| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 16 Jun 2015 10:41:09 +0200
From: Ricardo Ribalda Delgado <ricardo.ribalda@...il.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jslaby@...e.cz>, Alan Cox <alan@...ux.intel.com>,
"Rafael J. Wysocki" <rafael.j.wysocki@...el.com>,
Peter Huewe <PeterHuewe@....de>, linux-serial@...r.kernel.org,
linux-kernel@...r.kernel.org, peter_hong@...tek.com.tw
Cc: Ricardo Ribalda Delgado <ricardo.ribalda@...il.com>
Subject: [PATCH v3 5/5] serial/8250_fintek: Support for any io address.
Fintek chip can be configured for io addresses different than the standard.
Query the chip for the configured addresses and try to match it with the
pnp address.
Reported-by: Peter Hong <peter_hong@...tek.com.tw>
Reviewed-by: Alan Cox <alan@...ux.intel.com>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@...il.com>
---
drivers/tty/serial/8250/8250_fintek.c | 51 ++++++++++++++++++-----------------
1 file changed, 27 insertions(+), 24 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index 8fa4d88fc98f..76e6313978de 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -28,6 +28,8 @@
#define VENDOR_ID1_VAL 0x19
#define VENDOR_ID2 0x24
#define VENDOR_ID2_VAL 0x34
+#define IO_ADDR1 0x61
+#define IO_ADDR2 0x60
#define LDN 0x7
#define RS485 0xF0
@@ -63,18 +65,6 @@ static void fintek_8250_exit_key(u16 base_port)
release_region(base_port + ADDR_PORT, 2);
}
-static int fintek_8250_get_index(resource_size_t base_addr)
-{
- resource_size_t base[] = {0x3f8, 0x2f8, 0x3e8, 0x2e8};
- int i;
-
- for (i = 0; i < ARRAY_SIZE(base); i++)
- if (base_addr == base[i])
- return i;
-
- return -ENODEV;
-}
-
static int fintek_8250_check_id(u16 base_port)
{
u16 chip;
@@ -148,24 +138,41 @@ static int fintek_8250_rs485_config(struct uart_port *port,
return 0;
}
-static int fintek_8250_base_port(u8 *key)
+static int fintek_8250_base_port(u16 io_address, u8 *key, u8 *index)
{
static const u16 addr[] = {0x4e, 0x2e};
static const u16 keys[] = {0x77, 0xa0, 0x87, 0x67};
- int i, j;
+ int i, j, k;
for (i = 0; i < ARRAY_SIZE(addr); i++) {
for (j = 0; j < ARRAY_SIZE(keys); j++) {
- int ret;
if (fintek_8250_enter_key(addr[i], keys[j]))
continue;
- ret = fintek_8250_check_id(addr[i]);
- fintek_8250_exit_key(addr[i]);
- if (!ret) {
+ if (fintek_8250_check_id(addr[i])) {
+ fintek_8250_exit_key(addr[i]);
+ continue;
+ }
+
+ for (k = 0; k < 4; k++) {
+ u16 aux;
+
+ outb(LDN, addr[i] + ADDR_PORT);
+ outb(k, addr[i] + DATA_PORT);
+
+ outb(IO_ADDR1, addr[i] + ADDR_PORT);
+ aux = inb(addr[i] + DATA_PORT);
+ outb(IO_ADDR2, addr[i] + ADDR_PORT);
+ aux |= inb(addr[i] + DATA_PORT) << 8;
+ if (aux != io_address)
+ continue;
+
+ fintek_8250_exit_key(addr[i]);
*key = keys[j];
+ *index = k;
return addr[i];
}
+ fintek_8250_exit_key(addr[i]);
}
}
@@ -177,21 +184,17 @@ fintek_8250_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
struct uart_8250_port uart;
struct fintek_8250 *pdata;
- int index;
int base_port;
u8 key;
+ u8 index;
if (!pnp_port_valid(dev, 0))
return -ENODEV;
- base_port = fintek_8250_base_port(&key);
+ base_port = fintek_8250_base_port(pnp_port_start(dev, 0), &key, &index);
if (base_port < 0)
return -ENODEV;
- index = fintek_8250_get_index(pnp_port_start(dev, 0));
- if (index < 0)
- return -ENODEV;
-
memset(&uart, 0, sizeof(uart));
pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL);
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists