| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 25 Apr 2015 16:25:31 +0900
From: Krzysztof Kozłowski <k.kozlowski.k@...il.com>
To: Anda-Maria Nicolae <anda-maria.nicolae@...el.com>
Cc: sre@...nel.org, dbaryshkov@...il.com, robh+dt@...nel.org,
pawel.moll@....com, mark.rutland@....com,
ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
dwmw2@...radead.org, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH] power_supply: Add support for Richtek rt9455 battery charger
2015-04-24 16:57 GMT+09:00 Anda-Maria Nicolae <anda-maria.nicolae@...el.com>:
> Based on the datasheet found here:
> http://www.richtek.com/download_ds.jsp?p=RT9455
Hi,
Some comments below.
> Signed-off-by: Anda-Maria Nicolae <anda-maria.nicolae@...el.com>
> ---
> .../devicetree/bindings/power/rt9455_charger.txt | 38 +
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> drivers/power/Kconfig | 6 +
> drivers/power/Makefile | 1 +
> drivers/power/rt9455_charger.c | 1770 ++++++++++++++++++++
> 5 files changed, 1816 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/rt9455_charger.txt
> create mode 100644 drivers/power/rt9455_charger.c
>
> diff --git a/Documentation/devicetree/bindings/power/rt9455_charger.txt b/Documentation/devicetree/bindings/power/rt9455_charger.txt
> new file mode 100644
> index 0000000..f716cf6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/rt9455_charger.txt
> @@ -0,0 +1,38 @@
> +Binding for RT rt9455 battery charger
> +
> +Required properties:
> +- compatible: Should contain one of the following:
> + * "rt,rt9455"
> +
> +- reg: integer, i2c address of the device.
> +- rt,ICHRG: integer, output charge current in uA.
> +- rt,IEOC_PERCENTAGE: integer, the percent of the output charge current (ICHRG).
> + When the current in constant-voltage phase drops below
> + ICHRG x IEOC_PERCENTAGE, charge is terminated.
> +- rt,VOREG: integer, battery regulation voltage in uV.
> +
> +Optional properties:
> +- rt,VMIVR: integer, minimum input voltage regulation in uV.
> + Prevents input voltage drop due to insufficient current
> + provided by the power source.
> +- rt,IAICR: integer, input current regulation in uA.
These should be lowercase separated with dash '-'.
> +
> +Example:
> +
> +rt9455@22 {
> + compatible = "rt,rt9455";
> + reg = <0x22>;
> +
> + interrupt-parent = <&gpio1>;
> + interrupts = <0 1>;
> +
> + interrupt-gpio = <&gpio1 0 1>;
> + reset-gpio = <&gpio1 1 1>;
> +
> + rt,ICHRG = <500000>;
> + rt,IEOC_PERCENTAGE = <10>;
> + rt,VOREG = <4200000>;
> +
> + rt,VMIVR = <4500000>;
> + rt,IAICR = <500000>;
> +};
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index 389ca13..dc868ed 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -148,6 +148,7 @@ raidsonic RaidSonic Technology GmbH
> ralink Mediatek/Ralink Technology Corp.
> ramtron Ramtron International
> realtek Realtek Semiconductor Corp.
> +rt Richtek Technology Corporation
Actually I would prefer sticking to "richtek" prefix, sent some time
ago by Beomho Seo:
http://lwn.net/Articles/625133/
"rt" could be easily taken as "Realtek".
(...)
> +/*
> + * Each array initialised below shows the possible real-world values for a
> + * group of bits belonging to RT9455 registers. The arrays are sorted in
> + * ascending order. The index of each real-world value represents the value
> + * that is encoded in the group of bits belonging to RT9455 registers.
> + */
> +/* REG06[6:4] (ICHRG) in uAh */
> +static const int rt9455_ichrg_values[] = {
> + 500000, 650000, 800000, 950000, 1100000, 1250000, 1400000, 1550000
> +};
> +
> +/* REG02[7:2] (VOREG) in uV */
> +static const int rt9455_voreg_values[] = {
> + 3500000, 3520000, 3540000, 3560000, 3580000, 3600000, 3620000, 3640000,
> + 3660000, 3680000, 3700000, 3720000, 3740000, 3760000, 3780000, 3800000,
> + 3820000, 3840000, 3860000, 3880000, 3900000, 3920000, 3940000, 3960000,
> + 3980000, 4000000, 4020000, 4040000, 4060000, 4080000, 4100000, 4120000,
> + 4140000, 4160000, 4180000, 4200000, 4220000, 4240000, 4260000, 4280000,
> + 4300000, 4330000, 4350000, 4370000, 4390000, 4410000, 4430000, 4450000,
> + 4450000, 4450000, 4450000, 4450000, 4450000, 4450000, 4450000, 4450000,
> + 4450000, 4450000, 4450000, 4450000, 4450000, 4450000, 4450000, 4450000
> +};
> +
> +/* REG07[3:0] (VMREG) in uV */
> +static const int rt9455_vmreg_values[] = {
> + 4200000, 4220000, 4240000, 4260000, 4280000, 4300000, 4320000, 4340000,
> + 4360000, 4380000, 4400000, 4430000, 4450000, 4450000, 4450000, 4450000
> +};
> +
> +/* REG05[5:4] (IEOC_PERCENTAGE) */
> +static const int rt9455_ieoc_percentage_values[] = {
> + 10, 30, 20, 30
> +};
> +
> +/* REG05[1:0] (VMIVR) in uV */
> +static const int rt9455_vmivr_values[] = {
> + 4000000, 4250000, 4500000, 5000000
> +};
> +
> +/* REG05[1:0] (IAICR) in uA */
> +static const int rt9455_iaicr_values[] = {
> + 100000, 500000, 1000000, 2000000
> +};
> +
> +struct rt9455_info {
> + struct i2c_client *client;
> + struct power_supply *charger;
> +#if IS_ENABLED(CONFIG_USB_PHY)
> + struct usb_phy *usb_phy;
> + struct notifier_block nb;
> +#endif
> + struct gpio_desc *gpiod_irq;
> + unsigned int gpio_irq;
> + struct delayed_work pwr_rdy_work;
> + struct delayed_work max_charging_time_work;
> + struct delayed_work batt_presence_work;
> +};
> +
> +/* I2C read/write API */
> +static int rt9455_read(struct rt9455_info *info, u8 reg, u8 *data)
> +{
> + int ret;
> +
> + ret = i2c_smbus_read_byte_data(info->client, reg);
> + if (ret < 0)
> + return ret;
> +
> + *data = ret;
> + return 0;
> +}
> +
> +static int rt9455_write(struct rt9455_info *info, u8 reg, u8 data)
> +{
> + return i2c_smbus_write_byte_data(info->client, reg, data);
> +}
> +
> +static int rt9455_read_mask(struct rt9455_info *info, u8 reg,
> + u8 mask, u8 shift, u8 *data)
> +{
> + u8 v;
> + int ret;
> +
> + ret = rt9455_read(info, reg, &v);
> + if (ret < 0)
> + return ret;
> +
> + v &= mask;
> + v >>= shift;
> + *data = v;
> +
> + return 0;
> +}
> +
> +static int rt9455_write_mask(struct rt9455_info *info, u8 reg,
> + u8 mask, u8 shift, u8 data)
> +{
> + u8 v;
> + int ret;
> +
> + ret = rt9455_read(info, reg, &v);
> + if (ret < 0)
> + return ret;
> +
> + v &= ~mask;
> + v |= ((data << shift) & mask);
> +
> + return rt9455_write(info, reg, v);
> +}
Maybe just regmap_read(), regmap_write() and regmap_update_bits().
> +
> +/*
> + * Iterate through each element of the 'tbl' array until an element whose value
> + * is greater than v is found. Return the index of the respective element,
> + * or the index of the last element in the array, if no such element is found.
> + */
> +static u8 rt9455_find_idx(const int tbl[], int tbl_size, int v)
> +{
> + int i;
> +
> + /* No need to iterate until the last index in the table because
> + * if no element greater than v is found in the table,
> + * or if only the last element is greater than v,
> + * function returns the index of the last element.
> + */
Here and in other places - please use standard kernel multi-line comment:
/*
* lorem
* ipsum
*/
(...)
> +
> +static void rt9455_batt_presence_work_callback(struct work_struct *work)
> +{
> + struct rt9455_info *info = container_of(work, struct rt9455_info,
> + batt_presence_work.work);
> + struct device *dev = &info->client->dev;
> + u8 irq1;
> + int ret;
> +
> + ret = rt9455_read(info, RT9455_REG_IRQ1, &irq1);
> + if (ret) {
> + dev_err(dev, "Failed to read IRQ1 register\n");
> + return;
> + }
> +
> + /* If the battery is still absent, batt_presence_work is rescheduled.
> + Otherwise, max_charging_time is scheduled.
> + */
> + if (irq1 & RT9455_REG_IRQ1_BATAB_MASK) {
> + schedule_delayed_work(&info->batt_presence_work,
> + RT9455_BATT_PRESENCE_DELAY * HZ);
> + } else {
> + schedule_delayed_work(&info->max_charging_time_work,
> + RT9455_MAX_CHARGING_TIME * HZ);
> + }
Do all of these schedules have to be executed on system_wq? Maybe
power efficient workqueue could be used? I don't see any locking so
probably not... but still it is worth investigating.
> +}
> +
> +struct power_supply_desc rt9455_charger_desc = {
> + .name = RT9455_DRIVER_NAME,
> + .type = POWER_SUPPLY_TYPE_USB,
> + .properties = rt9455_charger_properties,
> + .num_properties = ARRAY_SIZE(rt9455_charger_properties),
> + .get_property = rt9455_charger_get_property,
> + .set_property = rt9455_charger_set_property,
> + .property_is_writeable = rt9455_charger_property_is_writeable,
> +};
This can be "static const".
> +
> +static int rt9455_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
> + struct device *dev = &client->dev;
> + struct rt9455_info *info;
> + struct power_supply_config rt9455_charger_config = {};
> + /* mandatory device-specific data values */
> + u32 ichrg, ieoc_percentage, voreg;
> + /* optional device-specific data values */
> + u32 vmivr = -1, iaicr = -1;
> + int ret;
> +
> + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
> + dev_err(dev, "No support for SMBUS_BYTE_DATA\n");
> + return -ENODEV;
> + }
> + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
> + if (!info)
> + return -ENOMEM;
> +
> + info->client = client;
> + i2c_set_clientdata(client, info);
> +
> + ret = rt9455_discover_charger(info, &ichrg, &ieoc_percentage,
> + &voreg, &vmivr, &iaicr);
> + if (ret) {
> + dev_err(dev, "Failed to discover charger\n");
> + return ret;
> + }
> +
> +#if IS_ENABLED(CONFIG_USB_PHY)
> + info->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2);
> + if (IS_ERR_OR_NULL(info->usb_phy)) {
> + dev_err(dev, "Failed to get USB transceiver\n");
> + } else {
> + info->nb.notifier_call = rt9455_usb_event;
> + ret = usb_register_notifier(info->usb_phy, &info->nb);
> + if (ret) {
> + dev_err(dev, "Failed to register USB notifier\n");
> + usb_put_phy(info->usb_phy);
> + }
> + }
> +#endif
> +
> + INIT_DELAYED_WORK(&info->pwr_rdy_work, rt9455_pwr_rdy_work_callback);
> + INIT_DELAYED_WORK(&info->max_charging_time_work,
> + rt9455_max_charging_time_work_callback);
> + INIT_DELAYED_WORK(&info->batt_presence_work,
> + rt9455_batt_presence_work_callback);
Maybe any of these could be made as DEFERRABLE_WORK? Just thinking out loud...
> +
> + rt9455_charger_config.of_node = dev->of_node;
> + rt9455_charger_config.drv_data = info;
> + rt9455_charger_config.supplied_to = rt9455_charger_supplied_to;
> + rt9455_charger_config.num_supplicants =
> + ARRAY_SIZE(rt9455_charger_supplied_to);
> + ret = devm_request_threaded_irq(dev, client->irq, NULL,
> + rt9455_irq_handler_thread,
> + IRQF_TRIGGER_LOW | IRQF_ONESHOT,
> + RT9455_DRIVER_NAME, info);
> + if (ret < 0) {
> + dev_err(dev, "Failed to register IRQ handler\n");
> + return ret;
goto put_usb_phy;
> + }
> +
> + ret = rt9455_hw_init(info, ichrg, ieoc_percentage, voreg, vmivr, iaicr);
> + if (ret) {
> + dev_err(dev, "Failed to set charger to its default values\n");
> + return ret;
Ditto.
> + }
> +
> + info->charger = power_supply_register(dev, &rt9455_charger_desc,
> + &rt9455_charger_config);
> + if (IS_ERR_OR_NULL(info->charger)) {
I think here it cannot be NULL. IS_ERR() is sufficient.
> + dev_err(dev, "Failed to register charger\n");
> + ret = PTR_ERR(info->charger);
> + goto put_usb_phy;
> + }
> +
> + return 0;
> +
> +put_usb_phy:
> +#if IS_ENABLED(CONFIG_USB_PHY)
> + if (!IS_ERR_OR_NULL(info->usb_phy)) {
> + usb_unregister_notifier(info->usb_phy, &info->nb);
> + usb_put_phy(info->usb_phy);
> + }
> +#endif
> + return ret;
> +}
> +
> +static int rt9455_remove(struct i2c_client *client)
> +{
> + int ret;
> + struct rt9455_info *info = i2c_get_clientdata(client);
> +
> + ret = rt9455_register_reset(info);
> + if (ret)
> + dev_err(&info->client->dev, "Failed to set charger to its default values\n");
> +
> +#if IS_ENABLED(CONFIG_USB_PHY)
> + if (!IS_ERR_OR_NULL(info->usb_phy)) {
> + usb_unregister_notifier(info->usb_phy, &info->nb);
> + usb_put_phy(info->usb_phy);
> + }
> +#endif
> +
> + cancel_delayed_work_sync(&info->pwr_rdy_work);
> + cancel_delayed_work_sync(&info->max_charging_time_work);
> + cancel_delayed_work_sync(&info->batt_presence_work);
> +
> + power_supply_unregister(info->charger);
> +
> + return ret;
> +}
> +
> +static const struct i2c_device_id rt9455_i2c_id_table[] = {
> + { RT9455_DRIVER_NAME, 0 },
> + { },
> +};
> +MODULE_DEVICE_TABLE(i2c, rt9455_i2c_id_table);
> +
> +static const struct of_device_id rt9455_of_match[] = {
> + { .compatible = "rt,rt9455", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, rt9455_of_match);
> +
> +static const struct acpi_device_id rt9455_i2c_acpi_match[] = {
> + {"RTK9455", 0},
To be consistent: spaces after/before brackets.
> + {}
> +};
> +MODULE_DEVICE_TABLE(acpi, rt9455_i2c_acpi_match);
> +
> +static struct i2c_driver rt9455_driver = {
> + .probe = rt9455_probe,
> + .remove = rt9455_remove,
> + .id_table = rt9455_i2c_id_table,
> + .driver = {
> + .name = RT9455_DRIVER_NAME,
> + .owner = THIS_MODULE,
Owner is now set by core and such initialization was removed from drivers.
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists