linux-kernel - Re: [PATCH v2] ARM: berlin: add SPI nodes for BG2Q

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Wed, 27 May 2015 10:03:01 +0200
From:	Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
To:	Antoine Tenart <antoine.tenart@...e-electrons.com>
CC:	zmxu@...vell.com, jszhang@...vell.com,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] ARM: berlin: add SPI nodes for BG2Q

On 27.05.2015 09:59, Antoine Tenart wrote:
> The BG2Q SoC has two SPI controllers. Add the corresponding nodes.
>
> Signed-off-by: Antoine Tenart <antoine.tenart@...e-electrons.com>
> ---
>
> Changes since v1:
> 	- reworked the pinmux
> 	- removed useless interrupt-parent properties
> 	- typo
>
>   arch/arm/boot/dts/berlin2q.dtsi | 36 ++++++++++++++++++++++++++++++++++++
>   1 file changed, 36 insertions(+)
>
> diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
> index 187d056f7ad2..9f42ebfa50f2 100644
> --- a/arch/arm/boot/dts/berlin2q.dtsi
> +++ b/arch/arm/boot/dts/berlin2q.dtsi
> @@ -286,6 +286,19 @@
>   				status = "disabled";
>   			};
>
> +			spi0: spi@...0 {
> +				compatible = "snps,dw-apb-ssi";
> +				reg = <0x1c00 0x100>;
> +				interrupts = <7>;
> +				clocks = <&chip_clk CLKID_CFG>;
> +				pinctrl-0 = <&spi1_pmux>;

Antoine,

you missed s/spi0/spi1/ and the same for the node below?

BTW, you have any SPI device to test this? If you are brave
enough you could read the flash from the Berlin secure boot
SPI key ;)

Sebastian

> +				pinctrl-names = "default";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				num-cs = <4>;
> +				status = "disabled";
> +			};
> +
>   			timer0: timer@...0 {
>   				compatible = "snps,dw-apb-timer";
>   				reg = <0x2c00 0x14>;
> @@ -383,6 +396,11 @@
>   					groups = "G7";
>   					function = "twsi1";
>   				};
> +
> +				spi1_pmux: spi1-pmux {
> +					groups = "G8";
> +					function = "spi1";
> +				};
>   			};
>
>   			chip_rst: reset {
> @@ -473,6 +491,19 @@
>   				};
>   			};
>
> +			spi1: spi@...0 {
> +				compatible = "snps,dw-apb-ssi";
> +				reg = <0x6000 0x100>;
> +				interrupts = <5>;
> +				clocks = <&refclk>;
> +				pinctrl-0 = <&spi2_pmux>;
> +				pinctrl-names = "default";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				num-cs = <4>;
> +				status = "disabled";
> +			};
> +
>   			i2c2: i2c@...0 {
>   				compatible = "snps,designware-i2c";
>   				#address-cells = <1>;
> @@ -564,6 +595,11 @@
>   						groups = "GSM14";
>   						function = "twsi3";
>   					};
> +
> +					spi2_pmux: spi2-pmux {
> +						groups = "GSM3";
> +						function = "spi2";
> +					};
>   				};
>   			};
>
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/