linux-kernel - [PATCH 2/4] ARM: multi_v7_defconfig: Enable PMIC and MUIC drivers for Exynos boards

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Sun, 17 May 2015 17:09:46 +0900
From:	Krzysztof Kozlowski <k.kozlowski.k@...il.com>
To:	Kukjin Kim <kgene@...nel.org>, devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:	Krzysztof Kozlowski <k.kozlowski@...sung.com>
Subject: [PATCH 2/4] ARM: multi_v7_defconfig: Enable PMIC and MUIC drivers for Exynos boards

From: Krzysztof Kozlowski <k.kozlowski@...sung.com>

Enable drivers for PMICs and MUICs present on Exynos-based devices:
 - max14577: charger, fuel gauge (max17040), regulator,
   used on: Gear 1, Gear 2,
 - max7693: charger, fuel gauge (max17042),
   used on: Trats2,
 - s5m/s2mps: RTC, clock,
   used on: Arndale, Arndale Octa, Gear 1, Gear 2

This allows full usage of charging stack on these devices along with RTC
and 32 kHz clocks.

The I2C_GPIO is necessary for MAX77693 on Trats2 because the device is
wired to Exynos4412 over GPIO.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
---
 arch/arm/configs/multi_v7_defconfig | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index d524d2e9633c..6a6a292c5bf8 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -280,6 +280,7 @@ CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_I2C_DIGICOLOR=m
 CONFIG_I2C_GPIO=m
 CONFIG_I2C_EXYNOS5=y
+CONFIG_I2C_GPIO=y
 CONFIG_I2C_MV64XXX=y
 CONFIG_I2C_RIIC=y
 CONFIG_I2C_S3C2410=y
@@ -328,7 +329,11 @@ CONFIG_GPIO_SYSCON=y
 CONFIG_GPIO_TPS6586X=y
 CONFIG_GPIO_TPS65910=y
 CONFIG_BATTERY_SBS=y
+CONFIG_BATTERY_MAX17040=y
+CONFIG_BATTERY_MAX17042=y
+CONFIG_CHARGER_MAX14577=y
 CONFIG_CHARGER_TPS65090=y
+CONFIG_CHARGER_MAX77693=y
 CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_GPIO_RESTART=y
@@ -357,8 +362,10 @@ CONFIG_MFD_AXP20X=y
 CONFIG_MFD_CROS_EC=y
 CONFIG_MFD_CROS_EC_I2C=m
 CONFIG_MFD_CROS_EC_SPI=y
+CONFIG_MFD_MAX14577=y
 CONFIG_MFD_MAX77686=y
 CONFIG_MFD_MAX8907=y
+CONFIG_MFD_MAX77693=y
 CONFIG_MFD_SEC_CORE=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_PALMAS=y
@@ -374,9 +381,11 @@ CONFIG_REGULATOR_DA9210=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_MFD_SYSCON=y
 CONFIG_POWER_RESET_SYSCON=y
+CONFIG_REGULATOR_MAX14577=y
 CONFIG_REGULATOR_MAX8907=y
 CONFIG_REGULATOR_MAX8973=y
 CONFIG_REGULATOR_MAX77686=y
+CONFIG_REGULATOR_MAX77693=y
 CONFIG_REGULATOR_MAX77802=m
 CONFIG_REGULATOR_PALMAS=y
 CONFIG_REGULATOR_S2MPS11=y
@@ -529,6 +538,7 @@ CONFIG_RTC_DRV_SUN6I=y
 CONFIG_RTC_DRV_SUNXI=y
 CONFIG_RTC_DRV_MV=y
 CONFIG_RTC_DRV_TEGRA=y
+CONFIG_RTC_DRV_S5M=y
 CONFIG_DMADEVICES=y
 CONFIG_DW_DMAC=y
 CONFIG_MV_XOR=y
@@ -558,6 +568,7 @@ CONFIG_QCOM_GSBI=y
 CONFIG_COMMON_CLK_QCOM=y
 CONFIG_COMMON_CLK_MAX77686=y
 CONFIG_COMMON_CLK_MAX77802=m
+CONFIG_COMMON_CLK_S2MPS11=y
 CONFIG_APQ_MMCC_8084=y
 CONFIG_MSM_GCC_8660=y
 CONFIG_MSM_MMCC_8960=y
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/