lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:	Fri, 31 Jul 2015 09:44:11 +0100
From:	Jon Hunter <jonathanh@...dia.com>
To:	Marc Zyngier <marc.zyngier@....com>,
	Russell King <linux@....linux.org.uk>,
	Nicolas Pitre <nicolas.pitre@...aro.org>,
	Thomas Gleixner <tglx@...utronix.de>,
	Jason Cooper <jason@...edaemon.net>
CC:	<linux-kernel@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>,
	Jon Hunter <jonathanh@...dia.com>
Subject: [PATCH V2 1/2] irqchip/gic: Only allow the primary GIC to set the CPU map

The gic_init_bases() function initialises an array that stores the mapping
between the GIC and CPUs. This array is a global array that is
unconditionally initialised on every call to gic_init_bases(). Although,
it is not common for there to be more than one GIC instance, there are
some devices that do support nested GIC controllers and gic_init_bases()
can be called more than once.

A 2nd call to gic_init_bases() will clear the previous CPU mapping and
will only setup the mapping again for the CPU calling gic_init_bases().
Fix this by only allowing the CPU map to be configured for the primary GIC.

For secondary GICs the CPU map is not relevant because these GICs do not
directly route the interrupts to the main CPU(s) but to other GICs or
devices.

Signed-off-by: Jon Hunter <jonathanh@...dia.com>
---
V2 changes:
- Rebased on v4.2-rc4

 drivers/irqchip/irq-gic.c | 43 +++++++++++++++++++++++++------------------
 1 file changed, 25 insertions(+), 18 deletions(-)

diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 4dd88264dff5..dc5090543eca 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -401,19 +401,26 @@ static void gic_cpu_init(struct gic_chip_data *gic)
 	int i;
 
 	/*
-	 * Get what the GIC says our CPU mask is.
+	 * Setting up the CPU map is only relevant for the primary GIC
+	 * because any nested/secondary GICs do not directly interface
+	 * with the CPU(s).
 	 */
-	BUG_ON(cpu >= NR_GIC_CPU_IF);
-	cpu_mask = gic_get_cpumask(gic);
-	gic_cpu_map[cpu] = cpu_mask;
+	if (gic == &gic_data[0]) {
+		/*
+		 * Get what the GIC says our CPU mask is.
+		 */
+		BUG_ON(cpu >= NR_GIC_CPU_IF);
+		cpu_mask = gic_get_cpumask(gic);
+		gic_cpu_map[cpu] = cpu_mask;
 
-	/*
-	 * Clear our mask from the other map entries in case they're
-	 * still undefined.
-	 */
-	for (i = 0; i < NR_GIC_CPU_IF; i++)
-		if (i != cpu)
-			gic_cpu_map[i] &= ~cpu_mask;
+		/*
+		 * Clear our mask from the other map entries in case they're
+		 * still undefined.
+		 */
+		for (i = 0; i < NR_GIC_CPU_IF; i++)
+			if (i != cpu)
+				gic_cpu_map[i] &= ~cpu_mask;
+	}
 
 	gic_cpu_config(dist_base, NULL);
 
@@ -930,13 +937,6 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
 	}
 
 	/*
-	 * Initialize the CPU interface map to all CPUs.
-	 * It will be refined as each CPU probes its ID.
-	 */
-	for (i = 0; i < NR_GIC_CPU_IF; i++)
-		gic_cpu_map[i] = 0xff;
-
-	/*
 	 * Find out how many interrupts are supported.
 	 * The GIC only supports up to 1020 interrupt sources.
 	 */
@@ -981,6 +981,13 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
 		return;
 
 	if (gic_nr == 0) {
+		/*
+		 * Initialize the CPU interface map to all CPUs.
+		 * It will be refined as each CPU probes its ID.
+		 * This is only necessary for the primary GIC.
+		 */
+		for (i = 0; i < NR_GIC_CPU_IF; i++)
+			gic_cpu_map[i] = 0xff;
 #ifdef CONFIG_SMP
 		set_smp_cross_call(gic_raise_softirq);
 		register_cpu_notifier(&gic_cpu_notifier);
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ