| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 2 Feb 2015 10:32:53 -0500
From: Benjamin Tissoires <benjamin.tissoires@...il.com>
To: Henrik Rydberg <rydberg@...math.org>
Cc: Dmitry Torokhov <dmitry.torokhov@...il.com>,
Peter Hutterer <peter.hutterer@...-t.net>,
linux-input <linux-input@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] Input: MT - Add support for balanced slot assignment
On Feb 01 2015 or thereabouts, Henrik Rydberg wrote:
> Hi Benjamin,
>
> > Tested this morning, and yes, it solves the problem.
> > I assumed that the dmax was in mm, and used "10 * priv->x_res", which
> > seemed to do the trick:
> > - tapping with two fingers side by side triggered the jumps
> > - in the general case (switching from the index to the thumb to
> > click), the jumps disappeared.
>
> Great, thanks for testing.
>
> > Maybe we should also add a doc telling which units the dmax should be.
>
> I added an enhanced description, which hopefully clarifies the units
> of dmax.
>
> > When you'll sign this, you can add my tested-by.
>
> Done, and tested against Linus' master. I take it you have a patch on
> this coming up as well?
Yep. I have a one line patch to enable the feature in synaptics. I will
send it as soon as Dmitry take this one.
Cheers,
Benjamin
>
> Thanks,
> Henrik
>
> From 2a4986420e634df2f0ba09198cb1e55714f61577 Mon Sep 17 00:00:00 2001
> From: Henrik Rydberg <rydberg@...math.org>
> Date: Sun, 1 Feb 2015 09:16:10 +0100
> Subject: [PATCH v2] Input: MT - Add support for balanced slot assignment
>
> Some devices are not fast enough to differentiate between a
> fast-moving contact and a new contact. This problem cannot be fully
> resolved because information is truly missing, but it is possible
> to safe-guard against obvious mistakes by restricting movement with
> a maximum displacement.
>
> The new problem formulation for dmax > 0 cannot benefit from the
> speedup for positive definite matrices, but since the convergence is
> faster, the result is about the same. For a handful of contacts, the
> latency difference is truly negligible.
>
> Suggested-by: Benjamin Tissoires <benjamin.tissoires@...hat.com>
> Tested-by: Benjamin Tissoires <benjamin.tissoires@...hat.com>
> Signed-off-by: Henrik Rydberg <rydberg@...math.org>
> ---
> drivers/input/input-mt.c | 31 ++++++++++++++++++++-----------
> drivers/input/mouse/alps.c | 2 +-
> drivers/input/mouse/bcm5974.c | 2 +-
> drivers/input/mouse/cypress_ps2.c | 2 +-
> drivers/input/mouse/synaptics.c | 2 +-
> drivers/input/touchscreen/pixcir_i2c_ts.c | 2 +-
> include/linux/input/mt.h | 3 ++-
> 7 files changed, 27 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
> index fbe29fc..cb150a1 100644
> --- a/drivers/input/input-mt.c
> +++ b/drivers/input/input-mt.c
> @@ -293,7 +293,7 @@ void input_mt_sync_frame(struct input_dev *dev)
> }
> EXPORT_SYMBOL(input_mt_sync_frame);
>
> -static int adjust_dual(int *begin, int step, int *end, int eq)
> +static int adjust_dual(int *begin, int step, int *end, int eq, int mu)
> {
> int f, *p, s, c;
>
> @@ -311,9 +311,10 @@ static int adjust_dual(int *begin, int step, int *end, int eq)
> s = *p;
>
> c = (f + s + 1) / 2;
> - if (c == 0 || (c > 0 && !eq))
> + if (c == 0 || (c > mu && (!eq || mu > 0)))
> return 0;
> - if (s < 0)
> + /* Improve convergence for positive matrices by penalizing overcovers */
> + if (s < 0 && mu <= 0)
> c *= 2;
>
> for (p = begin; p != end; p += step)
> @@ -322,23 +323,24 @@ static int adjust_dual(int *begin, int step, int *end, int eq)
> return (c < s && s <= 0) || (f >= 0 && f < c);
> }
>
> -static void find_reduced_matrix(int *w, int nr, int nc, int nrc)
> +static void find_reduced_matrix(int *w, int nr, int nc, int nrc, int mu)
> {
> int i, k, sum;
>
> for (k = 0; k < nrc; k++) {
> for (i = 0; i < nr; i++)
> - adjust_dual(w + i, nr, w + i + nrc, nr <= nc);
> + adjust_dual(w + i, nr, w + i + nrc, nr <= nc, mu);
> sum = 0;
> for (i = 0; i < nrc; i += nr)
> - sum += adjust_dual(w + i, 1, w + i + nr, nc <= nr);
> + sum += adjust_dual(w + i, 1, w + i + nr, nc <= nr, mu);
> if (!sum)
> break;
> }
> }
>
> static int input_mt_set_matrix(struct input_mt *mt,
> - const struct input_mt_pos *pos, int num_pos)
> + const struct input_mt_pos *pos, int num_pos,
> + int mu)
> {
> const struct input_mt_pos *p;
> struct input_mt_slot *s;
> @@ -352,7 +354,7 @@ static int input_mt_set_matrix(struct input_mt *mt,
> y = input_mt_get_value(s, ABS_MT_POSITION_Y);
> for (p = pos; p != pos + num_pos; p++) {
> int dx = x - p->x, dy = y - p->y;
> - *w++ = dx * dx + dy * dy;
> + *w++ = dx * dx + dy * dy - mu;
> }
> }
>
> @@ -393,17 +395,24 @@ static void input_mt_set_slots(struct input_mt *mt,
> * @slots: the slot assignment to be filled
> * @pos: the position array to match
> * @num_pos: number of positions
> + * @dmax: maximum ABS_MT_POSITION displacement (zero for infinite)
> *
> * Performs a best match against the current contacts and returns
> * the slot assignment list. New contacts are assigned to unused
> * slots.
> *
> + * The assignments are balanced so that all coordinate displacements are
> + * below the euclidian distance dmax. If no such assignment can be found,
> + * some contacts are assigned to unused slots.
> + *
> * Returns zero on success, or negative error in case of failure.
> */
> int input_mt_assign_slots(struct input_dev *dev, int *slots,
> - const struct input_mt_pos *pos, int num_pos)
> + const struct input_mt_pos *pos, int num_pos,
> + int dmax)
> {
> struct input_mt *mt = dev->mt;
> + int mu = 2 * dmax * dmax;
> int nrc;
>
> if (!mt || !mt->red)
> @@ -413,8 +422,8 @@ int input_mt_assign_slots(struct input_dev *dev, int *slots,
> if (num_pos < 1)
> return 0;
>
> - nrc = input_mt_set_matrix(mt, pos, num_pos);
> - find_reduced_matrix(mt->red, num_pos, nrc / num_pos, nrc);
> + nrc = input_mt_set_matrix(mt, pos, num_pos, mu);
> + find_reduced_matrix(mt->red, num_pos, nrc / num_pos, nrc, mu);
> input_mt_set_slots(mt, slots, num_pos);
>
> return 0;
> diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
> index 54ff0379..6c64fb2 100644
> --- a/drivers/input/mouse/alps.c
> +++ b/drivers/input/mouse/alps.c
> @@ -435,7 +435,7 @@ static void alps_report_mt_data(struct psmouse *psmouse, int n)
> struct alps_fields *f = &priv->f;
> int i, slot[MAX_TOUCHES];
>
> - input_mt_assign_slots(dev, slot, f->mt, n);
> + input_mt_assign_slots(dev, slot, f->mt, n, 0);
> for (i = 0; i < n; i++)
> alps_set_slot(dev, slot[i], f->mt[i].x, f->mt[i].y);
>
> diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
> index c329cdb..b10709f 100644
> --- a/drivers/input/mouse/bcm5974.c
> +++ b/drivers/input/mouse/bcm5974.c
> @@ -564,7 +564,7 @@ static int report_tp_state(struct bcm5974 *dev, int size)
> dev->index[n++] = &f[i];
> }
>
> - input_mt_assign_slots(input, dev->slots, dev->pos, n);
> + input_mt_assign_slots(input, dev->slots, dev->pos, n, 0);
>
> for (i = 0; i < n; i++)
> report_finger_data(input, dev->slots[i],
> diff --git a/drivers/input/mouse/cypress_ps2.c b/drivers/input/mouse/cypress_ps2.c
> index 8af34ff..9118a18 100644
> --- a/drivers/input/mouse/cypress_ps2.c
> +++ b/drivers/input/mouse/cypress_ps2.c
> @@ -538,7 +538,7 @@ static void cypress_process_packet(struct psmouse *psmouse, bool zero_pkt)
> pos[i].y = contact->y;
> }
>
> - input_mt_assign_slots(input, slots, pos, n);
> + input_mt_assign_slots(input, slots, pos, n, 0);
>
> for (i = 0; i < n; i++) {
> contact = &report_data.contacts[i];
> diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
> index f947292..84d0401 100644
> --- a/drivers/input/mouse/synaptics.c
> +++ b/drivers/input/mouse/synaptics.c
> @@ -1204,7 +1204,7 @@ static void synaptics_profile_sensor_process(struct psmouse *psmouse,
> pos[i].y = synaptics_invert_y(hw[i]->y);
> }
>
> - input_mt_assign_slots(dev, slot, pos, nsemi);
> + input_mt_assign_slots(dev, slot, pos, nsemi, 0);
>
> for (i = 0; i < nsemi; i++) {
> input_mt_slot(dev, slot[i]);
> diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
> index fc49c75..ccdf654 100644
> --- a/drivers/input/touchscreen/pixcir_i2c_ts.c
> +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
> @@ -126,7 +126,7 @@ static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts,
> pos[i].y = touch->y;
> }
>
> - input_mt_assign_slots(ts->input, slots, pos, n);
> + input_mt_assign_slots(ts->input, slots, pos, n, 0);
> }
>
> for (i = 0; i < n; i++) {
> diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h
> index f583ff6..d7188de 100644
> --- a/include/linux/input/mt.h
> +++ b/include/linux/input/mt.h
> @@ -119,7 +119,8 @@ struct input_mt_pos {
> };
>
> int input_mt_assign_slots(struct input_dev *dev, int *slots,
> - const struct input_mt_pos *pos, int num_pos);
> + const struct input_mt_pos *pos, int num_pos,
> + int dmax);
>
> int input_mt_get_slot_by_key(struct input_dev *dev, int key);
>
> --
> 2.2.2
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists