| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 5 Jan 2015 22:41:49 -0500
From: Steven Rostedt <rostedt@...dmis.org>
To: LKML <linux-kernel@...r.kernel.org>,
linux-trace-users@...r.kernel.org, linux-perf-users@...r.kernel.org
Subject: [ANNOUNCE] trace-cmd v2.5 released
Changes from version 2.4:
Added three new commands:
o trace-cmd stream
This starts ftrace tracing and reads the binary files and processes it
to produce text output without the need to save to disk (or network).
o trace-cmd profile
This uses the stream infrastructure from above, but also keeps track
of the data and analyzes it to produce various useful statistics.
By default it enables function graph tracing with a depth of 1, to only
show where user tasks entered the kernel. It also enables sched switch
and sched wakeup events to see how long it took to wake up a task.
It also enables stack tracing to display where the latencies are happening.
There's lots of options to change the default settings to show more
about how the kernel is working.
o trace-cmd stat
Shows what may be enabled in ftrace. There's times when events are enabled
or kprobes are added, or even when filters are used, and it may be difficult
to see what state ftrace is in. Using trace-cmd stat will show you the state
that ftrace is in. It will display if a tracer is enabled and much more.
New options:
In trace-cmd record
Added --profile, that enables the default profiling events (and function graph
tracing with depth of 1). These are the same events that are enabled with the
trace-cmd profile command.
In trace-cmd report
Added --profile option that will read the data of the trace.dat file and report
it the same as the trace-cmd profile command would.
Some improvements:
o trace-cmd record will reset everything it touches after it is done recording.
Before it use to leave some things still active, like options and such.
Now, if you enable options for recording, it will reset them when finished,
as well as triggers and filters. trace-cmd start, or trace-cmd record with
the -k option will leave the changes as is when done.
o trace-cmd reset now resets triggers and filters.
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
Here's an example of what the new profiler does: (all times are in
nanoseconds)
# trace-cmd profile sleep 1
[...]
task: sleep-3269
Event: sched_switch:R (1) Total: 149811 Avg: 149811 Max: 149811 Min:149811
|
+ ftrace_raw_event_sched_switch (0xffffffff8109f310)
100% (1) time:149811 max:149811 min:149811 avg:149811
__schedule (0xffffffff816c1e91)
preempt_schedule (0xffffffff816c237e)
___preempt_schedule (0xffffffff81351a69)
cpu_stop_queue_work (0xffffffff81108dc6)
stop_one_cpu (0xffffffff8110909a)
sched_exec (0xffffffff810a119b)
do_execveat_common.isra.31 (0xffffffff811de538)
do_execve (0xffffffff811dea9c)
SyS_execve (0xffffffff811ded2e)
return_to_handler (0xffffffff816c8458)
stub_execve (0xffffffff816c6929)
Event: sched_switch:S (1) Total: 1000586336 Avg: 1000586336 Max: 1000586336 Min:1000586336
|
+ ftrace_raw_event_sched_switch (0xffffffff8109f310)
100% (1) time:1000586336 max:1000586336 min:1000586336 avg:1000586336
__schedule (0xffffffff816c1e91)
schedule (0xffffffff816c23c9)
do_nanosleep (0xffffffff816c4f2c)
hrtimer_nanosleep (0xffffffff810dcd86)
SyS_nanosleep (0xffffffff810dcea6)
return_to_handler (0xffffffff816c8458)
tracesys_phase2 (0xffffffff816c65b0)
Event: sched_wakeup:0xcc5 (1) Total: 67019 Avg: 67019 Max: 67019 Min:67019
|
+ ftrace_raw_event_sched_wakeup_template (0xffffffff8109d960)
100% (1) time:67019 max:67019 min:67019 avg:67019
ttwu_do_wakeup (0xffffffff810a01a2)
ttwu_do_activate.constprop.122 (0xffffffff810a0236)
try_to_wake_up (0xffffffff810a3ec3)
wake_up_process (0xffffffff810a4057)
hrtimer_wakeup (0xffffffff810db772)
__run_hrtimer (0xffffffff810dbd91)
hrtimer_interrupt (0xffffffff810dc6b7)
local_apic_timer_interrupt (0xffffffff810363e7)
smp_trace_apic_timer_interrupt (0xffffffff816c8c6a)
trace_apic_timer_interrupt (0xffffffff816c725a)
finish_task_switch (0xffffffff8109c3a4)
__schedule (0xffffffff816c1e11)
schedule (0xffffffff816c23c9)
schedule_preempt_disabled (0xffffffff816c26f8)
return_to_handler (0xffffffff816c8458)
cpu_startup_entry (0xffffffff810b55bf)
start_secondary (0xffffffff81034821)
Event: func: SyS_nanosleep() (1) Total: 1000713547 Avg: 1000713547 Max: 1000713547 Min:1000713547
Event: func: do_notify_resume() (1) Total: 2115 Avg: 2115 Max: 2115 Min:2115
Event: func: SyS_munmap() (1) Total: 18242 Avg: 18242 Max: 18242 Min:18242
Event: func: sys_arch_prctl() (1) Total: 453 Avg: 453 Max: 453 Min:453
Event: func: SyS_mprotect() (4) Total: 14749 Avg: 3687 Max: 5552 Min:2830
Event: func: SyS_read() (1) Total: 1840 Avg: 1840 Max: 1840 Min:1840
Event: func: sys_close() (5) Total: 3760 Avg: 752 Max: 1300 Min:591
Event: func: sys_newfstat() (3) Total: 2428 Avg: 809 Max: 963 Min:713
Event: func: SyS_open() (3) Total: 18524 Avg: 6174 Max: 8139 Min:4821
Event: func: sys_access() (1) Total: 3330 Avg: 3330 Max: 3330 Min:3330
Event: func: SyS_mmap() (8) Total: 25451 Avg: 3181 Max: 6508 Min:1682
Event: func: sys_brk() (4) Total: 3209 Avg: 802 Max: 2184 Min:315
Event: func: sys_execve() (5) Total: 476177 Avg: 95235 Max: 461530 Min:2220
Event: func: syscall_trace_enter_phase2() (38) Total: 23190 Avg: 610 Max: 891 Min:323
Event: func: syscall_trace_enter_phase1() (38) Total: 10393 Avg: 273 Max: 527 Min:160
Event: func: __do_page_fault() (54) Total: 321093 Avg: 5946 Max: 74358 Min:721
Event: func: syscall_trace_leave() (38) Total: 26608 Avg: 700 Max: 971 Min:378
Event: func: __sb_end_write() (1) Total: 400 Avg: 400 Max: 400 Min:400
Event: func: fsnotify() (1) Total: 619 Avg: 619 Max: 619 Min:619
Event: func: __fsnotify_parent() (1) Total: 358 Avg: 358 Max: 358 Min:358
Event: func: mutex_unlock() (2) Total: 40585 Avg: 20292 Max: 40290 Min:295
Event: func: smp_trace_irq_work_interrupt() (8) Total: 331596 Avg: 41449 Max: 115301 Min:1013
Event: sys_enter:35 (1) Total: 1000715243 Avg: 1000715243 Max: 1000715243 Min:1000715243
Event: sys_enter:11 (1) Total: 77933 Avg: 77933 Max: 77933 Min:77933
Event: sys_enter:158 (1) Total: 1854 Avg: 1854 Max: 1854 Min:1854
Event: sys_enter:10 (4) Total: 136307 Avg: 34076 Max: 120779 Min:4068
Event: sys_enter:0 (1) Total: 3014 Avg: 3014 Max: 3014 Min:3014
Event: sys_enter:3 (5) Total: 65336 Avg: 13067 Max: 57459 Min:1907
Event: sys_enter:5 (3) Total: 6096 Avg: 2032 Max: 2253 Min:1903
Event: sys_enter:2 (3) Total: 24618 Avg: 8206 Max: 9456 Min:6272
Event: sys_enter:21 (1) Total: 5052 Avg: 5052 Max: 5052 Min:5052
Event: sys_enter:9 (8) Total: 38694 Avg: 4836 Max: 9998 Min:3108
Event: sys_enter:12 (4) Total: 8893 Avg: 2223 Max: 3539 Min:1514
Event: sys_enter:59 (5) Total: 481653 Avg: 96330 Max: 462822 Min:2984
Event: page_fault_user:0x398d86b630 (1)
Event: page_fault_user:0x398d844de0 (1)
Event: page_fault_user:0x398d8d9020 (1)
Event: page_fault_user:0xc84008 (1)
Event: page_fault_user:0x7ff5b75f9074 (1)
Event: page_fault_user:0x7ff5b7500ed0 (1)
Event: page_fault_user:0x7ff5b7630950 (1)
Event: page_fault_user:0x7ff5b74eb644 (1)
Event: page_fault_user:0x7ff5b74c2560 (1)
Event: page_fault_user:0x7ff5b749c010 (1)
Event: page_fault_user:0xc83008 (1)
Event: page_fault_user:0x398d900510 (1)
Event: page_fault_user:0x398dbb3ae8 (1)
Event: page_fault_user:0x398d87f490 (1)
Event: page_fault_user:0x398d8eb660 (1)
Event: page_fault_user:0x398d8bd730 (1)
Event: page_fault_user:0x398d9625d9 (1)
Event: page_fault_user:0x398d931810 (1)
Event: page_fault_user:0x398dbb7114 (1)
Event: page_fault_user:0x398d837610 (1)
Event: page_fault_user:0x398d89e860 (1)
Event: page_fault_user:0x398d8f23b0 (1)
Event: page_fault_user:0x398dbb4510 (1)
Event: page_fault_user:0x398dbad6f0 (1)
Event: page_fault_user:0x398dbb1018 (1)
Event: page_fault_user:0x398d977b37 (1)
Event: page_fault_user:0x398d92eb60 (1)
Event: page_fault_user:0x398d8abff0 (1)
Event: page_fault_user:0x398dbb0d30 (1)
Event: page_fault_user:0x398dbb6c24 (1)
Event: page_fault_user:0x398d821c50 (1)
Event: page_fault_user:0x398dbb6c20 (1)
Event: page_fault_user:0x398d886350 (1)
Event: page_fault_user:0x7ff5bd88d000 (1)
Event: page_fault_user:0x7ff5bd88c740 (1)
Event: page_fault_user:0x7ff5bd88e000 (1)
Event: page_fault_user:0x398d816230 (1)
Event: page_fault_user:0x398d8002b8 (1)
Event: page_fault_user:0x398dbb0b40 (1)
Event: page_fault_user:0x398dbb2880 (1)
Event: page_fault_user:0x7ff5bd8a385c (1)
Event: page_fault_user:0x7ff5bd88f000 (1)
Event: page_fault_user:0x606e70 (1)
Event: page_fault_user:0x7ff5bd8ac010 (1)
Event: page_fault_user:0x7fff9e7fe038 (1)
Event: page_fault_user:0x606da8 (1)
Event: page_fault_user:0x400040 (1)
Event: page_fault_user:0x7fff9e7cfff8 (1)
Event: page_fault_user:0x398d222218 (1)
Event: page_fault_user:0x398d015120 (1)
Event: page_fault_user:0x398d220ce8 (1)
Event: page_fault_user:0x398d220b80 (1)
Event: page_fault_user:0x398d001590 (1)
Event: page_fault_user:0x398d838490 (1)
Event: softirq_raise:RCU (1) Total: 4123 Avg: 4123 Max: 4123 Min:4123
Event: softirq_raise:TIMER (1) Total: 3889 Avg: 3889 Max: 3889 Min:3889
Event: softirq_entry:RCU (1) Total: 952 Avg: 952 Max: 952 Min:952
Event: softirq_entry:TIMER (1) Total: 539 Avg: 539 Max: 539 Min:539
Don't forget to install the docs:
make doc
sudo make install_doc
and read man trace-cmd-profile for more details.
Enjoy,
-- Steve
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists