lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Wed, 22 Jul 2015 04:03:07 +0200
From:	Sebastian Reichel <sre@...nel.org>
To:	Michael Welling <mwelling@...e.org>
Cc:	Pavel Machek <pavel@....cz>,
	Pali Rohár <pali.rohar@...il.com>,
	Tony Lindgren <tony@...mide.com>,
	Ivaylo Dimitrov <ivo.g.dimitrov.75@...il.com>,
	Aaro Koskinen <aaro.koskinen@....fi>,
	Nishanth Menon <nm@...com>, linux-omap@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: linux 4.2-rc1 broken Nokia N900

Hi,

On Tue, Jul 21, 2015 at 07:17:41PM -0500, Michael Welling wrote:
> On Tue, Jul 21, 2015 at 11:34:41AM +0200, Pavel Machek wrote:
> 
> This code has my head spinning.
> 
> I found that the errors do not occur when the driver is built into the kernel.
> 
> I also found that with the patch below the errors go away.
> 
> Not sure if it is acceptible but see if it fixes things on your side.
> 
> 
> diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
> index cf8b91b..3164d13 100644
> --- a/drivers/spi/spi.c
> +++ b/drivers/spi/spi.c
> @@ -1801,11 +1801,11 @@ int spi_setup(struct spi_device *spi)
>  	if (!spi->max_speed_hz)
>  		spi->max_speed_hz = spi->master->max_speed_hz;
>  
> -	spi_set_cs(spi, false);
> -
>  	if (spi->master->setup)
>  		status = spi->master->setup(spi);
>  
> +	spi_set_cs(spi, false);
> +
>  	dev_dbg(&spi->dev, "setup mode %d, %s%s%s%s%u bits/w, %u Hz max --> %d\n",
>  			(int) (spi->mode & (SPI_CPOL | SPI_CPHA)),
>  			(spi->mode & SPI_CS_HIGH) ? "cs_high, " : "",

mh. maybe a runtime PM issue?

 * external abort on non-linefetch: address cannot be accessed,
   since the module's clocks are disabled
 * built-in works, module not: built-in is probably a little bit
   faster (module must not be loaded from filesystem), so that
   the device has not yet been suspended
 * Before 4.2, omap2_mcspi_set_cs() was called in the setup
   routine, which acquired runtime PM
 * In 4.2, omap2_mcspi_set_cs() seems to be called without a
   prior pm_runtime_get_sync()
 * With your workaround, the device has not yet returned to
   suspend after the runtime PM acquisition in setup()

So I suggest trying the following (compile tested only) patch:

-- Sebastian

diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 5867384..f7d9ffd 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -245,6 +245,7 @@ static void omap2_mcspi_set_enable(const struct spi_device *spi, int enable)
 
 static void omap2_mcspi_set_cs(struct spi_device *spi, bool enable)
 {
+       struct omap2_mcspi *mcspi = spi_master_get_devdata(spi->master);
        u32 l;
 
        /* The controller handles the inverted chip selects
@@ -255,6 +256,8 @@ static void omap2_mcspi_set_cs(struct spi_device *spi, bool enable)
                enable = !enable;
 
        if (spi->controller_state) {
+               pm_runtime_get_sync(mcspi->dev);
+
                l = mcspi_cached_chconf0(spi);
 
                if (enable)
@@ -263,6 +266,9 @@ static void omap2_mcspi_set_cs(struct spi_device *spi, bool enable)
                        l |= OMAP2_MCSPI_CHCONF_FORCE;
 
                mcspi_write_chconf0(spi, l);
+
+               pm_runtime_mark_last_busy(mcspi->dev);
+               pm_runtime_put_autosuspend(mcspi->dev);
        }
 }
 

Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ