lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Sun, 17 May 2015 17:26:14 +0900 From: Krzysztof Kozlowski <k.kozlowski.k@...il.com> To: Kukjin Kim <kgene@...nel.org>, devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org Cc: Krzysztof Kozlowski <k.kozlowski.k@...il.com> Subject: [PATCH v4 7/8] ARM: dts: Use labels for overriding nodes in exynos5440 boards Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@...il.com> --- arch/arm/boot/dts/exynos5440-sd5v1.dts | 10 ++-- arch/arm/boot/dts/exynos5440-ssdk5440.dts | 85 +++++++++++++++---------------- 2 files changed, 47 insertions(+), 48 deletions(-) diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts index 268609a42b2c..a98501bab6fc 100644 --- a/arch/arm/boot/dts/exynos5440-sd5v1.dts +++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts @@ -27,13 +27,13 @@ }; }; - gmac: ethernet@...30000 { - fixed_phy; - phy_addr = <1>; - }; - spi { status = "disabled"; }; }; + +&gmac { + fixed_phy; + phy_addr = <1>; +}; diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index ff55dac6e219..e4443f4e6572 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -20,59 +20,58 @@ bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@...0000000 mem=6144M@...00000000 console=ttySAC0,115200"; }; - spi_0: spi@...00 { - - flash: w25q128@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "winbond,w25q128"; - spi-max-frequency = <15625000>; - reg = <0>; - controller-data { - samsung,spi-feedback-delay = <0>; - }; + fixed-rate-clocks { + xtal { + compatible = "samsung,clock-xtal"; + clock-frequency = <50000000>; + }; + }; +}; - partition@...00 { - label = "BootLoader"; - reg = <0x60000 0x80000>; - read-only; - }; +&pcie_0 { + reset-gpio = <&pin_ctrl 5 0>; + status = "okay"; +}; - partition@...00 { - label = "Recovery-Kernel"; - reg = <0xe0000 0x300000>; - read-only; - }; +&pcie_1 { + reset-gpio = <&pin_ctrl 22 0>; + status = "okay"; +}; - partition@...000 { - label = "CRAM-FS"; - reg = <0x3e0000 0x700000>; - read-only; - }; +&spi_0 { + flash: w25q128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q128"; + spi-max-frequency = <15625000>; + reg = <0>; + controller-data { + samsung,spi-feedback-delay = <0>; + }; - partition@...000 { - label = "User-Data"; - reg = <0xae0000 0x520000>; - }; + partition@...00 { + label = "BootLoader"; + reg = <0x60000 0x80000>; + read-only; + }; + partition@...00 { + label = "Recovery-Kernel"; + reg = <0xe0000 0x300000>; + read-only; }; - }; + partition@...000 { + label = "CRAM-FS"; + reg = <0x3e0000 0x700000>; + read-only; + }; - fixed-rate-clocks { - xtal { - compatible = "samsung,clock-xtal"; - clock-frequency = <50000000>; + partition@...000 { + label = "User-Data"; + reg = <0xae0000 0x520000>; }; - }; - pcie@...000 { - reset-gpio = <&pin_ctrl 5 0>; - status = "okay"; }; - pcie@...000 { - reset-gpio = <&pin_ctrl 22 0>; - status = "okay"; - }; }; -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists