linux-kernel - [PATCH 3.2 087/221] xhci: Workaround for PME stuck issues in Intel xhci

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Tue, 05 May 2015 02:16:39 +0100
From:	Ben Hutchings <ben@...adent.org.uk>
To:	linux-kernel@...r.kernel.org, stable@...r.kernel.org
CC:	akpm@...ux-foundation.org,
	"Greg Kroah-Hartman" <gregkh@...uxfoundation.org>,
	"Mathias Nyman" <mathias.nyman@...ux.intel.com>
Subject: [PATCH 3.2 087/221] xhci: Workaround for PME stuck issues in
 Intel xhci

3.2.69-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Nyman <mathias.nyman@...ux.intel.com>

commit b8cb91e058cd0c0f02059c1207293c5b31d350fa upstream.

The xhci in Intel Sunrisepoint and Cherryview platforms need a driver
workaround for a Stuck PME that might either block PME events in suspend,
or create spurious PME events preventing runtime suspend.

Workaround is to clear a internal PME flag, BIT(28) in a vendor specific
PMCTRL register at offset 0x80a4, in both suspend resume callbacks

Without this, xhci connected usb devices might never be able to wake up the
system from suspend, or prevent device from going to suspend (xhci d3)

Signed-off-by: Mathias Nyman <mathias.nyman@...ux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@...adent.org.uk>
---
 drivers/usb/host/xhci-pci.c | 30 ++++++++++++++++++++++++++++++
 drivers/usb/host/xhci.h     |  1 +
 2 files changed, 31 insertions(+)

--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -36,6 +36,9 @@
 
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI	0x8c31
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI	0x9c31
+#define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI		0x22b5
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI		0xa12f
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI	0x9d2f
 
 static const char hcd_name[] = "xhci_hcd";
 
@@ -118,6 +121,12 @@ static void xhci_pci_quirks(struct devic
 		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
 		xhci->quirks |= XHCI_AVOID_BEI;
 	}
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+		(pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)) {
+		xhci->quirks |= XHCI_PME_STUCK_QUIRK;
+	}
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
@@ -128,6 +137,21 @@ static void xhci_pci_quirks(struct devic
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
 }
 
+/*
+ * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
+ * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
+ */
+static void xhci_pme_quirk(struct xhci_hcd *xhci)
+{
+	u32 val;
+	void __iomem *reg;
+
+	reg = (void __iomem *) xhci->cap_regs + 0x80a4;
+	val = readl(reg);
+	writel(val | BIT(28), reg);
+	readl(reg);
+}
+
 /* called during probe() after chip reset completes */
 static int xhci_pci_setup(struct usb_hcd *hcd)
 {
@@ -235,6 +259,9 @@ static int xhci_pci_suspend(struct usb_h
 			xhci->shared_hcd->state != HC_STATE_SUSPENDED)
 		return -EINVAL;
 
+	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+		xhci_pme_quirk(xhci);
+
 	retval = xhci_suspend(xhci, do_wakeup);
 
 	return retval;
@@ -265,6 +292,9 @@ static int xhci_pci_resume(struct usb_hc
 	if (usb_is_intel_switchable_xhci(pdev))
 		usb_enable_xhci_ports(pdev);
 
+	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+		xhci_pme_quirk(xhci);
+
 	retval = xhci_resume(xhci, hibernated);
 	return retval;
 }
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1497,6 +1497,7 @@ struct xhci_hcd {
 #define XHCI_AVOID_BEI		(1 << 15)
 #define XHCI_SLOW_SUSPEND	(1 << 17)
 #define XHCI_SPURIOUS_WAKEUP	(1 << 18)
+#define XHCI_PME_STUCK_QUIRK	(1 << 20)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/