| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 07 Oct 2014 16:49:26 -0700
From: James Bottomley <James.Bottomley@...senPartnership.com>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-scsi <linux-scsi@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: [GIT PULL] First round of SCSI updates for the 3.16+ merge window
This patch set consists of the usual driver updates (megaraid_sas,
arcmsr, be2iscsi, lpfc, mpt2sas, mpt3sas, qla2xxx, ufs) plus several
assorted fixes and miscellaneous updates (including the
pci_msix_enable_range() changes that have been pending for a while).
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-for-linus
The short changelog is:
Adam Radford (5):
megaraid_sas: Version and Changelog update
megaraid_sas: Fix reset_mutex leak
megaraid_sas: Remove unused variables in megasas_instance
megaraid_sas: Add missing initial call to megasas_get_ld_vf_affiliation().
megaraid_sas: Fix LD/VF affiliation parsing
Alan Stern (1):
scsi: don't store LUN bits in CDB[1] for USB mass-storage devices
Alex Vechersky (1):
qla2xxx: Add missing ISP27xx checks to optrom code.
Alexander Gordeev (13):
lpfc: Use pci_enable_msix_range() instead of pci_enable_msix()
pmcraid: Use pci_enable_msix_range() instead of pci_enable_msix()
pmcraid: Get rid of a redundant assignment
csiostor: Use pci_enable_msix_range() instead of pci_enable_msix()
csiostor: Remove superfluous call to pci_disable_msix()
be2iscsi: Use pci_enable_msix_range()
qla2xxx: Use pci_enable_msix_range() instead of pci_enable_msix()
mpt3sas: Use pci_enable_msix_exact() instead of pci_enable_msix()
mpt2sas: Use pci_enable_msix_exact() instead of pci_enable_msix()
megaraid: Use pci_enable_msix_range() instead of pci_enable_msix()
megaraid: Fail resume if MSI-X re-initialization failed
hpsa: Use pci_enable_msix_range() instead of pci_enable_msix()
hpsa: Fallback to MSI rather than to INTx if MSI-X failed
Andreea-Cristina Bernat (1):
libfc: Replace rcu_assign_pointer() with RCU_INIT_POINTER()
Anish Bhatt (1):
cxgb4i: avoid holding mutex in interrupt context
Arun Easi (7):
qla2xxx: Host reset handling in ABTS path.
qla2xxx: Handle chip reset in target mode.
qla2xxx: Add Host reset handling in target mode.
qla2xxx: Enable SLER conditionally in target mode.
qla2xxx: Remove verbose messages in target mode.
qla2xxx: Use correct offset to req-q-out for reserve calculation
qla2xxx: Unload of qla2xxx driver crashes the machine.
Chad Dupuis (9):
qla2xxx: Fail adapter initialization on load ram failure.
qla2xxx: Disable PCI device in shutdown handler.
qla2xxx: Mark port lost when we receive an RSCN for it.
qla2xxx: Honor FCP_RSP retry delay timer field.
qla2xxx: Force use of mailbox interface for flash access commands for ISP27xx.
qla2xxx: Enable fast flash access for ISP83xx.
bnx2fc: fix incorrect DMA memory mapping in bnx2fc_unmap_sg_list()
qla2xxx: Remove restriction on starting remote device discovery on port update.
qla2xxx: Move mailbox failure messages to a default debug level.
Ching Huang (19):
arcmsr: simplify ioctl data read/write
arcmsr: simplify of updating doneq_index and postq_index
arcmsr: call scsi_scan_host at the end of host initialization
arcmsr: add support new adapter ARC12x4 series
arcmsr: modify some character strings
arcmsr: fix sparse warnings and errors
arcmsr: fix ioctl data read/write error for adapter type C
arcmsr: revise allocation of second dma_coherent_handle for type B
arcmsr: rename functions and variables
arcmsr: clear outbound doorbell buffer completely
arcmsr: modify printing adapter model number and F/W messages
arcmsr: remove calling arcmsr_hbb_enable_driver_mode
arcmsr: revise message_isr_bh_fn to remove duplicate code
arcmsr: store adapter type in PCI id table
arcmsr: return status of abort command
arcmsr: limit max. number of SCSI command request
arcmsr: add code to support hibernation
arcmsr: add code to support MSI-X and MSI interrupt
arcmsr: fix command timeout under heavy load
Chris J Arges (1):
mptfusion: enable no_write_same for vmware scsi disks
Chris Leech (1):
fcoe: extend ethtool to FC port speed mapping
Christoph Hellwig (4):
scsi: add a CONFIG_SCSI_MQ_DEFAULT option
ipr: fix compile failure
eata: remove driver_lock
scsi: fix regression that accidentally disabled block-based tcq
Daniel Borkmann (1):
lpfc: do not feed jiffies as random seed from lpfc driver
Dolev Raviv (2):
ufs: definitions for phy interface
ufs: refactor configuring power mode
Douglas Gilbert (4):
scsi_debug: deadlock between completions and surprise module removal
scsi_debug: bump inquiry version to SPC-4, update version descriptors
scsi_debug: give unit attention and other errors precedence over TSF
scsi_debug: scsi_cmnd->cmnd check and casts unnecessary
Hans Wennborg (1):
scsi: fix decimal printf format specifiers prefixed with 0x
Himanshu Madhani (12):
qla2xxx: Add memory barrier before ringing doorbell.
qla2xxx: Do not send SS_RESIDUAL_UNDER with SAM_STAT_BUSY
qla2xxx: fix crash due to task mgmt cmd type
qla2xxx: Increase room in request queue for sending priority packets
qla2xxx: fix kernel NULL pointer access
qla2xxx: Fix sparse warnings in tcm_qla2xxx.c
qla2xxx: Restore WWPN in case of Loop Dead.
qla2xxx: Disable laser for ISP2031 while unloading driver.
qla2xxx: Enable diagnostic port using NVRAM parameters.
qla2xxx: Allow user to change ql2xfdmienable value.
qla2xxx: Fix driver version string message.
qla2xxx: Add FDMI-2 functionality.
Hiral Shah (1):
fnic: assign FIP_ALL_FCF_MACS to fcoe_all_fcfs
James Smart (10):
lpfc: update lpfc version to driver version 10.4.8000.0
lpfc: fix for handling unmapped ndlp in target reset handler
lpfc: fix low priority issues from fortify source code scan
lpfc: fix high priority issues from fortify source code scan
lpfc: fix crash from page fault caused by use after rport delete
lpfc: fix locking issues with abort data paths
lpfc: fix race between LOGO/PLOGI handling causing NULL pointer
lpfc: fix IP Reset processing - wait for RDY before proceeding
lpfc: fix quarantined XRI recovery qualifier state in link bounce
lpfc: fix discovery timeout during nameserver login
Jan Kulich (1):
qla2xxx: ISPFx00 unexpected resets during adapter boot sequence.
Jayamohan Kallickal (5):
be2iscsi: Bump the driver version
be2iscsi: Fix processing CQE before connection resources are freed
be2iscsi: Fix updating the boot enteries in sysfs
be2iscsi: Fix the copyright year
be2iscsi: Fix the sparse warning introduced in previous submission
Joe Carnuccio (15):
qla2xxx: Fix sparse warning in qla_iocb.c file.
qla2xxx: Add diagnostic port functionality.
qla2xxx: Add FA-WWN functionality.
qla2xxx: Incorrect linked list semantic in qlafx00_get_fcport().
qla2xxx: Incorrect debug level on mailbox command print 0x1111.
qla2xxx: ISPFX00 avoid writing semaphore register in request_irqs().
qla2xxx: Fix potential return count bug in qla2xxx_get_vpd_field().
qla2xxx: ISP27xx fwdump template error print simplification.
qla2xxx: ISP25xx multiqueue shadow register crash fix.
qla2xxx: Add endianizer to max_payload_size modifier.
qla2xxx: Add ISP27xx fwdump template entry T275 (insert buffer).
qla2xxx: ISP27xx fwdump template fix insertbuf() routine.
qla2xxx: ISP27xx fwdump template remove high frequency debug logs.
qla2xxx: ISP27xx optimize fwdump entry table lookup.
qla2xxx: ISP27xx add tests for incomplete template.
Joe Lawrence (6):
qla2xxx: Prevent probe and board_disable race
qla2xxx: Prevent removal and board_disable race
qla2xxx: Schedule board_disable only once
qla2xxx: Collect PCI register checks and board_disable scheduling
qla2xxx: Use qla2x00_clear_drv_active on probe failure
qla2xxx: Fix shost use-after-free on device removal
Joe Perches (1):
lpfc: use dma_zalloc_coherent
John Soni Jose (2):
be2iscsi : Bump the driver version
be2iscsi : Fix kernel panic during reboot/shutdown
K. Y. Srinivasan (1):
storvsc: get rid of overly verbose warning messages
Kashyap.Desai@...gotech.com (1):
scsi: add use_cmd_list flag
Manuel Schölling (1):
lpfc: use time_after()
Mike Christie (3):
be2iscsi: check ip buffer before copying
iscsi_tcp: export port being used
libiscsi: fix potential buffer overrun in __iscsi_conn_send_pdu
Nigel Kirkland (1):
qla2xxx: Free sysfs attributes for ISP27xx.
Quinn Tran (3):
qla2xxx: Fix hang due to cmd_kref not decrementing
qla2xxx: Add support for QFull throttling and Term Exchange retry
qla2xxx: Declaration error cause stack corruption.
Randy Dunlap (2):
fusion: fix excess parameter kernel-doc warning
scsi: fix various kernel-doc problems in scsi_error.c
Rashika Kheria (5):
lpfc: mark function as static in lpfc/lpfc_bsg.c
lpfc: mark functions as static in lpfc/lpfc_scsi.c
lpfc: mark functions as static in lpfc/lpfc_init.c
lpfc: mark functions as static in lpfc/lpfc_hbadisc.c
lpfc: mark functions as static in lpfc/lpfc_sli.c
Rasmus Villemoes (1):
mptfusion: simplify rounding
Raviv Shvili (1):
ufs: add voting support for host controller power
Sahitya Tummala (3):
ufs: Add support for clock scaling using devfreq framework
ufs: Add freq-table-hz property for UFS device
ufs: Add support for clock gating
Saurav Kashyap (4):
qla2xxx: Add flags for tracing the target commands.
qla2xxx: Increase the request queue size to 8K for ISP2031
qla2xxx: Add counter for message
qla2xxx: Update the driver version to 8.07.00.16-k.
Sawan Chandak (2):
qla2xxx: Move warning message to debug level.
qla2xxx: Add fix in driver unload for pending activity.
Sebastian Herbszt (1):
scsi: fix comment in struct Scsi_Host definition
Sreekanth Reddy (19):
mpt2sas: fix undefined reference to `__udivdi3' compilation errors
mpt3sas, mpt2sas: fix scsi_add_host error handling problems in _scsih_probe
mpt3sas: Bump mpt3sas driver version to 04.100.00.00
mpt3sas: Added Reply Descriptor Post Queue (RDPQ) Array support
mpt3sas: Added OEM branding Strings
mpt3sas: Copyright in driver sources is updated for year the 2014.
mpt3sas: MPI2.5 Rev H (2.5.3) specifications
mpt3sas: Bump mpt3sas driver version to 03.100.00.00
mpt3sas: Clear PFA Status on SGPIO when PFA Drive is Removed or Replaced
mpt3sas: MPI2.5 Rev G (2.5.2) specifications
mpt2sas: Bump mpt2sas driver version to 18.100.00.00
mpt2sas: Get IOC_FACTS information using handshake protocol only after HBA card gets into READY or Operational state.
mpt2sas: Added Reply Descriptor Post Queue (RDPQ) Array support
mpt2sas: Avoid type casting for direct I/O commands
mpt2sas: Bump mpt2sas driver version to 17.100.00.00
mpt2sas: Clear PFA Status on SGPIO when PFA Drive is Removed or Replaced
mpt2sas: Copyright in driver sources is updated for year the 2014
mpt2sas: MPI2 Rev Y (2.00.17) and Rev Z (2.00.18) specifications
mpt2sas: Added driver module parameter max_msix_vectors
Subhash Jadavani (8):
ufs: tune bkops while power managment events
ufs: add UFS power management support
ufs: introduce well known logical unit in ufs
ufs: manually add well known logical units
ufs: refactor query descriptor API support
scsi: don't add scsi_device if its already visible
scsi: fix the type for well known LUs
scsi: balance out autopm get/put calls in scsi_sysfs_add_sdev()
Sujit Reddy Thumma (5):
ufs: improve init sequence
ufs: Add clock initialization support
ufs: Add regulator enable support
ufs: Allow vendor specific initialization
sd: Avoid sending medium write commands if device is write protected
Sumit.Saxena@...gotech.com (11):
megaraid_sas : Driver version update
megaraid_sas : MFI MPT linked list corruption fix
megaraid_sas : N-drive primary raid level 1 load balancing
megaraid_sas : Add module parameter to disable IRQ-CPU affinity hint
megaraid_sas : Round down max sge supported by controller to power of two
megaraid_sas : Host lock less mode to enabled asynchronous IO submission
megaraid_sas : Extended VD support
megaraid_sas : Firmware crash dump feature support
megaraid_sas : Update threshold based reply post host index register
megaraid_sas : Use writeq for 64bit pci write to avoid spinlock overhead
megaraid_sas : Do not scan non syspd drives
Suresh Thiagarajan (1):
pm8001: Update nvmd response data to request buffer
Tej Parkash (1):
bnx2i: Make boot_nic entry visible in the sysfs session objects
Tomas Henzl (2):
hpsa: add missing pci_set_master in kdump path
hpsa: refine the pci enable/disable handling
Yaniv Gardi (1):
ufs: Active Power Mode - configuring bActiveICCLevel
wenxiong@...ux.vnet.ibm.com (1):
ipr: don't log error messages when applications issues illegal requests
And the diffstat:
.../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 41 +
Documentation/scsi/ChangeLog.megaraid_sas | 14 +
drivers/message/fusion/mptbase.c | 8 +-
drivers/message/fusion/mptctl.c | 7 +-
drivers/message/fusion/mptspi.c | 5 +
drivers/scsi/Kconfig | 11 +
drivers/scsi/aacraid/linit.c | 1 +
drivers/scsi/arcmsr/arcmsr.h | 146 +-
drivers/scsi/arcmsr/arcmsr_attr.c | 120 +-
drivers/scsi/arcmsr/arcmsr_hba.c | 2326 ++++++++++++------
drivers/scsi/be2iscsi/be.h | 2 +-
drivers/scsi/be2iscsi/be_cmds.c | 40 +-
drivers/scsi/be2iscsi/be_cmds.h | 24 +-
drivers/scsi/be2iscsi/be_iscsi.c | 31 +-
drivers/scsi/be2iscsi/be_iscsi.h | 2 +-
drivers/scsi/be2iscsi/be_main.c | 42 +-
drivers/scsi/be2iscsi/be_main.h | 8 +-
drivers/scsi/be2iscsi/be_mgmt.c | 15 +-
drivers/scsi/be2iscsi/be_mgmt.h | 2 +-
drivers/scsi/bnx2fc/bnx2fc_io.c | 15 +-
drivers/scsi/bnx2i/bnx2i_iscsi.c | 3 +
drivers/scsi/csiostor/csio_hw.h | 2 +-
drivers/scsi/csiostor/csio_isr.c | 24 +-
drivers/scsi/cxgbi/cxgb4i/cxgb4i.c | 2 +-
drivers/scsi/cxgbi/libcxgbi.c | 59 +-
drivers/scsi/cxgbi/libcxgbi.h | 3 +
drivers/scsi/dpt_i2o.c | 1 +
drivers/scsi/eata.c | 9 -
drivers/scsi/fcoe/fcoe_transport.c | 39 +-
drivers/scsi/fnic/fnic.h | 2 +-
drivers/scsi/fnic/fnic_fcs.c | 5 +-
drivers/scsi/fnic/fnic_trace.c | 5 +-
drivers/scsi/hpsa.c | 70 +-
drivers/scsi/ipr.c | 10 +
drivers/scsi/ipr.h | 1 +
drivers/scsi/iscsi_tcp.c | 10 +-
drivers/scsi/libfc/fc_libfc.c | 4 +-
drivers/scsi/libiscsi.c | 11 +
drivers/scsi/lpfc/lpfc_attr.c | 2 +-
drivers/scsi/lpfc/lpfc_bsg.c | 20 +-
drivers/scsi/lpfc/lpfc_crtn.h | 1 -
drivers/scsi/lpfc/lpfc_ct.c | 14 +-
drivers/scsi/lpfc/lpfc_debugfs.c | 4 +-
drivers/scsi/lpfc/lpfc_disc.h | 6 +-
drivers/scsi/lpfc/lpfc_els.c | 33 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 53 +-
drivers/scsi/lpfc/lpfc_init.c | 225 +-
drivers/scsi/lpfc/lpfc_mbox.c | 6 +-
drivers/scsi/lpfc/lpfc_nportdisc.c | 2 +
drivers/scsi/lpfc/lpfc_scsi.c | 34 +-
drivers/scsi/lpfc/lpfc_sli.c | 247 +-
drivers/scsi/lpfc/lpfc_sli.h | 1 +
drivers/scsi/lpfc/lpfc_sli4.h | 20 +-
drivers/scsi/lpfc/lpfc_version.h | 2 +-
drivers/scsi/megaraid/megaraid_sas.h | 161 +-
drivers/scsi/megaraid/megaraid_sas_base.c | 1099 ++++++---
drivers/scsi/megaraid/megaraid_sas_fp.c | 327 ++-
drivers/scsi/megaraid/megaraid_sas_fusion.c | 439 +++-
drivers/scsi/megaraid/megaraid_sas_fusion.h | 105 +-
drivers/scsi/mpt2sas/Kconfig | 2 +-
drivers/scsi/mpt2sas/mpi/mpi2.h | 12 +-
drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h | 29 +-
drivers/scsi/mpt2sas/mpi/mpi2_init.h | 8 +-
drivers/scsi/mpt2sas/mpi/mpi2_ioc.h | 74 +-
drivers/scsi/mpt2sas/mpi/mpi2_raid.h | 8 +-
drivers/scsi/mpt2sas/mpi/mpi2_sas.h | 2 +-
drivers/scsi/mpt2sas/mpi/mpi2_tool.h | 44 +-
drivers/scsi/mpt2sas/mpi/mpi2_type.h | 2 +-
drivers/scsi/mpt2sas/mpt2sas_base.c | 328 ++-
drivers/scsi/mpt2sas/mpt2sas_base.h | 28 +-
drivers/scsi/mpt2sas/mpt2sas_config.c | 2 +-
drivers/scsi/mpt2sas/mpt2sas_ctl.c | 2 +-
drivers/scsi/mpt2sas/mpt2sas_ctl.h | 2 +-
drivers/scsi/mpt2sas/mpt2sas_debug.h | 2 +-
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 197 +-
drivers/scsi/mpt2sas/mpt2sas_transport.c | 2 +-
drivers/scsi/mpt3sas/Kconfig | 2 +-
drivers/scsi/mpt3sas/mpi/mpi2.h | 8 +-
drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 18 +-
drivers/scsi/mpt3sas/mpi/mpi2_init.h | 8 +-
drivers/scsi/mpt3sas/mpi/mpi2_ioc.h | 64 +-
drivers/scsi/mpt3sas/mpi/mpi2_raid.h | 8 +-
drivers/scsi/mpt3sas/mpi/mpi2_sas.h | 8 +-
drivers/scsi/mpt3sas/mpi/mpi2_tool.h | 45 +-
drivers/scsi/mpt3sas/mpi/mpi2_type.h | 2 +-
drivers/scsi/mpt3sas/mpt3sas_base.c | 287 ++-
drivers/scsi/mpt3sas/mpt3sas_base.h | 49 +-
drivers/scsi/mpt3sas/mpt3sas_config.c | 2 +-
drivers/scsi/mpt3sas/mpt3sas_ctl.c | 2 +-
drivers/scsi/mpt3sas/mpt3sas_ctl.h | 2 +-
drivers/scsi/mpt3sas/mpt3sas_debug.h | 2 +-
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 78 +-
drivers/scsi/mpt3sas/mpt3sas_transport.c | 2 +-
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.c | 2 +-
drivers/scsi/mpt3sas/mpt3sas_trigger_diag.h | 2 +-
drivers/scsi/nsp32.c | 2 +-
drivers/scsi/pm8001/pm8001_ctl.c | 4 +-
drivers/scsi/pm8001/pm8001_hwi.c | 8 +
drivers/scsi/pmcraid.c | 14 +-
drivers/scsi/qla2xxx/qla_attr.c | 16 +-
drivers/scsi/qla2xxx/qla_bsg.c | 2 +-
drivers/scsi/qla2xxx/qla_dbg.c | 34 +-
drivers/scsi/qla2xxx/qla_def.h | 191 +-
drivers/scsi/qla2xxx/qla_fw.h | 8 +-
drivers/scsi/qla2xxx/qla_gbl.h | 9 +-
drivers/scsi/qla2xxx/qla_gs.c | 943 ++++++-
drivers/scsi/qla2xxx/qla_init.c | 41 +-
drivers/scsi/qla2xxx/qla_inline.h | 8 +
drivers/scsi/qla2xxx/qla_iocb.c | 17 +-
drivers/scsi/qla2xxx/qla_isr.c | 133 +-
drivers/scsi/qla2xxx/qla_mbx.c | 43 +-
drivers/scsi/qla2xxx/qla_mid.c | 2 +
drivers/scsi/qla2xxx/qla_mr.c | 16 +-
drivers/scsi/qla2xxx/qla_nx.c | 8 +-
drivers/scsi/qla2xxx/qla_os.c | 132 +-
drivers/scsi/qla2xxx/qla_sup.c | 7 +-
drivers/scsi/qla2xxx/qla_target.c | 693 ++++--
drivers/scsi/qla2xxx/qla_target.h | 31 +
drivers/scsi/qla2xxx/qla_tmpl.c | 106 +-
drivers/scsi/qla2xxx/qla_tmpl.h | 8 +
drivers/scsi/qla2xxx/qla_version.h | 2 +-
drivers/scsi/qla2xxx/tcm_qla2xxx.c | 45 +-
drivers/scsi/scsi.c | 12 +-
drivers/scsi/scsi_debug.c | 136 +-
drivers/scsi/scsi_error.c | 27 +-
drivers/scsi/scsi_lib.c | 24 +-
drivers/scsi/scsi_scan.c | 26 +
drivers/scsi/scsi_sysfs.c | 17 +-
drivers/scsi/sd.c | 8 +-
drivers/scsi/sr.c | 2 +
drivers/scsi/st.c | 2 +
drivers/scsi/storvsc_drv.c | 12 -
drivers/scsi/ufs/Kconfig | 2 +
drivers/scsi/ufs/ufs.h | 132 +-
drivers/scsi/ufs/ufshcd-pci.c | 55 +-
drivers/scsi/ufs/ufshcd-pltfrm.c | 291 ++-
drivers/scsi/ufs/ufshcd.c | 2592 ++++++++++++++++++--
drivers/scsi/ufs/ufshcd.h | 280 ++-
drivers/scsi/ufs/ufshci.h | 9 +-
drivers/scsi/ufs/unipro.h | 56 +
drivers/usb/storage/usb.c | 8 +
include/scsi/scsi.h | 1 +
include/scsi/scsi_device.h | 1 +
include/scsi/scsi_host.h | 6 +-
include/scsi/scsi_tcq.h | 2 +-
145 files changed, 10441 insertions(+), 3039 deletions(-)
James
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists