early console in setup code Probing EDD (edd=off to disable)... ok early console in decompress_kernel Decompressing Linux... Parsing ELF... done. Booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 4.0.0-rc1-00011-g811bf96 (kbuild@roam) (gcc version 4.9.2 (Debian 4.9.2-10) ) #7 SMP Sat Mar 14 02:59:14 CST 2015 [ 0.000000] Command line: user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-4/rand_boot-1-yocto-minimal-x86_64.cgz-x86_64-rhel-811bf9624b53f3cb8e78120c5bbbcde880416645-1-20150314-49393-1nmfnrq.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/811bf9624b53f3cb8e78120c5bbbcde880416645/vmlinuz-4.0.0-rc1-00011-g811bf96 kconfig=x86_64-rhel commit=811bf9624b53f3cb8e78120c5bbbcde880416645 branch=xen-tip/devel/for-linus-4.1 root=/dev/ram0 max_uptime=3600 RESULT_ROOT=/result/vm-kbuild-yocto-x86_64/boot/1/yocto-minimal-x86_64.cgz/x86_64-rhel/811bf9624b53f3cb8e78120c5bbbcde880416645/0 ip=::::vm-kbuild-yocto-x86_64-4::dhcp earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013fdffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013fe0000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x13fe0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000f0ec0-0x000f0ecf] mapped at [ffff8800000f0ec0] [ 0.000000] mpc: f0ed0-f0fa8 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x021ed000, 0x021edfff] PGTABLE [ 0.000000] BRK [0x021ee000, 0x021eefff] PGTABLE [ 0.000000] BRK [0x021ef000, 0x021effff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x12200000-0x123fffff] [ 0.000000] [mem 0x12200000-0x123fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x121fffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x121fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x12400000-0x13fdffff] [ 0.000000] [mem 0x12400000-0x13dfffff] page 2M [ 0.000000] [mem 0x13e00000-0x13fdffff] page 4k [ 0.000000] BRK [0x021f0000, 0x021f0fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x124a4000-0x13fd7fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0CE0 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x0000000013FE1854 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x0000000013FE0B37 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x0000000013FE0040 000AF7 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x0000000013FE0000 000040 [ 0.000000] ACPI: SSDT 0x0000000013FE0BAB 000BF9 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x0000000013FE17A4 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x0000000013FE181C 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Setting APIC routing to Xen PV. [ 0.000000] mapped APIC to ffffffffff57c000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000013fdffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x1247e000-0x124a3fff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:123fe001, primary cpu clock [ 0.000000] [ffffea0000000000-ffffea00005fffff] PMD -> [ffff880011400000-ffff8800119fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x0000000013fdffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000013fdffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000013fdffff] [ 0.000000] On node 0 totalpages: 81790 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1216 pages used for memmap [ 0.000000] DMA32 zone: 77792 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57c000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff57b000 (fec00000) [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff880012000000 s93464 r8192 d29416 u2097152 [ 0.000000] pcpu-alloc: s93464 r8192 d29416 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 1200e240 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 80489 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-4/rand_boot-1-yocto-minimal-x86_64.cgz-x86_64-rhel-811bf9624b53f3cb8e78120c5bbbcde880416645-1-20150314-49393-1nmfnrq.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/811bf9624b53f3cb8e78120c5bbbcde880416645/vmlinuz-4.0.0-rc1-00011-g811bf96 kconfig=x86_64-rhel commit=811bf9624b53f3cb8e78120c5bbbcde880416645 branch=xen-tip/devel/for-linus-4.1 root=/dev/ram0 max_uptime=3600 RESULT_ROOT=/result/vm-kbuild-yocto-x86_64/boot/1/yocto-minimal-x86_64.cgz/x86_64-rhel/811bf9624b53f3cb8e78120c5bbbcde880416645/0 ip=::::vm-kbuild-yocto-x86_64-4::dhcp earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Memory: 273664K/327160K available (8927K kernel code, 1695K rwdata, 4004K rodata, 1796K init, 1876K bss, 53496K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:524544 nr_irqs:256 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 4.0.0-rc1-00011-g811bf96 (kbuild@roam) (gcc version 4.9.2 (Debian 4.9.2-10) ) #7 SMP Sat Mar 14 02:59:14 CST 2015 [ 0.000000] Command line: user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-4/rand_boot-1-yocto-minimal-x86_64.cgz-x86_64-rhel-811bf9624b53f3cb8e78120c5bbbcde880416645-1-20150314-49393-1nmfnrq.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/811bf9624b53f3cb8e78120c5bbbcde880416645/vmlinuz-4.0.0-rc1-00011-g811bf96 kconfig=x86_64-rhel commit=811bf9624b53f3cb8e78120c5bbbcde880416645 branch=xen-tip/devel/for-linus-4.1 root=/dev/ram0 max_uptime=3600 RESULT_ROOT=/result/vm-kbuild-yocto-x86_64/boot/1/yocto-minimal-x86_64.cgz/x86_64-rhel/811bf9624b53f3cb8e78120c5bbbcde880416645/0 ip=::::vm-kbuild-yocto-x86_64-4::dhcp earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013fdffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013fe0000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x13fe0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000f0ec0-0x000f0ecf] mapped at [ffff8800000f0ec0] [ 0.000000] mpc: f0ed0-f0fa8 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x021ed000, 0x021edfff] PGTABLE [ 0.000000] BRK [0x021ee000, 0x021eefff] PGTABLE [ 0.000000] BRK [0x021ef000, 0x021effff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x12200000-0x123fffff] [ 0.000000] [mem 0x12200000-0x123fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x121fffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x121fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x12400000-0x13fdffff] [ 0.000000] [mem 0x12400000-0x13dfffff] page 2M [ 0.000000] [mem 0x13e00000-0x13fdffff] page 4k [ 0.000000] BRK [0x021f0000, 0x021f0fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x124a4000-0x13fd7fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0CE0 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x0000000013FE1854 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x0000000013FE0B37 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x0000000013FE0040 000AF7 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x0000000013FE0000 000040 [ 0.000000] ACPI: SSDT 0x0000000013FE0BAB 000BF9 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0x0000000013FE17A4 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x0000000013FE181C 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Setting APIC routing to Xen PV. [ 0.000000] mapped APIC to ffffffffff57c000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000013fdffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x1247e000-0x124a3fff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:123fe001, primary cpu clock [ 0.000000] [ffffea0000000000-ffffea00005fffff] PMD -> [ffff880011400000-ffff8800119fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x0000000013fdffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000013fdffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000013fdffff] [ 0.000000] On node 0 totalpages: 81790 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1216 pages used for memmap [ 0.000000] DMA32 zone: 77792 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff57c000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff57b000 (fec00000) [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff880012000000 s93464 r8192 d29416 u2097152 [ 0.000000] pcpu-alloc: s93464 r8192 d29416 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 1200e240 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 80489 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-4/rand_boot-1-yocto-minimal-x86_64.cgz-x86_64-rhel-811bf9624b53f3cb8e78120c5bbbcde880416645-1-20150314-49393-1nmfnrq.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/811bf9624b53f3cb8e78120c5bbbcde880416645/vmlinuz-4.0.0-rc1-00011-g811bf96 kconfig=x86_64-rhel commit=811bf9624b53f3cb8e78120c5bbbcde880416645 branch=xen-tip/devel/for-linus-4.1 root=/dev/ram0 max_uptime=3600 RESULT_ROOT=/result/vm-kbuild-yocto-x86_64/boot/1/yocto-minimal-x86_64.cgz/x86_64-rhel/811bf9624b53f3cb8e78120c5bbbcde880416645/0 ip=::::vm-kbuild-yocto-x86_64-4::dhcp earlyprintk=ttyS0,115200 rd.udev.log-priority=err systemd.log_target=journal systemd.log_level=warning debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Memory: 273664K/327160K available (8927K kernel code, 1695K rwdata, 4004K rodata, 1796K init, 1876K bss, 53496K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:524544 nr_irqs:256 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] bootconsole [earlyser0] disabled [ 0.000000] console [ttyS0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2693.508 MHz processor [ 0.003000] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=2693508) [ 0.003004] pid_max: default: 32768 minimum: 301 [ 0.003561] ACPI: Core revision 20150204 [ 0.005856] ACPI: All ACPI Tables successfully acquired [ 0.006557] Security Framework initialized [ 0.007008] SELinux: Initializing. [ 0.008008] SELinux: Starting in permissive mode [ 0.009039] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.010101] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.011046] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.012005] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.013153] Initializing cgroup subsys blkio [ 0.014005] Initializing cgroup subsys memory [ 0.015011] Initializing cgroup subsys devices [ 0.016005] Initializing cgroup subsys freezer [ 0.017014] Initializing cgroup subsys net_cls [ 0.018007] Initializing cgroup subsys perf_event [ 0.019007] Initializing cgroup subsys hugetlb [ 0.020094] mce: CPU supports 10 MCE banks [ 0.021047] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.022005] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.041151] Freeing SMP alternatives memory: 32K (ffffffff8200e000 - ffffffff82016000) [ 0.047669] ftrace: allocating 31817 entries in 125 pages [ 0.057055] Getting VERSION: 0 [ 0.058004] ------------[ cut here ]------------ [ 0.059017] WARNING: CPU: 0 PID: 1 at arch/x86/xen/apic.c:76 xen_apic_write+0x28/0x30() [ 0.060003] register: 30, value: ff00ff [ 0.060860] Modules linked in: [ 0.061470] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.0.0-rc1-00011-g811bf96 #7 [ 0.062003] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 0.063003] ffffffff81b7bfa0 ffff880011e63d68 ffffffff818aaa49 0000000000000a08 [ 0.065004] ffff880011e63db8 ffff880011e63da8 ffffffff8107272a 0000000000000000 [ 0.067003] 0000000000000000 000000000000a108 000000000000a110 0000000000000001 [ 0.069003] Call Trace: [ 0.070007] [] dump_stack+0x4c/0x65 [ 0.071006] [] warn_slowpath_common+0x8a/0xc0 [ 0.072005] [] warn_slowpath_fmt+0x46/0x50 [ 0.073005] [] xen_apic_write+0x28/0x30 [ 0.074006] [] verify_local_APIC+0x4e/0x1b7 [ 0.075007] [] native_smp_prepare_cpus+0x221/0x2c7 [ 0.076006] [] kernel_init_freeable+0xfb/0x248 [ 0.077006] [] ? rest_init+0x90/0x90 [ 0.078005] [] kernel_init+0xe/0xf0 [ 0.079005] [] ret_from_fork+0x7c/0xb0 [ 0.080005] [] ? rest_init+0x90/0x90 [ 0.081006] ---[ end trace 4f43b2a59b6f8b66 ]--- [ 0.082003] Getting VERSION: 0 [ 0.083143] x2apic enabled [ 0.084003] Switched APIC routing to physical x2apic. [ 0.085085] enabled ExtINT on CPU#0 [ 0.086653] ENABLING IO-APIC IRQs [ 0.087005] init IO_APIC IRQs [ 0.088003] apic 0 pin 0 not connected [ 0.089010] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:0) [ 0.090018] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0) [ 0.091017] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0) [ 0.092016] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:0) [ 0.093027] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:0) [ 0.094027] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:0) [ 0.095034] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:0) [ 0.096019] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:0) [ 0.097020] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:0) [ 0.098022] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:0) [ 0.099018] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:0) [ 0.100018] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:0) [ 0.101025] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:0) [ 0.102027] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:0) [ 0.103024] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:0) [ 0.104017] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:0) [ 0.105016] apic 0 pin 16 not connected [ 0.106003] apic 0 pin 17 not connected [ 0.107002] apic 0 pin 18 not connected [ 0.108003] apic 0 pin 19 not connected [ 0.109002] apic 0 pin 20 not connected [ 0.110003] apic 0 pin 21 not connected [ 0.111002] apic 0 pin 22 not connected [ 0.112002] apic 0 pin 23 not connected [ 0.113136] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.114020] TSC deadline timer enabled [ 0.114870] smpboot: CPU0: Intel Xeon E312xx (Sandy Bridge) (fam: 06, model: 2a, stepping: 01) [ 0.115624] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only. [ 0.117727] x86: Booted up 1 node, 1 CPUs [ 0.118006] smpboot: Total of 1 processors activated (5387.01 BogoMIPS) [ 0.119315] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.120074] devtmpfs: initialized [ 0.122819] evm: security.selinux [ 0.123003] evm: security.ima [ 0.123743] evm: security.capability [ 0.124252] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 0.125121] NET: Registered protocol family 16 [ 0.126246] cpuidle: using governor menu [ 0.127158] ACPI: bus type PCI registered [ 0.128004] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.129114] PCI: Using configuration type 1 for base access [ 0.131159] ACPI: Added _OSI(Module Device) [ 0.132004] ACPI: Added _OSI(Processor Device) [ 0.132874] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.133004] ACPI: Added _OSI(Processor Aggregator Device) [ 0.134336] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:0) [ 0.135675] ACPI: Interpreter enabled [ 0.136007] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580) [ 0.137866] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580) [ 0.139906] ACPI: (supports S0 S3 S4 S5) [ 0.140004] ACPI: Using IOAPIC for interrupt routing [ 0.141020] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.145232] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.146011] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.147009] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.148103] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.149358] acpiphp: Slot [3] registered [ 0.150031] acpiphp: Slot [4] registered [ 0.151024] acpiphp: Slot [5] registered [ 0.152025] acpiphp: Slot [6] registered [ 0.153033] acpiphp: Slot [7] registered [ 0.154038] acpiphp: Slot [8] registered [ 0.155038] acpiphp: Slot [9] registered [ 0.156037] acpiphp: Slot [10] registered [ 0.157025] acpiphp: Slot [11] registered [ 0.158037] acpiphp: Slot [12] registered [ 0.159028] acpiphp: Slot [13] registered [ 0.160038] acpiphp: Slot [14] registered [ 0.161037] acpiphp: Slot [15] registered [ 0.162032] acpiphp: Slot [16] registered [ 0.163024] acpiphp: Slot [17] registered [ 0.164037] acpiphp: Slot [18] registered [ 0.165035] acpiphp: Slot [19] registered [ 0.166036] acpiphp: Slot [20] registered [ 0.167036] acpiphp: Slot [21] registered [ 0.168029] acpiphp: Slot [22] registered [ 0.169037] acpiphp: Slot [23] registered [ 0.170037] acpiphp: Slot [24] registered [ 0.171027] acpiphp: Slot [25] registered [ 0.172025] acpiphp: Slot [26] registered [ 0.173032] acpiphp: Slot [27] registered [ 0.174036] acpiphp: Slot [28] registered [ 0.175029] acpiphp: Slot [29] registered [ 0.176038] acpiphp: Slot [30] registered [ 0.177025] acpiphp: Slot [31] registered [ 0.178018] PCI host bridge to bus 0000:00 [ 0.179006] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.180005] pci_bus 0000:00: root bus resource [io 0x0cf8-0x0cff] [ 0.181007] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.182007] pci_bus 0000:00: root bus resource [io 0x0d00-0xadff window] [ 0.183005] pci_bus 0000:00: root bus resource [io 0xae0f-0xaeff window] [ 0.184007] pci_bus 0000:00: root bus resource [io 0xaf20-0xafdf window] [ 0.185007] pci_bus 0000:00: root bus resource [io 0xafe4-0xffff window] [ 0.186005] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.187005] pci_bus 0000:00: root bus resource [mem 0x14000000-0xfebfffff window] [ 0.188039] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.189396] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.190529] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.194391] pci 0000:00:01.1: reg 0x20: [io 0xc080-0xc08f] [ 0.196026] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.197004] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.198004] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.199004] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.200165] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.201306] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI [ 0.202012] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB [ 0.203186] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.205007] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref] [ 0.207006] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff] [ 0.213006] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.214155] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.216005] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff] [ 0.218005] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.224006] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.225161] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.227005] pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc07f] [ 0.229005] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff] [ 0.235247] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000 [ 0.236590] pci 0000:00:05.0: reg 0x10: [mem 0xfebf2000-0xfebf200f] [ 0.240603] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.241899] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.242891] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.243897] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.244838] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.245889] ACPI: Enabled 16 GPEs in block 00 to 0F [ 0.246120] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.247000] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.247004] vgaarb: loaded [ 0.247707] vgaarb: bridge control possible 0000:00:02.0 [ 0.248083] SCSI subsystem initialized [ 0.248928] ACPI: bus type USB registered [ 0.249020] usbcore: registered new interface driver usbfs [ 0.249953] usbcore: registered new interface driver hub [ 0.250015] usbcore: registered new device driver usb [ 0.250954] pps_core: LinuxPPS API ver. 1 registered [ 0.251003] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.252008] PTP clock support registered [ 0.253058] PCI: Using ACPI for IRQ routing [ 0.253871] PCI: pci_cache_line_size set to 64 bytes [ 0.254159] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.255005] e820: reserve RAM buffer [mem 0x13fe0000-0x13ffffff] [ 0.256124] NetLabel: Initializing [ 0.256864] NetLabel: domain hash size = 128 [ 0.257003] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.257950] NetLabel: unlabeled traffic allowed by default [ 0.258128] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.259015] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.260004] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.265025] Switched to clocksource kvm-clock [ 0.272955] pnp: PnP ACPI init [ 0.273774] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:0) [ 0.275428] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.276562] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:0) [ 0.278203] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.279257] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:0) [ 0.280890] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.281957] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:0) [ 0.283512] pnp 00:03: [dma 2] [ 0.284275] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.285348] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:0) [ 0.286890] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.287960] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:0) [ 0.289520] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.290797] pnp: PnP ACPI: found 6 devices [ 0.297154] pci_bus 0000:00: resource 4 [io 0x0cf8-0x0cff] [ 0.298153] pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7 window] [ 0.299267] pci_bus 0000:00: resource 6 [io 0x0d00-0xadff window] [ 0.300325] pci_bus 0000:00: resource 7 [io 0xae0f-0xaeff window] [ 0.301393] pci_bus 0000:00: resource 8 [io 0xaf20-0xafdf window] [ 0.302461] pci_bus 0000:00: resource 9 [io 0xafe4-0xffff window] [ 0.303538] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff window] [ 0.304642] pci_bus 0000:00: resource 11 [mem 0x14000000-0xfebfffff window] [ 0.305887] NET: Registered protocol family 2 [ 0.306915] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.308083] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 0.309191] TCP: Hash tables configured (established 4096 bind 4096) [ 0.310749] TCP: reno registered [ 0.311865] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.313306] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.314839] NET: Registered protocol family 1 [ 0.316180] RPC: Registered named UNIX socket transport module. [ 0.317648] RPC: Registered udp transport module. [ 0.318943] RPC: Registered tcp transport module. [ 0.320220] RPC: Registered tcp NFSv4.1 backchannel transport module