linux-kernel - Re: [PATCH-V5 3/4] mfd: 88pm800: Set default interrupt clear method

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Tue, 30 Jun 2015 09:29:26 +0900
From:	Krzysztof Kozlowski <k.kozlowski@...sung.com>
To:	Vaibhav Hiremath <vaibhav.hiremath@...aro.org>
Cc:	linux-arm-kernel@...ts.infradead.org, Zhao Ye <zhaoy@...vell.com>,
	devicetree@...r.kernel.org, sameo@...ux.intel.com,
	yizhang@...vell.com, linux-kernel@...r.kernel.org,
	robh+dt@...nel.org, lee.jones@...aro.org
Subject: Re: [PATCH-V5 3/4] mfd: 88pm800: Set default interrupt clear method

2015-06-30 0:31 GMT+09:00 Vaibhav Hiremath <vaibhav.hiremath@...aro.org>:
> As per the spec, bit 1 (INT_CLEAR_MODE) of reg addr 0xe
> (page 0) controls the method of clearing interrupt
> status of 88pm800 family of devices;
>
>   0: clear on read
>   1: clear on write
>
> If pdata is not coming from board file, then set the
> default irq clear method to "irq clear on write"
>
> Also, as suggested by "Lee Jones" renaming variable field
> to appropriate name.
>
> Signed-off-by: Zhao Ye <zhaoy@...vell.com>
> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@...aro.org>
> ---
>  drivers/mfd/88pm800.c       | 15 ++++++++++-----
>  include/linux/mfd/88pm80x.h | 10 ++++++++--
>  2 files changed, 18 insertions(+), 7 deletions(-)
>

Looks fine to me.

Reviewed-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>

Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/