| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 2 Mar 2015 16:04:18 -0800
From: Dmitry Torokhov <dmitry.torokhov@...il.com>
To: Scott Branden <sbranden@...adcom.com>
Cc: bcm-kernel-feedback-list@...adcom.com,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Grant Likely <grant.likely@...aro.org>,
Ray Jui <rjui@...adcom.com>,
Jonathan Richardson <jonathar@...adcom.com>,
Dmitry Torokhov <dtor@...gle.com>,
Anatol Pomazao <anatol@...gle.com>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 1/2] Input: bcm-keypad: add device tree bindings
On Sat, Feb 28, 2015 at 08:35:56AM -0800, Scott Branden wrote:
> Documents the Broadcom keypad controller device tree bindings.
>
> Reviewed-by: Ray Jui <rjui@...adcom.com>
> Signed-off-by: Scott Branden <sbranden@...adcom.com>
I folded this into the patch adding the driver itself and queued for
4.1.
Thank you.
> ---
> .../devicetree/bindings/input/brcm,bcm-keypad.txt | 108 +++++++++++++++++++++
> 1 file changed, 108 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt
>
> diff --git a/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt b/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt
> new file mode 100644
> index 0000000..b77f50b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt
> @@ -0,0 +1,108 @@
> +* Broadcom Keypad Controller device tree bindings
> +
> +Broadcom Keypad controller is used to interface a SoC with a matrix-type
> +keypad device. The keypad controller supports multiple row and column lines.
> +A key can be placed at each intersection of a unique row and a unique column.
> +The keypad controller can sense a key-press and key-release and report the
> +event using a interrupt to the cpu.
> +
> +This binding is based on the matrix-keymap binding with the following
> +changes:
> +
> +keypad,num-rows and keypad,num-columns are required.
> +
> +Required SoC Specific Properties:
> +- compatible: should be "brcm,bcm-keypad"
> +
> +- reg: physical base address of the controller and length of memory mapped
> + region.
> +
> +- interrupts: The interrupt number to the cpu.
> +
> +Board Specific Properties:
> +- keypad,num-rows: Number of row lines connected to the keypad
> + controller.
> +
> +- keypad,num-columns: Number of column lines connected to the
> + keypad controller.
> +
> +- col-debounce-filter-period: The debounce period for the Column filter.
> +
> + KEYPAD_DEBOUNCE_1_ms = 0
> + KEYPAD_DEBOUNCE_2_ms = 1
> + KEYPAD_DEBOUNCE_4_ms = 2
> + KEYPAD_DEBOUNCE_8_ms = 3
> + KEYPAD_DEBOUNCE_16_ms = 4
> + KEYPAD_DEBOUNCE_32_ms = 5
> + KEYPAD_DEBOUNCE_64_ms = 6
> + KEYPAD_DEBOUNCE_128_ms = 7
> +
> +- status-debounce-filter-period: The debounce period for the Status filter.
> +
> + KEYPAD_DEBOUNCE_1_ms = 0
> + KEYPAD_DEBOUNCE_2_ms = 1
> + KEYPAD_DEBOUNCE_4_ms = 2
> + KEYPAD_DEBOUNCE_8_ms = 3
> + KEYPAD_DEBOUNCE_16_ms = 4
> + KEYPAD_DEBOUNCE_32_ms = 5
> + KEYPAD_DEBOUNCE_64_ms = 6
> + KEYPAD_DEBOUNCE_128_ms = 7
> +
> +- row-output-enabled: An optional property indicating whether the row or
> + column is being used as output. If specified the row is being used
> + as the output. Else defaults to column.
> +
> +- pull-up-enabled: An optional property indicating the Keypad scan mode.
> + If specified implies the keypad scan pull-up has been enabled.
> +
> +- autorepeat: Boolean, Enable auto repeat feature of Linux input
> + subsystem (optional).
> +
> +- linux,keymap: The keymap for keys as described in the binding document
> + devicetree/bindings/input/matrix-keymap.txt.
> +
> +Example:
> +#include "dt-bindings/input/input.h"
> +
> +/ {
> + keypad: keypad@...ac000 {
> + /* Required SoC specific properties */
> + compatible = "brcm,bcm-keypad";
> +
> + /* Required Board specific properties */
> + keypad,num-rows = <5>;
> + keypad,num-columns = <5>;
> + status = "okay";
> +
> + linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_F) /* key_forward */
> + MATRIX_KEY(0x00, 0x03, KEY_HOME) /* key_home */
> + MATRIX_KEY(0x00, 0x04, KEY_M) /* key_message */
> + MATRIX_KEY(0x01, 0x00, KEY_A) /* key_contacts */
> + MATRIX_KEY(0x01, 0x01, KEY_1) /* key_1 */
> + MATRIX_KEY(0x01, 0x02, KEY_2) /* key_2 */
> + MATRIX_KEY(0x01, 0x03, KEY_3) /* key_3 */
> + MATRIX_KEY(0x01, 0x04, KEY_S) /* key_speaker */
> + MATRIX_KEY(0x02, 0x00, KEY_P) /* key_phone */
> + MATRIX_KEY(0x02, 0x01, KEY_4) /* key_4 */
> + MATRIX_KEY(0x02, 0x02, KEY_5) /* key_5 */
> + MATRIX_KEY(0x02, 0x03, KEY_6) /* key_6 */
> + MATRIX_KEY(0x02, 0x04, KEY_VOLUMEUP) /* key_vol_up */
> + MATRIX_KEY(0x03, 0x00, KEY_C) /* key_call_log */
> + MATRIX_KEY(0x03, 0x01, KEY_7) /* key_7 */
> + MATRIX_KEY(0x03, 0x02, KEY_8) /* key_8 */
> + MATRIX_KEY(0x03, 0x03, KEY_9) /* key_9 */
> + MATRIX_KEY(0x03, 0x04, KEY_VOLUMEDOWN) /* key_vol_down */
> + MATRIX_KEY(0x04, 0x00, KEY_H) /* key_headset */
> + MATRIX_KEY(0x04, 0x01, KEY_KPASTERISK) /* key_* */
> + MATRIX_KEY(0x04, 0x02, KEY_0) /* key_0 */
> + MATRIX_KEY(0x04, 0x03, KEY_GRAVE) /* key_# */
> + MATRIX_KEY(0x04, 0x04, KEY_MUTE) /* key_mute */
> + >;
> +
> + /* Optional board specific properties */
> + col-debounce-filter-period = <5>;
> + row-output-enabled;
> + pull-up-enabled;
> +
> + };
> +};
> --
> 2.3.0
>
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists