| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 25 May 2015 10:33:46 -0700 From: Ray Jui <rjui@...adcom.com> To: Mike Turquette <mturquette@...aro.org>, Stephen Boyd <sboyd@...eaurora.org>, Alex Elder <elder@...aro.org>, Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>, Mark Rutland <mark.rutland@....com>, Ian Campbell <ijc+devicetree@...lion.org.uk>, Russell King <linux@....linux.org.uk>, Arnd Bergmann <arnd@...db.de> CC: <linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>, Scott Branden <sbranden@...adcom.com>, Dmitry Torokhov <dtor@...gle.com>, Anatol Pomazau <anatol@...gle.com>, <linux-kernel@...r.kernel.org>, <bcm-kernel-feedback-list@...adcom.com> Subject: Re: [PATCH v7 0/6] Add common clock support for Broadcom iProc architecture Hi Mike/Stephen, Ping. Do you think you will be able to review this patch set some time in the near future? Thanks! Ray On 5/11/2015 2:23 PM, Ray Jui wrote: > Hi Mike, > > Have you had a chance to review the iProc clock patches? If possible, > I'd like to get feedback from you as early as possible so I can make > changes if required. It would be really nice if we can get the iProc > clock patches going into v4.2. > > A lot of our iProc drivers depend on these clock patches. > > Thanks, > > Ray > > On 5/5/2015 11:13 AM, Ray Jui wrote: >> This patchset contains the initial common clock support for Broadcom's iProc >> family of SoCs. The iProc clock architecture comprises of various PLLs, e.g., >> ARMPLL, GENPLL, LCPLL0, MIPIPLL, and etc. An onboard crystal serves as the >> basic reference clock for these PLLs. Each PLL may have several leaf clocks. >> One special group of clocks is the ASIU clocks, which are dervied directly >> from the crystal reference clock. >> >> This patchset also contains the basic clock support for the Broadcom Cygnus >> SoC, which implements the iProc clock architecture >> >> Changes from v6: >> - Rebase to v4.1-rc2 >> - Consolidate iProc PLL and its leaf clocks into a single device node, based >> on feedback from Mike Turquette. The PLL and its leaf clocks are now exposed >> a clock consumer through indices of the same device node phandle >> - Update iProc device tree binding document based on the above change >> - Add SW override support to iProc PLL clocks >> >> Changes from v5: >> - Rebase to v4.0-rc4 >> - Drop of_clk_get_parent_rate helper function from the clock framework >> - Get rid of custom "clock-frequency" support in iProc PLL code. Instead, add >> standard clock set_rate and round_rate support and make use of DT properties >> "assigned-clocks" and "assigned-clock-rates" to initialize PLL to the >> desired rate when registering to the clock framework >> - Add SW workaround for ASIC bug on MIPI PLL to always read back the same >> register following a write transaction, to ensure value is written to the >> correct register >> >> Changes from v4: >> - Add of_clk_get_parent_rate helper function into the clock framework >> - Switch to use of_clk_get_parent_rate in the iProc PLL clock driver >> >> Changes from v3: >> - Fix incorrect use of passing in of_clk_src_onecell_get when adding ARM PLL >> and other iProc PLLs as clock provider. These PLLs have zero cells in DT and >> thefore of_clk_src_simple_get should be used instead >> - Rename Cygnus MIPI PLL Channel 2 clock from BCM_CYGNUS_MIPIPLL_CH2_UNUSED >> to BCM_CYGNUS_MIPIPLL_CH2_V3D, since a 3D graphic rendering engine has been >> integrated into Cygnus revision B0 and has its core clock running off >> MIPI PLL Channel 2 >> - Changed default MIPI PLL VCO frequency from 1.75 GHz to 2.1 GHz. This allows >> us to derive 300 MHz V3D clock from channel 2 through the post divisor >> >> Changes from v2: >> - Re-arrange Cygnus clock/pll init functions so each init function is right >> next to its clock table >> - Removed #defines for number of clocks in Cygnus. Have the number of clocks >> automatically determined based on array size of the clock table >> >> Changes from v1: >> - Separate drivers/clk/Makefile change for drivers/clk/bcm out to a standalone patch >> >> Ray Jui (6): >> clk: iproc: define Broadcom iProc clock binding >> clk: iproc: add initial common clock support >> clk: Change bcm clocks build dependency >> clk: cygnus: add clock support for Broadcom Cygnus >> ARM: dts: enable clock support for Broadcom Cygnus >> clk: cygnus: remove Cygnus dummy clock binding >> >> .../devicetree/bindings/clock/bcm-cygnus-clock.txt | 34 - >> .../bindings/clock/brcm,iproc-clocks.txt | 132 ++++ >> arch/arm/boot/dts/bcm-cygnus-clock.dtsi | 89 ++- >> drivers/clk/Makefile | 2 +- >> drivers/clk/bcm/Kconfig | 9 + >> drivers/clk/bcm/Makefile | 2 + >> drivers/clk/bcm/clk-cygnus.c | 265 ++++++++ >> drivers/clk/bcm/clk-iproc-armpll.c | 282 ++++++++ >> drivers/clk/bcm/clk-iproc-asiu.c | 276 ++++++++ >> drivers/clk/bcm/clk-iproc-pll.c | 716 ++++++++++++++++++++ >> drivers/clk/bcm/clk-iproc.h | 178 +++++ >> include/dt-bindings/clock/bcm-cygnus.h | 68 ++ >> 12 files changed, 1990 insertions(+), 63 deletions(-) >> delete mode 100644 Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt >> create mode 100644 Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt >> create mode 100644 drivers/clk/bcm/clk-cygnus.c >> create mode 100644 drivers/clk/bcm/clk-iproc-armpll.c >> create mode 100644 drivers/clk/bcm/clk-iproc-asiu.c >> create mode 100644 drivers/clk/bcm/clk-iproc-pll.c >> create mode 100644 drivers/clk/bcm/clk-iproc.h >> create mode 100644 include/dt-bindings/clock/bcm-cygnus.h >> -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists