| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 8 Apr 2015 18:53:48 -0700
From: Matthew Garrett <mjg59@...eos.com>
To: perex@...ex.cz
Cc: tiwai@...e.de, alsa-devel@...a-project.org,
linux-kernel@...r.kernel.org, Matthew Garrett <mjg59@...eos.com>
Subject: [PATCH] ALSA: hda - make power_save threshold per-codec
Modern hardware will often have multiple HDA devices, and the desired
power saving configuration may vary depending on the codecs attached to
each of them. Push the power_save value down to the individual codec
structures, keeping the module parameter as a global control mechanism
for compatibility purposes.
Signed-off-by: Matthew Garrett <mjg59@...eos.com>
---
Documentation/sound/alsa/HD-Audio.txt | 5 +++--
sound/pci/hda/hda_codec.c | 28 ++++++++++++++++++++--------
sound/pci/hda/hda_codec.h | 19 ++++---------------
sound/pci/hda/hda_controller.c | 6 +++---
sound/pci/hda/hda_controller.h | 2 +-
sound/pci/hda/hda_intel.c | 7 +++----
sound/pci/hda/hda_sysfs.c | 30 ++++++++++++++++++++++++++++++
sound/pci/hda/hda_tegra.c | 4 ++--
8 files changed, 66 insertions(+), 35 deletions(-)
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index 42a0a39..99f2fb8 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -569,8 +569,9 @@ Power-Saving
The power-saving is a kind of auto-suspend of the device. When the
device is inactive for a certain time, the device is automatically
turned off to save the power. The time to go down is specified via
-`power_save` module option, and this option can be changed dynamically
-via sysfs.
+`power_save` module option. This option can be changed dynamically
+via sysfs, either globally (via /sys/module/snd_hda_*/parameters/power_save)
+or per-codec (via the power_save sysfs parameter in the codec directory)
The power-saving won't work when the analog loopback is enabled on
some codecs. Make sure that you mute all unneeded signal routes when
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 2fe86d2..5e8394a 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -895,7 +895,6 @@ int snd_hda_bus_new(struct snd_card *card,
bus->private_data = temp->private_data;
bus->pci = temp->pci;
bus->modelname = temp->modelname;
- bus->power_save = temp->power_save;
bus->ops = temp->ops;
mutex_init(&bus->cmd_mutex);
@@ -1436,8 +1435,9 @@ static void snd_hda_codec_dev_release(struct device *dev)
* Returns 0 if successful, or a negative error code.
*/
int snd_hda_codec_new(struct hda_bus *bus,
- unsigned int codec_addr,
- struct hda_codec **codecp)
+ unsigned int codec_addr,
+ struct hda_codec **codecp,
+ int power_save)
{
struct hda_codec *codec;
char component[31];
@@ -1495,6 +1495,7 @@ int snd_hda_codec_new(struct hda_bus *bus,
INIT_DELAYED_WORK(&codec->jackpoll_work, hda_jackpoll_work);
codec->depop_delay = -1;
+ codec->power_save = power_save;
codec->fixup_id = HDA_FIXUP_ID_NOT_SET;
#ifdef CONFIG_PM
@@ -5112,23 +5113,34 @@ static void __snd_hda_power_up(struct hda_codec *codec, bool wait_power_down)
codec->power_transition = 0;
}
-#define power_save(codec) \
- ((codec)->bus->power_save ? *(codec)->bus->power_save : 0)
-
/* Transition to powered down */
static void __snd_hda_power_down(struct hda_codec *codec)
{
if (!codec->power_on || codec->power_count || codec->power_transition)
return;
- if (power_save(codec)) {
+ if (codec->power_save >= 0) {
codec->power_transition = -1; /* avoid reentrance */
queue_delayed_work(codec->bus->workq, &codec->power_work,
- msecs_to_jiffies(power_save(codec) * 1000));
+ msecs_to_jiffies(codec->power_save * 1000));
}
}
/**
+ *
+ * snd_hda_power_save_set - set the power-down time for the codec
+ *
+ * @codec: HD-audio codec
+ * @value: seconds to wait before powering down the codec
+ */
+void snd_hda_power_save_set(struct hda_codec *codec, int value)
+{
+ codec->power_save = value;
+ snd_hda_power_save(codec, 0, false);
+}
+EXPORT_SYMBOL_GPL(snd_hda_power_save_set);
+
+/**
* snd_hda_power_save - Power-up/down/sync the codec
* @codec: HD-audio codec
* @delta: the counter delta to change
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 9c8820f..faaab58 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -106,7 +106,6 @@ struct hda_bus_template {
void *private_data;
struct pci_dev *pci;
const char *modelname;
- int *power_save;
struct hda_bus_ops ops;
};
@@ -123,7 +122,6 @@ struct hda_bus {
void *private_data;
struct pci_dev *pci;
const char *modelname;
- int *power_save;
struct hda_bus_ops ops;
/* codec linked list */
@@ -398,6 +396,7 @@ struct hda_codec {
struct snd_array jacks;
#endif
+ int power_save;
int depop_delay; /* depop delay in ms, -1 for default delay time */
/* fix-up list */
@@ -423,7 +422,7 @@ enum {
int snd_hda_bus_new(struct snd_card *card, const struct hda_bus_template *temp,
struct hda_bus **busp);
int snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr,
- struct hda_codec **codecp);
+ struct hda_codec **codecp, int power_save);
int snd_hda_codec_configure(struct hda_codec *codec);
int snd_hda_codec_update_widgets(struct hda_codec *codec);
@@ -588,9 +587,11 @@ const char *snd_hda_get_jack_location(u32 cfg);
* power saving
*/
#ifdef CONFIG_PM
+void snd_hda_power_save_set(struct hda_codec *codec, int value);
void snd_hda_power_save(struct hda_codec *codec, int delta, bool d3wait);
void snd_hda_update_power_acct(struct hda_codec *codec);
#else
+static inline void snd_hda_power_save_set(struct hda_codec *codec, int value) {}
static inline void snd_hda_power_save(struct hda_codec *codec, int delta,
bool d3wait) {}
#endif
@@ -634,18 +635,6 @@ static inline void snd_hda_power_down(struct hda_codec *codec)
snd_hda_power_save(codec, -1, false);
}
-/**
- * snd_hda_power_sync - Synchronize the power-save status
- * @codec: HD-audio codec
- *
- * Synchronize the actual power state with the power account;
- * called when power_save parameter is changed
- */
-static inline void snd_hda_power_sync(struct hda_codec *codec)
-{
- snd_hda_power_save(codec, 0, false);
-}
-
#ifdef CONFIG_SND_HDA_PATCH_LOADER
/*
* patch firmware
diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c
index 17c2637..4bb13ae 100644
--- a/sound/pci/hda/hda_controller.c
+++ b/sound/pci/hda/hda_controller.c
@@ -1813,7 +1813,7 @@ static int get_jackpoll_interval(struct azx *chip)
/* Codec initialization */
int azx_codec_create(struct azx *chip, const char *model,
unsigned int max_slots,
- int *power_save_to)
+ int power_save)
{
struct hda_bus_template bus_temp;
int c, codecs, err;
@@ -1827,7 +1827,6 @@ int azx_codec_create(struct azx *chip, const char *model,
bus_temp.ops.attach_pcm = azx_attach_pcm_stream;
bus_temp.ops.bus_reset = azx_bus_reset;
#ifdef CONFIG_PM
- bus_temp.power_save = power_save_to;
bus_temp.ops.pm_notify = azx_power_notify;
#endif
#ifdef CONFIG_SND_HDA_DSP_LOADER
@@ -1886,7 +1885,8 @@ int azx_codec_create(struct azx *chip, const char *model,
for (c = 0; c < max_slots; c++) {
if ((chip->codec_mask & (1 << c)) & chip->codec_probe_mask) {
struct hda_codec *codec;
- err = snd_hda_codec_new(chip->bus, c, &codec);
+ err = snd_hda_codec_new(chip->bus, c, &codec,
+ power_save);
if (err < 0)
continue;
codec->jackpoll_interval = get_jackpoll_interval(chip);
diff --git a/sound/pci/hda/hda_controller.h b/sound/pci/hda/hda_controller.h
index c90d10f..d187121 100644
--- a/sound/pci/hda/hda_controller.h
+++ b/sound/pci/hda/hda_controller.h
@@ -45,7 +45,7 @@ irqreturn_t azx_interrupt(int irq, void *dev_id);
/* Codec interface */
int azx_codec_create(struct azx *chip, const char *model,
unsigned int max_slots,
- int *power_save_to);
+ int power_save);
int azx_codec_configure(struct azx *chip);
int azx_mixer_create(struct azx *chip);
int azx_init_stream(struct azx *chip);
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index a8a1e14..d51779a 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -174,7 +174,6 @@ static struct kernel_param_ops param_ops_xint = {
#define param_check_xint param_check_int
static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT;
-static int *power_save_addr = &power_save;
module_param(power_save, xint, 0644);
MODULE_PARM_DESC(power_save, "Automatic power-saving timeout "
"(in second, 0 = disable).");
@@ -187,7 +186,7 @@ static bool power_save_controller = 1;
module_param(power_save_controller, bool, 0644);
MODULE_PARM_DESC(power_save_controller, "Reset controller in power save mode.");
#else
-static int *power_save_addr;
+static int power_save = -1;
#endif /* CONFIG_PM */
static int align_buffer_size = -1;
@@ -754,7 +753,7 @@ static int param_set_xint(const char *val, const struct kernel_param *kp)
if (!chip->bus || chip->disabled)
continue;
list_for_each_entry(c, &chip->bus->codec_list, list)
- snd_hda_power_sync(c);
+ snd_hda_power_save_set(c, power_save);
}
mutex_unlock(&card_list_lock);
return 0;
@@ -1898,7 +1897,7 @@ static int azx_probe_continue(struct azx *chip)
/* create codec instances */
err = azx_codec_create(chip, model[dev],
azx_max_codecs[chip->driver_type],
- power_save_addr);
+ power_save);
if (err < 0)
goto out_free;
diff --git a/sound/pci/hda/hda_sysfs.c b/sound/pci/hda/hda_sysfs.c
index ccc962a..69bbb0b 100644
--- a/sound/pci/hda/hda_sysfs.c
+++ b/sound/pci/hda/hda_sysfs.c
@@ -44,8 +44,37 @@ static ssize_t power_off_acct_show(struct device *dev,
return sprintf(buf, "%u\n", jiffies_to_msecs(codec->power_off_acct));
}
+static ssize_t power_save_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hda_codec *codec = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", jiffies_to_msecs(codec->power_save));
+}
+
+static ssize_t power_save_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct hda_codec *codec = dev_get_drvdata(dev);
+ unsigned long val;
+ int err = kstrtol(buf, 0, &val);
+
+ if (err < 0)
+ return err;
+
+ if (val < -1)
+ return -EINVAL;
+
+ snd_hda_power_save_set(codec, val);
+ return count;
+}
+
static DEVICE_ATTR_RO(power_on_acct);
static DEVICE_ATTR_RO(power_off_acct);
+static DEVICE_ATTR_RW(power_save);
+
#endif /* CONFIG_PM */
#define CODEC_INFO_SHOW(type) \
@@ -759,6 +788,7 @@ static struct attribute *hda_dev_attrs[] = {
#ifdef CONFIG_PM
&dev_attr_power_on_acct.attr,
&dev_attr_power_off_acct.attr,
+ &dev_attr_power_save.attr,
#endif
#ifdef CONFIG_SND_HDA_RECONFIG
&dev_attr_init_verbs.attr,
diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c
index 375e94f..69b76fc 100644
--- a/sound/pci/hda/hda_tegra.c
+++ b/sound/pci/hda/hda_tegra.c
@@ -82,7 +82,7 @@ module_param(power_save, bint, 0644);
MODULE_PARM_DESC(power_save,
"Automatic power-saving timeout (in seconds, 0 = disable).");
#else
-static int power_save = 0;
+static int power_save = -1;
#endif
/*
@@ -503,7 +503,7 @@ static int hda_tegra_probe(struct platform_device *pdev)
goto out_free;
/* create codec instances */
- err = azx_codec_create(chip, NULL, 0, &power_save);
+ err = azx_codec_create(chip, NULL, 0, power_save);
if (err < 0)
goto out_free;
--
2.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists