| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 17 Apr 2015 17:18:41 -0300
From: Marcelo Tosatti <mtosatti@...hat.com>
To: Paolo Bonzini <pbonzini@...hat.com>
Cc: Peter Zijlstra <peterz@...radead.org>,
torvalds@...ux-foundation.org, linux-kernel@...r.kernel.org,
gleb@...nel.org, kvm@...r.kernel.org,
Ralf Baechle <ralf@...ux-mips.org>, luto@...nel.org
Subject: Re: [GIT PULL] First batch of KVM changes for 4.1
On Fri, Apr 17, 2015 at 09:57:12PM +0200, Paolo Bonzini wrote:
>
>
> >> From 4eb9d7132e1990c0586f28af3103675416d38974 Mon Sep 17 00:00:00 2001
> >> From: Paolo Bonzini <pbonzini@...hat.com>
> >> Date: Fri, 17 Apr 2015 14:57:34 +0200
> >> Subject: [PATCH] sched: add CONFIG_TASK_MIGRATION_NOTIFIER
> >>
> >> The task migration notifier is only used in x86 paravirt. Make it
> >> possible to compile it out.
> >>
> >> While at it, move some code around to ensure tmn is filled from CPU
> >> registers.
> >>
> >> Signed-off-by: Paolo Bonzini <pbonzini@...hat.com>
> >> ---
> >> arch/x86/Kconfig | 1 +
> >> init/Kconfig | 3 +++
> >> kernel/sched/core.c | 9 ++++++++-
> >> 3 files changed, 12 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> >> index d43e7e1c784b..9af252c8698d 100644
> >> --- a/arch/x86/Kconfig
> >> +++ b/arch/x86/Kconfig
> >> @@ -649,6 +649,7 @@ if HYPERVISOR_GUEST
> >>
> >> config PARAVIRT
> >> bool "Enable paravirtualization code"
> >> + select TASK_MIGRATION_NOTIFIER
> >> ---help---
> >> This changes the kernel so it can modify itself when it is run
> >> under a hypervisor, potentially improving performance significantly
> >> diff --git a/init/Kconfig b/init/Kconfig
> >> index 3b9df1aa35db..891917123338 100644
> >> --- a/init/Kconfig
> >> +++ b/init/Kconfig
> >> @@ -2016,6 +2016,9 @@ source "block/Kconfig"
> >> config PREEMPT_NOTIFIERS
> >> bool
> >>
> >> +config TASK_MIGRATION_NOTIFIER
> >> + bool
> >> +
> >> config PADATA
> >> depends on SMP
> >> bool
> >> diff --git a/kernel/sched/core.c b/kernel/sched/core.c
> >> index f9123a82cbb6..c07a53aa543c 100644
> >> --- a/kernel/sched/core.c
> >> +++ b/kernel/sched/core.c
> >> @@ -1016,12 +1016,14 @@ void check_preempt_curr(struct rq *rq, struct task_struct *p, int flags)
> >> rq_clock_skip_update(rq, true);
> >> }
> >>
> >> +#ifdef CONFIG_TASK_MIGRATION_NOTIFIER
> >> static ATOMIC_NOTIFIER_HEAD(task_migration_notifier);
> >>
> >> void register_task_migration_notifier(struct notifier_block *n)
> >> {
> >> atomic_notifier_chain_register(&task_migration_notifier, n);
> >> }
> >> +#endif
> >>
> >> #ifdef CONFIG_SMP
> >> void set_task_cpu(struct task_struct *p, unsigned int new_cpu)
> >> @@ -1053,18 +1055,23 @@ void set_task_cpu(struct task_struct *p, unsigned int new_cpu)
> >> trace_sched_migrate_task(p, new_cpu);
> >>
> >> if (task_cpu(p) != new_cpu) {
> >> +#ifdef CONFIG_TASK_MIGRATION_NOTIFIER
> >> struct task_migration_notifier tmn;
> >> + int from_cpu = task_cpu(p);
> >> +#endif
> >>
> >> if (p->sched_class->migrate_task_rq)
> >> p->sched_class->migrate_task_rq(p, new_cpu);
> >> p->se.nr_migrations++;
> >> perf_sw_event_sched(PERF_COUNT_SW_CPU_MIGRATIONS, 1, 0);
> >>
> >> +#ifdef CONFIG_TASK_MIGRATION_NOTIFIER
> >> tmn.task = p;
> >> - tmn.from_cpu = task_cpu(p);
> >> + tmn.from_cpu = from_cpu;
> >> tmn.to_cpu = new_cpu;
> >>
> >> atomic_notifier_call_chain(&task_migration_notifier, 0, &tmn);
> >> +#endif
> >> }
> >>
> >> __set_task_cpu(p, new_cpu);
> >> --
> >> 2.3.5
> >
> > Paolo,
> >
> > Please revert the patch -- can fix properly in the host
> > which also conforms the KVM guest/host documented protocol.
> >
> > Radim submitted a patch to kvm@ to split
> > the kvm_write_guest in two with a barrier in between, i think.
> >
> > I'll review that patch.
>
> You're thinking of
> http://article.gmane.org/gmane.linux.kernel.stable/129187, but see
> Andy's reply:
>
> >
> > I think there are at least two ways that would work:
> >
> > a) If KVM incremented version as advertised:
> >
> > cpu = getcpu();
> > pvti = pvti for cpu;
> >
> > ver1 = pvti->version;
> > check stable bit;
> > rdtsc_barrier, rdtsc, read scale, shift, etc.
> > if (getcpu() != cpu) retry;
> > if (pvti->version != ver1) retry;
> >
> > I think this is safe because, we're guaranteed that there was an
> > interval (between the two version reads) in which the vcpu we think
> > we're on was running and the kvmclock data was valid and marked
> > stable, and we know that the tsc we read came from that interval.
> >
> > Note: rdtscp isn't needed. If we're stable, is makes no difference
> > which cpu's tsc we actually read.
> >
> > b) If version remains buggy but we use this migrations_from hack:
> >
> > cpu = getcpu();
> > pvti = pvti for cpu;
> > m1 = pvti->migrations_from;
> > barrier();
> >
> > ver1 = pvti->version;
> > check stable bit;
> > rdtsc_barrier, rdtsc, read scale, shift, etc.
> > if (getcpu() != cpu) retry;
> > if (pvti->version != ver1) retry; /* probably not really needed */
> >
> > barrier();
> > if (pvti->migrations_from != m1) retry;
> >
> > This is just like (a), except that we're using a guest kernel hack to
> > ensure that no one migrated off the vcpu during the version-protected
> > critical section and that we were, in fact, on that vcpu at some point
> > during that critical section. Once we've ensured that we were on
> > pvti's associated vcpu for the entire time we were reading it, then we
> > are protected by the existing versioning in the host.
>
> (a) is not going to happen until 4.2, and there are too many buggy hosts
> around so we'd have to define new ABI that lets the guest distinguish a
> buggy host from a fixed one.
>
> (b) works now, is not invasive, and I still maintain that the cost is
> negligible. I'm going to run for a while with CONFIG_SCHEDSTATS to see
> how often you have a migration.
>
> Anyhow if the task migration notifier is reverted we have to disable the
> whole vsyscall support altogether.
The bug which this is fixing is very rare, have no memory of a report.
In fact, its even difficult to create a synthetic reproducer. You need:
1) update of kvmclock data structure (happens once every 5 minutes).
2) migration of task from vcpu1 to vcpu2 back to vcpu1.
3) a data race between kvm_write_guest (string copy) and
2 above.
At the same time.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists