linux-kernel - Re: [PATCH] iio: gyro: itg3200: add suspend/resume support.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Sat, 08 Nov 2014 11:52:33 +0000
From:	Jonathan Cameron <jic23@...nel.org>
To:	NeilBrown <neilb@...e.de>
CC:	linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
	GTA04 owners <gta04-owner@...delico.com>,
	"chr >> Doug Anderson" <dianders@...omium.org>,
	Thorsten Nowak <thorsten.nowak@....fraunhofer.de>,
	Manuel Stahl <manuel.stahl@....fraunhofer.de>,
	"christian.strobel@....fraunhofer.de >> Christian Strobel" 
	<christian.strobel@....fraunhofer.de>
Subject: Re: [PATCH] iio: gyro: itg3200: add suspend/resume support.

On 08/11/14 00:18, NeilBrown wrote:
> 
> 
> Unless we put the device to sleep when not it use, it wastes
> 6mA.
> 
> If the device is asleep on probe, the 'id' register
> sometimes mis-reads - so reset first.  If the device responds
> at all a command sent to the address, it is almost certainly
> the correct device already.
> 
> Signed-off-by: NeilBrown <neil@...wn.name>
Hi Neil,

Looks fine to me - but you should have cc'd a few people from
the listed driver authors.  Will give them a few days to respond...

Jonathan
> 
> diff --git a/drivers/iio/gyro/itg3200_core.c b/drivers/iio/gyro/itg3200_core.c
> index 6a8020d48140..394667fb23f9 100644
> --- a/drivers/iio/gyro/itg3200_core.c
> +++ b/drivers/iio/gyro/itg3200_core.c
> @@ -223,6 +223,7 @@ static int itg3200_initial_setup(struct iio_dev *indio_dev)
>  	int ret;
>  	u8 val;
>  
> +	ret = itg3200_reset(indio_dev);
>  	ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_ADDRESS, &val);
>  	if (ret)
>  		goto err_ret;
> @@ -351,6 +352,35 @@ static int itg3200_remove(struct i2c_client *client)
>  	return 0;
>  }
>  
> +#ifdef CONFIG_PM_SLEEP
> +static int itg3200_suspend(struct device *dev)
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +	struct itg3200 *st = iio_priv(indio_dev);
> +	int ret;
> +
> +	dev_dbg(&st->i2c->dev, "suspend device");
> +
> +	ret = itg3200_write_reg_8(indio_dev,
> +			ITG3200_REG_POWER_MANAGEMENT,
> +			ITG3200_SLEEP);
> +	return ret;
> +}
> +
> +static int itg3200_resume(struct device *dev)
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +
> +	itg3200_reset(indio_dev);
> +	return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(itg3200_pm_ops, itg3200_suspend, itg3200_resume);
> +#define ITG3200_PM_OPS (&itg3200_pm_ops)
> +#else
> +#define ITG3200_PM_OPS NULL
> +#endif
> +
>  static const struct i2c_device_id itg3200_id[] = {
>  	{ "itg3200", 0 },
>  	{ }
> @@ -361,6 +391,7 @@ static struct i2c_driver itg3200_driver = {
>  	.driver = {
>  		.owner  = THIS_MODULE,
>  		.name	= "itg3200",
> +		.pm	= ITG3200_PM_OPS,
>  	},
>  	.id_table	= itg3200_id,
>  	.probe		= itg3200_probe,
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/