeup disabled by ACPI [ 1.439352] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a [ 1.439388] pci 0000:00:06.0: reg 0x20: [io 0x1400-0x140f] [ 1.439626] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 [ 1.439633] pci 0000:00:07.0: reg 0x10: [io 0x1440-0x1447] [ 1.439646] pci 0000:00:07.0: reg 0x14: [io 0x1434-0x1437] [ 1.439652] pci 0000:00:07.0: reg 0x18: [io 0x1438-0x143f] [ 1.439657] pci 0000:00:07.0: reg 0x1c: [io 0x1430-0x1433] [ 1.439662] pci 0000:00:07.0: reg 0x20: [io 0x1410-0x141f] [ 1.439667] pci 0000:00:07.0: reg 0x24: [mem 0xd4002000-0xd4002fff] [ 1.439909] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 [ 1.439923] pci 0000:00:08.0: reg 0x10: [io 0x1458-0x145f] [ 1.439933] pci 0000:00:08.0: reg 0x14: [io 0x144c-0x144f] [ 1.439947] pci 0000:00:08.0: reg 0x18: [io 0x1450-0x1457] [ 1.439970] pci 0000:00:08.0: reg 0x1c: [io 0x1448-0x144b] [ 1.439974] pci 0000:00:08.0: reg 0x20: [io 0x1420-0x142f] [ 1.439980] pci 0000:00:08.0: reg 0x24: [mem 0xd4003000-0xd4003fff] [ 1.440218] pci 0000:00:09.0: [10de:005c] type 01 class 0x060401 [ 1.440341] pci 0000:00:09.0: System wakeup disabled by ACPI [ 1.440607] pci 0000:00:0a.0: [10de:0057] type 00 class 0x068000 [ 1.440621] pci 0000:00:0a.0: reg 0x10: [mem 0xd4004000-0xd4004fff] [ 1.440630] pci 0000:00:0a.0: reg 0x14: [io 0x1460-0x1467] [ 1.440664] pci 0000:00:0a.0: supports D1 D2 [ 1.440667] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.440677] pci_pme_active: pci 0000:00:0a.0: PME# disabled [ 1.440787] pci 0000:00:0a.0: System wakeup disabled by ACPI [ 1.441056] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 [ 1.441130] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.441143] pci_pme_active: pci 0000:00:0b.0: PME# disabled [ 1.441364] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 [ 1.441404] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.441416] pci_pme_active: pci 0000:00:0c.0: PME# disabled [ 1.441654] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 [ 1.441705] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.441709] pci_pme_active: pci 0000:00:0d.0: PME# disabled [ 1.441915] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 [ 1.441959] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.441962] pci_pme_active: pci 0000:00:0e.0: PME# disabled [ 1.442200] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 1.442209] fixup_debug_start: pci 0000:00:18.0: calling quirk_mmio_always_on+0x0/0x5 [ 1.442409] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 1.442414] fixup_debug_start: pci 0000:00:18.1: calling quirk_mmio_always_on+0x0/0x5 [ 1.442634] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 1.442639] fixup_debug_start: pci 0000:00:18.2: calling quirk_mmio_always_on+0x0/0x5 [ 1.442887] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 1.442892] fixup_debug_start: pci 0000:00:18.3: calling quirk_mmio_always_on+0x0/0x5 [ 1.443099] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 1.443104] fixup_debug_start: pci 0000:00:18.4: calling quirk_mmio_always_on+0x0/0x5 [ 1.443328] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 [ 1.443333] fixup_debug_start: pci 0000:00:19.0: calling quirk_mmio_always_on+0x0/0x5 [ 1.443547] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 [ 1.443561] fixup_debug_start: pci 0000:00:19.1: calling quirk_mmio_always_on+0x0/0x5 [ 1.443748] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 [ 1.443752] fixup_debug_start: pci 0000:00:19.2: calling quirk_mmio_always_on+0x0/0x5 [ 1.443960] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 [ 1.443964] fixup_debug_start: pci 0000:00:19.3: calling quirk_mmio_always_on+0x0/0x5 [ 1.444191] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 [ 1.444196] fixup_debug_start: pci 0000:00:19.4: calling quirk_mmio_always_on+0x0/0x5 [ 1.444414] pci 0000:00:1a.0: [1022:1200] type 00 class 0x060000 [ 1.444418] fixup_debug_start: pci 0000:00:1a.0: calling quirk_mmio_always_on+0x0/0x5 [ 1.444640] pci 0000:00:1a.1: [1022:1201] type 00 class 0x060000 [ 1.444645] fixup_debug_start: pci 0000:00:1a.1: calling quirk_mmio_always_on+0x0/0x5 [ 1.444855] pci 0000:00:1a.2: [1022:1202] type 00 class 0x060000 [ 1.444860] fixup_debug_start: pci 0000:00:1a.2: calling quirk_mmio_always_on+0x0/0x5 [ 1.445085] pci 0000:00:1a.3: [1022:1203] type 00 class 0x060000 [ 1.445090] fixup_debug_start: pci 0000:00:1a.3: calling quirk_mmio_always_on+0x0/0x5 [ 1.445337] pci 0000:00:1a.4: [1022:1204] type 00 class 0x060000 [ 1.445341] fixup_debug_start: pci 0000:00:1a.4: calling quirk_mmio_always_on+0x0/0x5 [ 1.445569] pci 0000:00:1b.0: [1022:1200] type 00 class 0x060000 [ 1.445574] fixup_debug_start: pci 0000:00:1b.0: calling quirk_mmio_always_on+0x0/0x5 [ 1.445799] pci 0000:00:1b.1: [1022:1201] type 00 class 0x060000 [ 1.445803] fixup_debug_start: pci 0000:00:1b.1: calling quirk_mmio_always_on+0x0/0x5 [ 1.446024] pci 0000:00:1b.2: [1022:1202] type 00 class 0x060000 [ 1.446029] fixup_debug_start: pci 0000:00:1b.2: calling quirk_mmio_always_on+0x0/0x5 [ 1.446260] pci 0000:00:1b.3: [1022:1203] type 00 class 0x060000 [ 1.446265] fixup_debug_start: pci 0000:00:1b.3: calling quirk_mmio_always_on+0x0/0x5 [ 1.446477] pci 0000:00:1b.4: [1022:1204] type 00 class 0x060000 [ 1.446482] fixup_debug_start: pci 0000:00:1b.4: calling quirk_mmio_always_on+0x0/0x5 [ 1.446811] pci 0000:00:1c.0: [1022:1200] type 00 class 0x060000 [ 1.446831] fixup_debug_start: pci 0000:00:1c.0: calling quirk_mmio_always_on+0x0/0x5 [ 1.447216] pci 0000:00:1c.1: [1022:1201] type 00 class 0x060000 [ 1.447222] fixup_debug_start: pci 0000:00:1c.1: calling quirk_mmio_always_on+0x0/0x5 [ 1.447447] pci 0000:00:1c.2: [1022:1202] type 00 class 0x060000 [ 1.447451] fixup_debug_start: pci 0000:00:1c.2: calling quirk_mmio_always_on+0x0/0x5 [ 1.447672] pci 0000:00:1c.3: [1022:1203] type 00 class 0x060000 [ 1.447677] fixup_debug_start: pci 0000:00:1c.3: calling quirk_mmio_always_on+0x0/0x5 [ 1.447906] pci 0000:00:1c.4: [1022:1204] type 00 class 0x060000 [ 1.447911] fixup_debug_start: pci 0000:00:1c.4: calling quirk_mmio_always_on+0x0/0x5 [ 1.448132] pci 0000:00:1d.0: [1022:1200] type 00 class 0x060000 [ 1.448140] fixup_debug_start: pci 0000:00:1d.0: calling quirk_mmio_always_on+0x0/0x5 [ 1.448389] pci 0000:00:1d.1: [1022:1201] type 00 class 0x060000 [ 1.448393] fixup_debug_start: pci 0000:00:1d.1: calling quirk_mmio_always_on+0x0/0x5 [ 1.448590] pci 0000:00:1d.2: [1022:1202] type 00 class 0x060000 [ 1.448595] fixup_debug_start: pci 0000:00:1d.2: calling quirk_mmio_always_on+0x0/0x5 [ 1.448825] pci 0000:00:1d.3: [1022:1203] type 00 class 0x060000 [ 1.448829] fixup_debug_start: pci 0000:00:1d.3: calling quirk_mmio_always_on+0x0/0x5 [ 1.449077] pci 0000:00:1d.4: [1022:1204] type 00 class 0x060000 [ 1.449082] fixup_debug_start: pci 0000:00:1d.4: calling quirk_mmio_always_on+0x0/0x5 [ 1.449330] pci 0000:00:1e.0: [1022:1200] type 00 class 0x060000 [ 1.449334] fixup_debug_start: pci 0000:00:1e.0: calling quirk_mmio_always_on+0x0/0x5 [ 1.449544] pci 0000:00:1e.1: [1022:1201] type 00 class 0x060000 [ 1.449549] fixup_debug_start: pci 0000:00:1e.1: calling quirk_mmio_always_on+0x0/0x5 [ 1.449774] pci 0000:00:1e.2: [1022:1202] type 00 class 0x060000 [ 1.449778] fixup_debug_start: pci 0000:00:1e.2: calling quirk_mmio_always_on+0x0/0x5 [ 1.450031] pci 0000:00:1e.3: [1022:1203] type 00 class 0x060000 [ 1.450036] fixup_debug_start: pci 0000:00:1e.3: calling quirk_mmio_always_on+0x0/0x5 [ 1.450263] pci 0000:00:1e.4: [1022:1204] type 00 class 0x060000 [ 1.450268] fixup_debug_start: pci 0000:00:1e.4: calling quirk_mmio_always_on+0x0/0x5 [ 1.450507] pci 0000:00:1f.0: [1022:1200] type 00 class 0x060000 [ 1.450514] fixup_debug_start: pci 0000:00:1f.0: calling quirk_mmio_always_on+0x0/0x5 [ 1.450743] pci 0000:00:1f.1: [1022:1201] type 00 class 0x060000 [ 1.450748] fixup_debug_start: pci 0000:00:1f.1: calling quirk_mmio_always_on+0x0/0x5 [ 1.450963] pci 0000:00:1f.2: [1022:1202] type 00 class 0x060000 [ 1.450973] fixup_debug_start: pci 0000:00:1f.2: calling quirk_mmio_always_on+0x0/0x5 [ 1.451178] pci 0000:00:1f.3: [1022:1203] type 00 class 0x060000 [ 1.451183] fixup_debug_start: pci 0000:00:1f.3: calling quirk_mmio_always_on+0x0/0x5 [ 1.451388] pci 0000:00:1f.4: [1022:1204] type 00 class 0x060000 [ 1.451393] fixup_debug_start: pci 0000:00:1f.4: calling quirk_mmio_always_on+0x0/0x5 [ 1.451578] pci_scan_child_bus: pci_bus 0000:00: fixups for bus [ 1.451583] pci_scan_bridge: pci 0000:00:09.0: scanning [bus 01-01] behind bridge, pass 0 [ 1.451662] pci_scan_child_bus: pci_bus 0000:01: scanning bus [ 1.451690] pci 0000:01:06.0: [8086:1076] type 00 class 0x020000 [ 1.451730] pci 0000:01:06.0: reg 0x10: [mem 0xd4120000-0xd413ffff] [ 1.451746] pci 0000:01:06.0: reg 0x14: [mem 0xd4100000-0xd411ffff] [ 1.451763] pci 0000:01:06.0: reg 0x18: [io 0x2080-0x20bf] [ 1.451785] pci 0000:01:06.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 1.451829] pci 0000:01:06.0: PME# supported from D0 D3hot D3cold [ 1.451833] pci_pme_active: pci 0000:01:06.0: PME# disabled [ 1.451959] pci 0000:01:09.0: [18ca:0020] type 00 class 0x030000 [ 1.451984] pci 0000:01:09.0: reg 0x10: [mem 0xd8000000-0xdbffffff pref] [ 1.451991] pci 0000:01:09.0: reg 0x14: [mem 0xd4140000-0xd417ffff] [ 1.452003] pci 0000:01:09.0: reg 0x18: [io 0x2000-0x207f] [ 1.452039] pci 0000:01:09.0: supports D1 D2 [ 1.452209] pci_scan_child_bus: pci_bus 0000:01: fixups for bus [ 1.452228] pci 0000:00:09.0: PCI bridge to [bus 01] (subtractive decode) [ 1.452385] pci 0000:00:09.0: bridge window [io 0x2000-0x2fff] [ 1.452389] pci 0000:00:09.0: bridge window [mem 0xd4100000-0xd41fffff] [ 1.452392] pci 0000:00:09.0: bridge window [mem 0xd8000000-0xdbffffff pref] [ 1.452395] pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.452398] pci 0000:00:09.0: bridge window [io 0x0d00-0x3fff] (subtractive decode) [ 1.452401] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.452404] pci 0000:00:09.0: bridge window [mem 0xd4000000-0xdbffffff] (subtractive decode) [ 1.452407] pci_scan_child_bus: pci_bus 0000:01: bus scan returning with max=01 [ 1.452412] pci_scan_bridge: pci 0000:00:0b.0: scanning [bus 02-02] behind bridge, pass 0 [ 1.452517] pci_scan_child_bus: pci_bus 0000:02: scanning bus [ 1.452520] pci_scan_child_bus: pci_bus 0000:02: fixups for bus [ 1.452529] pci 0000:00:0b.0: PCI bridge to [bus 02] [ 1.452681] pci_scan_child_bus: pci_bus 0000:02: bus scan returning with max=02 [ 1.452685] pci_scan_bridge: pci 0000:00:0c.0: scanning [bus 03-03] behind bridge, pass 0 [ 1.452787] pci_scan_child_bus: pci_bus 0000:03: scanning bus [ 1.452795] pci_scan_child_bus: pci_bus 0000:03: fixups for bus [ 1.452797] pci 0000:00:0c.0: PCI bridge to [bus 03] [ 1.452948] pci_scan_child_bus: pci_bus 0000:03: bus scan returning with max=03 [ 1.452952] pci_scan_bridge: pci 0000:00:0d.0: scanning [bus 05-05] behind bridge, pass 0 [ 1.453051] pci_scan_child_bus: pci_bus 0000:05: scanning bus [ 1.453059] pci_scan_child_bus: pci_bus 0000:05: fixups for bus [ 1.453062] pci 0000:00:0d.0: PCI bridge to [bus 05] [ 1.453215] pci_scan_child_bus: pci_bus 0000:05: bus scan returning with max=05 [ 1.453220] pci_scan_bridge: pci 0000:00:0e.0: scanning [bus 0a-0a] behind bridge, pass 0 [ 1.453323] pci_bus 0000:0a: busn_res: can not insert [bus 0a] under [bus 00-07] (conflicts with (null) [bus 00-07]) [ 1.453326] pci_scan_child_bus: pci_bus 0000:0a: scanning bus [ 1.453343] pci 0000:0a:00.0: [1000:0646] type 00 class 0x0c0400 [ 1.453361] pci 0000:0a:00.0: reg 0x10: [io 0x3000-0x30ff] [ 1.453380] pci 0000:0a:00.0: reg 0x14: [mem 0xd4210000-0xd4213fff 64bit] [ 1.453391] pci 0000:0a:00.0: reg 0x1c: [mem 0xd4200000-0xd420ffff 64bit] [ 1.453418] pci 0000:0a:00.0: reg 0x30: [mem 0x00000000-0x000fffff pref] [ 1.453476] pci 0000:0a:00.0: supports D1 D2 [ 1.453612] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.453885] pci_scan_child_bus: pci_bus 0000:0a: fixups for bus [ 1.453887] pci 0000:00:0e.0: PCI bridge to [bus 0a] [ 1.454042] pci 0000:00:0e.0: bridge window [io 0x3000-0x3fff] [ 1.454045] pci 0000:00:0e.0: bridge window [mem 0xd4200000-0xd42fffff] [ 1.454049] pci_scan_child_bus: pci_bus 0000:0a: bus scan returning with max=0a [ 1.454054] pci_scan_bridge: pci 0000:00:09.0: scanning [bus 01-01] behind bridge, pass 1 [ 1.454068] pci_scan_bridge: pci 0000:00:0b.0: scanning [bus 02-02] behind bridge, pass 1 [ 1.454075] pci_scan_bridge: pci 0000:00:0c.0: scanning [bus 03-03] behind bridge, pass 1 [ 1.454079] pci_scan_bridge: pci 0000:00:0d.0: scanning [bus 05-05] behind bridge, pass 1 [ 1.454083] pci_scan_bridge: pci 0000:00:0e.0: scanning [bus 0a-0a] behind bridge, pass 1 [ 1.454087] pci_scan_child_bus: pci_bus 0000:00: bus scan returning with max=0a [ 1.455036] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0 [ 1.455602] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0 [ 1.456117] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0 [ 1.456634] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0, disabled. [ 1.457183] ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled. [ 1.457739] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled. [ 1.458286] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0 [ 1.458787] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0 [ 1.459294] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0 [ 1.459785] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. [ 1.460365] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled. [ 1.460901] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled. [ 1.461451] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0 [ 1.461956] ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0, disabled. [ 1.462487] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 1.463202] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff]) [ 1.463358] acpi PNP0A03:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.463520] acpi PNP0A03:01: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 1.464151] acpi PNP0A03:01: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000ca000-0x000fffff]) [ 1.464519] PCI host bridge to bus 0000:80 [ 1.464667] pci_bus 0000:80: root bus resource [bus 80-ff] [ 1.464827] pci_bus 0000:80: root bus resource [io 0xb000-0xffff] [ 1.464978] pci_bus 0000:80: root bus resource [mem 0x000a0000-0x000bffff] [ 1.465120] pci_bus 0000:80: root bus resource [mem 0xdc000000-0xdc3fffff] [ 1.465284] pci_scan_child_bus: pci_bus 0000:80: scanning bus [ 1.465298] pci 0000:80:00.0: [10de:005e] type 00 class 0x058000 [ 1.465511] pci 0000:80:01.0: [10de:00d3] type 00 class 0x058000 [ 1.465757] pci 0000:80:07.0: [10de:0054] type 00 class 0x010185 [ 1.465771] pci 0000:80:07.0: reg 0x10: [io 0xb030-0xb037] [ 1.465781] pci 0000:80:07.0: reg 0x14: [io 0xb024-0xb027] [ 1.465790] pci 0000:80:07.0: reg 0x18: [io 0xb028-0xb02f] [ 1.465795] pci 0000:80:07.0: reg 0x1c: [io 0xb020-0xb023] [ 1.465800] pci 0000:80:07.0: reg 0x20: [io 0xb000-0xb00f] [ 1.465810] pci 0000:80:07.0: reg 0x24: [mem 0xdc000000-0xdc000fff] [ 1.466008] pci 0000:80:08.0: [10de:0055] type 00 class 0x010185 [ 1.466019] pci 0000:80:08.0: reg 0x10: [io 0xb048-0xb04f] [ 1.466043] pci 0000:80:08.0: reg 0x14: [io 0xb03c-0xb03f] [ 1.466058] pci 0000:80:08.0: reg 0x18: [io 0xb040-0xb047] [ 1.466063] pci 0000:80:08.0: reg 0x1c: [io 0xb038-0xb03b] [ 1.466078] pci 0000:80:08.0: reg 0x20: [io 0xb010-0xb01f] [ 1.466092] pci 0000:80:08.0: reg 0x24: [mem 0xdc001000-0xdc001fff] [ 1.466284] pci 0000:80:0a.0: [10de:0057] type 00 class 0x068000 [ 1.466303] pci 0000:80:0a.0: reg 0x10: [mem 0xdc002000-0xdc002fff] [ 1.466318] pci 0000:80:0a.0: reg 0x14: [io 0xb050-0xb057] [ 1.466349] pci 0000:80:0a.0: supports D1 D2 [ 1.466368] pci 0000:80:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.466378] pci_pme_active: pci 0000:80:0a.0: PME# disabled [ 1.466432] pci 0000:80:0a.0: System wakeup disabled by ACPI [ 1.466707] pci 0000:80:0b.0: [10de:005d] type 01 class 0x060400 [ 1.466776] pci 0000:80:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.466786] pci_pme_active: pci 0000:80:0b.0: PME# disabled [ 1.466957] pci 0000:80:0c.0: [10de:005d] type 01 class 0x060400 [ 1.467023] pci 0000:80:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.467026] pci_pme_active: pci 0000:80:0c.0: PME# disabled [ 1.467202] pci 0000:80:0d.0: [10de:005d] type 01 class 0x060400 [ 1.467261] pci 0000:80:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.467264] pci_pme_active: pci 0000:80:0d.0: PME# disabled [ 1.467424] pci 0000:80:0e.0: [10de:005d] type 01 class 0x060400 [ 1.467479] pci 0000:80:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.467487] pci_pme_active: pci 0000:80:0e.0: PME# disabled [ 1.467660] pci_scan_child_bus: pci_bus 0000:80: fixups for bus [ 1.467664] pci_scan_bridge: pci 0000:80:0b.0: scanning [bus 81-85] behind bridge, pass 0 [ 1.467770] pci_scan_child_bus: pci_bus 0000:81: scanning bus [ 1.467773] pci_scan_child_bus: pci_bus 0000:81: fixups for bus [ 1.467776] pci 0000:80:0b.0: PCI bridge to [bus 81-85] [ 1.467920] pci_scan_child_bus: pci_bus 0000:81: bus scan returning with max=81 [ 1.467938] pci_scan_bridge: pci 0000:80:0c.0: scanning [bus 86-8a] behind bridge, pass 0 [ 1.468072] pci_scan_child_bus: pci_bus 0000:86: scanning bus [ 1.468076] pci_scan_child_bus: pci_bus 0000:86: fixups for bus [ 1.468079] pci 0000:80:0c.0: PCI bridge to [bus 86-8a] [ 1.468233] pci_scan_child_bus: pci_bus 0000:86: bus scan returning with max=86 [ 1.468237] pci_scan_bridge: pci 0000:80:0d.0: scanning [bus 8b-8f] behind bridge, pass 0 [ 1.468368] pci_scan_child_bus: pci_bus 0000:8b: scanning bus [ 1.468371] pci_scan_child_bus: pci_bus 0000:8b: fixups for bus [ 1.468374] pci 0000:80:0d.0: PCI bridge to [bus 8b-8f] [ 1.468516] pci_scan_child_bus: pci_bus 0000:8b: bus scan returning with max=8b [ 1.468530] pci_scan_bridge: pci 0000:80:0e.0: scanning [bus 90-94] behind bridge, pass 0 [ 1.468642] pci_scan_child_bus: pci_bus 0000:90: scanning bus [ 1.468645] pci_scan_child_bus: pci_bus 0000:90: fixups for bus [ 1.468648] pci 0000:80:0e.0: PCI bridge to [bus 90-94] [ 1.468793] pci_scan_child_bus: pci_bus 0000:90: bus scan returning with max=90 [ 1.468800] pci_scan_bridge: pci 0000:80:0b.0: scanning [bus 81-85] behind bridge, pass 1 [ 1.468805] pci_scan_bridge: pci 0000:80:0c.0: scanning [bus 86-8a] behind bridge, pass 1 [ 1.468809] pci_scan_bridge: pci 0000:80:0d.0: scanning [bus 8b-8f] behind bridge, pass 1 [ 1.468813] pci_scan_bridge: pci 0000:80:0e.0: scanning [bus 90-94] behind bridge, pass 1 [ 1.468817] pci_scan_child_bus: pci_bus 0000:80: bus scan returning with max=94 [ 1.469384] vgaarb: device added: PCI:0000:01:09.0,decodes=io+mem,owns=io+mem,locks=none [ 1.469542] vgaarb: loaded [ 1.469678] vgaarb: bridge control possible 0000:01:09.0 [ 1.470672] SCSI subsystem initialized [ 1.471157] libata version 3.00 loaded. [ 1.471179] ACPI: bus type USB registered [ 1.471489] usbcore: registered new interface driver usbfs [ 1.471716] usbcore: registered new interface driver hub [ 1.471963] usbcore: registered new device driver usb [ 1.472305] PCI: Using ACPI for IRQ routing [ 1.472448] PCI: pci_cache_line_size set to 64 bytes [ 1.472462] pci 0000:00:01.1: no compatible bridge window for [io 0xa000-0xa03f] [ 1.472621] pci 0000:00:01.1: no compatible bridge window for [io 0xa040-0xa07f] [ 1.472907] e820: reserve RAM buffer [mem 0x00099800-0x0009ffff] [ 1.472911] e820: reserve RAM buffer [mem 0x7ffe0000-0x7fffffff] [ 1.472914] e820: reserve RAM buffer [mem 0xcfc00000-0xcfffffff] [ 1.473847] Switched to clocksource refined-jiffies [ 1.488268] pnp: PnP ACPI init [ 1.488458] ACPI: bus type PNP registered [ 1.489165] system 00:00: [mem 0xff800000-0xffffffff] could not be reserved [ 1.489338] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.489502] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.489657] system 00:00: [mem 0xfefff000-0xfeffffff] has been reserved [ 1.489818] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.490417] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.490922] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.491371] pnp 00:03: [dma 2] [ 1.491482] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 1.492044] pnp 00:04: [dma 1] [ 1.492278] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active) [ 1.492405] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) [ 1.492522] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.493007] system 00:07: [io 0x8000-0x807f] could not be reserved [ 1.493185] system 00:07: [io 0x8080-0x80ff] has been reserved [ 1.493339] system 00:07: [io 0x8400-0x847f] has been reserved [ 1.493491] system 00:07: [io 0x8480-0x84ff] has been reserved [ 1.493648] system 00:07: [io 0x8800-0x887f] has been reserved [ 1.493797] system 00:07: [io 0x8880-0x88ff] has been reserved [ 1.493948] system 00:07: [io 0xa000-0xa03f] has been reserved [ 1.494098] system 00:07: [io 0xa040-0xa07f] has been reserved [ 1.494238] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.494294] pnp 00:08: disabling [io 0x0010-0x001f] because it overlaps 0000:00:01.1 BAR 0 [io 0x0000-0x001f] [ 1.494564] pnp 00:08: disabling [io 0x0010-0x001f disabled] because it overlaps 0000:00:01.1 BAR 4 [io 0x0000-0x003f] [ 1.494815] pnp 00:08: disabling [io 0x0022-0x003f] because it overlaps 0000:00:01.1 BAR 4 [io 0x0000-0x003f] [ 1.495085] pnp 00:08: disabling [io 0x0010-0x001f disabled] because it overlaps 0000:00:01.1 BAR 5 [io 0x0000-0x003f] [ 1.495336] pnp 00:08: disabling [io 0x0022-0x003f disabled] because it overlaps 0000:00:01.1 BAR 5 [io 0x0000-0x003f] [ 1.495776] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 1.495929] system 00:08: [io 0x0400-0x045e] has been reserved [ 1.496092] system 00:08: [io 0x9000-0x907f] has been reserved [ 1.496246] system 00:08: [io 0x9080-0x90ff] has been reserved [ 1.496403] system 00:08: [io 0x9200-0x927f] has been reserved [ 1.496554] system 00:08: [io 0x9280-0x92ff] has been reserved [ 1.496706] system 00:08: [io 0x9400-0x947f] has been reserved [ 1.496848] system 00:08: [io 0x9480-0x94ff] has been reserved [ 1.497008] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.497038] pnp 00:09: [dma 4] [ 1.497119] pnp 00:09: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.497216] pnp 00:0a: Plug and Play ACPI device, IDs PNP0800 (active) [ 1.497319] pnp 00:0b: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.497420] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.498022] pnp: PnP ACPI: found 13 devices [ 1.498185] ACPI: bus type PNP unregistered [ 1.503134] Switched to clocksource acpi_pm [ 1.506704] pci 0000:00:0e.0: BAR 15: assigned [mem 0xd4300000-0xd43fffff pref] [ 1.506863] pci 0000:00:01.1: BAR 4: assigned [io 0x1000-0x103f] [ 1.507025] pci_update_resource: pci 0000:00:01.1: BAR 4: set to [io 0x1000-0x103f] (PCI address [0x1000-0x103f]) [ 1.507029] pci 0000:00:01.1: BAR 5: assigned [io 0x1040-0x107f] [ 1.507336] pci_update_resource: pci 0000:00:01.1: BAR 5: set to [io 0x1040-0x107f] (PCI address [0x1040-0x107f]) [ 1.507342] pci 0000:00:01.1: BAR 0: assigned [io 0x1080-0x109f] [ 1.507495] pci_update_resource: pci 0000:00:01.1: BAR 0: set to [io 0x1080-0x109f] (PCI address [0x1080-0x109f]) [ 1.507526] pci 0000:01:06.0: BAR 6: assigned [mem 0xd4180000-0xd419ffff pref] [ 1.507686] pci 0000:00:09.0: PCI bridge to [bus 01] [ 1.507835] pci 0000:00:09.0: bridge window [io 0x2000-0x2fff] [ 1.507987] pci 0000:00:09.0: bridge window [mem 0xd4100000-0xd41fffff] [ 1.508141] pci 0000:00:09.0: bridge window [mem 0xd8000000-0xdbffffff pref] [ 1.508296] pci 0000:00:0b.0: PCI bridge to [bus 02] [ 1.508448] pci 0000:00:0c.0: PCI bridge to [bus 03] [ 1.508601] pci 0000:00:0d.0: PCI bridge to [bus 05] [ 1.508755] pci 0000:0a:00.0: BAR 6: assigned [mem 0xd4300000-0xd43fffff pref] [ 1.508912] pci 0000:00:0e.0: PCI bridge to [bus 0a] [ 1.509061] pci 0000:00:0e.0: bridge window [io 0x3000-0x3fff] [ 1.509213] pci 0000:00:0e.0: bridge window [mem 0xd4200000-0xd42fffff] [ 1.509355] pci 0000:00:0e.0: bridge window [mem 0xd4300000-0xd43fffff pref] [ 1.509520] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.509523] pci_bus 0000:00: resource 5 [io 0x0d00-0x3fff] [ 1.509525] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.509528] pci_bus 0000:00: resource 7 [mem 0xd4000000-0xdbffffff] [ 1.509531] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 1.509534] pci_bus 0000:01: resource 1 [mem 0xd4100000-0xd41fffff] [ 1.509537] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdbffffff pref] [ 1.509539] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 1.509542] pci_bus 0000:01: resource 5 [io 0x0d00-0x3fff] [ 1.509544] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 1.509547] pci_bus 0000:01: resource 7 [mem 0xd4000000-0xdbffffff] [ 1.509550] pci_bus 0000:0a: resource 0 [io 0x3000-0x3fff] [ 1.509552] pci_bus 0000:0a: resource 1 [mem 0xd4200000-0xd42fffff] [ 1.509555] pci_bus 0000:0a: resource 2 [mem 0xd4300000-0xd43fffff pref] [ 1.509571] pci 0000:80:0b.0: PCI bridge to [bus 81-85] [ 1.509728] pci 0000:80:0c.0: PCI bridge to [bus 86-8a] [ 1.509888] pci 0000:80:0d.0: PCI bridge to [bus 8b-8f] [ 1.510043] pci 0000:80:0e.0: PCI bridge to [bus 90-94] [ 1.510197] pci_bus 0000:80: resource 4 [io 0xb000-0xffff] [ 1.510200] pci_bus 0000:80: resource 5 [mem 0x000a0000-0x000bffff] [ 1.510203] pci_bus 0000:80: resource 6 [mem 0xdc000000-0xdc3fffff] [ 1.510759] NET: Registered protocol family 2 [ 1.512341] TCP established hash table entries: 524288 (order: 10, 4194304 bytes) [ 1.515754] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.516687] TCP: Hash tables configured (established 524288 bind 65536) [ 1.516958] TCP: reno registered [ 1.517244] UDP hash table entries: 32768 (order: 8, 1048576 bytes) [ 1.518401] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes) [ 1.520069] NET: Registered protocol family 1 [ 1.520801] RPC: Registered named UNIX socket transport module. [ 1.520963] RPC: Registered udp transport module. [ 1.521110] RPC: Registered tcp transport module. [ 1.521257] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.521435] fixup_debug_start: pci 0000:00:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x27 [ 1.521462] fixup_debug_start: pci 0000:00:01.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x27 [ 1.521470] fixup_debug_start: pci 0000:00:01.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x27 [ 1.521479] fixup_debug_start: pci 0000:00:02.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x27 [ 1.521491] fixup_debug_start: pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x660 [ 1.521949] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23 [ 1.783723] fixup_debug_start: pci 0000:00:02.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x27 [ 1.783745] fixup_debug_start: pci 0000:00:02.1: calling quirk_usb_early_handoff+0x0/0x660 [ 1.784161] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 1.784489] fixup_debug_start: pci 0000:00:06.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x27 [ 1.784499] fixup_debug_start: pci 0000:00:07.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x27 [ 1.784508] fixup_debug_start: pci 0000:00:08.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x27 [ 1.784518] fixup_debug_start: pci 0000:00:09.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x27 [ 1.784526] fixup_debug_start: pci 0000:00:0a.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x27 [ 1.784535] fixup_debug_start: pci 0000:00:0b.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x27 [ 1.784599] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.784757] fixup_debug_start: pci 0000:00:0b.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x66 [ 1.784762] pci 0000:00:0b.0: Found disabled HT MSI Mapping [ 1.784912] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.785074] fixup_debug_start: pci 0000:00:0b.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x5d [ 1.785082] fixup_debug_start: pci 0000:00:0c.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x27 [ 1.785117] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.785272] fixup_debug_start: pci 0000:00:0c.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x66 [ 1.785281] pci 0000:00:0c.0: Found disabled HT MSI Mapping [ 1.785426] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.785585] fixup_debug_start: pci 0000:00:0c.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x5d [ 1.785592] fixup_debug_start: pci 0000:00:0d.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x27 [ 1.785630] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.785773] fixup_debug_start: pci 0000:00:0d.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x66 [ 1.785788] pci 0000:00:0d.0: Found disabled HT MSI Mapping [ 1.785946] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.786086] fixup_debug_start: pci 0000:00:0d.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x5d [ 1.786104] fixup_debug_start: pci 0000:00:0e.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x27 [ 1.786155] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.786308] fixup_debug_start: pci 0000:00:0e.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x66 [ 1.786313] pci 0000:00:0e.0: Found disabled HT MSI Mapping [ 1.786456] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 1.786607] fixup_debug_start: pci 0000:00:0e.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x5d [ 1.786627] fixup_debug_start: pci 0000:00:18.0: calling quirk_amd_nb_node+0x0/0x74 [ 1.786636] fixup_debug_start: pci 0000:00:18.1: calling quirk_amd_nb_node+0x0/0x74 [ 1.786644] fixup_debug_start: pci 0000:00:18.2: calling quirk_amd_nb_node+0x0/0x74 [ 1.786653] fixup_debug_start: pci 0000:00:18.3: calling quirk_amd_nb_node+0x0/0x74 [ 1.786660] fixup_debug_start: pci 0000:00:18.4: calling quirk_amd_nb_node+0x0/0x74 [ 1.786668] fixup_debug_start: pci 0000:00:19.0: calling quirk_amd_nb_node+0x0/0x74 [ 1.786676] fixup_debug_start: pci 0000:00:19.1: calling quirk_amd_nb_node+0x0/0x74 [ 1.786684] fixup_debug_start: pci 0000:00:19.2: calling quirk_amd_nb_node+0x0/0x74 [ 1.786692] fixup_debug_start: pci 0000:00:19.3: calling quirk_amd_nb_node+0x0/0x74 [ 1.786700] fixup_debug_start: pci 0000:00:19.4: calling quirk_amd_nb_node+0x0/0x74 [ 1.786708] fixup_debug_start: pci 0000:00:1a.0: calling quirk_amd_nb_node+0x0/0x74 [ 1.786716] fixup_debug_start: pci 0000:00:1a.1: calling quirk_amd_nb_node+0x0/0x74 [ 1.786724] fixup_debug_start: pci 0000:00:1a.2: calling quirk_amd_nb_node+0x0/0x74 [ 1.786732] fixup_debug_start: pci 0000:00:1a.3: calling quirk_amd_nb_node+0x0/0x74 [ 1.786740] fixup_debug_start: pci 0000:00:1a.4: calling quirk_amd_nb_node+0x0/0x74 [ 1.786748] fixup_debug_start: pci 0000:00:1b.0: calling quirk_amd_nb_node+0x0/0x74 [ 1.786756] fixup_debug_start: pci 0000:00:1b.1: calling quirk_amd_nb_node+0x0/0x74 [ 1.786764] fixup_debug_start: pci 0000:00:1b.2: calling quirk_amd_nb_node+0x0/0x74 [ 1.786772] fixup_debug_start: pci 0000:00:1b.3: calling quirk_amd_nb_node+0x0/0x74 [ 1.786780] fixup_debug_start: pci 0000:00:1b.4: calling quirk_amd_nb_node+0x0/0x74 [ 1.786788] fixup_debug_start: pci 0000:00:1c.0: calling quirk_amd_nb_node+0x0/0x74 [ 1.786796] fixup_debug_start: pci 0000:00:1c.1: calling quirk_amd_nb_node+0x0/0x74 [ 1.786805] fixup_debug_start: pci 0000:00:1c.2: calling quirk_amd_nb_node+0x0/0x74 [ 1.786813] fixup_debug_start: pci 0000:00:1c.3: calling quirk_amd_nb_node+0x0/0x74 [ 1.786821] fixup_debug_start: pci 0000:00:1c.4: calling quirk_amd_nb_node+0x0/0x74 [ 1.786829] fixup_debug_start: pci 0000:00:1d.0: calling quirk_amd_nb_node+0x0/0x74 [ 1.786838] fixup_debug_start: pci 0000:00:1d.1: calling quirk_amd_nb_node+0x0/0x74 [ 1.786846] fixup_debug_start: pci 0000:00:1d.2: calling quirk_amd_nb_node+0x0/0x74 [ 1.786855] fixup_debug_start: pci 0000:00:1d.3: calling quirk_amd_nb_node+0x0/0x74 [ 1.786863] fixup_debug_start: pci 0000:00:1d.4: calling quirk_amd_nb_node+0x0/0x74 [ 1.786871] fixup_debug_start: pci 0000:00:1e.0: calling quirk_amd_nb_node+0x0/0x74 [ 1.786880] fixup_debug_start: pci 0000:00:1e.1: calling quirk_amd_nb_node+0x0/0x74 [ 1.786888] fixup_debug_start: pci 0000:00:1e.2: calling quirk_amd_nb_node+0x0/0x74 [ 1.786897] fixup_debug_start: pci 0000:00:1e.3: calling quirk_amd_nb_node+0x0/0x74 [ 1.786905] fixup_debug_start: pci 0000:00:1e.4: calling quirk_amd_nb_node+0x0/0x74 [ 1.786914] fixup_debug_start: pci 0000:00:1f.0: calling quirk_amd_nb_node+0x0/0x74 [ 1.786922] fixup_debug_start: pci 0000:00:1f.1: calling quirk_amd_nb_node+0x0/0x74 [ 1.786931] fixup_debug_start: pci 0000:00:1f.2: calling quirk_amd_nb_node+0x0/0x74 [ 1.786939] fixup_debug_start: pci 0000:00:1f.3: calling quirk_amd_nb_node+0x0/0x74 [ 1.786948] fixup_debug_start: pci 0000:00:1f.4: calling quirk_amd_nb_node+0x0/0x74 [ 1.786958] fixup_debug_start: pci 0000:01:06.0: calling quirk_e100_interrupt+0x0/0x143 [ 1.786972] fixup_debug_start: pci 0000:01:09.0: calling pci_fixup_video+0x0/0xa6 [ 1.786977] pci 0000:01:09.0: Boot video device [ 1.786988] fixup_debug_start: pci 0000:80:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x27 [ 1.787014] fixup_debug_start: pci 0000:80:01.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x27 [ 1.787023] fixup_debug_start: pci 0000:80:07.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x27 [ 1.787032] fixup_debug_start: pci 0000:80:08.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x27 [ 1.787042] fixup_debug_start: pci 0000:80:0a.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x27 [ 1.787052] fixup_debug_start: pci 0000:80:0b.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x27 [ 1.787102] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 1.787265] fixup_debug_start: pci 0000:80:0b.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x66 [ 1.787270] pci 0000:80:0b.0: Found disabled HT MSI Mapping [ 1.787628] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 1.787780] fixup_debug_start: pci 0000:80:0b.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x5d [ 1.787789] fixup_debug_start: pci 0000:80:0c.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x27 [ 1.787825] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 1.787983] fixup_debug_start: pci 0000:80:0c.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x66 [ 1.787998] pci 0000:80:0c.0: Found disabled HT MSI Mapping [ 1.788146] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 1.788297] fixup_debug_start: pci 0000:80:0c.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x5d [ 1.788314] fixup_debug_start: pci 0000:80:0d.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x27 [ 1.788351] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 1.788512] fixup_debug_start: pci 0000:80:0d.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x66 [ 1.788522] pci 0000:80:0d.0: Found disabled HT MSI Mapping [ 1.788677] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 1.788826] fixup_debug_start: pci 0000:80:0d.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x5d [ 1.788833] fixup_debug_start: pci 0000:80:0e.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x27 [ 1.788875] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 1.789039] fixup_debug_start: pci 0000:80:0e.0: calling quirk_nvidia_ck804_msi_ht_cap+0x0/0x66 [ 1.789044] pci 0000:80:0e.0: Found disabled HT MSI Mapping [ 1.789193] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 1.789352] fixup_debug_start: pci 0000:80:0e.0: calling quirk_nvidia_ck804_pcie_aer_ext_cap+0x0/0x5d [ 1.789356] PCI: CLS 64 bytes, default 64 [ 1.792583] PCI-DMA: Disabling AGP. [ 1.794090] PCI-DMA: aperture base @ d0000000 size 65536 KB [ 1.794243] init_memory_mapping: [mem 0xd0000000-0xd3ffffff] [ 1.794393] [mem 0xd0000000-0xd3ffffff] page 2M [ 1.794408] PCI-DMA: using GART IOMMU. [ 1.794558] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.804131] Simple Boot Flag at 0x37 set to 0x80 [ 1.807113] LVT offset 1 assigned for vector 0x400 [ 1.807331] IBS: LVT offset 1 assigned [ 1.807794] perf: AMD IBS detected (0x00000007) [ 1.818106] futex hash table entries: 8192 (order: 7, 524288 bytes) [ 1.855700] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.860055] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.860511] msgmni has been set to 32768 [ 1.861228] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 1.861394] io scheduler noop registered [ 1.861549] io scheduler deadline registered [ 1.861873] io scheduler cfq registered (default) [ 1.862511] __pci_set_master: pcieport 0000:00:0b.0: enabling bus mastering [ 1.862559] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X [ 1.862775] __pci_set_master: pcieport 0000:00:0c.0: enabling bus mastering [ 1.862829] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X [ 1.863108] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X [ 1.863269] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X [ 1.863653] __pci_set_master: pcieport 0000:80:0b.0: enabling bus mastering [ 1.863706] pcieport 0000:80:0b.0: irq 44 for MSI/MSI-X [ 1.863882] __pci_set_master: pcieport 0000:80:0c.0: enabling bus mastering [ 1.863902] pcieport 0000:80:0c.0: irq 45 for MSI/MSI-X [ 1.864038] pcieport 0000:80:0d.0: irq 46 for MSI/MSI-X [ 1.864194] pcieport 0000:80:0e.0: irq 47 for MSI/MSI-X [ 1.907648] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.928268] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.948884] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.950732] Linux agpgart interface v0.103 [ 1.951250] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.951442] ACPI: Power Button [PWRB] [ 1.951955] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.952116] ACPI: Power Button [PWRF] [ 1.952497] ACPI: acpi_idle registered with cpuidle [ 1.957370] Floppy drive(s): fd0 is 1.44M [ 1.961453] brd: module loaded [ 1.963955] loop: module loaded [ 1.965077] sata_nv 0000:00:07.0: version 3.5 [ 1.965580] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21 [ 1.966666] scsi0 : sata_nv [ 1.967285] scsi1 : sata_nv [ 1.967781] ata1: SATA max UDMA/133 cmd 0x1440 ctl 0x1434 bmdma 0x1410 irq 21 [ 1.967936] ata2: SATA max UDMA/133 cmd 0x1438 ctl 0x1430 bmdma 0x1418 irq 21 [ 1.968454] ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 20 [ 1.969691] scsi2 : sata_nv [ 1.970145] scsi3 : sata_nv [ 1.970492] ata3: SATA max UDMA/133 cmd 0x1458 ctl 0x144c bmdma 0x1420 irq 20 [ 1.970645] ata4: SATA max UDMA/133 cmd 0x1450 ctl 0x1448 bmdma 0x1428 irq 20 [ 1.971197] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 19 [ 1.972448] scsi4 : sata_nv [ 1.972875] scsi5 : sata_nv [ 1.973172] ata5: SATA max UDMA/133 cmd 0xb030 ctl 0xb024 bmdma 0xb000 irq 19 [ 1.973341] ata6: SATA max UDMA/133 cmd 0xb028 ctl 0xb020 bmdma 0xb008 irq 19 [ 1.973723] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 18 [ 1.974669] scsi6 : sata_nv [ 1.975223] scsi7 : sata_nv [ 1.975774] FDC 0 is a post-1991 82077 [ 1.975919] ata7: SATA max UDMA/133 cmd 0xb048 ctl 0xb03c bmdma 0xb010 irq 18 [ 1.976096] ata8: SATA max UDMA/133 cmd 0xb040 ctl 0xb038 bmdma 0xb018 irq 18 [ 1.976430] pata_amd 0000:00:06.0: version 0.4.1 [ 1.978144] scsi8 : pata_amd [ 1.978596] scsi9 : pata_amd [ 1.978901] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1400 irq 14 [ 1.979044] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1408 irq 15 [ 1.979454] tun: Universal TUN/TAP device driver, 1.6 [ 1.979783] tun: (C) 1999-2004 Max Krasnyansky [ 1.980316] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.980474] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.436214] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.436222] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.440209] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.444219] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.444832] ata3.00: ATA-8: ST31000340NS, SN05, max UDMA/133 [ 2.444837] ata1.00: ATA-8: ST31000340NS, SN05, max UDMA/133 [ 2.444841] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.445357] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.448836] ata5.00: ATA-8: ST31000340NS, SN05, max UDMA/133 [ 2.449045] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.452738] ata7.00: ATA-8: ST31000340NS, SN05, max UDMA/133 [ 2.452899] ata7.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.460779] ata3.00: configured for UDMA/133 [ 2.460782] ata1.00: configured for UDMA/133 [ 2.461054] scsi 0:0:0:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5 [ 2.461469] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.461834] sd 0:0:0:0: [sda] Write Protect is off [ 2.461855] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.462202] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.462275] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.462748] e1000 0000:01:06.0 eth0: (PCI:33MHz:32-bit) 00:e0:81:b0:4d:69 [ 2.462904] e1000 0000:01:06.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.463190] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 2.463689] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23 [ 2.464779] ata5.00: configured for UDMA/133 [ 2.468755] ata7.00: configured for UDMA/133 [ 2.469921] sda: sda1 sda2 sda3 [ 2.470860] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.804577] tsc: Refined TSC clocksource calibration: 1908.795 MHz [ 2.928699] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.937203] ata2.00: ATA-6: ST31000340NS, SN04, max UDMA/133 [ 2.937356] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.957250] ata2.00: configured for UDMA/133 [ 2.957531] scsi 1:0:0:0: Direct-Access ATA ST31000340NS SN04 PQ: 0 ANSI: 5 [ 2.958119] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.958241] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.958515] scsi 2:0:0:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5 [ 2.958567] sd 1:0:0:0: [sdb] Write Protect is off [ 2.958570] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.958627] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.959396] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.959561] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.959680] sd 2:0:0:0: [sdc] Write Protect is off [ 2.959683] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.959757] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.974005] sdc: unknown partition table [ 2.974638] sd 2:0:0:0: [sdc] Attached SCSI disk [ 2.982377] sdb: unknown partition table [ 2.982979] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.989477] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:e0:81:b0:4d:67 [ 2.989670] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 [ 2.990090] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 17 [ 3.425192] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.433734] ata4.00: ATA-8: ST31000340NS, SN05, max UDMA/133 [ 3.433885] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.449766] ata4.00: configured for UDMA/133 [ 3.450071] scsi 3:0:0:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5 [ 3.450615] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.450715] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 3.451049] sd 3:0:0:0: [sdd] Write Protect is off [ 3.451108] scsi 4:0:0:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5 [ 3.451342] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.451401] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.451587] sd 4:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.451630] sd 4:0:0:0: [sde] Write Protect is off [ 3.451633] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 3.451652] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.451720] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 3.464721] sde: sde1 sde2 sde3 [ 3.465803] sd 4:0:0:0: [sde] Attached SCSI disk [ 3.471109] sdd: unknown partition table [ 3.471579] sd 3:0:0:0: [sdd] Attached SCSI disk [ 3.513925] forcedeth 0000:80:0a.0: ifname eth2, PHY OUI 0x5043 @ 1, addr 00:e0:81:b0:4d:68 [ 3.514158] forcedeth 0000:80:0a.0: highdma csum gbit lnktim desc-v3 [ 3.514919] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.515112] ehci-pci: EHCI PCI platform driver [ 3.515377] __pci_set_master: ehci-pci 0000:00:02.1: enabling bus mastering [ 3.515426] ehci-pci 0000:00:02.1: EHCI Host Controller [ 3.515719] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 3.515884] ehci-pci 0000:00:02.1: debug port 1 [ 3.516085] ehci-pci 0000:00:02.1: cache line size of 64 is not supported [ 3.516124] ehci-pci 0000:00:02.1: irq 22, io mem 0xd4001000 [ 3.525289] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 3.526140] hub 1-0:1.0: USB hub found [ 3.526314] hub 1-0:1.0: 10 ports detected [ 3.527150] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.527311] ohci-pci: OHCI PCI platform driver [ 3.527585] __pci_set_master: ohci-pci 0000:00:02.0: enabling bus mastering [ 3.527590] ohci-pci 0000:00:02.0: OHCI PCI host controller [ 3.527882] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 3.528111] ohci-pci 0000:00:02.0: irq 23, io mem 0xd4000000 [ 3.583776] hub 2-0:1.0: USB hub found [ 3.583935] hub 2-0:1.0: 10 ports detected [ 3.584416] uhci_hcd: USB Universal Host Controller Interface driver [ 3.584864] usbcore: registered new interface driver usblp [ 3.585112] usbcore: registered new interface driver usb-storage [ 3.585635] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.588680] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.588866] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.589556] mousedev: PS/2 mouse device common for all mice [ 3.590718] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 3.592119] usbcore: registered new interface driver usbhid [ 3.592259] usbhid: USB HID core driver [ 3.592503] oprofile: AMD IBS detected (0x00000007) [ 3.592653] oprofile: using NMI interrupt. [ 3.592832] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3.593774] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.594029] arp_tables: (C) 2002 David S. Miller [ 3.594183] TCP: cubic registered [ 3.594333] NET: Registered protocol family 17 [ 3.598896] registered taskstats version 1 [ 3.600053] console [netcon0] enabled [ 3.600201] netconsole: network logging started [ 3.600783] acpi-cpufreq: overriding BIOS provided _PSD data [ 3.651880] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 3.805792] Switched to clocksource tsc [ 3.917525] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.926109] ata6.00: ATA-8: ST31000340NS, SN05, max UDMA/133 [ 3.926269] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.942129] ata6.00: configured for UDMA/133 [ 3.942491] scsi 5:0:0:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5 [ 3.943013] sd 5:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.943184] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 3.943301] sd 5:0:0:0: [sdf] Write Protect is off [ 3.943304] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 3.943356] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.943998] scsi 6:0:0:0: Direct-Access ATA ST31000340NS SN05 PQ: 0 ANSI: 5 [ 3.944534] sd 6:0:0:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.944671] sd 6:0:0:0: Attached scsi generic sg6 type 0 [ 3.944974] sd 6:0:0:0: [sdg] Write Protect is off [ 3.945168] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 3.945219] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.964285] sdf: sdf1 sdf2 sdf3 [ 3.965186] sd 5:0:0:0: [sdf] Attached SCSI disk [ 3.967335] sdg: unknown partition table [ 3.967855] sd 6:0:0:0: [sdg] Attached SCSI disk [ 4.201833] usb 2-1: new low-speed USB device number 2 using ohci-pci [ 4.219974] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4 [ 4.410030] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.434324] ata8.00: ATA-7: Hitachi HUA721010KLA330, GKAOA70M, max UDMA/133 [ 4.434477] ata8.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 4.450330] ata8.00: configured for UDMA/133 [ 4.450605] scsi 7:0:0:0: Direct-Access ATA Hitachi HUA72101 GKAO PQ: 0 ANSI: 5 [ 4.451128] sd 7:0:0:0: [sdh] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.451282] sd 7:0:0:0: Attached scsi generic sg7 type 0 [ 4.451499] sd 7:0:0:0: [sdh] Write Protect is off [ 4.451686] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00 [ 4.451712] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.465417] sdh: unknown partition table [ 4.465827] sd 7:0:0:0: [sdh] Attached SCSI disk [ 4.638580] ata10.00: ATAPI: TEAC DV-516GB, HT13, max UDMA/33 [ 4.638790] ata10: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000) ACPI=0x701f (60:600:0x13) [ 4.678538] ata10.00: configured for UDMA/33 [ 4.680623] scsi 9:0:0:0: CD-ROM TEAC DV-516GB HT13 PQ: 0 ANSI: 5 [ 4.687617] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 4.687765] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.688183] sr 9:0:0:0: Attached scsi CD-ROM sr0 [ 4.688400] sr 9:0:0:0: Attached scsi generic sg8 type 5 [ 4.697728] EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240) [ 4.706048] EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240) [ 4.727325] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.727484] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [ 4.744410] devtmpfs: mounted [ 4.745635] Freeing unused kernel memory: 932K (ffffffff81760000 - ffffffff81849000) [ 5.666481] random: nonblocking pool is initialized [ 5.901696] hid-generic 0003:051D:0002.0001: device has no listeners, quitting [ 6.381042] systemd-udevd[1977]: starting version 216 [ 6.831701] kvm: Nested Virtualization enabled [ 6.831727] kvm: Nested Paging enabled [ 6.833157] systemd-udevd[2065]: renamed network interface eth1 to enp0s10 [ 6.848841] Fusion MPT base driver 3.04.20 [ 6.848847] Copyright (c) 1999-2008 LSI Corporation [ 6.868611] systemd-udevd[2004]: renamed network interface eth2 to enp128s10 [ 6.870183] Fusion MPT FC Host driver 3.04.20 [ 6.870572] mptbase: ioc0: Initiating bringup [ 6.916601] systemd-udevd[2011]: renamed network interface eth0 to enp1s6 [ 7.441048] ioc0: LSIFC949E: Capabilities={Initiator,Target,LAN} [ 8.434532] scsi10 : ioc0: LSIFC949E, FwRev=01031400h, Ports=1, MaxQ=1023, IRQ=17 [ 8.435153] mptfc: ioc0: FC Link Established, Speed = 4 Gbps [ 8.435973] scsi 10:0:0:0: Direct-Access ES-6600S Backup R001 PQ: 0 ANSI: 5 [ 8.436292] sd 10:0:0:0: Attached scsi generic sg9 type 0 [ 8.436303] sd 10:0:0:0: [sdi] 3906249216 512-byte logical blocks: (1.99 TB/1.81 TiB) [ 8.436541] sd 10:0:0:0: [sdi] Write Protect is off [ 8.436546] sd 10:0:0:0: [sdi] Mode Sense: bf 00 00 08 [ 8.436659] sd 10:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.436704] scsi 10:0:0:1: Direct-Access ES-6600S Data R001 PQ: 0 ANSI: 5 [ 8.436720] mptscsih: ioc0: [10:0:0:0] FCP_ResponseInfo=02000000h [ 8.437110] sd 10:0:0:1: [sdj] 15624996864 512-byte logical blocks: (7.99 TB/7.27 TiB) [ 8.437163] sd 10:0:0:1: Attached scsi generic sg10 type 0 [ 8.437324] sd 10:0:0:1: [sdj] Write Protect is off [ 8.437328] sd 10:0:0:1: [sdj] Mode Sense: bf 00 00 08 [ 8.437449] sd 10:0:0:1: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.437493] scsi 10:0:0:2: Direct-Access ES-6600S Systems R001 PQ: 0 ANSI: 5 [ 8.437506] mptscsih: ioc0: [10:0:0:1] FCP_ResponseInfo=02000000h [ 8.437841] sdi: sdi1 [ 8.437974] sd 10:0:0:2: [sdk] 7812498432 512-byte logical blocks: (3.99 TB/3.63 TiB) [ 8.438205] sd 10:0:0:2: [sdk] Write Protect is off [ 8.438208] sd 10:0:0:2: [sdk] Mode Sense: bf 00 00 08 [ 8.438223] sd 10:0:0:2: Attached scsi generic sg11 type 0 [ 8.438329] sd 10:0:0:2: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.438395] mptscsih: ioc0: [10:0:0:2] FCP_ResponseInfo=02000000h [ 8.438545] sdj: unknown partition table [ 8.439072] sd 10:0:0:0: [sdi] Attached SCSI disk [ 8.439644] sd 10:0:0:1: [sdj] Attached SCSI disk [ 8.439706] sdk: unknown partition table [ 8.440417] sd 10:0:0:2: [sdk] Attached SCSI disk [ 9.131267] EXT4-fs (sda2): re-mounted. Opts: (null) [ 11.076719] end_request: I/O error, dev fd0, sector 0 [ 11.076728] floppy: error -5 while reading block 0 [ 11.100725] end_request: I/O error, dev fd0, sector 0 [ 11.100736] floppy: error -5 while reading block 0 [ 11.278014] bio: create slab at 1 [ 12.073679] Bridge firewalling registered [ 12.096561] device enp1s6 entered promiscuous mode [ 12.106868] device br0 entered promiscuous mode [ 12.119426] e1000: enp1s6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 12.119556] br0: port 1(enp1s6) entered forwarding state [ 12.119575] br0: port 1(enp1s6) entered forwarding state