| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 17 Dec 2014 23:11:35 +0100
From: Hartmut Knaack <knaack.h@....de>
To: Karol Wrona <k.wrona@...sung.com>,
Jonathan Cameron <jic23@...nel.org>, linux-iio@...r.kernel.org,
linux-kernel@...r.kernel.org
CC: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
Karol Wrona <wrona.vy@...il.com>
Subject: Re: [PATCH v3 1/5] iio: common: ssp_sensors: Add sensorhub driver
Karol Wrona schrieb am 05.12.2014 um 20:54:
> Sensorhub is MCU dedicated to collect data and manage several sensors.
> Sensorhub is a spi device which provides a layer for IIO devices. It provides
> some data parsing and common mechanism for sensorhub sensors.
>
> Adds common sensorhub library for sensorhub driver and iio drivers
> which uses sensorhub MCU to communicate with sensors.
>
Looks very good now, mainly some new and old minor style issues remaining, see
inline.
> Change-Id: I4f066e9f3f477d4f6faabd4507be98e32f79e344
> Signed-off-by: Karol Wrona <k.wrona@...sung.com>
> Acked-by: Kyungmin Park <kyungmin.park@...sung.com>
> ---
> drivers/iio/common/Kconfig | 1 +
> drivers/iio/common/Makefile | 1 +
> drivers/iio/common/ssp_sensors/Kconfig | 24 ++
> drivers/iio/common/ssp_sensors/Makefile | 6 +
> drivers/iio/common/ssp_sensors/ssp.h | 254 +++++++++++
> drivers/iio/common/ssp_sensors/ssp_dev.c | 693 ++++++++++++++++++++++++++++++
> drivers/iio/common/ssp_sensors/ssp_spi.c | 644 +++++++++++++++++++++++++++
> include/linux/iio/common/ssp_sensors.h | 80 ++++
> 8 files changed, 1703 insertions(+)
> create mode 100644 drivers/iio/common/ssp_sensors/Kconfig
> create mode 100644 drivers/iio/common/ssp_sensors/Makefile
> create mode 100644 drivers/iio/common/ssp_sensors/ssp.h
> create mode 100644 drivers/iio/common/ssp_sensors/ssp_dev.c
> create mode 100644 drivers/iio/common/ssp_sensors/ssp_spi.c
> create mode 100644 include/linux/iio/common/ssp_sensors.h
>
> diff --git a/drivers/iio/common/Kconfig b/drivers/iio/common/Kconfig
> index 0b6e97d..790f106 100644
> --- a/drivers/iio/common/Kconfig
> +++ b/drivers/iio/common/Kconfig
> @@ -3,4 +3,5 @@
> #
>
> source "drivers/iio/common/hid-sensors/Kconfig"
> +source "drivers/iio/common/ssp_sensors/Kconfig"
> source "drivers/iio/common/st_sensors/Kconfig"
> diff --git a/drivers/iio/common/Makefile b/drivers/iio/common/Makefile
> index 3112df0..b1e4d9c 100644
> --- a/drivers/iio/common/Makefile
> +++ b/drivers/iio/common/Makefile
> @@ -8,4 +8,5 @@
>
> # When adding new entries keep the list in alphabetical order
> obj-y += hid-sensors/
> +obj-y += ssp_sensors/
> obj-y += st_sensors/
> diff --git a/drivers/iio/common/ssp_sensors/Kconfig b/drivers/iio/common/ssp_sensors/Kconfig
> new file mode 100644
> index 0000000..c1d054e
> --- /dev/null
> +++ b/drivers/iio/common/ssp_sensors/Kconfig
> @@ -0,0 +1,24 @@
> +#
> +# SSP sensor drivers and commons configuration
> +#
> +menu "SSP Sensor Common"
> +
> +config IIO_SSP_SENSOR
> + tristate "Commons for all SSP Sensor IIO drivers"
> + depends on SSP_SENSORS
Shouldn't the individual sensor driver depend on the commons?
> + select IIO_BUFFER
> + select IIO_KFIFO_BUF
> + help
> + Say yes here to build commons for SSP sensors.
It's tristate, so please provide module information.
> +
> +config SSP_SENSORS
Prefix with IIO_?
> + tristate "Samsung Sensorhub driver"
> + depends on SPI
> + help
> + SSP driver for sensorhub.
> + If you say yes here you get ssp support for
> + sensorhub.
> + To compile this driver as a module, choose M here: the
> + module will be called sensorhub.
> +
> +endmenu
> diff --git a/drivers/iio/common/ssp_sensors/Makefile b/drivers/iio/common/ssp_sensors/Makefile
> new file mode 100644
> index 0000000..7aede30
> --- /dev/null
> +++ b/drivers/iio/common/ssp_sensors/Makefile
> @@ -0,0 +1,6 @@
> +#
> +# Makefile for SSP sensor drivers and commons.
> +#
> +
> +obj-$(CONFIG_IIO_SSP_SENSOR) += ssp_iio.o
> +obj-$(CONFIG_SSP_SENSORS) += ssp_dev.o ssp_spi.o
> diff --git a/drivers/iio/common/ssp_sensors/ssp.h b/drivers/iio/common/ssp_sensors/ssp.h
> new file mode 100644
> index 0000000..b2fbc82
> --- /dev/null
> +++ b/drivers/iio/common/ssp_sensors/ssp.h
> @@ -0,0 +1,254 @@
> +/*
> + * Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef __SSP_SENSORHUB_H__
> +#define __SSP_SENSORHUB_H__
> +
> +#include <linux/delay.h>
> +#include <linux/gpio.h>
> +#include <linux/iio/common/ssp_sensors.h>
> +#include <linux/iio/iio.h>
> +#include <linux/spi/spi.h>
> +
> +#define SSP_DEVICE_ID 0x55
> +
> +#ifdef SSP_DBG
> +#define ssp_dbg(format, ...) pr_info("[SSP] "format, ##__VA_ARGS__)
> +#else
> +#define ssp_dbg(format, ...)
> +#endif
> +
> +#define SSP_SW_RESET_TIME 3000
> +/* Sensor polling in ms */
> +#define SSP_DEFAULT_POLLING_DELAY 200
> +#define SSP_DEFAULT_RETRIES 3
> +#define SSP_DATA_PACKET_SIZE 960
> +
> +enum {
> + SSP_KERNEL_BINARY = 0,
> + SSP_KERNEL_CRASHED_BINARY,
> +};
> +
> +enum {
> + SSP_INITIALIZATION_STATE = 0,
> + SSP_NO_SENSOR_STATE,
> + SSP_ADD_SENSOR_STATE,
> + SSP_RUNNING_SENSOR_STATE,
> +};
> +
> +/* Firmware download STATE */
> +enum {
> + SSP_FW_DL_STATE_FAIL = -1,
> + SSP_FW_DL_STATE_NONE = 0,
> + SSP_FW_DL_STATE_NEED_TO_SCHEDULE,
> + SSP_FW_DL_STATE_SCHEDULED,
> + SSP_FW_DL_STATE_DOWNLOADING,
> + SSP_FW_DL_STATE_SYNC,
> + SSP_FW_DL_STATE_DONE,
> +};
> +
> +#define SSP_INVALID_REVISION 99999
> +#define SSP_INVALID_REVISION2 0xffffff
> +
> +/* AP -> SSP Instruction */
> +#define SSP_MSG2SSP_INST_BYPASS_SENSOR_ADD 0xa1
> +#define SSP_MSG2SSP_INST_BYPASS_SENSOR_RM 0xa2
> +#define SSP_MSG2SSP_INST_REMOVE_ALL 0xa3
> +#define SSP_MSG2SSP_INST_CHANGE_DELAY 0xa4
> +#define SSP_MSG2SSP_INST_LIBRARY_ADD 0xb1
> +#define SSP_MSG2SSP_INST_LIBRARY_REMOVE 0xb2
> +#define SSP_MSG2SSP_INST_LIB_NOTI 0xb4
> +#define SSP_MSG2SSP_INST_LIB_DATA 0xc1
> +
> +#define SSP_MSG2SSP_AP_MCU_SET_GYRO_CAL 0xcd
> +#define SSP_MSG2SSP_AP_MCU_SET_ACCEL_CAL 0xce
> +#define SSP_MSG2SSP_AP_STATUS_SHUTDOWN 0xd0
> +#define SSP_MSG2SSP_AP_STATUS_WAKEUP 0xd1
> +#define SSP_MSG2SSP_AP_STATUS_SLEEP 0xd2
> +#define SSP_MSG2SSP_AP_STATUS_RESUME 0xd3
> +#define SSP_MSG2SSP_AP_STATUS_SUSPEND 0xd4
> +#define SSP_MSG2SSP_AP_STATUS_RESET 0xd5
> +#define SSP_MSG2SSP_AP_STATUS_POW_CONNECTED 0xd6
> +#define SSP_MSG2SSP_AP_STATUS_POW_DISCONNECTED 0xd7
> +#define SSP_MSG2SSP_AP_TEMPHUMIDITY_CAL_DONE 0xda
> +#define SSP_MSG2SSP_AP_MCU_SET_DUMPMODE 0xdb
> +#define SSP_MSG2SSP_AP_MCU_DUMP_CHECK 0xdc
> +#define SSP_MSG2SSP_AP_MCU_BATCH_FLUSH 0xdd
> +#define SSP_MSG2SSP_AP_MCU_BATCH_COUNT 0xdf
> +
> +#define SSP_MSG2SSP_AP_WHOAMI 0x0f
> +#define SSP_MSG2SSP_AP_FIRMWARE_REV 0xf0
> +#define SSP_MSG2SSP_AP_SENSOR_FORMATION 0xf1
> +#define SSP_MSG2SSP_AP_SENSOR_PROXTHRESHOLD 0xf2
> +#define SSP_MSG2SSP_AP_SENSOR_BARCODE_EMUL 0xf3
> +#define SSP_MSG2SSP_AP_SENSOR_SCANNING 0xf4
> +#define SSP_MSG2SSP_AP_SET_MAGNETIC_HWOFFSET 0xf5
> +#define SSP_MSG2SSP_AP_GET_MAGNETIC_HWOFFSET 0xf6
> +#define SSP_MSG2SSP_AP_SENSOR_GESTURE_CURRENT 0xf7
> +#define SSP_MSG2SSP_AP_GET_THERM 0xf8
> +#define SSP_MSG2SSP_AP_GET_BIG_DATA 0xf9
> +#define SSP_MSG2SSP_AP_SET_BIG_DATA 0xfa
> +#define SSP_MSG2SSP_AP_START_BIG_DATA 0xfb
> +#define SSP_MSG2SSP_AP_SET_MAGNETIC_STATIC_MATRIX 0xfd
> +#define SSP_MSG2SSP_AP_SENSOR_TILT 0xea
> +#define SSP_MSG2SSP_AP_MCU_SET_TIME 0xfe
> +#define SSP_MSG2SSP_AP_MCU_GET_TIME 0xff
> +
> +#define SSP_MSG2SSP_AP_FUSEROM 0x01
> +
> +/* voice data */
> +#define SSP_TYPE_WAKE_UP_VOICE_SERVICE 0x01
> +#define SSP_TYPE_WAKE_UP_VOICE_SOUND_SOURCE_AM 0x01
> +#define SSP_TYPE_WAKE_UP_VOICE_SOUND_SOURCE_GRAMMER 0x02
> +
> +/* Factory Test */
> +#define SSP_ACCELEROMETER_FACTORY 0x80
> +#define SSP_GYROSCOPE_FACTORY 0x81
> +#define SSP_GEOMAGNETIC_FACTORY 0x82
> +#define SSP_PRESSURE_FACTORY 0x85
> +#define SSP_GESTURE_FACTORY 0x86
> +#define SSP_TEMPHUMIDITY_CRC_FACTORY 0x88
> +#define SSP_GYROSCOPE_TEMP_FACTORY 0x8a
> +#define SSP_GYROSCOPE_DPS_FACTORY 0x8b
> +#define SSP_MCU_FACTORY 0x8c
> +#define SSP_MCU_SLEEP_FACTORY 0x8d
> +
> +/* SSP -> AP ACK about write CMD */
> +#define SSP_MSG_ACK 0x80 /* ACK from SSP to AP */
> +#define SSP_MSG_NAK 0x70 /* NAK from SSP to AP */
> +
> +struct ssp_sensorhub_info {
> + char *fw_name;
> + char *fw_crashed_name;
> + unsigned int fw_rev;
> + const u8 * const mag_table;
> + const unsigned int mag_length;
> +};
> +
> +/* ssp_msg options bit */
> +#define SSP_RW 0
> +#define SSP_INDEX 3
> +
> +#define SSP_AP2HUB_READ 0
> +#define SSP_AP2HUB_WRITE 1
> +#define SSP_HUB2AP_WRITE 2
> +#define SSP_AP2HUB_READY 3
> +#define SSP_AP2HUB_RETURN 4
> +
> +/**
> + * struct ssp_data - ssp platformdata structure
> + * @spi: spi device
> + * @sensorhub_info: info about sensorhub board specific features
> + * @wdt_timer: watchdog timer
> + * @work_wdt: watchdog work
> + * @work_firmware: firmware upgrade work queue
> + * @work_refresh: refresh work queue for reset request from MCU
> + * @shut_down: shut down flag
> + * @mcu_dump_mode: mcu dump mode for debug
> + * @time_syncing: time syncing indication flag
> + * @timestamp: previous time in ns calculated for time syncing
> + * @check_status: status table for each sensor
> + * @com_fail_cnt: communication fail count
> + * @reset_cnt: reset count
> + * @timeout_cnt: timeout count
> + * @available_sensors: available sensors seen by sensorhub (bit array)
> + * @cur_firm_rev: cached current firmware revision
> + * @last_resume_state: last AP resume/suspend state used to handle the PM
> + * state of ssp
> + * @last_ap_state: (obsolete) sleep notification for MCU
> + * @sensor_enable: sensor enable mask
> + * @delay_buf: data acquisition intervals table
> + * @batch_latency_buf: yet unknown but existing in communication protocol
> + * @batch_opt_buf: yet unknown but existing in communication protocol
> + * @accel_position: yet unknown but existing in communication protocol
> + * @mag_position: yet unknown but existing in communication protocol
> + * @fw_dl_state: firmware download state
> + * @comm_lock: lock protecting the handshake
> + * @pending_lock: lock protecting pending list and completion
> + * @mcu_reset: mcu reset line
> + * @ap_mcu_gpio: ap to mcu gpio line
> + * @mcu_ap_gpio: mcu to ap gpio line
> + * @pending_list: pending list for messages queued to be sent/read
> + * @sensor_devs: registered IIO devices table
> + * @enable_refcount: enable reference count for wdt (watchdog timer)
> + */
> +struct ssp_data {
> + struct spi_device *spi;
> + struct ssp_sensorhub_info *sensorhub_info;
> + struct timer_list wdt_timer;
> + struct work_struct work_wdt;
> + struct delayed_work work_refresh;
> +
> + bool shut_down;
> + bool mcu_dump_mode;
> + bool time_syncing;
> + int64_t timestamp;
> +
> + int check_status[SSP_SENSOR_MAX];
> +
> + unsigned int com_fail_cnt;
> + unsigned int reset_cnt;
> + unsigned int timeout_cnt;
> +
> + unsigned int available_sensors;
> + unsigned int cur_firm_rev;
> +
> + char last_resume_state;
> + char last_ap_state;
> +
> + unsigned int sensor_enable;
> + u32 delay_buf[SSP_SENSOR_MAX];
> + s32 batch_latency_buf[SSP_SENSOR_MAX];
> + s8 batch_opt_buf[SSP_SENSOR_MAX];
> +
> + int accel_position;
> + int mag_position;
> + int fw_dl_state;
> +
> + struct mutex comm_lock;
> + struct mutex pending_lock;
> +
> + int mcu_reset;
> + int ap_mcu_gpio;
> + int mcu_ap_gpio;
> +
> + struct list_head pending_list;
> +
> + struct iio_dev *sensor_devs[SSP_SENSOR_MAX];
> + atomic_t enable_refcount;
> +};
> +
> +void ssp_clean_pending_list(struct ssp_data *data);
> +
> +int ssp_command(struct ssp_data *data, char command, int arg);
> +
> +int ssp_send_instruction(struct ssp_data *data, u8 inst, u8 sensor_type,
> + u8 *send_buf, u8 length);
> +
> +int ssp_irq_msg(struct ssp_data *data);
> +
> +int ssp_get_chipid(struct ssp_data *data);
> +
> +int ssp_set_sensor_position(struct ssp_data *data);
> +
> +int ssp_set_magnetic_matrix(struct ssp_data *data);
> +
> +unsigned int ssp_get_sensor_scanning_info(struct ssp_data *data);
> +
> +unsigned int ssp_get_firmware_rev(struct ssp_data *data);
> +
> +int ssp_queue_ssp_refresh_task(struct ssp_data *data, unsigned int delay);
> +
> +#endif /* __SSP_SENSORHUB_H__ */
> diff --git a/drivers/iio/common/ssp_sensors/ssp_dev.c b/drivers/iio/common/ssp_sensors/ssp_dev.c
> new file mode 100644
> index 0000000..5e43ff3
> --- /dev/null
> +++ b/drivers/iio/common/ssp_sensors/ssp_dev.c
> @@ -0,0 +1,693 @@
> +/*
> + * Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/iio/iio.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_gpio.h>
> +#include <linux/of_platform.h>
> +#include "ssp.h"
> +
> +#define SSP_WDT_TIME 10000
> +#define SSP_LIMIT_RESET_CNT 20
> +#define SSP_LIMIT_TIMEOUT_CNT 3
> +
> +/* It is possible that it is max clk rate for version 1.0 of bootcode */
> +#define SSP_BOOT_SPI_HZ 400000
> +
> +static const u8 ssp_magnitude_table[] = {110, 85, 171, 71, 203, 195, 0, 67, 208,
> + 56, 175, 244, 206, 213, 0, 92, 250, 0, 55, 48, 189, 252, 171, 243, 13,
> + 45, 250};
> +
> +static const struct ssp_sensorhub_info ssp_rinato_info = {
> + .fw_name = "ssp_B2.fw",
> + .fw_crashed_name = "ssp_crashed.fw",
> + .fw_rev = 14052300,
> + .mag_table = ssp_magnitude_table,
> + .mag_length = ARRAY_SIZE(ssp_magnitude_table),
> +};
> +
> +static const struct ssp_sensorhub_info ssp_thermostat_info = {
> + .fw_name = "thermostat_B2.fw",
> + .fw_crashed_name = "ssp_crashed.fw",
> + .fw_rev = 14080600,
> + .mag_table = ssp_magnitude_table,
> + .mag_length = ARRAY_SIZE(ssp_magnitude_table),
> +};
> +
> +static void ssp_toggle_mcu_reset(struct ssp_data *data)
> +{
> + gpio_set_value(data->mcu_reset, 0);
> + usleep_range(1000, 1200);
> + gpio_set_value(data->mcu_reset, 1);
> + msleep(50);
> +}
> +
> +static void ssp_sync_available_sensors(struct ssp_data *data)
> +{
> + int i, ret;
> +
> + for (i = 0; i < SSP_SENSOR_MAX; ++i) {
> + if (data->available_sensors & BIT(i)) {
> + ret = ssp_enable_sensor(data, i, data->delay_buf[i]);
> + if (ret < 0) {
> + dev_err(&data->spi->dev, "Sync sensor nr: %d fail\n",
Better put the string into the second line.
> + i);
> + continue;
> + }
> + }
> + }
> +
> + ret = ssp_command(data, SSP_MSG2SSP_AP_MCU_SET_DUMPMODE,
> + data->mcu_dump_mode);
> + if (ret < 0)
> + dev_err(&data->spi->dev, "SSP_MSG2SSP_AP_MCU_SET_DUMPMODE failed\n");
And here as well.
> +}
> +
> +static void ssp_enable_mcu(struct ssp_data *data, bool enable)
> +{
> + dev_info(&data->spi->dev, "current shutdown = %d, old = %d\n", enable,
Double whitespace.
> + data->shut_down);
> +
> + if (enable && data->shut_down) {
> + data->shut_down = false;
> + enable_irq(data->spi->irq);
> + enable_irq_wake(data->spi->irq);
> + } else if (!enable && !data->shut_down) {
> + data->shut_down = true;
> + disable_irq(data->spi->irq);
> + disable_irq_wake(data->spi->irq);
> + } else {
> + dev_warn(&data->spi->dev, "current shutdown = %d, old = %d\n",
> + enable, data->shut_down);
> + }
> +}
> +
> +/*
> + * This function is the first one which communicates with the mcu so it is
> + * possible that the first attempt will fail
> + */
> +static int ssp_check_fwbl(struct ssp_data *data)
> +{
> + int retries = 0;
> +
> + while (retries++ < 5) {
> + data->cur_firm_rev = ssp_get_firmware_rev(data);
> + if (data->cur_firm_rev == SSP_INVALID_REVISION ||
> + data->cur_firm_rev == SSP_INVALID_REVISION2) {
> + dev_warn(&data->spi->dev,
> + "Invalid revision, trying %d time\n", retries);
> + } else {
> + break;
> + }
> + }
> +
> + if (data->cur_firm_rev == SSP_INVALID_REVISION ||
> + data->cur_firm_rev == SSP_INVALID_REVISION2) {
> + dev_err(&data->spi->dev, "SSP_INVALID_REVISION\n");
> + return SSP_FW_DL_STATE_NEED_TO_SCHEDULE;
> + }
> +
> + dev_info(&data->spi->dev,
> + "MCU Firm Rev : Old = %8u, New = %8u\n",
> + data->cur_firm_rev,
> + data->sensorhub_info->fw_rev);
> +
> + if (data->cur_firm_rev != data->sensorhub_info->fw_rev)
> + return SSP_FW_DL_STATE_NEED_TO_SCHEDULE;
> +
> + return SSP_FW_DL_STATE_NONE;
> +}
> +
> +static void ssp_reset_mcu(struct ssp_data *data)
> +{
> + ssp_enable_mcu(data, false);
> + ssp_clean_pending_list(data);
> + ssp_toggle_mcu_reset(data);
> + ssp_enable_mcu(data, true);
> +}
> +
> +static void ssp_wdt_work_func(struct work_struct *work)
> +{
> + struct ssp_data *data = container_of(work, struct ssp_data, work_wdt);
> +
> + dev_err(&data->spi->dev, "%s - Sensor state: 0x%x, RC: %u, CC: %u\n",
> + __func__, data->available_sensors, data->reset_cnt,
> + data->com_fail_cnt);
> +
> + ssp_reset_mcu(data);
> + data->com_fail_cnt = 0;
> + data->timeout_cnt = 0;
> +}
> +
> +static void ssp_wdt_timer_func(unsigned long ptr)
> +{
> + struct ssp_data *data = (struct ssp_data *)ptr;
> +
> + switch (data->fw_dl_state) {
> + case SSP_FW_DL_STATE_FAIL:
> + case SSP_FW_DL_STATE_DOWNLOADING:
> + case SSP_FW_DL_STATE_SYNC:
> + goto _mod;
> + }
> +
> + if (data->timeout_cnt > SSP_LIMIT_TIMEOUT_CNT ||
> + data->com_fail_cnt > SSP_LIMIT_RESET_CNT)
> + queue_work(system_power_efficient_wq, &data->work_wdt);
> +_mod:
> + mod_timer(&data->wdt_timer, jiffies + msecs_to_jiffies(SSP_WDT_TIME));
> +}
> +
> +static void ssp_enable_wdt_timer(struct ssp_data *data)
> +{
> + mod_timer(&data->wdt_timer, jiffies + msecs_to_jiffies(SSP_WDT_TIME));
> +}
> +
> +static void ssp_disable_wdt_timer(struct ssp_data *data)
> +{
> + del_timer_sync(&data->wdt_timer);
> + cancel_work_sync(&data->work_wdt);
> +}
> +
> +/**
> + * ssp_get_sensor_delay() - gets sensor data acquisition period
> + * @data: sensorhub structure
> + * @type: SSP sensor type
> + *
> + * Returns acquisition period in ms
> + */
> +u32 ssp_get_sensor_delay(struct ssp_data *data, enum ssp_sensor_type type)
> +{
> + return data->delay_buf[type];
> +}
> +EXPORT_SYMBOL(ssp_get_sensor_delay);
> +
> +/**
> + * ssp_enable_sensor() - enables data acquisition for sensor
> + * @data: sensorhub structure
> + * @type: SSP sensor type
> + * @delay: delay in ms
> + *
> + * Returns 0 or negative value in case of error
> + */
> +int ssp_enable_sensor(struct ssp_data *data, enum ssp_sensor_type type,
> + u32 delay)
> +{
> + int ret;
> + struct {
> + __le32 a;
> + __le32 b;
> + u8 c;
> + } __attribute__((__packed__)) to_send;
> +
> + to_send.a = cpu_to_le32(delay);
> + to_send.b = cpu_to_le32(data->batch_latency_buf[type]);
> + to_send.c = data->batch_opt_buf[type];
> +
> + switch (data->check_status[type]) {
> + case SSP_INITIALIZATION_STATE:
> + /* do calibration step, now just enable */
> + case SSP_ADD_SENSOR_STATE:
> + ret = ssp_send_instruction(data,
> + SSP_MSG2SSP_INST_BYPASS_SENSOR_ADD,
> + type,
> + (u8 *)&to_send, sizeof(to_send));
> + if (ret < 0) {
> + dev_err(&data->spi->dev, "Enabling sensor failed\n");
> + data->check_status[type] = SSP_NO_SENSOR_STATE;
> + goto derror;
> + }
> +
> + data->sensor_enable |= BIT(type);
> + data->check_status[type] = SSP_RUNNING_SENSOR_STATE;
> + break;
> + case SSP_RUNNING_SENSOR_STATE:
> + ret = ssp_send_instruction(data,
> + SSP_MSG2SSP_INST_CHANGE_DELAY, type,
> + (u8 *)&to_send, sizeof(to_send));
> + if (ret < 0) {
> + dev_err(&data->spi->dev,
> + "Changing sensor delay failed\n");
> + goto derror;
> + }
> + break;
> + default:
> + data->check_status[type] = SSP_ADD_SENSOR_STATE;
> + break;
> + }
> +
> + data->delay_buf[type] = delay;
> +
> + if (atomic_inc_return(&data->enable_refcount) == 1)
> + ssp_enable_wdt_timer(data);
> +
> + return 0;
> +
> +derror:
> + return ret;
> +}
> +EXPORT_SYMBOL(ssp_enable_sensor);
> +
> +/**
> + * ssp_change_delay() - changes data acquisition for sensor
> + * @data: sensorhub structure
> + * @type: SSP sensor type
> + * @delay: delay in ms
> + *
> + * Returns 0 or negative value in case of error
> + */
> +int ssp_change_delay(struct ssp_data *data, enum ssp_sensor_type type,
> + u32 delay)
> +{
> + int ret;
> + struct {
> + __le32 a;
> + __le32 b;
> + u8 c;
> + } __attribute__((__packed__)) to_send;
> +
> + to_send.a = cpu_to_le32(delay);
> + to_send.b = cpu_to_le32(data->batch_latency_buf[type]);
> + to_send.c = data->batch_opt_buf[type];
> +
> + ret = ssp_send_instruction(data, SSP_MSG2SSP_INST_CHANGE_DELAY, type,
> + (u8 *)&to_send, sizeof(to_send));
> + if (ret < 0) {
> + dev_err(&data->spi->dev, "Changing delay sensor failed\n");
Another instance that should be changed to "...sensor delay..."
> + return ret;
> + }
> +
> + data->delay_buf[type] = delay;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(ssp_change_delay);
> +
> +/**
> + * ssp_disable_sensor() - disables sensor
> + *
> + * @data: sensorhub structure
> + * @type: SSP sensor type
> + *
> + * Returns 0 or negative value in case of error
> + */
> +int ssp_disable_sensor(struct ssp_data *data, enum ssp_sensor_type type)
> +{
> + int ret;
> + __le32 command;
> +
> + if (data->sensor_enable & BIT(type)) {
> + command = cpu_to_le32(data->delay_buf[type]);
> +
> + ret = ssp_send_instruction(data,
> + SSP_MSG2SSP_INST_BYPASS_SENSOR_RM,
> + type, (u8 *)&command,
> + sizeof(command));
> + if (ret < 0) {
> + dev_err(&data->spi->dev, "Remove sensor fail\n");
> + return ret;
> + }
> +
> + data->sensor_enable &= ~BIT(type);
> + }
> +
> + data->check_status[type] = SSP_ADD_SENSOR_STATE;
> +
> + if (atomic_dec_and_test(&data->enable_refcount))
> + ssp_disable_wdt_timer(data);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(ssp_disable_sensor);
> +
> +static irqreturn_t sensordata_irq_thread_fn(int irq, void *dev_id)
Missing prefix.
> +{
> + struct ssp_data *data = dev_id;
> +
> + ssp_irq_msg(data);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int ssp_initialize_mcu(struct ssp_data *data)
> +{
> + int ret;
> +
> + ssp_clean_pending_list(data);
> +
> + ret = ssp_get_chipid(data);
> + if (ret != SSP_DEVICE_ID) {
> + dev_err(&data->spi->dev, "%s - MCU %s ret = %d\n", __func__,
> + ret < 0 ? "is not working" : "identification failed",
> + ret);
> + return ret < 0 ? ret : -ENODEV;
> + }
> +
> + dev_info(&data->spi->dev, "MCU device ID = %d\n", ret);
> +
> + ret = ssp_set_sensor_position(data);
> + if (ret < 0) {
> + dev_err(&data->spi->dev, "ssp_set_sensor_position failed\n");
> + return ret;
> + }
> +
> + ret = ssp_set_magnetic_matrix(data);
> + if (ret < 0) {
> + dev_err(&data->spi->dev,
> + "%s - ssp_set_magnetic_matrix failed\n", __func__);
> + return ret;
> + }
> +
> + data->available_sensors = ssp_get_sensor_scanning_info(data);
> + if (data->available_sensors == 0) {
> + dev_err(&data->spi->dev,
> + "%s - ssp_get_sensor_scanning_info failed\n", __func__);
> + return -EIO;
> + }
> +
> + data->cur_firm_rev = ssp_get_firmware_rev(data);
> + dev_info(&data->spi->dev, "MCU Firm Rev : New = %8u\n",
> + data->cur_firm_rev);
> +
> + return ssp_command(data, SSP_MSG2SSP_AP_MCU_DUMP_CHECK, 0);
> +}
> +
> +static void ssp_refresh_task(struct work_struct *work)
> +{
> + struct ssp_data *data = container_of((struct delayed_work *)work,
> + struct ssp_data, work_refresh);
> +
> + dev_info(&data->spi->dev, "refreshing\n");
> +
> + data->reset_cnt++;
> +
> + if (ssp_initialize_mcu(data) >= 0) {
> + ssp_sync_available_sensors(data);
> + if (data->last_ap_state != 0)
> + ssp_command(data, data->last_ap_state, 0);
> +
> + if (data->last_resume_state != 0)
> + ssp_command(data, data->last_resume_state, 0);
> +
> + data->timeout_cnt = 0;
> + data->com_fail_cnt = 0;
> + }
> +}
> +
> +int ssp_queue_ssp_refresh_task(struct ssp_data *data, unsigned int delay)
> +{
> + cancel_delayed_work_sync(&data->work_refresh);
> +
> + return queue_delayed_work(system_power_efficient_wq,
> + &data->work_refresh,
> + msecs_to_jiffies(delay));
> +}
> +
> +#ifdef CONFIG_OF
> +static struct of_device_id ssp_of_match[] = {
> + {
> + .compatible = "samsung,sensorhub-rinato",
> + .data = &ssp_rinato_info,
> + }, {
> + .compatible = "samsung,sensorhub-thermostat",
> + .data = &ssp_thermostat_info,
> + },
> +};
> +MODULE_DEVICE_TABLE(of, ssp_of_match);
> +
> +static struct ssp_data *ssp_parse_dt(struct device *dev)
> +{
> + int ret;
> + struct ssp_data *data;
> + struct device_node *node = dev->of_node;
> + const struct of_device_id *match;
> +
> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return NULL;
> +
> + data->mcu_ap_gpio = of_get_named_gpio(node, "mcu-ap-gpio", 0);
> + if (data->mcu_ap_gpio < 0)
> + goto err_free_pd;
> +
> + data->ap_mcu_gpio = of_get_named_gpio(node, "ap-mcu-gpio", 0);
> + if (data->ap_mcu_gpio < 0)
> + goto err_free_pd;
> +
> + data->mcu_reset = of_get_named_gpio(node, "mcu-reset", 0);
> + if (data->mcu_reset < 0)
> + goto err_free_pd;
> +
> + ret = devm_gpio_request_one(dev, data->ap_mcu_gpio, GPIOF_OUT_INIT_HIGH,
> + "ap-mcu-gpio");
> + if (ret)
> + goto err_free_pd;
> +
> + ret = devm_gpio_request_one(dev, data->mcu_reset, GPIOF_OUT_INIT_HIGH,
> + "mcu-reset");
> + if (ret)
> + goto err_ap_mcu;
> +
> + match = of_match_node(ssp_of_match, node);
> + if (!match)
> + goto err_mcu_reset;
> +
> + data->sensorhub_info = (struct ssp_sensorhub_info *)match->data;
> +
> + dev_set_drvdata(dev, data);
> +
> + ret = of_platform_populate(node, NULL, NULL, dev);
> + if (ret < 0) {
> + dev_err(dev, "of_platform_populate fail\n");
> + goto err_mcu_reset;
> + }
> +
> + return data;
> +
> +err_mcu_reset:
> + devm_gpio_free(dev, data->mcu_reset);
> +err_ap_mcu:
> + devm_gpio_free(dev, data->ap_mcu_gpio);
> +err_free_pd:
> + devm_kfree(dev, data);
> + return NULL;
> +}
> +#else
> +static struct ssp_data *ssp_parse_dt(struct platform_device *pdev)
> +{
> + return NULL;
> +}
> +#endif
> +
> +/**
> + * ssp_register_consumer() - registers iio consumer in ssp framework
> + *
> + * @indio_dev: consumer iio device
> + * @type: ssp sensor type
> + */
> +void ssp_register_consumer(struct iio_dev *indio_dev, enum ssp_sensor_type type)
> +{
> + struct ssp_data *data = dev_get_drvdata(indio_dev->dev.parent->parent);
> +
> + data->sensor_devs[type] = indio_dev;
> +}
> +EXPORT_SYMBOL(ssp_register_consumer);
> +
> +static int ssp_probe(struct spi_device *spi)
> +{
> + int ret, i;
> + struct ssp_data *data;
> +
> + data = ssp_parse_dt(&spi->dev);
> + if (!data) {
> + dev_err(&spi->dev, "Failed to find platform data\n");
> + return -ENODEV;
> + }
> +
> + spi->mode = SPI_MODE_1;
> + ret = spi_setup(spi);
> + if (ret < 0) {
> + dev_err(&spi->dev, "Failed to setup spi in %s\n", __func__);
Hmm, now you dropped __func__ in the error message further up, and added it here.
My intention was to be consistent. Maybe drop it here, again.
> + return ret;
> + }
> +
> + data->fw_dl_state = SSP_FW_DL_STATE_NONE;
> + data->spi = spi;
> + spi_set_drvdata(spi, data);
> +
> + mutex_init(&data->comm_lock);
> + mutex_init(&data->pending_lock);
> +
> + for (i = 0; i < SSP_SENSOR_MAX; ++i) {
> + data->delay_buf[i] = SSP_DEFAULT_POLLING_DELAY;
> + data->batch_latency_buf[i] = 0;
> + data->batch_opt_buf[i] = 0;
> + data->check_status[i] = SSP_INITIALIZATION_STATE;
> + }
> +
> + data->delay_buf[SSP_BIO_HRM_LIB] = 100;
> +
> + data->time_syncing = true;
> +
> + INIT_LIST_HEAD(&data->pending_list);
> +
> + atomic_set(&data->enable_refcount, 0);
> +
> + INIT_WORK(&data->work_wdt, ssp_wdt_work_func);
> + INIT_DELAYED_WORK(&data->work_refresh, ssp_refresh_task);
> +
> + setup_timer(&data->wdt_timer, ssp_wdt_timer_func, (unsigned long)data);
> +
> + ret = request_threaded_irq(data->spi->irq, NULL,
> + sensordata_irq_thread_fn,
> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> + "SSP_Int", data);
> + if (ret < 0) {
> + dev_err(&spi->dev, "Irq request fail\n");
> + goto err_setup_irq;
> + }
> +
> + /* Let's start with enabled one so irq balance could be ok */
> + data->shut_down = false;
> +
> + /* just to avoid unbalanced irq set wake up */
> + enable_irq_wake(data->spi->irq);
> +
> + data->fw_dl_state = ssp_check_fwbl(data);
> + if (data->fw_dl_state == SSP_FW_DL_STATE_NONE) {
> + ret = ssp_initialize_mcu(data);
> + if (ret < 0) {
> + dev_err(&spi->dev, "Initialize_mcu failed\n");
> + goto err_read_reg;
> + }
> + } else {
> + dev_err(&spi->dev, "Firmware version not supported\n");
> + ret = -EPERM;
> + goto err_read_reg;
> + }
> +
> + return 0;
> +
> +err_read_reg:
> + free_irq(data->spi->irq, data);
> +err_setup_irq:
> + mutex_destroy(&data->pending_lock);
> + mutex_destroy(&data->comm_lock);
> +
> + dev_err(&spi->dev, "Probe failed!\n");
> +
> + return ret;
> +}
> +
> +static int ssp_remove(struct spi_device *spi)
> +{
> + struct ssp_data *data = spi_get_drvdata(spi);
> +
> + if (ssp_command(data, SSP_MSG2SSP_AP_STATUS_SHUTDOWN, 0) < 0)
> + dev_err(&data->spi->dev, "SSP_MSG2SSP_AP_STATUS_SHUTDOWN failed\n");
Put string into new line.
> +
> + ssp_enable_mcu(data, false);
> + ssp_disable_wdt_timer(data);
> +
> + ssp_clean_pending_list(data);
> +
> + free_irq(data->spi->irq, data);
> +
> + del_timer_sync(&data->wdt_timer);
> + cancel_work_sync(&data->work_wdt);
> +
> + mutex_destroy(&data->comm_lock);
> + mutex_destroy(&data->pending_lock);
> +
> +#ifdef CONFIG_OF
> + of_platform_depopulate(&spi->dev);
> +#endif
> +
> + return 0;
> +}
> +
> +static int ssp_suspend(struct device *dev)
> +{
> + int ret;
> + struct ssp_data *data = spi_get_drvdata(to_spi_device(dev));
> +
> + data->last_resume_state = SSP_MSG2SSP_AP_STATUS_SUSPEND;
> +
> + if (atomic_read(&data->enable_refcount) > 0)
> + ssp_disable_wdt_timer(data);
> +
> + ret = ssp_command(data, SSP_MSG2SSP_AP_STATUS_SUSPEND, 0);
> + if (ret < 0) {
> + dev_err(&data->spi->dev,
> + "%s SSP_MSG2SSP_AP_STATUS_SUSPEND failed\n", __func__);
> +
> + ssp_enable_wdt_timer(data);
> + return ret;
> + }
> +
> + data->time_syncing = false;
> + disable_irq(data->spi->irq);
> +
> + return 0;
> +}
> +
> +static int ssp_resume(struct device *dev)
> +{
> + int ret;
> + struct ssp_data *data = spi_get_drvdata(to_spi_device(dev));
> +
> + enable_irq(data->spi->irq);
> +
> + if (atomic_read(&data->enable_refcount) > 0)
> + ssp_enable_wdt_timer(data);
> +
> + ret = ssp_command(data, SSP_MSG2SSP_AP_STATUS_RESUME, 0);
> + if (ret < 0) {
> + dev_err(&data->spi->dev,
> + "%s SSP_MSG2SSP_AP_STATUS_RESUME failed\n", __func__);
> + ssp_disable_wdt_timer(data);
> + return ret;
> + }
> +
> + /* timesyncing is set by MCU */
> +
> + data->last_resume_state = SSP_MSG2SSP_AP_STATUS_RESUME;
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops ssp_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(ssp_suspend, ssp_resume)
> +};
> +
> +static struct spi_driver ssp_driver = {
> + .probe = ssp_probe,
> + .remove = ssp_remove,
> + .driver = {
> + .pm = &ssp_pm_ops,
> + .bus = &spi_bus_type,
> + .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(ssp_of_match),
> + .name = "sensorhub"
> + },
> +};
> +
> +module_spi_driver(ssp_driver);
> +
> +MODULE_DESCRIPTION("ssp sensorhub driver");
> +MODULE_AUTHOR("Samsung Electronics");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/iio/common/ssp_sensors/ssp_spi.c b/drivers/iio/common/ssp_sensors/ssp_spi.c
> new file mode 100644
> index 0000000..44b99bc
> --- /dev/null
> +++ b/drivers/iio/common/ssp_sensors/ssp_spi.c
> @@ -0,0 +1,644 @@
> +/*
> + * Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include "ssp.h"
> +
> +#define SSP_DEV (&data->spi->dev)
> +#define SSP_GET_MESSAGE_TYPE(data) (data & (3 << SSP_RW))
> +
> +/*
> + * SSP -> AP Instruction
> + * They tell what packet type can be expected. In the future there will
> + * be less of them. BYPASS means common sensor packets with accel, gyro,
> + * hrm etc. data. LIBRARY and META are mock-up's for now.
> + */
> +#define SSP_MSG2AP_INST_BYPASS_DATA 0x37
> +#define SSP_MSG2AP_INST_LIBRARY_DATA 0x01
> +#define SSP_MSG2AP_INST_DEBUG_DATA 0x03
> +#define SSP_MSG2AP_INST_BIG_DATA 0x04
> +#define SSP_MSG2AP_INST_META_DATA 0x05
> +#define SSP_MSG2AP_INST_TIME_SYNC 0x06
> +#define SSP_MSG2AP_INST_RESET 0x07
> +
> +#define SSP_UNIMPLEMENTED -1
> +
> +struct ssp_msg_header {
> + u8 cmd;
> + __le16 length;
> + __le16 options;
> + __le32 data;
> +} __attribute__((__packed__));
> +
> +struct ssp_msg {
> + u16 length;
> + u16 options;
> + struct list_head list;
> + struct completion *done;
> + struct ssp_msg_header *h;
> + char *buffer;
> +};
> +
> +static const int ssp_offset_map[SSP_SENSOR_MAX] = {
> + [SSP_ACCELEROMETER_SENSOR] = SSP_ACCELEROMETER_SIZE +
> + SSP_TIME_SIZE,
> + [SSP_GYROSCOPE_SENSOR] = SSP_GYROSCOPE_SIZE +
> + SSP_TIME_SIZE,
> + [SSP_GEOMAGNETIC_UNCALIB_SENSOR] = SSP_UNIMPLEMENTED,
> + [SSP_GEOMAGNETIC_RAW] = SSP_UNIMPLEMENTED,
> + [SSP_GEOMAGNETIC_SENSOR] = SSP_UNIMPLEMENTED,
> + [SSP_PRESSURE_SENSOR] = SSP_UNIMPLEMENTED,
> + [SSP_GESTURE_SENSOR] = SSP_UNIMPLEMENTED,
> + [SSP_PROXIMITY_SENSOR] = SSP_UNIMPLEMENTED,
> + [SSP_TEMPERATURE_HUMIDITY_SENSOR] = SSP_UNIMPLEMENTED,
> + [SSP_LIGHT_SENSOR] = SSP_UNIMPLEMENTED,
> + [SSP_PROXIMITY_RAW] = SSP_UNIMPLEMENTED,
> + [SSP_ORIENTATION_SENSOR] = SSP_UNIMPLEMENTED,
> + [SSP_STEP_DETECTOR] = SSP_UNIMPLEMENTED,
> + [SSP_SIG_MOTION_SENSOR] = SSP_UNIMPLEMENTED,
> + [SSP_GYRO_UNCALIB_SENSOR] = SSP_UNIMPLEMENTED,
> + [SSP_GAME_ROTATION_VECTOR] = SSP_UNIMPLEMENTED,
> + [SSP_ROTATION_VECTOR] = SSP_UNIMPLEMENTED,
> + [SSP_STEP_COUNTER] = SSP_UNIMPLEMENTED,
> + [SSP_BIO_HRM_RAW] = SSP_BIO_HRM_RAW_SIZE +
> + SSP_TIME_SIZE,
> + [SSP_BIO_HRM_RAW_FAC] = SSP_BIO_HRM_RAW_FAC_SIZE +
> + SSP_TIME_SIZE,
> + [SSP_BIO_HRM_LIB] = SSP_BIO_HRM_LIB_SIZE +
> + SSP_TIME_SIZE,
> +};
> +
> +#define SSP_HEADER_SIZE (sizeof(struct ssp_msg_header))
> +#define SSP_HEADER_SIZE_ALIGNED (ALIGN(SSP_HEADER_SIZE, 4))
> +
> +static struct ssp_msg *ssp_create_msg(u8 cmd, u16 len, u16 opt, u32 data)
> +{
> + struct ssp_msg_header h;
> + struct ssp_msg *msg;
> +
> + msg = kzalloc(sizeof(*msg), GFP_KERNEL);
> + if (!msg)
> + return NULL;
> +
> + h.cmd = cmd;
> + h.length = cpu_to_le16(len);
> + h.options = cpu_to_le16(opt);
> + h.data = cpu_to_le32(data);
> +
> + msg->buffer = kzalloc(SSP_HEADER_SIZE_ALIGNED + len,
> + GFP_KERNEL | GFP_DMA);
> + if (!msg->buffer) {
> + kfree(msg);
> + return NULL;
> + }
> +
> + msg->length = len;
> + msg->options = opt;
> +
> + memcpy(msg->buffer, &h, SSP_HEADER_SIZE);
> +
> + return msg;
> +}
> +
> +static inline void ssp_fill_buffer(struct ssp_msg *m, unsigned int offset,
> + const void *src, unsigned int len)
> +{
> + memcpy(&m->buffer[SSP_HEADER_SIZE_ALIGNED + offset], src, len);
> +}
> +
> +static inline void ssp_get_buffer(struct ssp_msg *m, unsigned int offset,
> + void *dest, unsigned int len)
> +{
> + memcpy(dest, &m->buffer[SSP_HEADER_SIZE_ALIGNED + offset], len);
> +}
> +
> +#define ssp_get_buffer_AT_INDEX(m, index) \
> + (m->buffer[SSP_HEADER_SIZE_ALIGNED + index])
> +#define SSP_SET_BUFFER_AT_INDEX(m, index, val) \
> + (m->buffer[SSP_HEADER_SIZE_ALIGNED + index] = val)
> +
> +static void ssp_clean_msg(struct ssp_msg *m)
> +{
> + kfree(m->buffer);
> + kfree(m);
> +}
> +
> +static int ssp_print_mcu_debug(char *data_frame, int *data_index,
> + int received_len)
> +{
> + int length = data_frame[(*data_index)++];
> +
> + if (length > received_len - *data_index || length <= 0) {
> + ssp_dbg("[SSP]: MSG From MCU-invalid debug length(%d/%d)\n",
> + length, received_len);
> + return length ? length : -EPROTO;
> + }
> +
> + ssp_dbg("[SSP]: MSG From MCU - %s\n", &data_frame[*data_index]);
> +
> + *data_index += length;
> +
> + return 0;
> +}
> +
> +/*
> + * It was designed that way - additional lines to some kind of handshake,
> + * please do not ask why - only the firmware guy can know it.
> + */
> +static int ssp_check_lines(struct ssp_data *data, bool state)
> +{
> + int delay_cnt = 0;
> +
> + gpio_set_value_cansleep(data->ap_mcu_gpio, state);
> +
> + while (gpio_get_value_cansleep(data->mcu_ap_gpio) != state) {
> + usleep_range(3000, 3500);
> +
> + if (data->shut_down || delay_cnt++ > 500) {
> + dev_err(SSP_DEV, "%s:timeout, hw ack wait fail %d\n",
> + __func__, state);
> +
> + if (!state)
> + gpio_set_value_cansleep(data->ap_mcu_gpio, 1);
> +
> + return -ETIMEDOUT;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int ssp_do_transfer(struct ssp_data *data, struct ssp_msg *msg,
> + struct completion *done, int timeout)
> +{
> + int status;
> + /*
> + * check if this is a short one way message or the whole transfer has
> + * second part after an interrupt
> + */
> + const bool use_no_irq = msg->length == 0;
> +
> + if (data->shut_down)
> + return -EPERM;
> +
> + msg->done = done;
> +
> + mutex_lock(&data->comm_lock);
> +
> + status = ssp_check_lines(data, false);
> + if (status < 0)
> + goto _error_locked;
> +
> + status = spi_write(data->spi, msg->buffer, SSP_HEADER_SIZE);
> + if (status < 0) {
> + gpio_set_value_cansleep(data->ap_mcu_gpio, 1);
> + dev_err(SSP_DEV, "%s spi_write fail\n", __func__);
> + goto _error_locked;
> + }
> +
> + if (!use_no_irq) {
> + mutex_lock(&data->pending_lock);
> + list_add_tail(&msg->list, &data->pending_list);
> + mutex_unlock(&data->pending_lock);
> + }
> +
> + status = ssp_check_lines(data, true);
> + if (status < 0) {
> + if (!use_no_irq) {
> + mutex_lock(&data->pending_lock);
> + list_del(&msg->list);
> + mutex_unlock(&data->pending_lock);
> + }
> + goto _error_locked;
> + }
> +
> + mutex_unlock(&data->comm_lock);
> +
> + if (!use_no_irq && done)
> + if (wait_for_completion_timeout(done,
> + msecs_to_jiffies(timeout)) ==
> + 0) {
> + mutex_lock(&data->pending_lock);
> + list_del(&msg->list);
> + mutex_unlock(&data->pending_lock);
> +
> + data->timeout_cnt++;
> + return -ETIMEDOUT;
> + }
> +
> + return 0;
> +
> +_error_locked:
> + mutex_unlock(&data->comm_lock);
> + data->timeout_cnt++;
> + return status;
> +}
> +
> +static inline int ssp_spi_sync_command(struct ssp_data *data,
> + struct ssp_msg *msg)
> +{
> + return ssp_do_transfer(data, msg, NULL, 0);
> +}
> +
> +static int ssp_spi_sync(struct ssp_data *data, struct ssp_msg *msg,
> + int timeout)
> +{
> + DECLARE_COMPLETION_ONSTACK(done);
> +
> + if (WARN_ON(!msg->length))
> + return -EPERM;
> +
> + return ssp_do_transfer(data, msg, &done, timeout);
> +}
> +
> +static int ssp_handle_big_data(struct ssp_data *data, char *dataframe, int *idx)
> +{
> + /* mock-up, it will be changed with adding another sensor types */
> + *idx += 8;
> + return 0;
> +}
> +
> +static int ssp_parse_dataframe(struct ssp_data *data, char *dataframe, int len)
> +{
> + int idx, sd;
> + struct timespec ts;
> + struct ssp_sensor_data *spd;
> + struct iio_dev **indio_devs = data->sensor_devs;
> +
> + getnstimeofday(&ts);
> +
> + for (idx = 0; idx < len;) {
> + switch (dataframe[idx++]) {
> + case SSP_MSG2AP_INST_BYPASS_DATA:
> + sd = dataframe[idx++];
> + if (sd < 0 || sd >= SSP_SENSOR_MAX) {
> + dev_err(SSP_DEV,
> + "Mcu data frame1 error %d\n", sd);
> + return -EPROTO;
> + }
> +
> + if (indio_devs[sd]) {
> + spd = iio_priv(indio_devs[sd]);
> + if (spd->process_data)
> + spd->process_data(indio_devs[sd],
> + &dataframe[idx],
> + data->timestamp);
Indentation should be adjusted.
> + } else {
> + dev_err(SSP_DEV, "no client for frame\n");
> + }
> +
> + idx += ssp_offset_map[sd];
> + break;
> + case SSP_MSG2AP_INST_DEBUG_DATA:
> + sd = ssp_print_mcu_debug(dataframe, &idx, len);
> + if (sd) {
> + dev_err(SSP_DEV,
> + "Mcu data frame3 error %d\n", sd);
> + return sd;
> + }
> + break;
> + case SSP_MSG2AP_INST_LIBRARY_DATA:
> + idx += len;
> + break;
> + case SSP_MSG2AP_INST_BIG_DATA:
> + ssp_handle_big_data(data, dataframe, &idx);
> + break;
> + case SSP_MSG2AP_INST_TIME_SYNC:
> + data->time_syncing = true;
> + break;
> + case SSP_MSG2AP_INST_RESET:
> + ssp_queue_ssp_refresh_task(data, 0);
> + break;
> + }
> + }
> +
> + if (data->time_syncing)
> + data->timestamp = ts.tv_sec * 1000000000ULL + ts.tv_nsec;
> +
> + return 0;
> +}
> +
> +/* threaded irq */
> +int ssp_irq_msg(struct ssp_data *data)
> +{
> + bool found = false;
> + char *buffer;
> + __le16 *temp_buf;
> + u8 msg_type;
> + int ret;
> + u16 length, msg_options;
> + struct ssp_msg *msg, *n;
> +
> + temp_buf = kmalloc(4, GFP_KERNEL | GFP_DMA);
> + if (!temp_buf)
> + return -ENOMEM;
> +
> + ret = spi_read(data->spi, temp_buf, 4);
> + if (ret < 0) {
> + dev_err(SSP_DEV, "header read fail\n");
> + kfree(temp_buf);
> + return ret;
> + }
> +
> + length = le16_to_cpu(temp_buf[1]);
> + msg_options = le16_to_cpu(temp_buf[0]);
> +
> + kfree(temp_buf);
> +
> + if (length == 0) {
> + dev_err(SSP_DEV, "length received from mcu is 0\n");
> + return -EINVAL;
> + }
> +
> + msg_type = SSP_GET_MESSAGE_TYPE(msg_options);
> +
> + switch (msg_type) {
> + case SSP_AP2HUB_READ:
> + case SSP_AP2HUB_WRITE:
> + /*
> + * this is a small list, a few elements - the packets can be
> + * received with no order
> + */
> + mutex_lock(&data->pending_lock);
> + list_for_each_entry_safe(msg, n, &data->pending_list, list) {
> + if (msg->options == msg_options) {
> + list_del(&msg->list);
> + found = true;
> + break;
> + }
> + }
> +
> + if (!found) {
> + /*
> + * here can be implemented dead messages handling
> + * but the slave should not send such ones - it is to
> + * check but let's handle this
> + */
> + buffer = kmalloc(length, GFP_KERNEL | GFP_DMA);
> + if (!buffer) {
> + ret = -ENOMEM;
> + goto _unlock;
> + }
> +
> + /* got dead packet so it is always an error */
> + ret = spi_read(data->spi, buffer, length);
> + if (ret >= 0)
> + ret = -EPROTO;
> +
> + kfree(buffer);
> +
> + dev_err(SSP_DEV, "No match error %x\n",
> + msg_options);
> +
> + goto _unlock;
> + }
> +
> + if (msg_type == SSP_AP2HUB_READ)
> + ret = spi_read(data->spi,
> + &msg->buffer[SSP_HEADER_SIZE_ALIGNED],
> + msg->length);
> +
> + if (msg_type == SSP_AP2HUB_WRITE) {
> + ret = spi_write(data->spi,
> + &msg->buffer[SSP_HEADER_SIZE_ALIGNED],
> + msg->length);
> + if (msg_options & SSP_AP2HUB_RETURN) {
> + msg->options =
> + SSP_AP2HUB_READ | SSP_AP2HUB_RETURN;
> + msg->length = 1;
> +
> + list_add_tail(&msg->list, &data->pending_list);
> + goto _unlock;
> + }
> + }
> +
> + if (msg->done)
> + if (!completion_done(msg->done))
> + complete(msg->done);
> +_unlock:
> + mutex_unlock(&data->pending_lock);
> + break;
> + case SSP_HUB2AP_WRITE:
> + buffer = kzalloc(length, GFP_KERNEL | GFP_DMA);
> + if (!buffer)
> + return -ENOMEM;
> +
> + ret = spi_read(data->spi, buffer, length);
> + if (ret < 0) {
> + dev_err(SSP_DEV, "spi read fail\n");
> + kfree(buffer);
> + break;
> + }
> +
> + ret = ssp_parse_dataframe(data, buffer, length);
> +
> + kfree(buffer);
> + break;
> +
> + default:
> + dev_err(SSP_DEV, "unknown msg type\n");
> + return -EPROTO;
> + }
> +
> + return ret;
> +}
> +
> +void ssp_clean_pending_list(struct ssp_data *data)
> +{
> + struct ssp_msg *msg, *n;
> +
> + mutex_lock(&data->pending_lock);
> + list_for_each_entry_safe(msg, n, &data->pending_list, list) {
> + list_del(&msg->list);
> +
> + if (msg->done)
> + if (!completion_done(msg->done))
> + complete(msg->done);
> + }
> + mutex_unlock(&data->pending_lock);
> +}
> +
> +int ssp_command(struct ssp_data *data, char command, int arg)
> +{
> + int ret;
> + struct ssp_msg *msg;
> +
> + msg = ssp_create_msg(command, 0, SSP_AP2HUB_WRITE, arg);
> + if (!msg)
> + return -ENOMEM;
> +
> + ssp_dbg("%s - command 0x%x %d\n", __func__, command, arg);
> +
> + ret = ssp_spi_sync_command(data, msg);
> + ssp_clean_msg(msg);
> +
> + return ret;
> +}
> +
> +int ssp_send_instruction(struct ssp_data *data, u8 inst, u8 sensor_type,
> + u8 *send_buf, u8 length)
> +{
> + int ret;
> + struct ssp_msg *msg;
> +
> + if (data->fw_dl_state == SSP_FW_DL_STATE_DOWNLOADING) {
> + dev_err(SSP_DEV, "%s - Skip Inst! DL state = %d\n",
> + __func__, data->fw_dl_state);
> + return -EBUSY;
> + } else if (!(data->available_sensors & BIT(sensor_type)) &&
> + (inst <= SSP_MSG2SSP_INST_CHANGE_DELAY)) {
> + dev_err(SSP_DEV, "%s - Bypass Inst Skip! - %u\n",
> + __func__, sensor_type);
> + return -EIO; /* just fail */
> + }
> +
> + msg = ssp_create_msg(inst, length + 2, SSP_AP2HUB_WRITE, 0);
> + if (!msg)
> + return -ENOMEM;
> +
> + ssp_fill_buffer(msg, 0, &sensor_type, 1);
> + ssp_fill_buffer(msg, 1, send_buf, length);
> +
> + ssp_dbg("%s - Inst = 0x%x, Sensor Type = 0x%x, data = %u\n",
> + __func__, inst, sensor_type, send_buf[1]);
> +
> + ret = ssp_spi_sync(data, msg, 1000);
> + ssp_clean_msg(msg);
> +
> + return ret;
> +}
> +
> +int ssp_get_chipid(struct ssp_data *data)
> +{
> + int ret;
> + char buffer;
> + struct ssp_msg *msg;
> +
> + msg = ssp_create_msg(SSP_MSG2SSP_AP_WHOAMI, 1, SSP_AP2HUB_READ, 0);
> + if (!msg)
> + return -ENOMEM;
> +
> + ret = ssp_spi_sync(data, msg, 1000);
> +
> + buffer = ssp_get_buffer_AT_INDEX(msg, 0);
> +
> + ssp_clean_msg(msg);
> +
> + return ret < 0 ? ret : buffer;
> +}
> +
> +int ssp_set_sensor_position(struct ssp_data *data)
> +{
> + int ret;
> +
> + struct ssp_msg *msg = ssp_create_msg(SSP_MSG2SSP_AP_SENSOR_FORMATION, 3,
> + SSP_AP2HUB_WRITE, 0);
Improve indentation.
> + if (!msg)
> + return -ENOMEM;
> +
> + /*
> + * this needs some clarification with the protocol, default they will
> + * be 0 so it is ok
> + */
> + SSP_SET_BUFFER_AT_INDEX(msg, 0, data->accel_position);
> + SSP_SET_BUFFER_AT_INDEX(msg, 1, data->accel_position);
> + SSP_SET_BUFFER_AT_INDEX(msg, 2, data->mag_position);
> +
> + ret = ssp_spi_sync(data, msg, 1000);
> + if (ret < 0) {
> + dev_err(SSP_DEV, "%s - fail to ssp_set_sensor_position %d\n",
> + __func__, ret);
> + } else {
> + dev_info(SSP_DEV,
> + "Sensor Position A : %u, G : %u, M: %u, P: %u\n",
> + data->accel_position, data->accel_position,
> + data->mag_position, 0);
> + }
> +
> + ssp_clean_msg(msg);
> +
> + return ret;
> +}
> +
> +int ssp_set_magnetic_matrix(struct ssp_data *data)
> +{
> + int ret;
> + struct ssp_msg *msg;
> +
> + msg = ssp_create_msg(SSP_MSG2SSP_AP_SET_MAGNETIC_STATIC_MATRIX,
> + data->sensorhub_info->mag_length, SSP_AP2HUB_WRITE,
> + 0);
> + if (!msg)
> + return -ENOMEM;
> +
> + ssp_fill_buffer(msg, 0, data->sensorhub_info->mag_table,
> + data->sensorhub_info->mag_length);
> +
> + ret = ssp_spi_sync(data, msg, 1000);
> + ssp_clean_msg(msg);
> +
> + return ret;
> +}
> +
> +unsigned int ssp_get_sensor_scanning_info(struct ssp_data *data)
> +{
> + int ret;
> + __le32 result;
> + u32 cpu_result = 0;
> +
> + struct ssp_msg *msg = ssp_create_msg(SSP_MSG2SSP_AP_SENSOR_SCANNING, 4,
> + SSP_AP2HUB_READ, 0);
> + if (!msg)
> + return 0;
> +
> + ret = ssp_spi_sync(data, msg, 1000);
> + if (ret < 0) {
> + dev_err(SSP_DEV, "%s - spi read fail %d\n", __func__, ret);
> + goto _exit;
> + }
> +
> + ssp_get_buffer(msg, 0, &result, 4);
> + cpu_result = le32_to_cpu(result);
> +
> + dev_info(SSP_DEV, "%s state: 0x%08x\n", __func__, cpu_result);
> +
> +_exit:
> + ssp_clean_msg(msg);
> + return cpu_result;
> +}
> +
> +unsigned int ssp_get_firmware_rev(struct ssp_data *data)
> +{
> + int ret;
> + __le32 result;
> +
> + struct ssp_msg *msg = ssp_create_msg(SSP_MSG2SSP_AP_FIRMWARE_REV, 4,
> + SSP_AP2HUB_READ, 0);
Improve indentation.
> + if (!msg)
> + return SSP_INVALID_REVISION;
> +
> + ret = ssp_spi_sync(data, msg, 1000);
> + ssp_get_buffer(msg, 0, &result, 4);
> + if (ret < 0) {
> + dev_err(SSP_DEV, "%s - transfer fail %d\n", __func__, ret);
> + ret = SSP_INVALID_REVISION;
> + goto _exit;
> + }
> +
> + ret = le32_to_cpu(result);
> +
> +_exit:
> + ssp_clean_msg(msg);
> + return ret;
> +}
> diff --git a/include/linux/iio/common/ssp_sensors.h b/include/linux/iio/common/ssp_sensors.h
> new file mode 100644
> index 0000000..c6001e9
> --- /dev/null
> +++ b/include/linux/iio/common/ssp_sensors.h
> @@ -0,0 +1,80 @@
> +/*
> + * Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +#ifndef _SSP_SENSORS_H_
> +#define _SSP_SENSORS_H_
> +
> +#include <linux/iio/iio.h>
> +
> +#define SSP_TIME_SIZE 4
> +#define SSP_ACCELEROMETER_SIZE 6
> +#define SSP_GYROSCOPE_SIZE 6
> +#define SSP_BIO_HRM_RAW_SIZE 8
> +#define SSP_BIO_HRM_RAW_FAC_SIZE 36
> +#define SSP_BIO_HRM_LIB_SIZE 8
> +
> +/**
> + * enum ssp_sensor_type - SSP sensor type
> + */
> +enum ssp_sensor_type {
> + SSP_ACCELEROMETER_SENSOR = 0,
> + SSP_GYROSCOPE_SENSOR,
> + SSP_GEOMAGNETIC_UNCALIB_SENSOR,
> + SSP_GEOMAGNETIC_RAW,
> + SSP_GEOMAGNETIC_SENSOR,
> + SSP_PRESSURE_SENSOR,
> + SSP_GESTURE_SENSOR,
> + SSP_PROXIMITY_SENSOR,
> + SSP_TEMPERATURE_HUMIDITY_SENSOR,
> + SSP_LIGHT_SENSOR,
> + SSP_PROXIMITY_RAW,
> + SSP_ORIENTATION_SENSOR,
> + SSP_STEP_DETECTOR,
> + SSP_SIG_MOTION_SENSOR,
> + SSP_GYRO_UNCALIB_SENSOR,
> + SSP_GAME_ROTATION_VECTOR,
> + SSP_ROTATION_VECTOR,
> + SSP_STEP_COUNTER,
> + SSP_BIO_HRM_RAW,
> + SSP_BIO_HRM_RAW_FAC,
> + SSP_BIO_HRM_LIB,
> + SSP_SENSOR_MAX,
> +};
> +
> +struct ssp_data;
> +
> +/**
> + * struct ssp_sensor_data - Sensor object
> + * @process_data: Callback to feed sensor data.
> + * @type: Used sensor type.
> + */
> +struct ssp_sensor_data {
> + int (*process_data)(struct iio_dev *indio_dev, void *buf,
> + int64_t timestamp);
> + enum ssp_sensor_type type;
> +};
> +
> +void ssp_register_consumer(struct iio_dev *indio_dev,
> + enum ssp_sensor_type type);
> +
> +int ssp_enable_sensor(struct ssp_data *data, enum ssp_sensor_type type,
> + u32 delay);
> +
> +int ssp_disable_sensor(struct ssp_data *data, enum ssp_sensor_type type);
> +
> +u32 ssp_get_sensor_delay(struct ssp_data *data, enum ssp_sensor_type);
> +
> +int ssp_change_delay(struct ssp_data *data, enum ssp_sensor_type type,
> + u32 delay);
> +#endif /* _SSP_SENSORS_H_ */
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists