linux-kernel - Re: [RFC][PATCH 2/2] phy: miphy365x: Convert to use phy.h instead of phy-miphy365x.h

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date:	Thu, 26 Mar 2015 09:48:31 +0100
From:	Patrice Chotard <patrice.chotard@...com>
To:	Kishon Vijay Abraham I <kishon@...com>,
	Axel Lin <axel.lin@...ics.com>
CC:	Gabriel FERNANDEZ <gabriel.fernandez@...com>,
	Lee Jones <lee.jones@...aro.org>,
	Alexandre Torgue <alexandre.torgue@...com>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	<devicetree@...r.kernel.org>, Rob Herring <robh+dt@...nel.org>,
	Maxime Coquelin <maxime.coquelin@...com>,
	Srinivas Kandagatla <srinivas.kandagatla@...il.com>
Subject: Re: [RFC][PATCH 2/2] phy: miphy365x: Convert to use phy.h instead
 of phy-miphy365x.h

Hi Kishon

On 03/26/2015 12:11 AM, Kishon Vijay Abraham I wrote:
> +Maxime, Srinivas, patrice
>
> On Monday 09 March 2015 06:55 PM, Axel Lin wrote:
>> 2015-03-09 19:44 GMT+08:00 Kishon Vijay Abraham I <kishon@...com>:
>>> Hi,
>>>
>>>
>>> On Thursday 05 March 2015 07:27 AM, Axel Lin wrote:
>>>> The defines in phy-miphy365x.h are all covered in phy.h:
>>>>
>>>> MIPHY_TYPE_SATA == PHY_TYPE_STA
>>>> MIPHY_TYPE_PCIE == PHY_TYPE_PCIE
>>>> MIPPHY_TYPE_USB == PHY_TYPE_USB2
>>>>
>>>> So covert to use phy.h and then delete phy-miphy365x.h.
>>>>
>>>> Signed-off-by: Axel Lin <axel.lin@...ics.com>
>>>> ---
>>>>    Documentation/devicetree/bindings/ata/ahci-st.txt       |  2 +-
>>>>    Documentation/devicetree/bindings/phy/phy-miphy365x.txt |  8 ++++----
>>>>    arch/arm/boot/dts/stih416.dtsi                          |  4 ++--
>>>>    drivers/phy/phy-miphy365x.c                             | 14
>>>> +++++++-------
>>>>    include/dt-bindings/phy/phy-miphy365x.h                 | 14
>>>> --------------
>>>>    5 files changed, 14 insertions(+), 28 deletions(-)
>>>>    delete mode 100644 include/dt-bindings/phy/phy-miphy365x.h
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/ata/ahci-st.txt
>>>> b/Documentation/devicetree/bindings/ata/ahci-st.txt
>>>> index 0574a77..070748b 100644
>>>> --- a/Documentation/devicetree/bindings/ata/ahci-st.txt
>>>> +++ b/Documentation/devicetree/bindings/ata/ahci-st.txt
>>>> @@ -21,7 +21,7 @@ Example:
>>>>                  reg             = <0xfe380000 0x1000>;
>>>>                  interrupts      = <GIC_SPI 157 IRQ_TYPE_NONE>;
>>>>                  interrupt-names = "hostc";
>>>> -               phys            = <&miphy365x_phy MIPHY_PORT_0
>>>> MIPHY_TYPE_SATA>;
>>>> +               phys            = <&miphy365x_phy MIPHY_PORT_0
>>>> PHY_TYPE_SATA>;
>>>>                  phy-names       = "ahci_phy";
>>>>                  resets          = <&powerdown STIH416_SATA0_POWERDOWN>,
>>>>                                    <&softreset STIH416_SATA0_SOFTRESET>;
>>>> diff --git a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
>>>> b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
>>>> index 9802d5d..087294d 100644
>>>> --- a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
>>>> +++ b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
>>>> @@ -20,8 +20,8 @@ Required nodes        :  A sub-node is required for each
>>>> channel the controller
>>>>    Required properties (port (child) node):
>>>>    - #phy-cells  : Should be 1 (See second example)
>>>>                    Cell after port phandle is device type from:
>>>> -                       - MIPHY_TYPE_SATA
>>>> -                       - MIPHY_TYPE_PCI
>>>> +                       - PHY_TYPE_SATA
>>>> +                       - PHY_TYPE_PCIE
>>>>    - reg         : Address and length of register sets for each device in
>>>>                    "reg-names"
>>>>    - reg-names     : The names of the register addresses corresponding to
>>>> the
>>>> @@ -68,10 +68,10 @@ property, containing a phandle to the phy port node
>>>> and a device type.
>>>>
>>>>    Example:
>>>>
>>>> -#include <dt-bindings/phy/phy-miphy365x.h>
>>>> +#include <dt-bindings/phy/phy.h>
>>>>
>>>>          sata0: sata@...80000 {
>>>>                  ...
>>>> -               phys      = <&phy_port0 MIPHY_TYPE_SATA>;
>>>> +               phys      = <&phy_port0 PHY_TYPE_SATA>;
>>>>                  ...
>>>>          };
>>>> diff --git a/arch/arm/boot/dts/stih416.dtsi
>>>> b/arch/arm/boot/dts/stih416.dtsi
>>>> index ea28eba..eeb7afe 100644
>>>> --- a/arch/arm/boot/dts/stih416.dtsi
>>>> +++ b/arch/arm/boot/dts/stih416.dtsi
>>>
>>> Can you split the patch so that I can queue the PHY part?
>> In my opinion, apply the patch as is should be fine and we don't have any
>> build breakage. I think the change in each file is pretty trivial and won't
>> cause problem. otherwise, I will have to send patches for the conversion
>> in each file and then wait until all patches are merged. Then send another
>> patch to delete include/dt-bindings/phy/phy-miphy365x.h.
> Okay. I can queue after getting Ack from arch/arm/boot/dts/sti* maintainers.


Acked-by: Patrice Chotard <patrice.chotard@...com>


Thanks

Patrice

>
> Cheers
> Kishon

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/