| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 28 May 2015 15:47:42 +0300
From: Irina Tirdea <irina.tirdea@...el.com>
To: Dmitry Torokhov <dmitry.torokhov@...il.com>,
Bastien Nocera <hadess@...ess.net>,
linux-input@...r.kernel.org, devicetree@...r.kernel.org
Cc: linux-kernel@...r.kernel.org,
Irina Tirdea <irina.tirdea@...el.com>,
Octavian Purdila <octavian.purdila@...el.com>
Subject: [PATCH 6/9] input: goodix: write configuration data to device
Goodix devices can be configured by writing this information
to the device at init. The configuration data can
be provided through the ACPI/device tree property
"device-config". If "device-config" is not set, the default
device configuration will be used.
Signed-off-by: Octavian Purdila <octavian.purdila@...el.com>
Signed-off-by: Irina Tirdea <irina.tirdea@...el.com>
---
.../bindings/input/touchscreen/goodix.txt | 5 +
drivers/input/touchscreen/goodix.c | 143 +++++++++++++++++++++
2 files changed, 148 insertions(+)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
index 7137881..9e4ff69 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
@@ -15,6 +15,11 @@ Required properties:
- irq-gpio : GPIO pin used for IRQ
- reset-gpio : GPIO pin used for reset
+Optional properties:
+
+ - device-config : device configuration information (specified as byte
+ array). Maximum size is 240 bytes.
+
Example:
i2c@...00000 {
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index 4405c55..22052c9 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -41,6 +41,8 @@ struct goodix_ts_data {
#define GOODIX_GPIO_INT_NAME "irq"
#define GOODIX_GPIO_RST_NAME "reset"
+#define GOODIX_DEVICE_CONFIG_PROPERTY "device-config"
+
#define GOODIX_MAX_HEIGHT 4096
#define GOODIX_MAX_WIDTH 4096
#define GOODIX_INT_TRIGGER 1
@@ -94,6 +96,39 @@ static int goodix_i2c_read(struct i2c_client *client,
return ret < 0 ? ret : (ret != ARRAY_SIZE(msgs) ? -EIO : 0);
}
+/**
+ * goodix_i2c_write - write data to a register of the i2c slave device.
+ *
+ * @client: i2c device.
+ * @reg: the register to write to.
+ * @buf: raw data buffer to write.
+ * @len: length of the buffer to write
+ */
+static int goodix_i2c_write(struct i2c_client *client, u16 reg, u8 *buf,
+ unsigned len)
+{
+ u8 *addr_buf;
+ struct i2c_msg msg;
+ int ret;
+
+ addr_buf = kmalloc(len + 2, GFP_KERNEL);
+ if (!addr_buf)
+ return -ENOMEM;
+
+ addr_buf[0] = reg >> 8;
+ addr_buf[1] = reg & 0xFF;
+ memcpy(&addr_buf[2], buf, len);
+
+ msg.flags = 0;
+ msg.addr = client->addr;
+ msg.buf = addr_buf;
+ msg.len = len + 2;
+
+ ret = i2c_transfer(client->adapter, &msg, 1);
+ kfree(addr_buf);
+ return ret < 0 ? ret : (ret != 1 ? -EIO : 0);
+}
+
static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
{
int touch_num;
@@ -192,6 +227,109 @@ static irqreturn_t goodix_ts_irq_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
+/**
+ * goodix_get_cfg - Get device config from ACPI/DT.
+ *
+ * @ts: goodix_ts_data pointer
+ * @config: pointer to the config buffer
+ * @cfg_len: pointer to size of the config buffer
+ */
+static int goodix_get_cfg(struct goodix_ts_data *ts, u8 **config, int *cfg_len)
+{
+ int ret, i, raw_cfg_len;
+ u8 check_sum = 0;
+
+ ret = device_property_read_u8_array(&ts->client->dev,
+ GOODIX_DEVICE_CONFIG_PROPERTY,
+ NULL, 0);
+ if (ret <= 0) {
+ dev_err(&ts->client->dev, "No %s property.\n",
+ GOODIX_DEVICE_CONFIG_PROPERTY);
+ return 0;
+ }
+
+ *cfg_len = ret;
+ if (*cfg_len > GOODIX_CONFIG_MAX_LENGTH) {
+ dev_err(&ts->client->dev,
+ "The length of the config buffer array is not correct");
+ return -EINVAL;
+ }
+
+ *config = kmalloc(*cfg_len, GFP_KERNEL);
+ if (!*config)
+ return -ENOMEM;
+
+ ret = device_property_read_u8_array(&ts->client->dev,
+ GOODIX_DEVICE_CONFIG_PROPERTY,
+ *config, *cfg_len);
+ if (ret < 0) {
+ dev_err(&ts->client->dev, "Invalid %s property: %d\n",
+ GOODIX_DEVICE_CONFIG_PROPERTY, ret);
+ goto err_free;
+ }
+
+ raw_cfg_len = *cfg_len - 2;
+ for (i = 0; i < raw_cfg_len; i++)
+ check_sum += (*config)[i];
+ check_sum = (~check_sum) + 1;
+ if (check_sum != (*config)[raw_cfg_len]) {
+ dev_err(&ts->client->dev,
+ "The checksum of the config buffer array is not correct");
+ ret = -EINVAL;
+ goto err_free;
+ }
+ if ((*config)[raw_cfg_len + 1] != 1) {
+ dev_err(&ts->client->dev,
+ "The Config_Fresh register needs to be set");
+ ret = -EINVAL;
+ goto err_free;
+ }
+
+ return 0;
+
+err_free:
+ kfree(*config);
+ return ret;
+}
+
+/**
+ * goodix_send_cfg - Write device config
+ *
+ * @ts: goodix_ts_data pointer
+ */
+static int goodix_send_cfg(struct goodix_ts_data *ts)
+{
+ int ret, cfg_len = 0;
+ u8 *config = NULL;
+
+ ret = goodix_get_cfg(ts, &config, &cfg_len);
+ if (ret)
+ return ret;
+
+ /* No config property in device tree */
+ if (!cfg_len)
+ return 0;
+
+ ret = goodix_i2c_write(ts->client, GOODIX_REG_CONFIG_DATA, config,
+ cfg_len);
+ if (ret) {
+ dev_err(&ts->client->dev, "Failed to send the config : %d",
+ ret);
+ goto err_free;
+ }
+ dev_dbg(&ts->client->dev, "Config sent successfully.");
+
+ /* Let the firmware reconfigure itself, so sleep for 10ms */
+ usleep_range(10000, 11000);
+
+ kfree(config);
+ return 0;
+
+err_free:
+ kfree(config);
+ return ret;
+}
+
static int goodix_int_sync(struct goodix_ts_data *ts)
{
int ret;
@@ -465,6 +603,11 @@ static int goodix_ts_probe(struct i2c_client *client,
return error;
}
+ /* send device configuration to the firmware */
+ error = goodix_send_cfg(ts);
+ if (error)
+ return error;
+
goodix_read_config(ts);
error = goodix_request_input_dev(ts, version_info, id_info);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists