| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 21 Nov 2014 00:55:39 +0000
From: "Zheng, Lv" <lv.zheng@...el.com>
To: "Kirill A. Shutemov" <kirill@...temov.name>,
Peter Zijlstra <peterz@...radead.org>,
"Ingo Molnar (mingo@...hat.com)" <mingo@...hat.com>
CC: "Rafael J. Wysocki" <rjw@...ysocki.net>,
"Wysocki, Rafael J" <rafael.j.wysocki@...el.com>,
"Brown, Len" <len.brown@...el.com>, Lv Zheng <zetalog@...il.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-acpi@...r.kernel.org" <linux-acpi@...r.kernel.org>
Subject: RE: [PATCH 1/6] ACPI/EC: Introduce STARTED/STOPPED flags to replace
BLOCKED flag.
Hi, All
It's my fault.
I didn't add ACPI_GPE_HANDLER_RAW flag in ec.c to enable this fix.
Sorry for the noise.
Let me post the updated [RFC PATCH 2] for you to confirm.
Thanks
-Lv
> From: Zheng, Lv
> Sent: Friday, November 21, 2014 8:43 AM
>
> Hi, Shutemov
>
> > From: Kirill A. Shutemov [mailto:kirill@...temov.name]
> > Sent: Friday, November 21, 2014 5:34 AM
> >
> > On Thu, Nov 20, 2014 at 02:20:53AM +0000, Zheng, Lv wrote:
> > > Since you have environment to trigger this.
> > > Could you also help to check if the fix can work?
> > > I've just sent them as RFC to this thread.
> >
> > With these two patchse on top of my -next snapshot I still see the issue:
> >
> > [ 0.324119] ======================================================
> > [ 0.324125] [ INFO: possible circular locking dependency detected ]
> > [ 0.324132] 3.18.0-rc5-next-20141119-07477-g4c45e54745b2 #80 Not tainted
> > [ 0.324138] -------------------------------------------------------
> > [ 0.324144] swapper/3/0 is trying to acquire lock:
> > [ 0.324149] (&(&ec->lock)->rlock){-.....}, at: [<ffffffff814cb803>] acpi_ec_gpe_handler+0x21/0xfc
> > [ 0.324165]
> > but task is already holding lock:
> > [ 0.324171] (&(*(&acpi_gbl_gpe_lock))->rlock){-.....}, at: [<ffffffff814c3b3e>] acpi_os_acquire_lock+0xe/0x10
> > [ 0.324185]
> > which lock already depends on the new lock.
> >
> > [ 0.324193]
> > the existing dependency chain (in reverse order) is:
> > [ 0.324200]
> > -> #1 (&(*(&acpi_gbl_gpe_lock))->rlock){-.....}:
> > [ 0.324209] [<ffffffff81158f0f>] lock_acquire+0xdf/0x2d0
> > [ 0.324218] [<ffffffff81b004c0>] _raw_spin_lock_irqsave+0x50/0x70
> > [ 0.324228] [<ffffffff814c3b3e>] acpi_os_acquire_lock+0xe/0x10
> > [ 0.324235] [<ffffffff814d9945>] acpi_enable_gpe+0x27/0x75
> > [ 0.324244] [<ffffffff814cc960>] acpi_ec_start+0x67/0x88
> > [ 0.324251] [<ffffffff81af4ca9>] ec_install_handlers+0x41/0xa4
> > [ 0.324258] [<ffffffff823e4134>] acpi_ec_ecdt_probe+0x1a9/0x1ea
> > [ 0.324267] [<ffffffff823e395e>] acpi_init+0x8b/0x26e
> > [ 0.324275] [<ffffffff81002148>] do_one_initcall+0xd8/0x210
> > [ 0.324283] [<ffffffff8239c1dc>] kernel_init_freeable+0x1f5/0x282
> > [ 0.324293] [<ffffffff81aea0fe>] kernel_init+0xe/0xf0
> > [ 0.324300] [<ffffffff81b011bc>] ret_from_fork+0x7c/0xb0
> > [ 0.324307]
> > -> #0 (&(&ec->lock)->rlock){-.....}:
> > [ 0.324315] [<ffffffff811585af>] __lock_acquire+0x210f/0x2220
> > [ 0.324323] [<ffffffff81158f0f>] lock_acquire+0xdf/0x2d0
> > [ 0.324330] [<ffffffff81b004c0>] _raw_spin_lock_irqsave+0x50/0x70
> > [ 0.324338] [<ffffffff814cb803>] acpi_ec_gpe_handler+0x21/0xfc
> > [ 0.324346] [<ffffffff814d68e0>] acpi_ev_gpe_dispatch+0xb9/0x12e
> > [ 0.324353] [<ffffffff814d6a5a>] acpi_ev_gpe_detect+0x105/0x227
> > [ 0.324360] [<ffffffff814d8af5>] acpi_ev_sci_xrupt_handler+0x22/0x38
> > [ 0.324368] [<ffffffff814c2dae>] acpi_irq+0x16/0x31
> > [ 0.324375] [<ffffffff8116ecbf>] handle_irq_event_percpu+0x6f/0x540
> > [ 0.324384] [<ffffffff8116f1d1>] handle_irq_event+0x41/0x70
> > [ 0.324392] [<ffffffff81171ee6>] handle_fasteoi_irq+0x86/0x140
> > [ 0.324399] [<ffffffff81075a22>] handle_irq+0x22/0x40
> > [ 0.324408] [<ffffffff81b0436f>] do_IRQ+0x4f/0xf0
> > [ 0.324416] [<ffffffff81b02072>] ret_from_intr+0x0/0x1a
> > [ 0.324423] [<ffffffff8107e7a3>] default_idle+0x23/0x260
> > [ 0.324430] [<ffffffff8107f37f>] arch_cpu_idle+0xf/0x20
> > [ 0.324438] [<ffffffff8114a95b>] cpu_startup_entry+0x36b/0x5b0
> > [ 0.324445] [<ffffffff810a8d24>] start_secondary+0x1a4/0x1d0
> > [ 0.324454]
> > other info that might help us debug this:
> >
> > [ 0.324462] Possible unsafe locking scenario:
> >
> > [ 0.324468] CPU0 CPU1
> > [ 0.324473] ---- ----
> > [ 0.324477] lock(&(*(&acpi_gbl_gpe_lock))->rlock);
> > [ 0.324483] lock(&(&ec->lock)->rlock);
> > [ 0.324490] lock(&(*(&acpi_gbl_gpe_lock))->rlock);
> > [ 0.324498] lock(&(&ec->lock)->rlock);
> > [ 0.324503]
>
> Let me convert this into call stack:
> CPU0 CPU1
> acpi_irq
> +GPE acpi_ev_gpe_dispatch
> acpi_bus_init
> acpi_ec_ecdt_probe
> acpi_install_gpe_handler()
> +EC acpi_ec_start
> +GPE acpi_enable_gpe
> -GPE
> -EC
> +EC acpi_ec_gpe_handler
> -EC
> -GPE
>
> I used + to indicate spin_lock() and - to indicate spin_unlock().
> GPE to indicate acpi_gbl_gpe_lock, EC to indicate ec->lock.
>
> Are you sure you still can see this?
> Please help to check the [RFC PATCH 2] to see if the following code is exactly applied:
> + /*
> + * There is no protection around the namespace node
> + * and the GPE handler to ensure a safe destruction
> + * because:
> + * 1. The namespace node is expected to always
> + * exist after loading a table.
> + * 2. The GPE handler is expected to be flushed by
> + * acpi_os_wait_events_complete() before the
> + * destruction.
> + */
> + acpi_os_release_lock
> + (acpi_gbl_gpe_lock, flags);
> + int_status |=
> + gpe_handler_info->
> + address(gpe_device,
> + gpe_number,
> + gpe_handler_info->
> + context);
>
> This is where acpi_ec_gpe_handler() will be invoked.
>
> + flags =
> + acpi_os_acquire_lock
> + (acpi_gbl_gpe_lock);
>
> So when acpi_ec_gpe_handler() is invoked, GPE lock is release.
> There should be no reason you can see this warning, because the call stack will be:
>
> CPU0 CPU1
> CPU0 CPU1
> acpi_irq
> +GPE acpi_ev_gpe_dispatch
> acpi_bus_init
> acpi_ec_ecdt_probe
> acpi_install_gpe_handler()
> +EC acpi_ec_start
> +GPE acpi_enable_gpe
> -GPE
> -EC
> -GPE
> +EC acpi_ec_gpe_handler
> -EC
> +GPE
> -GPE
>
> When acpi_ec_gpe_handler() is invoked, there is no acpi_gbl_gpe_lock locked.
> So I really cannot understand your test result.
> Could you confirm this again?
>
> Maybe I just don't understand how this warning is generated, and this is just a kind of warning that we can ignore.
> Let me ask Peter and Ingo to check if this is just a limitation of lockdep.
>
> Thanks and best regards
> -Lv
>
> > *** DEADLOCK ***
> >
> > [ 0.324510] 1 lock held by swapper/3/0:
> > [ 0.324514] #0: (&(*(&acpi_gbl_gpe_lock))->rlock){-.....}, at: [<ffffffff814c3b3e>] acpi_os_acquire_lock+0xe/0x10
> > [ 0.324528]
> > stack backtrace:
> > [ 0.324535] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 3.18.0-rc5-next-20141119-07477-g4c45e54745b2 #80
> > [ 0.324543] Hardware name: LENOVO 3460CC6/3460CC6, BIOS G6ET93WW (2.53 ) 02/04/2013
> > [ 0.324550] ffffffff82cae120 ffff88011e2c3ba8 ffffffff81af484e 0000000000000011
> > [ 0.324560] ffffffff82cae120 ffff88011e2c3bf8 ffffffff81af3361 0000000000000001
> > [ 0.324569] ffff88011e2c3c58 ffff88011e2c3bf8 ffff8801193f92b0 ffff8801193f9b00
> > [ 0.324579] Call Trace:
> > [ 0.324582] <IRQ> [<ffffffff81af484e>] dump_stack+0x4c/0x6e
> > [ 0.324593] [<ffffffff81af3361>] print_circular_bug+0x2b2/0x2c3
> > [ 0.324601] [<ffffffff811585af>] __lock_acquire+0x210f/0x2220
> > [ 0.324609] [<ffffffff81158f0f>] lock_acquire+0xdf/0x2d0
> > [ 0.324616] [<ffffffff814cb803>] ? acpi_ec_gpe_handler+0x21/0xfc
> > [ 0.324624] [<ffffffff81b004c0>] _raw_spin_lock_irqsave+0x50/0x70
> > [ 0.324631] [<ffffffff814cb803>] ? acpi_ec_gpe_handler+0x21/0xfc
> > [ 0.324640] [<ffffffff814e08f7>] ? acpi_hw_write+0x4b/0x52
> > [ 0.324646] [<ffffffff814cb803>] acpi_ec_gpe_handler+0x21/0xfc
> > [ 0.324653] [<ffffffff814d68e0>] acpi_ev_gpe_dispatch+0xb9/0x12e
> > [ 0.324660] [<ffffffff814d6a5a>] acpi_ev_gpe_detect+0x105/0x227
> > [ 0.324668] [<ffffffff814d8af5>] acpi_ev_sci_xrupt_handler+0x22/0x38
> > [ 0.324675] [<ffffffff814c2dae>] acpi_irq+0x16/0x31
> > [ 0.324683] [<ffffffff8116ecbf>] handle_irq_event_percpu+0x6f/0x540
> > [ 0.324691] [<ffffffff8116f1d1>] handle_irq_event+0x41/0x70
> > [ 0.324698] [<ffffffff81171e88>] ? handle_fasteoi_irq+0x28/0x140
> > [ 0.324705] [<ffffffff81171ee6>] handle_fasteoi_irq+0x86/0x140
> > [ 0.324712] [<ffffffff81075a22>] handle_irq+0x22/0x40
> > [ 0.324719] [<ffffffff81b0436f>] do_IRQ+0x4f/0xf0
> > [ 0.324725] [<ffffffff81b02072>] common_interrupt+0x72/0x72
> > [ 0.324731] <EOI> [<ffffffff810b8986>] ? native_safe_halt+0x6/0x10
> > [ 0.324743] [<ffffffff81154efd>] ? trace_hardirqs_on+0xd/0x10
> > [ 0.324750] [<ffffffff8107e7a3>] default_idle+0x23/0x260
> > [ 0.324757] [<ffffffff8107f37f>] arch_cpu_idle+0xf/0x20
> > [ 0.324763] [<ffffffff8114a95b>] cpu_startup_entry+0x36b/0x5b0
> > [ 0.324771] [<ffffffff810a8d24>] start_secondary+0x1a4/0x1d0
> >
> >
> > >
> > > Thanks and best regards
> > > -Lv
> > >
> > > > From: Kirill A. Shutemov [mailto:kirill@...temov.name]
> > > > Sent: Wednesday, November 19, 2014 8:16 PM
> > > > To: Rafael J. Wysocki
> > > > Cc: Zheng, Lv; Wysocki, Rafael J; Brown, Len; Lv Zheng; linux-kernel@...r.kernel.org; linux-acpi@...r.kernel.org
> > > > Subject: Re: [PATCH 1/6] ACPI/EC: Introduce STARTED/STOPPED flags to replace BLOCKED flag.
> > > >
> > > > On Tue, Nov 18, 2014 at 10:20:11PM +0100, Rafael J. Wysocki wrote:
> > > > > On Tuesday, November 18, 2014 03:23:28 PM Kirill A. Shutemov wrote:
> > > > > > On Wed, Nov 05, 2014 at 02:52:36AM +0000, Zheng, Lv wrote:
> > > > >
> > > > > [cut]
> > > > >
> > > > > >
> > > > > > Here's lockdep warning I see on -next:
> > > > >
> > > > > Is patch [1/6] sufficient to trigger this or do you need all [1-4/6]?
> > > >
> > > > I only saw it on -next. I've tried to apply patches directly on -rc5 and
> > > > don't see the warning. I don't have time for proper bisecting, sorry.
> > > >
> > > > --
> > > > Kirill A. Shutemov
> >
> > --
> > Kirill A. Shutemov
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists