linux-kernel - [PATCH v3 0/5] clk: hisilicon: support stub clock

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:	Mon,  3 Aug 2015 09:13:33 +0800
From:	Leo Yan <leo.yan@...aro.org>
To:	Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Catalin Marinas <catalin.marinas@....com>,
	Will Deacon <will.deacon@....com>,
	Michael Turquette <mturquette@...libre.com>,
	Stephen Boyd <sboyd@...eaurora.org>,
	Wei Xu <xuwei5@...ilicon.com>,
	Haojian Zhuang <haojian.zhuang@...aro.org>,
	Bintian Wang <bintian.wang@...wei.com>,
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org, linux-clk@...r.kernel.org,
	Guodong Xu <guodong.xu@...aro.org>,
	Jian Zhang <zhangjian001@...ilicon.com>,
	Zhenwei Wang <Zhenwei.wang@...ilicon.com>,
	Haoju Mo <mohaoju@...ilicon.com>,
	Dan Zhao <dan.zhao@...ilicon.com>, sunzhaosheng@...ilicon.com,
	victor.lixin@...ilicon.com
Cc:	Leo Yan <leo.yan@...aro.org>
Subject: [PATCH v3 0/5] clk: hisilicon: support stub clock

This series adds support for hisilicon stub clock driver. On hi6220,
the bootloader needs load the firmware image and set info for OPPs;
after run into kernel, the stub clock driver is used to communicate
w/t firmware for cpu dynamic frequency scaling.

In patch series v1/v2, the stub clock driver simply writes request in
sram and send ipc to firmware; For patch series v3, the firmware has
been upgraded to use mailbox, so stub clock driver will call standard
mailbox APIs to request mailbox channel and send message to firmware.

These patches have been tested on 96board hikey and is used by cpufreq
driver.

Changes from v2:
* Use platform_device's probe for clock's initialization
* Use mailbox channel for clock frequency change

Changes from v1:
* Refine parameter checking for init flow
* Remove unnecessary debugging info
* Modify to check spinlock pointer when register clocks


Leo Yan (5):
  clk: hisi: refine parameter checking for init
  dt-bindings: arm: Hi6220: add doc for SRAM controller
  dt-bindings: clk: Hi6220: Document stub clock driver
  clk: Hi6220: add stub clock driver
  arm64: dts: add Hi6220's stub clock node

 .../bindings/arm/hisilicon/hisilicon.txt           |  18 ++
 .../devicetree/bindings/clock/hi6220-clock.txt     |  19 +-
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi          |  23 ++
 drivers/clk/hisilicon/Kconfig                      |   2 +-
 drivers/clk/hisilicon/Makefile                     |   2 +-
 drivers/clk/hisilicon/clk-hi6220-stub.c            | 279 +++++++++++++++++++++
 drivers/clk/hisilicon/clk.c                        |  11 +-
 7 files changed, 343 insertions(+), 11 deletions(-)
 create mode 100644 drivers/clk/hisilicon/clk-hi6220-stub.c

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/