| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 3 Dec 2014 01:12:09 +0100
From: Stefan Agner <stefan@...er.ch>
To: shawn.guo@...aro.org, kernel@...gutronix.de,
linux@....linux.org.uk, u.kleine-koenig@...gutronix.de,
jason@...edaemon.net, olof@...om.net, arnd@...db.de,
daniel.lezcano@...aro.org, tglx@...utronix.de,
mark.rutland@....com, pawel.moll@....com, robh+dt@...nel.org,
ijc+devicetree@...lion.org.uk, galak@...eaurora.org
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, Stefan Agner <stefan@...er.ch>
Subject: [PATCH 10/12] ARM: vf610m4: add new machine and SoC for Vybrid on Cortex-M4
This patch adds a new machine MACH_MXCM4 which requires !MMU and
!MULTIARCH and is meant as machine for the hetregenous multi-core
Vybrid/i.MX SoC's to run Linux on the Cortex-M4.
The first SoC supported is Vybrid on Cortex-M4 (SOC_VF610M4).
Signed-off-by: Stefan Agner <stefan@...er.ch>
---
arch/arm/Kconfig | 12 ++++++++++++
arch/arm/Kconfig.debug | 4 ++--
arch/arm/Makefile | 1 +
arch/arm/mach-imx/Kconfig | 29 ++++++++++++++++++++++++++---
arch/arm/mach-imx/Makefile | 1 +
arch/arm/mach-imx/Makefile.boot | 0
arch/arm/mach-imx/mach-vf610m4.c | 31 +++++++++++++++++++++++++++++++
drivers/mmc/host/Kconfig | 2 +-
drivers/pinctrl/freescale/Kconfig | 2 +-
9 files changed, 75 insertions(+), 7 deletions(-)
create mode 100644 arch/arm/mach-imx/Makefile.boot
create mode 100644 arch/arm/mach-imx/mach-vf610m4.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 89c4b5c..fdebe18 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -459,6 +459,18 @@ config ARCH_FOOTBRIDGE
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
+menuconfig ARCH_MXCM4
+ bool "Freescale Vybrid/i.MX family on Cortex-M4" if !MMU
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_CPU_SUSPEND if PM
+ select CLKSRC_MMIO
+ select GENERIC_IRQ_CHIP
+ select PINCTRL
+ select PM_OPP if PM
+ select SOC_BUS
+ help
+ Support for Freescale Vybrid/iMX-based family of processors on Cortex-M4
+
config ARCH_NETX
bool "Hilscher NetX based"
select ARM_VIC
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 03dc4c1..f479727 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -459,7 +459,7 @@ choice
config DEBUG_VF_UART
bool "Vybrid UART"
- depends on SOC_VF610
+ depends on SOC_VF610 || SOC_VF610M4
help
Say Y here if you want kernel low-level debugging support
on Vybrid based platforms.
@@ -1026,7 +1026,7 @@ config DEBUG_VF_UART_PORT
int "Vybrid Debug UART Port Selection" if DEBUG_VF_UART
default 1
range 0 3
- depends on SOC_VF610
+ depends on SOC_VF610 || SOC_VF610M4
help
Choose UART port on which kernel low-level debug messages
should be output.
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 034a949..0b84168 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -174,6 +174,7 @@ machine-$(CONFIG_ARCH_MSM) += msm
machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0
machine-$(CONFIG_ARCH_MVEBU) += mvebu
machine-$(CONFIG_ARCH_MXC) += imx
+machine-$(CONFIG_ARCH_MXCM4) += imx
machine-$(CONFIG_ARCH_MEDIATEK) += mediatek
machine-$(CONFIG_ARCH_MXS) += mxs
machine-$(CONFIG_ARCH_NETX) += netx
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 2935972..56635d5 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,3 +1,6 @@
+config HAVE_VF610_MSCM
+ bool
+
menuconfig ARCH_MXC
bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
select ARCH_REQUIRE_GPIOLIB
@@ -58,9 +61,6 @@ config HAVE_IMX_SRC
def_bool y if SMP
select ARCH_HAS_RESET_CONTROLLER
-config HAVE_VF610_MSCM
- bool
-
config IMX_HAVE_IOMUX_V1
bool
@@ -677,3 +677,26 @@ endif
source "arch/arm/mach-imx/devices/Kconfig"
endif
+
+if !MMU && ARCH_MXCM4
+
+config SOC_VF610M4
+ bool "Vybrid Family VF610 support for Cortex-M4"
+ select HAVE_VF610_MSCM
+ select ARCH_REQUIRE_GPIOLIB
+ select PINCTRL_VF610
+ select PINCTRL_IMX
+ select ARM_NVIC
+ select AUTO_ZRELADDR
+ select CPU_V7M
+ select COMMON_CLK
+ select GENERIC_CLOCKEVENTS
+ select NO_DMA
+ select NO_IOPORT_MAP
+ select SPARSE_IRQ
+ select USE_OF
+ select VF_PIT_TIMER
+ help
+ Support for Vybrid Familiy VF610's Cortex-M4
+
+endif
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 82b1159..21fb423 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -110,6 +110,7 @@ obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
obj-$(CONFIG_HAVE_VF610_MSCM) += mscm-vf610.o
obj-$(CONFIG_SOC_VF610) += clk-vf610.o mach-vf610.o
+obj-$(CONFIG_SOC_VF610M4) += clk-vf610.o mach-vf610m4.o
obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
new file mode 100644
index 0000000..e69de29
diff --git a/arch/arm/mach-imx/mach-vf610m4.c b/arch/arm/mach-imx/mach-vf610m4.c
new file mode 100644
index 0000000..245788f
--- /dev/null
+++ b/arch/arm/mach-imx/mach-vf610m4.c
@@ -0,0 +1,31 @@
+/*
+ * Copyright 2014 Stefan Agner
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/irqchip.h>
+#include <linux/kernel.h>
+#include <asm/v7m.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+
+static void __init vf610m4_init_irq(void)
+{
+ vf610_mscm_init();
+ irqchip_init();
+}
+
+static const char *const vf610m4_compat[] __initconst = {
+ "fsl,vf610m4",
+ NULL
+};
+
+DT_MACHINE_START(VF610M4DT, "VF610 on Cortex-M4 (Device Tree Support)")
+ .dt_compat = vf610m4_compat,
+ .init_irq = vf610m4_init_irq,
+ .restart = armv7m_restart,
+MACHINE_END
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 1386065..bfbec2d 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -166,7 +166,7 @@ config MMC_SDHCI_CNS3XXX
config MMC_SDHCI_ESDHC_IMX
tristate "SDHCI support for the Freescale eSDHC/uSDHC i.MX controller"
- depends on ARCH_MXC
+ depends on ARCH_MXC || ARCH_MXCM4
depends on MMC_SDHCI_PLTFM
select MMC_SDHCI_IO_ACCESSORS
help
diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
index 16aac38..5271ca2 100644
--- a/drivers/pinctrl/freescale/Kconfig
+++ b/drivers/pinctrl/freescale/Kconfig
@@ -89,7 +89,7 @@ config PINCTRL_IMX6SX
config PINCTRL_VF610
bool "Freescale Vybrid VF610 pinctrl driver"
- depends on SOC_VF610
+ depends on SOC_VF610 || SOC_VF610M4
select PINCTRL_IMX
help
Say Y here to enable the Freescale Vybrid VF610 pinctrl driver
--
2.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists