lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:	Mon, 13 Jul 2015 00:07:31 -0400
From:	Bandan Das <bsd@...hat.com>
To:	kvm@...r.kernel.org
Cc:	netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
	mst@...hat.com, Eyal Moscovici <EYALMO@...ibm.com>,
	Razya Ladelsky <RAZYA@...ibm.com>, cgroups@...r.kernel.org,
	jasowang@...hat.com
Subject: [RFC PATCH 0/4] Shared vhost design 

Hello,

There have been discussions on improving the current vhost design. The first
attempt, to my knowledge was Shirley Ma's patch to create a dedicated vhost
worker per cgroup.

http://comments.gmane.org/gmane.linux.network/224730

Later, I posted a cmwq based approach for performance comparisions
http://comments.gmane.org/gmane.linux.network/286858

More recently was the Elvis work that was presented in KVM Forum 2013
http://www.linux-kvm.org/images/a/a3/Kvm-forum-2013-elvis.pdf

The Elvis patches rely on common vhost thread design for scalability
along with polling for performance. Since there are two major changes
being proposed, we decided to split up the work. The first (this RFC),
proposing a re-design of the vhost threading model and the second part
(not posted yet) to focus more on improving performance. 

I am posting this with the hope that we can have a meaningful discussion
on the proposed new architecture. We have run some tests to show that the new
design is scalable and in terms of performance, is comparable to the current
stable design. 

Test Setup:
The testing is based on the setup described in the Elvis proposal.
The initial tests are just an aggregate of Netperf STREAM and MAERTS but
as we progress, I am happy to run more tests. The hosts are two identical
16 core Haswell systems with point to point network links. For the first 10 runs,
with n=1 upto n=10 guests running in parallel, I booted the target system with nr_cpus=8
and mem=12G. The purpose was to do a comparision of resource utilization
and how it affects performance. Finally, with the number of guests set at 14,
I didn't limit the number of CPUs booted on the host or limit memory seen by
the kernel but boot the kernel with isolcpus=14,15 that will be used to run
the vhost threads. The guests are pinned to cpus 0-13 and based on which
cpu the guest is running on, the corresponding I/O thread is either pinned
to cpu 14 or 15.

Results
# X axis is number of guests
# Y axis is netperf number
# nr_cpus=8 and mem=12G
#Number of Guests        #Baseline            #ELVIS
1                        1119.3		      1111.0
2			 1135.6		      1130.2
3			 1135.5		      1131.6
4			 1136.0		      1127.1
5			 1118.6		      1129.3
6			 1123.4		      1129.8
7			 1128.7		      1135.4
8			 1129.9		      1137.5
9			 1130.6		      1135.1
10			 1129.3		      1138.9
14*			 1173.8		      1216.9

#* Last run with the vCPU and I/O thread(s) pinned, no CPU/memory limit imposed.
#  I/O thread runs on CPU 14 or 15 depending on which guest it's serving

There's a simple graph at
http://people.redhat.com/~bdas/elvis/data/results.png
that shows how task affinity results in a jump and even without it,
as the number of guests increase, the shared vhost design performs
slightly better.

Observations:
1. In terms of "stock" performance, the results are comparable.
2. However, with a tuned setup, even without polling, we see an improvement
with the new design.
3. Making the new design simulate old behavior would be a matter of setting
the number of guests per vhost threads to 1.
4. Maybe, setting a per guest limit on the work being done by a specific vhost
thread is needed for it to be fair.
5. cgroup associations needs to be figured out. I just slightly hacked the
current cgroup association mechanism to work with the new model. Ccing cgroups
for input/comments.

Many thanks to Razya Ladelsky and Eyal Moscovici, IBM for the initial
patches, the helpful testing suggestions and discussions.

Bandan Das (4):
  vhost: Introduce a universal thread to serve all users
  vhost: Limit the number of devices served by a single worker thread
  cgroup: Introduce a function to compare cgroups
  vhost: Add cgroup-aware creation of worker threads

 drivers/vhost/net.c    |   6 +-
 drivers/vhost/scsi.c   |  18 ++--
 drivers/vhost/vhost.c  | 272 +++++++++++++++++++++++++++++++++++--------------
 drivers/vhost/vhost.h  |  32 +++++-
 include/linux/cgroup.h |   1 +
 kernel/cgroup.c        |  40 ++++++++
 6 files changed, 275 insertions(+), 94 deletions(-)

-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ