[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date: Fri, 12 Dec 2014 15:45:17 +0800
From: Eddie Huang <eddie.huang@...iatek.com>
To: Matthias Brugger <matthias.bgg@...il.com>
CC: Yingjoe Chen <yingjoe.chen@...iatek.com>,
Rob Herring <robh+dt@...nel.org>,
Jason Cooper <jason@...edaemon.net>,
srv_heupstream <srv_heupstream@...iatek.com>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Thomas Gleixner <tglx@...utronix.de>,
Olof Johansson <olof@...om.net>,
Robert Richter <rrichter@...ium.com>,
Mark Brown <broonie@...aro.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
Sascha Hauer <kernel@...gutronix.de>,
YH Chen (陳昱豪)
<yh.chen@...iatek.com>
Subject: Re: [PATCH 3/4] arm64: dts: Add mediatek MT8173 SoC and evaluation
board dts and Makefile
Hi Matthias,
On Thu, 2014-12-11 at 14:02 +0100, Matthias Brugger wrote:
> Hi Eddie,
>
> 2014-12-11 13:47 GMT+01:00 Eddie Huang <eddie.huang@...iatek.com>:
> > On Wed, 2014-12-10 at 15:50 +0100, Matthias Brugger wrote:
> >> 2014-12-10 15:27 GMT+01:00 Yingjoe Chen <yingjoe.chen@...iatek.com>:
> >> >
> >> > Hi,
> >> >
> >> > On Wed, 2014-12-10 at 18:50 +0800, Eddie Huang wrote:
> >> > <...>
> >> >> diff --git a/arch/arm64/boot/dts/mt8173-evb.dts b/arch/arm64/boot/dts/mt8173-evb.dts
> >> >> new file mode 100644
> >> >> index 0000000..adf26dd
> >> >> --- /dev/null
> >> >> +++ b/arch/arm64/boot/dts/mt8173-evb.dts
> >> > <...>
> >> >> + timer {
> >> >> + compatible = "arm,armv8-timer";
> >> >> + interrupt-parent = <&gic>;
> >> >> + interrupts = <1 13 0x8>,
> >> >> + <1 14 0x8>,
> >> >> + <1 11 0x8>,
> >> >> + <1 10 0x8>;
> >> >> + clock-frequency = <13000000>;
> >> >
> >> > I believe our firmware doesn't need this line. Please remove it.
> >>
> >> The point here would be to know if you need to enable a special timer
> >> from the mtk-timer block to get the arch timer working.
> >> In any case, you will need some sort of timer. This dts does not
> >> describe the mtk-timer (may in the mt8173 it does not exist) but
> >> defines the clocks clk26m and clk32k. So if you don't use the
> >> mtk-timer, please remove the clocks as there isn't a block using them.
> >>
> >
> > MT8173 has two timer set: CPUGPT and APBGPT, and use CPUGPT to enable
> > arch_timer. Previous series only have APBGPT. MT8173 still need enable
> > CPUGPT to get arch timer working, we put this in loader, and transparent
> > to kernel. So I will remove clk26m and clk32k in next version.
>
> Ok, so if this is done in the bootloader, there shouldn't be a problem
> then. Perfect.
>
> Just one more comment on the dts nodes. Can you use the makros defined
> for the interrupt type
> e.g "GIC_PPI 14 IRQ_TYPE_LEVEL_LOW" instead of "1 14 0x8". This makes
> the dts easier to read.
>
> Thanks,
> Matthias
>
3.18 still don't have following patch
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-November/301425.html
So I can't use interrupt macro in mt8173.dtsi
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists