| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 28 Dec 2014 16:25:21 +0100
From: Gabriele Mazzotta <gabriele.mzt@...il.com>
To: Pali Rohár <pali.rohar@...il.com>
Cc: Guenter Roeck <linux@...ck-us.net>, Arnd Bergmann <arnd@...db.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jean Delvare <jdelvare@...e.de>,
Steven Honeyman <stevenhoneyman@...il.com>,
Jochen Eisinger <jochen@...guin-breeder.org>,
linux-kernel@...r.kernel.org, Valdis.Kletnieks@...edu
Subject: Re: [PATCH 3/3] i8k: Remove laptop specific config data (fan_mult, fan_max) from driver
On Sunday 28 December 2014 09:46:19 Pali Rohár wrote:
> Ok, here are new patches for testing... Those you are still reading this email thread and have your Dell
> machines near, can you test them (ideally with disabling dmi config data)?
Could you please tell me exactly against what should I apply these
patches? I can see that they depend on other patches in this thread,
but I can't find any tree that includes them.
> diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c
> index 8ec4c37..d6e8a26 100644
> --- a/drivers/char/i8k.c
> +++ b/drivers/char/i8k.c
> @@ -64,9 +64,9 @@ static DEFINE_MUTEX(i8k_mutex);
> static char bios_version[4];
> static struct device *i8k_hwmon_dev;
> static u32 i8k_hwmon_flags;
> -static int i8k_fan_mult;
> -static int i8k_pwm_mult;
> -static int i8k_fan_max = I8K_FAN_HIGH;
> +static uint i8k_fan_mult;
> +static uint i8k_pwm_mult;
> +static uint i8k_fan_max = I8K_FAN_HIGH;
>
> #define I8K_HWMON_HAVE_TEMP1 (1 << 0)
> #define I8K_HWMON_HAVE_TEMP2 (1 << 1)
> @@ -95,12 +95,12 @@ static bool power_status;
> module_param(power_status, bool, 0600);
> MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k");
>
> -static int fan_mult = I8K_FAN_MULT;
> -module_param(fan_mult, int, 0);
> +static uint fan_mult = I8K_FAN_MULT;
> +module_param(fan_mult, uint, 0);
> MODULE_PARM_DESC(fan_mult, "Factor to multiply fan speed with");
>
> -static int fan_max = I8K_FAN_HIGH;
> -module_param(fan_max, int, 0);
> +static uint fan_max = I8K_FAN_HIGH;
> +module_param(fan_max, uint, 0);
> MODULE_PARM_DESC(fan_max, "Maximum configurable fan speed");
>
> static int i8k_open_fs(struct inode *inode, struct file *file);
> @@ -696,8 +696,8 @@ static int __init i8k_init_hwmon(void)
> }
>
> struct i8k_config_data {
> - int fan_mult;
> - int fan_max;
> + uint fan_mult;
> + uint fan_max;
> };
>
> enum i8k_configs {
>
>
>
> diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c
> index d6e8a26..6ad0872 100644
> --- a/drivers/char/i8k.c
> +++ b/drivers/char/i8k.c
> @@ -6,6 +6,7 @@
> * Hwmon integration:
> * Copyright (C) 2011 Jean Delvare <jdelvare@...e.de>
> * Copyright (C) 2013, 2014 Guenter Roeck <linux@...ck-us.net>
> + * Copyright (C) 2014 Pali Rohár <pali.rohar@...il.com>
> *
> * This program is free software; you can redistribute it and/or modify it
> * under the terms of the GNU General Public License as published by the
> @@ -42,12 +43,14 @@
> #define I8K_SMM_SET_FAN 0x01a3
> #define I8K_SMM_GET_FAN 0x00a3
> #define I8K_SMM_GET_SPEED 0x02a3
> +#define I8K_SMM_GET_NOM_SPEED 0x04a3
> #define I8K_SMM_GET_TEMP 0x10a3
> #define I8K_SMM_GET_TEMP_TYPE 0x11a3
> #define I8K_SMM_GET_DELL_SIG1 0xfea3
> #define I8K_SMM_GET_DELL_SIG2 0xffa3
>
> #define I8K_FAN_MULT 30
> +#define I8K_FAN_MAX_RPM 30000
> #define I8K_MAX_TEMP 127
>
> #define I8K_FN_NONE 0x00
> @@ -64,7 +67,7 @@ static DEFINE_MUTEX(i8k_mutex);
> static char bios_version[4];
> static struct device *i8k_hwmon_dev;
> static u32 i8k_hwmon_flags;
> -static uint i8k_fan_mult;
> +static uint i8k_fan_mult = I8K_FAN_MULT;
> static uint i8k_pwm_mult;
> static uint i8k_fan_max = I8K_FAN_HIGH;
>
> @@ -95,13 +98,13 @@ static bool power_status;
> module_param(power_status, bool, 0600);
> MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k");
>
> -static uint fan_mult = I8K_FAN_MULT;
> +static uint fan_mult;
> module_param(fan_mult, uint, 0);
> -MODULE_PARM_DESC(fan_mult, "Factor to multiply fan speed with");
> +MODULE_PARM_DESC(fan_mult, "Factor to multiply fan speed with (default: autodetect)");
>
> -static uint fan_max = I8K_FAN_HIGH;
> +static uint fan_max;
> module_param(fan_max, uint, 0);
> -MODULE_PARM_DESC(fan_max, "Maximum configurable fan speed");
> +MODULE_PARM_DESC(fan_max, "Maximum configurable fan speed (default: autodetect)");
>
> static int i8k_open_fs(struct inode *inode, struct file *file);
> static long i8k_ioctl(struct file *, unsigned int, unsigned long);
> @@ -276,6 +279,17 @@ static int i8k_get_fan_speed(int fan)
> }
>
> /*
> + * Read the fan nominal rpm for specific fan speed.
> + */
> +static int i8k_get_fan_nominal_speed(int fan, int speed)
> +{
> + struct smm_regs regs = { .eax = I8K_SMM_GET_NOM_SPEED, };
> +
> + regs.ebx = (fan & 0xff) | (speed << 8);
> + return i8k_smm(®s) ? : (regs.eax & 0xffff) * i8k_fan_mult;
> +}
> +
> +/*
> * Set the fan speed (off, low, high). Returns the new fan status.
> */
> static int i8k_set_fan(int fan, int speed)
> @@ -863,6 +877,7 @@ MODULE_DEVICE_TABLE(dmi, i8k_dmi_table);
> static int __init i8k_probe(void)
> {
> const struct dmi_system_id *id;
> + int fan, ret;
>
> /*
> * Get DMI information
> @@ -891,19 +906,40 @@ static int __init i8k_probe(void)
> return -ENODEV;
> }
>
> - i8k_fan_mult = fan_mult;
> - i8k_fan_max = fan_max ? : I8K_FAN_HIGH; /* Must not be 0 */
> + /*
> + * Set fan multiplier and maximal fan speed from dmi config
> + * Values specified in module parameters override values from dmi
> + */
> id = dmi_first_match(i8k_dmi_table);
> if (id && id->driver_data) {
> const struct i8k_config_data *conf = id->driver_data;
> -
> - if (fan_mult == I8K_FAN_MULT && conf->fan_mult)
> - i8k_fan_mult = conf->fan_mult;
> - if (fan_max == I8K_FAN_HIGH && conf->fan_max)
> - i8k_fan_max = conf->fan_max;
> + if (!fan_mult && conf->fan_mult)
> + fan_mult = conf->fan_mult;
> + if (!fan_max && conf->fan_max)
> + fan_max = conf->fan_max;
> }
> +
> + i8k_fan_max = fan_max ? : I8K_FAN_HIGH; /* Must not be 0 */
> i8k_pwm_mult = DIV_ROUND_UP(255, i8k_fan_max);
>
> + if (!fan_mult) {
> + /*
> + * Autodetect fan multiplier based on nominal rpm
> + * If fan reports rpm value too high then set multiplier to 1
> + */
> + for (fan = 0; fan < 2; ++fan) {
> + ret = i8k_get_fan_nominal_speed(fan, i8k_fan_max);
> + if (ret < 0)
> + continue;
> + if (ret > I8K_FAN_MAX_RPM)
> + i8k_fan_mult = 1;
> + break;
> + }
> + } else {
> + /* Fan multiplier was specified in module param or in dmi */
> + i8k_fan_mult = fan_mult;
> + }
> +
> return 0;
> }
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists