Date:	Thu,  6 Aug 2015 17:55:58 -0700
From:	Florian Fainelli <f.fainelli@...il.com>
To:	linux-kernel@...r.kernel.org
Cc:	bcm-kernel-feedback-list@...adcom.com,
	Florian Fainelli <f.fainelli@...il.com>,
	Thierry Reding <thierry.reding@...il.com>,
	Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	linux-pwm@...r.kernel.org (open list:PWM SUBSYSTEM),
	devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND...)
Subject: [PATCH 2/2] pwm: Add Broadcom BCM7038 PWM controller support

Add support for the BCM7038-style PWM controller found in all BCM7xxx STB SoCs.
This controller has a hardcoded 2 channels per controller, and cascades a
variable frequency generator on top of a fixed frequency generator which offers
a range of a 148ns period all the way to ~622ms periods.

Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
 drivers/pwm/Kconfig       |  10 ++
 drivers/pwm/Makefile      |   1 +
 drivers/pwm/pwm-brcmstb.c | 323 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 334 insertions(+)
 create mode 100644 drivers/pwm/pwm-brcmstb.c

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index b1541f40fd8d..28f95cca70ce 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -111,6 +111,16 @@ config PWM_CLPS711X
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-clps711x.
 
+config PWM_BRCMSTB
+	tristate "Broadcom STB PWM support"
+	depends on ARCH_BRCMSTB
+	help
+	  Generic PWM framework driver for the Broadcom Set-top-Box
+	  SoCs (BCM7xxx).
+
+	  To compile this driver as a module, choose M Here: the module
+	  will be called pwm-brcmstb.c.
+
 config PWM_EP93XX
 	tristate "Cirrus Logic EP93xx PWM support"
 	depends on ARCH_EP93XX
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index ec50eb5b5a8f..dc7b1b82d47e 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_PWM_ATMEL_TCB)	+= pwm-atmel-tcb.o
 obj-$(CONFIG_PWM_BCM_KONA)	+= pwm-bcm-kona.o
 obj-$(CONFIG_PWM_BCM2835)	+= pwm-bcm2835.o
 obj-$(CONFIG_PWM_BFIN)		+= pwm-bfin.o
+obj-$(CONFIG_PWM_BRCMSTB)	+= pwm-brcmstb.o
 obj-$(CONFIG_PWM_CLPS711X)	+= pwm-clps711x.o
 obj-$(CONFIG_PWM_EP93XX)	+= pwm-ep93xx.o
 obj-$(CONFIG_PWM_FSL_FTM)	+= pwm-fsl-ftm.o
diff --git a/drivers/pwm/pwm-brcmstb.c b/drivers/pwm/pwm-brcmstb.c
new file mode 100644
index 000000000000..0c5cf5cbcf74
--- /dev/null
+++ b/drivers/pwm/pwm-brcmstb.c
@@ -0,0 +1,323 @@
+/*
+ * Broadcom BCM7038 PWM driver
+ *
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/export.h>
+#include <linux/clk.h>
+#include <linux/pwm.h>
+#include <linux/io.h>
+#include <linux/of.h>
+
+/* The block has a hardcoded number of 2 channels per controller */
+#define NUM_PWM_CHAN		2
+
+/* This block is the "UPG" clock domain which is hardcoded a 27Mhz */
+#define PWM_DEFAULT_FREQ	27000000
+
+#define PWM_CTRL		0x00
+#define  CTRL_START		BIT(0)
+#define  CTRL_OEB		BIT(1)
+#define  CTRL_FORCE_HIGH	BIT(2)
+#define  CTRL_OPENDRAIN		BIT(3)
+#define  CTRL_CHAN_OFFS		4
+
+#define PWM_CTRL2		0x04
+#define  CTRL2_OUT_SELECT	BIT(0)
+
+#define PWM_CWORD_MSB		0x08
+#define PWM_CWORD_LSB		0x0C
+
+#define PWM_CH_SIZE		0x8
+
+/* Number of bits for the CWORD value */
+#define CWORD_BIT_SIZE		16
+
+/* Maximum control word value allowed when variable-frequency PWM is used as a
+ * clock for the constant-frequency PMW.
+ */
+#define CONST_VAR_F_MAX		32768
+#define CONST_VAR_F_MIN		1
+
+#define PWM_ON			0x18
+#define  PWM_ON_MIN		1
+#define PWM_PERIOD		0x1C
+#define  PWM_PERIOD_MIN		0
+
+#define PWM_ON_PERIOD_MAX	0xff
+
+struct brcmstb_pwm_dev {
+	struct platform_device *pdev;
+	void __iomem *base;
+	struct clk *clk;
+	unsigned long rate;
+	struct pwm_chip chip;
+};
+
+static inline u32 pwm_readl(struct brcmstb_pwm_dev *p, u32 off)
+{
+	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
+		return __raw_readl(p->base + off);
+	else
+		return readl_relaxed(p->base + off);
+}
+
+static inline void pwm_writel(struct brcmstb_pwm_dev *p, u32 val, u32 off)
+{
+	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
+		__raw_writel(val, p->base + off);
+	else
+		writel_relaxed(val, p->base + off);
+}
+
+static inline struct brcmstb_pwm_dev *to_brcmstb_pwm(struct pwm_chip *ch)
+{
+	return container_of(ch, struct brcmstb_pwm_dev, chip);
+}
+
+/* Fv is derived from the variable frequency output. The variable frequency
+ * output is configured using this formula:
+ *
+ * W = cword, if cword < 2 ^ 15 else 16-bit 2's complement of cword
+ *
+ * Fv = W x 2 ^ -16 x 27Mhz (reference clock)
+ *
+ * The period is: (period + 1) / Fv and "on" time is on / (period + 1)
+ *
+ * The PWM core framework specifies that the "duty_ns" parameter is in fact the
+ * "on" time, so this translates directly into our HW programming here.
+ */
+static int brcmstb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+			      int duty_ns, int period_ns)
+{
+	struct brcmstb_pwm_dev *b = to_brcmstb_pwm(chip);
+	unsigned long pc, dc, cword = CONST_VAR_F_MAX;
+	unsigned int ch = pwm->hwpwm;
+	bool done = false;
+	u64 val, rate, div;
+	u32 reg;
+
+	/* If asking for a duty_ns equal to period_ns, we need to substract
+	 * the period value by 1 to make it shorter than the "on" time and
+	 * produce a flat 100% duty cycle signal, and max out the "on" time
+	 */
+	if (duty_ns == period_ns) {
+		dc = PWM_ON_PERIOD_MAX;
+		pc = PWM_ON_PERIOD_MAX - 1;
+		done = true;
+	}
+
+	while (!done) {
+		/* Calculate the base rate from base frequency and current
+		 * cword
+		 */
+		div = NSEC_PER_SEC;
+		rate = (b->rate * (u64)cword);
+		rate = div64_u64(rate, 1 << CWORD_BIT_SIZE);
+
+		val = period_ns * rate;
+		pc = div64_u64(val, div);
+
+		val = (duty_ns + 1) * rate;
+		dc = div64_u64(val, div);
+
+		/* We can be called with separate duty and period updates,
+		 * so do not reject dc == 0 right away
+		 */
+		if (pc == PWM_PERIOD_MIN ||
+		   (dc < PWM_ON_MIN && duty_ns))
+			return -EINVAL;
+
+		/* We converged on a calculation */
+		if (pc <= PWM_ON_PERIOD_MAX && dc <= PWM_ON_PERIOD_MAX)
+			break;
+
+		/* The cword needs to be a power of 2 for the variable
+		 * frequency generator to output a 50% duty cycle variable
+		 * frequency which is used as input clock to the fixed
+		 * frequency generator.
+		 */
+		cword >>= 1;
+
+		/* Desired periods are too large, we do not have a divider
+		 * for them
+		 */
+		if (cword < CONST_VAR_F_MIN)
+			return -EINVAL;
+	}
+
+	/* Configure the defined "cword" value to have the variable frequency
+	 * generator output a base frequency for the constant frequency
+	 * generator to derive from.
+	 */
+	pwm_writel(b, cword >> 8, PWM_CWORD_MSB + ch * PWM_CH_SIZE);
+	pwm_writel(b, cword & 0xff, PWM_CWORD_LSB + ch * PWM_CH_SIZE);
+
+	/* Select constant frequency signal output */
+	reg = pwm_readl(b, PWM_CTRL2);
+	reg |= (CTRL2_OUT_SELECT << (ch * CTRL_CHAN_OFFS));
+	pwm_writel(b, reg, PWM_CTRL2);
+
+	/* Configure on and period value */
+	pwm_writel(b, pc, PWM_PERIOD + ch * PWM_CH_SIZE);
+	pwm_writel(b, dc, PWM_ON + ch * PWM_CH_SIZE);
+
+	return 0;
+}
+
+static inline void brcmstb_pwm_enable_set(struct brcmstb_pwm_dev *b,
+					  unsigned int ch, bool enable)
+{
+	unsigned int ofs = ch * CTRL_CHAN_OFFS;
+	u32 reg;
+
+	reg = pwm_readl(b, PWM_CTRL);
+	if (enable) {
+		reg &= ~(CTRL_OEB << ofs);
+		reg |= ((CTRL_START | CTRL_OPENDRAIN) << ofs);
+	} else {
+		reg &= ~((CTRL_START | CTRL_OPENDRAIN) << ofs);
+		reg |= (CTRL_OEB << ofs);
+	}
+	pwm_writel(b, reg, PWM_CTRL);
+}
+
+static int brcmstb_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct brcmstb_pwm_dev *b = to_brcmstb_pwm(chip);
+
+	brcmstb_pwm_enable_set(b, pwm->hwpwm, true);
+
+	return 0;
+}
+
+static void brcmstb_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct brcmstb_pwm_dev *b = to_brcmstb_pwm(chip);
+
+	brcmstb_pwm_enable_set(b, pwm->hwpwm, false);
+}
+
+static const struct pwm_ops brcmstb_pwm_ops = {
+	.config		= brcmstb_pwm_config,
+	.enable		= brcmstb_pwm_enable,
+	.disable	= brcmstb_pwm_disable,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id brcmstb_pwm_of_match[] = {
+	{ .compatible = "brcm,bcm7038-pwm", .data = (void *)PWM_DEFAULT_FREQ },
+	{ .compatible = "brcm,brcmstb-pwm", .data = (void *)PWM_DEFAULT_FREQ },
+	{ /* sentinel */ }
+};
+
+static int brcmstb_pwm_probe(struct platform_device *pdev)
+{
+	struct device_node *dn = pdev->dev.of_node;
+	const struct of_device_id *of_id;
+	struct brcmstb_pwm_dev *p;
+	struct resource *r;
+	int ret;
+
+	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	of_id = of_match_node(brcmstb_pwm_of_match, dn);
+
+	/* Try to grab the clock and its rate, if not available, default
+	 * to the base 27Mhz clock domain this block comes from.
+	 */
+	p->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(p->clk)) {
+		p->clk = NULL;
+		p->rate = (unsigned long)of_id->data;
+	} else {
+		clk_prepare_enable(p->clk);
+		p->rate = clk_get_rate(p->clk);
+	}
+
+	platform_set_drvdata(pdev, p);
+
+	p->pdev = pdev;
+	p->chip.dev = &pdev->dev;
+	p->chip.ops = &brcmstb_pwm_ops;
+	/* Dynamically assign a PWM base */
+	p->chip.base = -1;
+	/* Static number of PWM channels for this controller */
+	p->chip.npwm = NUM_PWM_CHAN;
+	p->chip.of_xlate = of_pwm_xlate_with_flags;
+	p->chip.of_pwm_n_cells = 2;
+	p->chip.can_sleep = true;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	p->base = devm_request_and_ioremap(&pdev->dev, r);
+	if (!p->base)
+		return -ENOMEM;
+
+	ret = pwmchip_add(&p->chip);
+	if (ret)
+		dev_err(&pdev->dev, "failed to add PWM chip %d\n", ret);
+	else
+		dev_info(&pdev->dev, "PWM driver %d channels\n", p->chip.npwm);
+
+	return ret;
+}
+
+static int brcmstb_pwm_remove(struct platform_device *pdev)
+{
+	struct brcmstb_pwm_dev *p = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(p->clk);
+
+	return pwmchip_remove(&p->chip);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int brcmstb_pwm_suspend(struct device *d)
+{
+	return 0;
+}
+
+static int brcmstb_pwm_resume(struct device *d)
+{
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(brcmstb_pwm_pm_ops,
+			 brcmstb_pwm_suspend, brcmstb_pwm_resume);
+
+static struct platform_driver brcmstb_pwm_driver = {
+	.probe	= brcmstb_pwm_probe,
+	.remove	= brcmstb_pwm_remove,
+	.driver	= {
+		.name	= "pwm-brcmstb",
+		.owner	= THIS_MODULE,
+		.of_match_table = brcmstb_pwm_of_match,
+		.pm	= &brcmstb_pwm_pm_ops,
+	},
+};
+module_platform_driver(brcmstb_pwm_driver);
+
+MODULE_AUTHOR("Broadcom Corporation");
+MODULE_DESCRIPTION("Broadcom STB PWM driver");
+MODULE_ALIAS("platform:pwm-brcmstb");
+MODULE_LICENSE("GPL");
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists