| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 1 Jan 2015 10:19:56 +0530
From: Sudip Mukherjee <sudipm.mukherjee@...il.com>
To: Lorenzo Stoakes <lstoakes@...il.com>
Cc: gregkh@...uxfoundation.org, anarey@...il.com,
mcgrof@...not-panic.com, tapaswenipathak@...il.com,
joe@...ches.com, rmfrfs@...il.com, yejiayily@...il.com,
gdonald@...il.com, devel@...verdev.osuosl.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 3/4] staging: rtl8192u: remove redundant code
On Wed, Dec 31, 2014 at 09:10:42PM +0000, Lorenzo Stoakes wrote:
> This patch fixes warnings/errors raised by checkpatch.pl relating to redundant
> code in r8192U_dm.c.
>
> Signed-off-by: Lorenzo Stoakes <lstoakes@...il.com>
> ---
> drivers/staging/rtl8192u/r8192U_dm.c | 176 +++++++++++++++++------------------
> 1 file changed, 84 insertions(+), 92 deletions(-)
>
> diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c
> index 862d2ab..ed566bb 100644
> --- a/drivers/staging/rtl8192u/r8192U_dm.c
> +++ b/drivers/staging/rtl8192u/r8192U_dm.c
> @@ -410,9 +410,9 @@ static void dm_check_rate_adaptive(struct net_device *dev)
>
> ratr_value = targetRATR;
> RT_TRACE(COMP_RATE, "currentRATR = %x, targetRATR = %x\n", currentRATR, targetRATR);
> - if (priv->rf_type == RF_1T2R) {
> + if (priv->rf_type == RF_1T2R)
> ratr_value &= ~(RATE_ALL_OFDM_2SS);
> - }
> +
but this is just removal of unnecessary braces. this is not removal of redundant code.
> write_nic_dword(dev, RATR0, ratr_value);
> write_nic_byte(dev, UFWP, 1);
>
> @@ -440,18 +440,17 @@ static void dm_bandwidth_autoswitch(struct net_device *dev)
> {
> struct r8192_priv *priv = ieee80211_priv(dev);
>
> - if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20 || !priv->ieee80211->bandwidth_auto_switch.bautoswitch_enable) {
> + if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20 || !priv->ieee80211->bandwidth_auto_switch.bautoswitch_enable)
> return;
> - } else {
> - if (priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz == false) { /* If send packets in 40 Mhz in 20/40 */
> - if (priv->undecorated_smoothed_pwdb <= priv->ieee80211->bandwidth_auto_switch.threshold_40Mhzto20Mhz)
> - priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = true;
> - } else { /* in force send packets in 20 Mhz in 20/40 */
> - if (priv->undecorated_smoothed_pwdb >= priv->ieee80211->bandwidth_auto_switch.threshold_20Mhzto40Mhz)
> - priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = false;
>
> - }
> + if (priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz == false) { /* If send packets in 40 Mhz in 20/40 */
> + if (priv->undecorated_smoothed_pwdb <= priv->ieee80211->bandwidth_auto_switch.threshold_40Mhzto20Mhz)
> + priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = true;
> + } else { /* in force send packets in 20 Mhz in 20/40 */
> + if (priv->undecorated_smoothed_pwdb >= priv->ieee80211->bandwidth_auto_switch.threshold_20Mhzto40Mhz)
> + priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = false;
> }
> +
> } /* dm_BandwidthAutoSwitch */
>
> /* OFDM default at 0db, index=6. */
> @@ -538,9 +537,8 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
> tx_cmd.Length = 4;
> tx_cmd.Value = Value;
> rtStatus = SendTxCommandPacket(dev, &tx_cmd, 12);
> - if (rtStatus == RT_STATUS_FAILURE) {
> + if (rtStatus == RT_STATUS_FAILURE)
> RT_TRACE(COMP_POWER_TRACKING, "Set configuration with tx cmd queue fail!\n");
> - }
> mdelay(1);
> /*DbgPrint("hi, vivi, strange\n");*/
> for (i = 0; i <= 30; i++) {
> @@ -580,9 +578,8 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
> break;
> }
>
> - for (k = 0; k < 5; k++) {
> + for (k = 0; k < 5; k++)
> Avg_TSSI_Meas_from_driver += tmp_report[k];
> - }
>
> Avg_TSSI_Meas_from_driver = Avg_TSSI_Meas_from_driver*100/5;
> RT_TRACE(COMP_POWER_TRACKING, "Avg_TSSI_Meas_from_driver = %d\n", Avg_TSSI_Meas_from_driver);
> @@ -605,56 +602,55 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
> RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation_difference = %d\n", priv->cck_present_attentuation_difference);
> RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation = %d\n", priv->cck_present_attentuation);
> return;
> - } else {
> - if (Avg_TSSI_Meas_from_driver < TSSI_13dBm - E_FOR_TX_POWER_TRACK) {
> - if (priv->rfa_txpowertrackingindex > 0) {
> - priv->rfa_txpowertrackingindex--;
> - if (priv->rfa_txpowertrackingindex_real > 4) {
> - priv->rfa_txpowertrackingindex_real--;
> - rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value);
> - }
> - }
> - } else {
> - if (priv->rfa_txpowertrackingindex < 36) {
> - priv->rfa_txpowertrackingindex++;
> - priv->rfa_txpowertrackingindex_real++;
> + }
> + if (Avg_TSSI_Meas_from_driver < TSSI_13dBm - E_FOR_TX_POWER_TRACK) {
> + if (priv->rfa_txpowertrackingindex > 0) {
> + priv->rfa_txpowertrackingindex--;
> + if (priv->rfa_txpowertrackingindex_real > 4) {
> + priv->rfa_txpowertrackingindex_real--;
> rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value);
> -
> }
> }
> - priv->cck_present_attentuation_difference
> - = priv->rfa_txpowertrackingindex - priv->rfa_txpowertracking_default;
> + } else {
> + if (priv->rfa_txpowertrackingindex < 36) {
> + priv->rfa_txpowertrackingindex++;
> + priv->rfa_txpowertrackingindex_real++;
> + rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value);
>
> - if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
> - priv->cck_present_attentuation
> - = priv->cck_present_attentuation_20Mdefault + priv->cck_present_attentuation_difference;
> - else
> - priv->cck_present_attentuation
> - = priv->cck_present_attentuation_40Mdefault + priv->cck_present_attentuation_difference;
> -
> - if (priv->cck_present_attentuation > -1 && priv->cck_present_attentuation < 23) {
> - if (priv->ieee80211->current_network.channel == 14 && !priv->bcck_in_ch14) {
> - priv->bcck_in_ch14 = TRUE;
> - dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
> - } else if (priv->ieee80211->current_network.channel != 14 && priv->bcck_in_ch14) {
> - priv->bcck_in_ch14 = FALSE;
> - dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
> - } else
> - dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
> }
> - RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex = %d\n", priv->rfa_txpowertrackingindex);
> - RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex_real = %d\n", priv->rfa_txpowertrackingindex_real);
> - RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation_difference = %d\n", priv->cck_present_attentuation_difference);
> - RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation = %d\n", priv->cck_present_attentuation);
> + }
> + priv->cck_present_attentuation_difference
> + = priv->rfa_txpowertrackingindex - priv->rfa_txpowertracking_default;
>
> - if (priv->cck_present_attentuation_difference <= -12 || priv->cck_present_attentuation_difference >= 24) {
> - priv->ieee80211->bdynamic_txpower_enable = TRUE;
> - write_nic_byte(dev, 0x1ba, 0);
> - RT_TRACE(COMP_POWER_TRACKING, "tx power track--->limited\n");
> - return;
> - }
> + if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
> + priv->cck_present_attentuation
> + = priv->cck_present_attentuation_20Mdefault + priv->cck_present_attentuation_difference;
> + else
> + priv->cck_present_attentuation
> + = priv->cck_present_attentuation_40Mdefault + priv->cck_present_attentuation_difference;
> +
> + if (priv->cck_present_attentuation > -1 && priv->cck_present_attentuation < 23) {
> + if (priv->ieee80211->current_network.channel == 14 && !priv->bcck_in_ch14) {
> + priv->bcck_in_ch14 = TRUE;
> + dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
> + } else if (priv->ieee80211->current_network.channel != 14 && priv->bcck_in_ch14) {
> + priv->bcck_in_ch14 = FALSE;
> + dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
> + } else
> + dm_cck_txpower_adjust(dev, priv->bcck_in_ch14);
> + }
> + RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex = %d\n", priv->rfa_txpowertrackingindex);
> + RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex_real = %d\n", priv->rfa_txpowertrackingindex_real);
> + RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation_difference = %d\n", priv->cck_present_attentuation_difference);
> + RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation = %d\n", priv->cck_present_attentuation);
>
> + if (priv->cck_present_attentuation_difference <= -12 || priv->cck_present_attentuation_difference >= 24) {
> + priv->ieee80211->bdynamic_txpower_enable = TRUE;
> + write_nic_byte(dev, 0x1ba, 0);
> + RT_TRACE(COMP_POWER_TRACKING, "tx power track--->limited\n");
> + return;
> }
> +
> write_nic_byte(dev, 0x1ba, 0);
> Avg_TSSI_Meas_from_driver = 0;
> for (k = 0; k < 5; k++)
> @@ -1324,12 +1320,11 @@ static void dm_CheckTXPowerTracking_TSSI(struct net_device *dev)
>
> if (!priv->btxpower_tracking)
> return;
> - else {
> - if ((tx_power_track_counter % 30 == 0) && (tx_power_track_counter != 0)) {
> - queue_delayed_work(priv->priv_wq, &priv->txpower_tracking_wq, 0);
> - }
> - tx_power_track_counter++;
> - }
> +
> + if ((tx_power_track_counter % 30 == 0) && (tx_power_track_counter != 0))
> + queue_delayed_work(priv->priv_wq, &priv->txpower_tracking_wq, 0);
> +
> + tx_power_track_counter++;
> }
>
> static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
> @@ -1339,11 +1334,10 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
> /*DbgPrint("dm_CheckTXPowerTracking()\n");*/
> if (!priv->btxpower_tracking)
> return;
> - else {
> - if (priv->txpower_count <= 2) {
> - priv->txpower_count++;
> - return;
> - }
> +
> + if (priv->txpower_count <= 2) {
> + priv->txpower_count++;
> + return;
> }
>
> if (!TM_Trigger) {
> @@ -1358,11 +1352,11 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
> rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
> TM_Trigger = 1;
> return;
> - } else {
> - /*DbgPrint("Schedule TxPowerTrackingWorkItem\n");*/
> - queue_delayed_work(priv->priv_wq, &priv->txpower_tracking_wq, 0);
> - TM_Trigger = 0;
> }
> +
> + /*DbgPrint("Schedule TxPowerTrackingWorkItem\n");*/
> + queue_delayed_work(priv->priv_wq, &priv->txpower_tracking_wq, 0);
> + TM_Trigger = 0;
> }
>
> static void dm_check_txpower_tracking(struct net_device *dev)
> @@ -1834,16 +1828,16 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
> DM_DigTable.RssiHighThresh, DM_DigTable.Dig_State);*/
> /* 1. When RSSI decrease, We have to judge if it is smaller than a threshold
> and then execute the step below. */
> - if ((priv->undecorated_smoothed_pwdb <= dm_digtable.rssi_low_thresh)) {
> + if (priv->undecorated_smoothed_pwdb <= dm_digtable.rssi_low_thresh) {
> /* 2008/02/05 MH When we execute silent reset, the DIG PHY parameters
> will be reset to init value. We must prevent the condition. */
> if (dm_digtable.dig_state == DM_STA_DIG_OFF &&
> (priv->reset_count == reset_cnt)) {
> return;
> - } else {
> - reset_cnt = priv->reset_count;
> }
>
> + reset_cnt = priv->reset_count;
> +
> /* If DIG is off, DIG high power state must reset. */
> dm_digtable.dig_highpwr_state = DM_STA_DIG_MAX;
> dm_digtable.dig_state = DM_STA_DIG_OFF;
> @@ -1884,20 +1878,20 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
>
> /* 2. When RSSI increase, We have to judge if it is larger than a threshold
> and then execute the step below. */
> - if ((priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh)) {
> + if (priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh) {
> u8 reset_flag = 0;
>
> if (dm_digtable.dig_state == DM_STA_DIG_ON &&
> (priv->reset_count == reset_cnt)) {
> dm_ctrl_initgain_byrssi_highpwr(dev);
> return;
> - } else {
> - if (priv->reset_count != reset_cnt)
> - reset_flag = 1;
> -
> - reset_cnt = priv->reset_count;
> }
>
> + if (priv->reset_count != reset_cnt)
> + reset_flag = 1;
> +
> + reset_cnt = priv->reset_count;
> +
> dm_digtable.dig_state = DM_STA_DIG_ON;
> /*DbgPrint("DIG ON\n\r");*/
>
> @@ -1989,8 +1983,8 @@ static void dm_ctrl_initgain_byrssi_highpwr(
> if (dm_digtable.dig_highpwr_state == DM_STA_DIG_ON &&
> (priv->reset_count == reset_cnt_highpwr))
> return;
> - else
> - dm_digtable.dig_highpwr_state = DM_STA_DIG_ON;
> +
> + dm_digtable.dig_highpwr_state = DM_STA_DIG_ON;
>
> /* 3.1 Higher PD_TH for OFDM for high power state. */
> if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) {
> @@ -2006,8 +2000,8 @@ static void dm_ctrl_initgain_byrssi_highpwr(
> if (dm_digtable.dig_highpwr_state == DM_STA_DIG_OFF &&
> (priv->reset_count == reset_cnt_highpwr))
> return;
> - else
> - dm_digtable.dig_highpwr_state = DM_STA_DIG_OFF;
> +
> + dm_digtable.dig_highpwr_state = DM_STA_DIG_OFF;
>
> if (priv->undecorated_smoothed_pwdb < dm_digtable.rssi_high_power_lowthresh &&
> priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh) {
> @@ -2104,7 +2098,7 @@ static void dm_pd_th(
> if (dm_digtable.cur_connect_state == DIG_CONNECT) {
> if (dm_digtable.rssi_val >= dm_digtable.rssi_high_power_highthresh)
> dm_digtable.curpd_thstate = DIG_PD_AT_HIGH_POWER;
> - else if ((dm_digtable.rssi_val <= dm_digtable.rssi_low_thresh))
> + else if (dm_digtable.rssi_val <= dm_digtable.rssi_low_thresh)
> dm_digtable.curpd_thstate = DIG_PD_AT_LOW_POWER;
> else if ((dm_digtable.rssi_val >= dm_digtable.rssi_high_thresh) &&
> (dm_digtable.rssi_val < dm_digtable.rssi_high_power_lowthresh))
> @@ -2186,9 +2180,9 @@ static void dm_cs_ratio(
>
> if (dm_digtable.pre_connect_state == dm_digtable.cur_connect_state) {
> if (dm_digtable.cur_connect_state == DIG_CONNECT) {
> - if ((dm_digtable.rssi_val <= dm_digtable.rssi_low_thresh))
> + if (dm_digtable.rssi_val <= dm_digtable.rssi_low_thresh)
> dm_digtable.curcs_ratio_state = DIG_CS_RATIO_LOWER;
> - else if ((dm_digtable.rssi_val >= dm_digtable.rssi_high_thresh))
> + else if (dm_digtable.rssi_val >= dm_digtable.rssi_high_thresh)
> dm_digtable.curcs_ratio_state = DIG_CS_RATIO_HIGHER;
> else
> dm_digtable.curcs_ratio_state = dm_digtable.precs_ratio_state;
> @@ -3091,11 +3085,10 @@ static void dm_dynamic_txpower(struct net_device *dev)
> priv->bDynamicTxHighPower = false;
>
> /* low power state check */
> - if (priv->undecorated_smoothed_pwdb < 35) {
> + if (priv->undecorated_smoothed_pwdb < 35)
> priv->bDynamicTxLowPower = true;
> - } else if (priv->undecorated_smoothed_pwdb >= 40) {
> + else if (priv->undecorated_smoothed_pwdb >= 40)
> priv->bDynamicTxLowPower = false;
> - }
> }
> } else {
> /*pHalData->bTXPowerCtrlforNearFarRange = !pHalData->bTXPowerCtrlforNearFarRange;*/
> @@ -3146,7 +3139,6 @@ static void dm_send_rssi_tofw(struct net_device *dev)
> * 0x1e0(byte) to notify driver.
> */
> write_nic_byte(dev, DRIVER_RSSI, (u8)priv->undecorated_smoothed_pwdb);
> - return;
> }
>
> /*---------------------------Define function prototype------------------------*/
> --
> 2.2.1
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists