| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 31 Jul 2015 13:12:17 +0100
From: Marc Zyngier <marc.zyngier@....com>
To: Ley Foon Tan <lftan@...era.com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Russell King <linux@....linux.org.uk>,
Arnd Bergmann <arnd@...db.de>,
Dinh Nguyen <dinguyen@...nsource.altera.com>
CC: devicetree@...r.kernel.org, lftan.linux@...il.com,
linux-doc@...r.kernel.org, linux-pci@...r.kernel.org,
linux-kernel@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v2 3/5] pci: altera: Add Altera PCIe MSI driver
On 31/07/15 11:15, Ley Foon Tan wrote:
> This patch adds Altera PCIe MSI driver. This soft IP supports configurable
> number of vectors, which is a dts parameter.
I've reviewed the initial drop of this code; basic courtesy would be to
keep me CCed on the follow-up series.
>
> Signed-off-by: Ley Foon Tan <lftan@...era.com>
> ---
> drivers/pci/host/Kconfig | 7 +
> drivers/pci/host/Makefile | 1 +
> drivers/pci/host/pcie-altera-msi.c | 324 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 332 insertions(+)
> create mode 100644 drivers/pci/host/pcie-altera-msi.c
>
> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> index 108500a..51d0468 100644
> --- a/drivers/pci/host/Kconfig
> +++ b/drivers/pci/host/Kconfig
> @@ -153,4 +153,11 @@ config PCIE_ALTERA
> Say Y here if you want to enable PCIe controller support for Altera
> SoCFPGA family of SoCs.
>
> +config PCIE_ALTERA_MSI
> + bool "Altera PCIe MSI feature"
> + depends on PCI_MSI
> + help
> + Say Y here if you want PCIe MSI support for the Altera SocFPGA SoC.
> + This MSI driver supports Altera MSI to GIC controller IP.
> +
> endmenu
> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> index 6954f76..6c4913d 100644
> --- a/drivers/pci/host/Makefile
> +++ b/drivers/pci/host/Makefile
> @@ -18,3 +18,4 @@ obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
> obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
> obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
> obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
> +obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
> diff --git a/drivers/pci/host/pcie-altera-msi.c b/drivers/pci/host/pcie-altera-msi.c
> new file mode 100644
> index 0000000..6014719
> --- /dev/null
> +++ b/drivers/pci/host/pcie-altera-msi.c
> @@ -0,0 +1,324 @@
> +/*
> + * Copyright Altera Corporation (C) 2013-2015. All rights reserved
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +#include <linux/interrupt.h>
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/module.h>
> +#include <linux/msi.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_pci.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +#define MSI_STATUS 0x0
> +#define MSI_ERROR 0x4
> +#define MSI_INTMASK 0x8
> +
> +#define MAX_MSI_VECTORS 32
> +struct altera_msi {
> + DECLARE_BITMAP(used, MAX_MSI_VECTORS);
> + struct mutex lock; /* proctect used variable */
> + struct platform_device *pdev;
> + struct irq_domain *msi_domain;
> + struct irq_domain *inner_domain;
> + void __iomem *csr_base;
> + void __iomem *vector_base;
> + phys_addr_t vector_phy;
> + u32 num_of_vectors;
> + int irq;
> +};
> +
> +static inline void msi_writel(struct altera_msi *msi, u32 value, u32 reg)
> +{
> + writel_relaxed(value, msi->csr_base + reg);
> +}
> +
> +static inline u32 msi_readl(struct altera_msi *msi, u32 reg)
> +{
> + return readl_relaxed(msi->csr_base + reg);
> +}
> +
> +static void altera_msi_isr(unsigned int irq, struct irq_desc *desc)
> +{
> + struct irq_chip *chip = irq_desc_get_chip(desc);
> + struct altera_msi *msi;
> + unsigned long status;
> + u32 num_of_vectors;
> + u32 bit;
> +
> + chained_irq_enter(chip, desc);
> + msi = irq_desc_get_handler_data(desc);
> + num_of_vectors = msi->num_of_vectors;
> +
> + do {
> + status = msi_readl(msi, MSI_STATUS);
> + if (!status)
> + break;
> +
> + do {
> + bit = find_first_bit(&status, num_of_vectors);
> + /* Dummy read from vector to clear the interrupt */
> + readl_relaxed(msi->vector_base + (bit * sizeof(u32)));
> +
> + irq = irq_find_mapping(msi->inner_domain, bit);
Use of irq is a bit confusing, as this is a parameter describing the
chaining interrupt. Consider using a different name for this variable.
> + if (irq) {
> + if (test_bit(bit, msi->used))
> + generic_handle_irq(irq);
> + else
> + dev_info(&msi->pdev->dev, "unhandled MSI\n");
> + } else
> + dev_info(&msi->pdev->dev, "unexpected MSI\n");
The whole statement could be rewritten as:
if (irq && test_bit(bit, msi->used))
generic_handle_irq(irq);
else
dev_err(...);
In all cases, this is a grave error, so dev_info is not appropriate here.
> +
> + /* Clear the bit from status and repeat without reading
> + * again status register. */
> + clear_bit(bit, &status);
You don't need an atomic operation here, so __clear_bit() should be enough.
> + } while (status);
> + } while (1);
> +
> + chained_irq_exit(chip, desc);
> +}
> +
> +static struct irq_chip altera_msi_irq_chip = {
> + .name = "Altera PCIe MSI",
> + .irq_enable = pci_msi_unmask_irq,
> + .irq_disable = pci_msi_mask_irq,
> + .irq_mask = pci_msi_mask_irq,
> + .irq_unmask = pci_msi_unmask_irq,
> +};
> +
> +static struct msi_domain_info altera_msi_domain_info = {
> + .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
> + MSI_FLAG_PCI_MSIX),
> + .chip = &altera_msi_irq_chip,
> +};
> +
> +static void altera_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
> +{
> + u32 mask;
> + struct altera_msi *msi = irq_data_get_irq_chip_data(data);
> + u64 addr = msi->vector_phy + (data->hwirq * sizeof(u32));
Use phys_addr_t.
> +
> + msg->address_lo = lower_32_bits(addr);
> + msg->address_hi = upper_32_bits(addr);
> + msg->data = data->hwirq;
> +
> + mask = msi_readl(msi, MSI_INTMASK);
> + mask |= 1 << data->hwirq;
> + msi_writel(msi, mask, MSI_INTMASK);
It feels a bit weird to unmask the interrupt when you compose the
message. I'd expect this to be done in the mask/unmask methods.
> + dev_dbg(&msi->pdev->dev, "msi#%d address_lo 0x%x\n", (int)data->hwirq,
> + msg->address_lo);
You may want to print the whole address here.
> +}
> +
> +static int altera_msi_set_affinity(struct irq_data *irq_data,
> + const struct cpumask *mask, bool force)
> +{
> + return -EINVAL;
> +}
> +
> +static struct irq_chip altera_msi_bottom_irq_chip = {
> + .name = "Altera MSI",
> + .irq_compose_msi_msg = altera_compose_msi_msg,
> + .irq_set_affinity = altera_msi_set_affinity,
> +};
> +
> +static int altera_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> + unsigned int nr_irqs, void *args)
> +{
> + struct altera_msi *msi = domain->host_data;
> + int bit;
> +
> + mutex_lock(&msi->lock);
> +
> + bit = find_first_zero_bit(msi->used, msi->num_of_vectors);
> + if (bit < msi->num_of_vectors)
> + set_bit(bit, msi->used);
> +
> + mutex_unlock(&msi->lock);
> +
> + if (bit < 0)
> + return bit;
How can "bit" be negative here? find_first_zero_bit returns an unsigned
long... You probably want to change the type of "bit" to reflect that.
> + else if (bit >= msi->num_of_vectors)
Useless "else" anyway.
> + return -ENOSPC;
> +
> + irq_domain_set_info(domain, virq, bit, &altera_msi_bottom_irq_chip,
> + domain->host_data, handle_simple_irq,
> + NULL, NULL);
> + set_irq_flags(virq, IRQF_VALID);
> +
> + return 0;
> +}
> +
> +static void altera_irq_domain_free(struct irq_domain *domain,
> + unsigned int virq, unsigned int nr_irqs)
> +{
> + struct irq_data *d = irq_domain_get_irq_data(domain, virq);
> + struct altera_msi *msi = irq_data_get_irq_chip_data(d);
> + u32 mask;
> +
> + mutex_lock(&msi->lock);
> +
> + if (!test_bit(d->hwirq, msi->used))
> + dev_err(&msi->pdev->dev, "trying to free unused MSI#%lu\n",
> + d->hwirq);
Put this statement in { } so that it matches the "else" construct.
> + else {
> + clear_bit(d->hwirq, msi->used);
No need for an atomic operation here, you own the mutex.
> + mask = msi_readl(msi, MSI_INTMASK);
> + mask &= ~(1 << d->hwirq);
> + msi_writel(msi, mask, MSI_INTMASK);
> + }
> +
> + mutex_unlock(&msi->lock);
> +}
> +
> +static const struct irq_domain_ops msi_domain_ops = {
> + .alloc = altera_irq_domain_alloc,
> + .free = altera_irq_domain_free,
> +};
> +
> +static int altera_allocate_domains(struct altera_msi *msi)
> +{
> + msi->inner_domain = irq_domain_add_linear(NULL, msi->num_of_vectors,
> + &msi_domain_ops, msi);
> + if (!msi->inner_domain) {
> + dev_err(&msi->pdev->dev, "failed to create IRQ domain\n");
> + return -ENOMEM;
> + }
> +
> + msi->msi_domain = pci_msi_create_irq_domain(
> + msi->pdev->dev.of_node,
Please put at least one argument to the function on the same line. This
is otherwise very hard to read.
> + &altera_msi_domain_info, msi->inner_domain);
> + if (!msi->msi_domain) {
> + dev_err(&msi->pdev->dev, "failed to create MSI domain\n");
> + irq_domain_remove(msi->inner_domain);
> + return -ENOMEM;
> + }
> +
> + return 0;
> +}
> +
> +static void altera_free_domains(struct altera_msi *msi)
> +{
> + irq_domain_remove(msi->msi_domain);
> + irq_domain_remove(msi->inner_domain);
> +}
> +
> +
> +static int altera_msi_remove(struct platform_device *pdev)
> +{
> + struct altera_msi *msi = platform_get_drvdata(pdev);
> +
> + msi_writel(msi, 0, MSI_INTMASK);
> + irq_set_chained_handler(msi->irq, NULL);
> + irq_set_handler_data(msi->irq, NULL);
> +
> + altera_free_domains(msi);
> +
> + platform_set_drvdata(pdev, NULL);
> + return 0;
> +}
> +
> +int altera_msi_probe(struct platform_device *pdev)
Make this static.
> +{
> + struct altera_msi *msi;
> + struct device_node *np = pdev->dev.of_node;
> + struct resource *res;
> + int ret;
> +
> + msi = devm_kzalloc(&pdev->dev, sizeof(struct altera_msi),
> + GFP_KERNEL);
> + if (!msi)
> + return -ENOMEM;
> +
> + mutex_init(&msi->lock);
> + msi->pdev = pdev;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "csr");
> + msi->csr_base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(msi->csr_base)) {
> + dev_err(&pdev->dev, "get csr resource failed\n");
> + return PTR_ERR(msi->csr_base);
> + }
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> + "vector_slave");
> + msi->vector_base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(msi->vector_base)) {
> + dev_err(&pdev->dev, "get vector slave resource failed\n");
> + return PTR_ERR(msi->vector_base);
> + }
> +
> + msi->vector_phy = res->start;
> +
> + if (of_property_read_u32(np, "num-vectors", &msi->num_of_vectors)) {
> + dev_err(&pdev->dev, "failed to parse the number of vectors\n");
> + return -EINVAL;
> + }
> +
> + ret = altera_allocate_domains(msi);
> + if (ret)
> + return ret;
> +
> + msi->irq = platform_get_irq(pdev, 0);
> + if (msi->irq <= 0) {
> + dev_err(&pdev->dev, "failed to map IRQ: %d\n", msi->irq);
> + ret = -ENODEV;
> + goto err;
> + }
> +
> + irq_set_chained_handler(msi->irq, altera_msi_isr);
> + ret = irq_set_handler_data(msi->irq, msi);
Use irq_set_chained_handler_and_data.
> + if (ret) {
> + dev_err(&pdev->dev, "failed to register IRQ handler: %d\n",
> + ret);
> + goto err;
> + }
> +
> + platform_set_drvdata(pdev, msi);
> +
> + return 0;
> +
> +err:
> + altera_msi_remove(pdev);
> + return ret;
> +}
> +
> +static const struct of_device_id altera_msi_of_match[] = {
> + { .compatible = "altr,msi-1.0", NULL },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, altera_msi_of_match);
> +
> +static struct platform_driver altera_msi_driver = {
> + .driver = {
> + .name = "altera-msi",
> + .owner = THIS_MODULE,
Remove this .owner assignment, the core code deals with it.
> + .of_match_table = altera_msi_of_match,
> + },
> + .probe = altera_msi_probe,
> + .remove = altera_msi_remove,
> +};
> +
> +static int __init altera_msi_init(void)
> +{
> + return platform_driver_register(&altera_msi_driver);
> +}
> +
> +subsys_initcall(altera_msi_init);
Hmmm. if you're initializing this as part of the core kernel, it will
never be a module. What is the point of the MODULE_DEVICE_TABLE above?
> +
> +MODULE_AUTHOR("Ley Foon Tan <lftan@...era.com>");
> +MODULE_DESCRIPTION("Altera PCIe MSI support");
> +MODULE_LICENSE("GPL v2");
>
Thanks,
M.
--
Jazz is not dead. It just smells funny...
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists