linux-kernel - [PATCH 0/7] Fix sti drivers whcih mix reg address spaces

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:	Wed, 19 Nov 2014 08:27:05 +0000
From:	Peter Griffin <peter.griffin@...aro.org>
To:	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	srinivas.kandagatla@...il.com, maxime.coquelin@...com,
	patrice.chotard@...com, peppe.cavallaro@...com, kishon@...com,
	arnd@...db.de
Cc:	peter.griffin@...aro.org, lee.jones@...aro.org,
	netdev@...r.kernel.org, devicetree@...r.kernel.org,
	alexandre.torgue@...com
Subject: [PATCH 0/7] Fix sti drivers whcih mix reg address spaces

Hi,

Following on from Arnds comments about the picophy driver here
https://lkml.org/lkml/2014/11/13/161, this series fixes the
remaining upstreamed drivers for STI, which are mixing address spaces
in the reg property. We do this in a way similar to the keystone
and bcm7445 platforms, by having sysconfig phandle/ offset pair (
where only one register is required). Or phandle / integer array
where multiple offsets in the same bank are needed).

This series breaks DT compatability! But the platform support
is WIP and only being used by the few developers who are upstreaming
support for it. I've made each change to the driver / dt doc / dt
file as a single atomic commit so the kernel will remain bisectable. 

This series then also enables the picophy driver, and adds back in
the ehci/ohci dt nodes for stih410 which make use of the picophy.

regards,

Peter.


Peter Griffin (7):
  phy: phy-stih407-usb: Pass sysconfig register offsets via syscfg
    property.
  phy: miphy365x: Pass sysconfig register offsets via syscfg dt
    property.
  ARM: STi: DT: STiH407: Add usb2 picophy dt nodes
  ARM: STi: DT: STiH410: Add usb2 picophy dt nodes
  ARM: STi: DT: STiH410: Add DT nodes for the ehci and ohci usb
    controllers.
  ARM: multi_v7_defconfig: Enable stih407 usb picophy
  stmmac: dwmac-sti: Pass sysconfig register offset via syscon dt
    property.

 .../devicetree/bindings/net/sti-dwmac.txt          | 14 ++---
 .../devicetree/bindings/phy/phy-miphy365x.txt      | 15 ++---
 .../devicetree/bindings/phy/phy-stih407-usb.txt    | 10 +---
 arch/arm/boot/dts/stih407-family.dtsi              |  9 +++
 arch/arm/boot/dts/stih410.dtsi                     | 70 ++++++++++++++++++++++
 arch/arm/boot/dts/stih415.dtsi                     | 12 ++--
 arch/arm/boot/dts/stih416.dtsi                     | 22 +++----
 arch/arm/configs/multi_v7_defconfig                |  1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c    | 13 ++--
 drivers/phy/phy-miphy365x.c                        | 29 ++++-----
 drivers/phy/phy-stih407-usb.c                      | 25 ++++----
 11 files changed, 143 insertions(+), 77 deletions(-)

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/