lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Mon, 9 Mar 2015 17:21:58 -0700
From:	Ray Jui <rjui@...adcom.com>
To:	Bjorn Helgaas <bhelgaas@...gle.com>, Arnd Bergmann <arnd@...db.de>,
	Hauke Mehrtens <hauke@...ke-m.de>,
	Paul Bolle <pebolle@...cali.nl>
CC:	Florian Fainelli <f.fainelli@...il.com>,
	Dmitry Torokhov <dtor@...gle.com>,
	Anatol Pomazau <anatol@...gle.com>,
	Scott Branden <sbranden@...adcom.com>,
	<linux-pci@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>,
	<bcm-kernel-feedback-list@...adcom.com>,
	<devicetree@...r.kernel.org>
Subject: Re: [PATCH v4 3/4] pci: iproc: Add Broadcom iProc PCIe support

Sorry. I made a mistake. Please IGNORE this patch set. I'll re-send it
again with proper module changes applied.

Ray

On 3/9/2015 5:21 PM, Ray Jui wrote:
> This adds the support for Broadcom iProc PCIe controller
> 
> pcie-iproc.c servers as the common core driver, and front-end bus
> interface needs to be added to support different bus interfaces
> 
> pcie-iproc-pltfm.c contains the support for the platform bus interface
> 
> Signed-off-by: Ray Jui <rjui@...adcom.com>
> Reviewed-by: Scott Branden <sbraden@...adcom.com>
> ---
>  drivers/pci/host/Kconfig            |   17 ++
>  drivers/pci/host/Makefile           |    2 +
>  drivers/pci/host/pcie-iproc-pltfm.c |  101 +++++++++++
>  drivers/pci/host/pcie-iproc.c       |  337 +++++++++++++++++++++++++++++++++++
>  drivers/pci/host/pcie-iproc.h       |   39 ++++
>  5 files changed, 496 insertions(+)
>  create mode 100644 drivers/pci/host/pcie-iproc-pltfm.c
>  create mode 100644 drivers/pci/host/pcie-iproc.c
>  create mode 100644 drivers/pci/host/pcie-iproc.h
> 
> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> index 7b892a9..e10c3e3 100644
> --- a/drivers/pci/host/Kconfig
> +++ b/drivers/pci/host/Kconfig
> @@ -106,4 +106,21 @@ config PCI_VERSATILE
>  	bool "ARM Versatile PB PCI controller"
>  	depends on ARCH_VERSATILE
>  
> +config PCIE_IPROC
> +	bool "Broadcom iProc PCIe controller"
> +	help
> +	  This enables the iProc PCIe core controller support for Broadcom's
> +	  iProc family of SoCs. An appropriate bus interface driver also needs
> +	  to be enabled
> +
> +config PCIE_IPROC_PLTFM
> +	bool "Broadcom iProc PCIe platform bus driver"
> +	depends on ARCH_BCM_IPROC || COMPILE_TEST
> +	depends on OF
> +	select PCIE_IPROC
> +	default ARCH_BCM_IPROC
> +	help
> +	  Say Y here if you want to use the Broadcom iProc PCIe controller
> +	  through the generic platform bus interface
> +
>  endmenu
> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> index e61d91c..2e02d20 100644
> --- a/drivers/pci/host/Makefile
> +++ b/drivers/pci/host/Makefile
> @@ -13,3 +13,5 @@ obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
>  obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
>  obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
>  obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
> +obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
> +obj-$(CONFIG_PCIE_IPROC_PLTFM) += pcie-iproc-pltfm.o
> diff --git a/drivers/pci/host/pcie-iproc-pltfm.c b/drivers/pci/host/pcie-iproc-pltfm.c
> new file mode 100644
> index 0000000..20d5287
> --- /dev/null
> +++ b/drivers/pci/host/pcie-iproc-pltfm.c
> @@ -0,0 +1,101 @@
> +/*
> + * Copyright (C) 2015 Broadcom Corporation
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/pci.h>
> +#include <linux/clk.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/of_address.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +#include <linux/phy/phy.h>
> +
> +#include "pcie-iproc.h"
> +
> +static int __init iproc_pcie_pltfm_probe(struct platform_device *pdev)
> +{
> +	struct iproc_pcie *pcie;
> +	struct device_node *np = pdev->dev.of_node;
> +	struct resource reg;
> +	resource_size_t iobase = 0;
> +	LIST_HEAD(res);
> +	int ret;
> +
> +	pcie = devm_kzalloc(&pdev->dev, sizeof(struct iproc_pcie), GFP_KERNEL);
> +	if (!pcie)
> +		return -ENOMEM;
> +
> +	pcie->dev = &pdev->dev;
> +	platform_set_drvdata(pdev, pcie);
> +
> +	ret = of_address_to_resource(np, 0, &reg);
> +	if (ret < 0) {
> +		dev_err(pcie->dev, "unable to obtain controller resources\n");
> +		return ret;
> +	}
> +
> +	pcie->base = devm_ioremap(pcie->dev, reg.start, resource_size(&reg));
> +	if (!pcie->base) {
> +		dev_err(pcie->dev, "unable to map controller registers\n");
> +		return -ENOMEM;
> +	}
> +
> +	/* PHY use is optional */
> +	pcie->phy = devm_phy_get(&pdev->dev, "pcie-phy");
> +	if (IS_ERR(pcie->phy)) {
> +		if (PTR_ERR(pcie->phy) == -EPROBE_DEFER)
> +			return -EPROBE_DEFER;
> +		pcie->phy = NULL;
> +	}
> +
> +	ret = of_pci_get_host_bridge_resources(np, 0, 0xff, &res, &iobase);
> +	if (ret) {
> +		dev_err(pcie->dev,
> +			"unable to get PCI host bridge resources\n");
> +		return ret;
> +	}
> +
> +	pcie->resources = &res;
> +
> +	ret = iproc_pcie_setup(pcie);
> +	if (ret) {
> +		dev_err(pcie->dev, "PCIe controller setup failed\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id iproc_pcie_of_match_table[] = {
> +	{ .compatible = "brcm,iproc-pcie", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, iproc_pcie_of_match_table);
> +
> +static struct platform_driver iproc_pcie_pltfm_driver = {
> +	.driver = {
> +		.name = "iproc-pcie",
> +		.of_match_table = of_match_ptr(iproc_pcie_of_match_table),
> +		.suppress_bind_attrs = true,
> +	},
> +	.probe = iproc_pcie_pltfm_probe,
> +};
> +module_platform_driver(iproc_pcie_pltfm_driver);
> +
> +MODULE_AUTHOR("Ray Jui <rjui@...adcom.com>");
> +MODULE_DESCRIPTION("Broadcom iPROC PCIe platform driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/pci/host/pcie-iproc.c b/drivers/pci/host/pcie-iproc.c
> new file mode 100644
> index 0000000..36c3357
> --- /dev/null
> +++ b/drivers/pci/host/pcie-iproc.c
> @@ -0,0 +1,337 @@
> +/*
> + * Copyright (C) 2014 Hauke Mehrtens <hauke@...ke-m.de>
> + * Copyright (C) 2015 Broadcom Corporatcommon ion
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/pci.h>
> +#include <linux/msi.h>
> +#include <linux/clk.h>
> +#include <linux/module.h>
> +#include <linux/mbus.h>
> +#include <linux/slab.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/of_address.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +#include <linux/phy/phy.h>
> +
> +#include "pcie-iproc.h"
> +
> +#define CLK_CONTROL_OFFSET           0x000
> +#define EP_MODE_SURVIVE_PERST_SHIFT  1
> +#define EP_MODE_SURVIVE_PERST        BIT(EP_MODE_SURVIVE_PERST_SHIFT)
> +#define RC_PCIE_RST_OUTPUT_SHIFT     0
> +#define RC_PCIE_RST_OUTPUT           BIT(RC_PCIE_RST_OUTPUT_SHIFT)
> +
> +#define CFG_IND_ADDR_OFFSET          0x120
> +#define CFG_IND_ADDR_MASK            0x00001ffc
> +
> +#define CFG_IND_DATA_OFFSET          0x124
> +
> +#define CFG_ADDR_OFFSET              0x1f8
> +#define CFG_ADDR_BUS_NUM_SHIFT       20
> +#define CFG_ADDR_BUS_NUM_MASK        0x0ff00000
> +#define CFG_ADDR_DEV_NUM_SHIFT       15
> +#define CFG_ADDR_DEV_NUM_MASK        0x000f8000
> +#define CFG_ADDR_FUNC_NUM_SHIFT      12
> +#define CFG_ADDR_FUNC_NUM_MASK       0x00007000
> +#define CFG_ADDR_REG_NUM_SHIFT       2
> +#define CFG_ADDR_REG_NUM_MASK        0x00000ffc
> +#define CFG_ADDR_CFG_TYPE_SHIFT      0
> +#define CFG_ADDR_CFG_TYPE_MASK       0x00000003
> +
> +#define CFG_DATA_OFFSET              0x1fc
> +
> +#define SYS_RC_INTX_EN               0x330
> +#define SYS_RC_INTX_MASK             0xf
> +
> +static inline struct iproc_pcie *sys_to_pcie(struct pci_sys_data *sys)
> +{
> +	return sys->private_data;
> +}
> +
> +#define INVALID_ACCESS_OFFSET 0xffffffff
> +static u32 iproc_pcie_cfg_base(struct iproc_pcie *pcie, int busno,
> +			       unsigned int devfn, int where)
> +{
> +	int slot = PCI_SLOT(devfn);
> +	int fn = PCI_FUNC(devfn);
> +	u32 val;
> +
> +	/* root complex access */
> +	if (busno == 0) {
> +		if (slot >= 1)
> +			return INVALID_ACCESS_OFFSET;
> +		writel(where & CFG_IND_ADDR_MASK,
> +		       pcie->base + CFG_IND_ADDR_OFFSET);
> +		return CFG_IND_DATA_OFFSET;
> +	}
> +
> +	if (fn > 1)
> +		return INVALID_ACCESS_OFFSET;
> +
> +	/* EP device access */
> +	val = (busno << CFG_ADDR_BUS_NUM_SHIFT) |
> +		(slot << CFG_ADDR_DEV_NUM_SHIFT) |
> +		(fn << CFG_ADDR_FUNC_NUM_SHIFT) |
> +		(where & CFG_ADDR_REG_NUM_MASK) |
> +		(1 & CFG_ADDR_CFG_TYPE_MASK);
> +	writel(val, pcie->base + CFG_ADDR_OFFSET);
> +
> +	return CFG_DATA_OFFSET;
> +}
> +
> +#define INVALID_CFG_RD 0xffffffff
> +static int iproc_pcie_read_conf(struct iproc_pcie *pcie, int busno,
> +				unsigned int devfn, int where, int size,
> +				u32 *val)
> +{
> +	u32 offset, mask, shift;
> +
> +	*val = INVALID_CFG_RD;
> +
> +	if (size != 1 && size != 2 && size != 4)
> +		return PCIBIOS_BAD_REGISTER_NUMBER;
> +	else if ((size == 2) && (where & 1))
> +		return PCIBIOS_BAD_REGISTER_NUMBER;
> +	else if ((size == 4) && (where & 3))
> +		return PCIBIOS_BAD_REGISTER_NUMBER;
> +
> +	offset = iproc_pcie_cfg_base(pcie, busno, devfn, where);
> +	if (offset == INVALID_ACCESS_OFFSET)
> +		return PCIBIOS_BAD_REGISTER_NUMBER;
> +
> +	*val = readl(pcie->base + offset);
> +
> +	if (size != 4) {
> +		mask = (1 << (size * BITS_PER_BYTE)) - 1;
> +		shift = (where % 4) * BITS_PER_BYTE;
> +		*val = (*val >> shift) & mask;
> +	}
> +
> +	dev_dbg(pcie->dev,
> +		"conf rd: busn=%d devfn=%u where=%d size=%d val=0x%08x\n",
> +		busno, devfn, where, size, *val);
> +
> +	return PCIBIOS_SUCCESSFUL;
> +}
> +
> +static int iproc_pcie_write_conf(struct iproc_pcie *pcie, int busno,
> +				 unsigned int devfn, int where, int size,
> +				 u32 val)
> +{
> +	u32 offset, mask, shift, data;
> +
> +	if (size != 1 && size != 2 && size != 4)
> +		return PCIBIOS_BAD_REGISTER_NUMBER;
> +	else if ((size == 2) && (where & 1))
> +		return PCIBIOS_BAD_REGISTER_NUMBER;
> +	else if ((size == 4) && (where & 3))
> +		return PCIBIOS_BAD_REGISTER_NUMBER;
> +
> +	offset = iproc_pcie_cfg_base(pcie, busno, devfn, where);
> +	if (offset == INVALID_ACCESS_OFFSET)
> +		return PCIBIOS_BAD_REGISTER_NUMBER;
> +
> +	data = readl(pcie->base + offset);
> +
> +	if (size != 4) {
> +		mask = (1 << (size * BITS_PER_BYTE)) - 1;
> +		shift = (where % 4) * BITS_PER_BYTE;
> +		data &= ~(mask << shift);
> +		data |= (val & mask) << shift;
> +	} else {
> +		data = val;
> +	}
> +
> +	writel(data, pcie->base + offset);
> +
> +	dev_dbg(pcie->dev,
> +		"conf wr: busn=%d devfn=%u where=%d size=%d data=0x%08x\n",
> +		busno, devfn, where, size, data);
> +
> +	return PCIBIOS_SUCCESSFUL;
> +}
> +
> +static int iproc_pcie_read(struct pci_bus *bus, unsigned int devfn,
> +			   int where, int size, u32 *val)
> +{
> +	struct iproc_pcie *pcie = sys_to_pcie(bus->sysdata);
> +
> +	return iproc_pcie_read_conf(pcie, bus->number, devfn, where, size,
> +				    val);
> +}
> +
> +static int iproc_pcie_write(struct pci_bus *bus, unsigned int devfn,
> +			    int where, int size, u32 val)
> +{
> +	struct iproc_pcie *pcie = sys_to_pcie(bus->sysdata);
> +
> +	return iproc_pcie_write_conf(pcie, bus->number, devfn, where, size,
> +				     val);
> +}
> +
> +static struct pci_ops iproc_pcie_ops = {
> +	.read = iproc_pcie_read,
> +	.write = iproc_pcie_write,
> +};
> +
> +static void iproc_pcie_reset(struct iproc_pcie *pcie)
> +{
> +	u32 val;
> +
> +	/*
> +	 * Configure the PCIe controller as root complex and send a downstream
> +	 * reset
> +	 */
> +	val = EP_MODE_SURVIVE_PERST | RC_PCIE_RST_OUTPUT;
> +	writel(val, pcie->base + CLK_CONTROL_OFFSET);
> +	udelay(250);
> +	val &= ~EP_MODE_SURVIVE_PERST;
> +	writel(val, pcie->base + CLK_CONTROL_OFFSET);
> +	msleep(250);
> +}
> +
> +static int iproc_pcie_check_link(struct iproc_pcie *pcie, struct pci_bus *bus)
> +{
> +	u8 hdr_type;
> +	u32 link_ctrl;
> +	u16 pos, link_status;
> +	int link_is_active = 0;
> +
> +	/* make sure we are not in EP mode */
> +	pci_bus_read_config_byte(bus, 0, PCI_HEADER_TYPE, &hdr_type);
> +	if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE) {
> +		dev_err(pcie->dev, "in EP mode, hdr=0x08%x\n", hdr_type);
> +		return -EFAULT;
> +	}
> +
> +	/* force class to PCI_CLASS_BRIDGE_PCI (0x0604) */
> +	pci_bus_write_config_word(bus, 0, PCI_CLASS_DEVICE,
> +				  PCI_CLASS_BRIDGE_PCI);
> +
> +	/* check link status to see if link is active */
> +	pos = pci_bus_find_capability(bus, 0, PCI_CAP_ID_EXP);
> +	pci_bus_read_config_word(bus, 0, pos + PCI_EXP_LNKSTA, &link_status);
> +	if (link_status & PCI_EXP_LNKSTA_NLW)
> +		link_is_active = 1;
> +
> +	if (!link_is_active) {
> +		/* try GEN 1 link speed */
> +#define PCI_LINK_STATUS_CTRL_2_OFFSET 0x0dc
> +#define PCI_TARGET_LINK_SPEED_MASK    0xf
> +#define PCI_TARGET_LINK_SPEED_GEN2    0x2
> +#define PCI_TARGET_LINK_SPEED_GEN1    0x1
> +		pci_bus_read_config_dword(bus, 0,
> +					  PCI_LINK_STATUS_CTRL_2_OFFSET,
> +					  &link_ctrl);
> +		if ((link_ctrl & PCI_TARGET_LINK_SPEED_MASK) ==
> +		    PCI_TARGET_LINK_SPEED_GEN2) {
> +			link_ctrl &= ~PCI_TARGET_LINK_SPEED_MASK;
> +			link_ctrl |= PCI_TARGET_LINK_SPEED_GEN1;
> +			pci_bus_write_config_dword(bus, 0,
> +					   PCI_LINK_STATUS_CTRL_2_OFFSET,
> +					   link_ctrl);
> +			msleep(100);
> +
> +			pos = pci_bus_find_capability(bus, 0, PCI_CAP_ID_EXP);
> +			pci_bus_read_config_word(bus, 0, pos + PCI_EXP_LNKSTA,
> +						 &link_status);
> +			if (link_status & PCI_EXP_LNKSTA_NLW)
> +				link_is_active = 1;
> +		}
> +	}
> +
> +	dev_info(pcie->dev, "link: %s\n", link_is_active ? "UP" : "DOWN");
> +
> +	return link_is_active ? 0 : -ENODEV;
> +}
> +
> +static void iproc_pcie_enable(struct iproc_pcie *pcie)
> +{
> +	writel(SYS_RC_INTX_MASK, pcie->base + SYS_RC_INTX_EN);
> +}
> +
> +int iproc_pcie_setup(struct iproc_pcie *pcie)
> +{
> +	int ret;
> +	struct pci_bus *bus;
> +
> +	if (!pcie || !pcie->dev || !pcie->base)
> +		return -EINVAL;
> +
> +	if (pcie->phy) {
> +		ret = phy_init(pcie->phy);
> +		if (ret) {
> +			dev_err(pcie->dev, "unable to initialize PCIe PHY\n");
> +			return ret;
> +		}
> +
> +		ret = phy_power_on(pcie->phy);
> +		if (ret) {
> +			dev_err(pcie->dev, "unable to power on PCIe PHY\n");
> +			goto err_exit_phy;
> +		}
> +
> +	}
> +
> +	iproc_pcie_reset(pcie);
> +
> +	pcie->sysdata.private_data = pcie;
> +
> +	bus = pci_create_root_bus(pcie->dev, 0, &iproc_pcie_ops,
> +				  &pcie->sysdata, pcie->resources);
> +	if (!bus) {
> +		dev_err(pcie->dev, "unable to create PCI root bus\n");
> +		ret = -ENOMEM;
> +		goto err_power_off_phy;
> +	}
> +
> +	ret = iproc_pcie_check_link(pcie, bus);
> +	if (ret) {
> +		dev_err(pcie->dev, "no PCIe EP device detected\n");
> +		goto err_rm_root_bus;
> +	}
> +
> +	iproc_pcie_enable(pcie);
> +
> +	pci_scan_child_bus(bus);
> +	pci_assign_unassigned_bus_resources(bus);
> +	pci_bus_add_devices(bus);
> +
> +	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
> +
> +	return 0;
> +
> +err_rm_root_bus:
> +	pci_lock_rescan_remove();
> +	pci_stop_root_bus(bus);
> +	pci_remove_root_bus(bus);
> +	pci_unlock_rescan_remove();
> +
> +err_power_off_phy:
> +	if (pcie->phy)
> +		phy_power_off(pcie->phy);
> +err_exit_phy:
> +	if (pcie->phy)
> +		phy_exit(pcie->phy);
> +
> +	return ret;
> +}
> +
> +MODULE_AUTHOR("Ray Jui <rjui@...adcom.com>");
> +MODULE_DESCRIPTION("Broadcom iPROC PCIe common driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/pci/host/pcie-iproc.h b/drivers/pci/host/pcie-iproc.h
> new file mode 100644
> index 0000000..4e2437e
> --- /dev/null
> +++ b/drivers/pci/host/pcie-iproc.h
> @@ -0,0 +1,39 @@
> +/*
> + * Copyright (C) 2014-2015 Broadcom Corporation
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef _PCIE_IPROC_H
> +#define _PCIE_IPROC_H
> +
> +#define IPROC_PCIE_MAX_NUM_IRQS 6
> +
> +/**
> + * iProc PCIe device
> + * @dev: pointer to device data structure
> + * @base: PCIe host controller I/O register base
> + * @resources: linked list of all PCI resources
> + * @sysdata: Per PCI controller data
> + * @phy: optional PHY device that controls the Serdes
> + * @irqs: interrupt IDs
> + */
> +struct iproc_pcie {
> +	struct device *dev;
> +	void __iomem *base;
> +	struct list_head *resources;
> +	struct pci_sys_data sysdata;
> +	struct phy *phy;
> +	int irqs[IPROC_PCIE_MAX_NUM_IRQS];
> +};
> +
> +extern int iproc_pcie_setup(struct iproc_pcie *pcie);
> +
> +#endif /* _PCIE_IPROC_H */
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ