| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 4 Sep 2015 09:16:44 +0800
From: Wanpeng Li <wanpeng.li@...mail.com>
To: David Matlack <dmatlack@...gle.com>
CC: Paolo Bonzini <pbonzini@...hat.com>,
kvm list <kvm@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v6 2/3] KVM: dynamic halt_poll_ns adjustment
On 9/3/15 2:09 AM, David Matlack wrote:
> On Wed, Sep 2, 2015 at 12:29 AM, Wanpeng Li <wanpeng.li@...mail.com> wrote:
>> There is a downside of always-poll since poll is still happened for idle
>> vCPUs which can waste cpu usage. This patch adds the ability to adjust
>> halt_poll_ns dynamically, to grow halt_poll_ns when shot halt is detected,
>> and to shrink halt_poll_ns when long halt is detected.
>>
>> There are two new kernel parameters for changing the halt_poll_ns:
>> halt_poll_ns_grow and halt_poll_ns_shrink.
>>
>> no-poll always-poll dynamic-poll
>> -----------------------------------------------------------------------
>> Idle (nohz) vCPU %c0 0.15% 0.3% 0.2%
>> Idle (250HZ) vCPU %c0 1.1% 4.6%~14% 1.2%
>> TCP_RR latency 34us 27us 26.7us
>>
>> "Idle (X) vCPU %c0" is the percent of time the physical cpu spent in
>> c0 over 60 seconds (each vCPU is pinned to a pCPU). (nohz) means the
>> guest was tickless. (250HZ) means the guest was ticking at 250HZ.
>>
>> The big win is with ticking operating systems. Running the linux guest
>> with nohz=off (and HZ=250), we save 3.4%~12.8% CPUs/second and get close
>> to no-polling overhead levels by using the dynamic-poll. The savings
>> should be even higher for higher frequency ticks.
>>
>> Suggested-by: David Matlack <dmatlack@...gle.com>
>> Signed-off-by: Wanpeng Li <wanpeng.li@...mail.com>
>> ---
>> virt/kvm/kvm_main.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++++++---
>> 1 file changed, 58 insertions(+), 3 deletions(-)
>>
>> diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
>> index c06e57c..3cff02f 100644
>> --- a/virt/kvm/kvm_main.c
>> +++ b/virt/kvm/kvm_main.c
>> @@ -66,9 +66,18 @@
>> MODULE_AUTHOR("Qumranet");
>> MODULE_LICENSE("GPL");
>>
>> -static unsigned int halt_poll_ns;
>> +/* halt polling only reduces halt latency by 5-7 us, 500us is enough */
>> +static unsigned int halt_poll_ns = 500000;
>> module_param(halt_poll_ns, uint, S_IRUGO | S_IWUSR);
>>
>> +/* Default doubles per-vcpu halt_poll_ns. */
>> +static unsigned int halt_poll_ns_grow = 2;
>> +module_param(halt_poll_ns_grow, int, S_IRUGO);
>> +
>> +/* Default resets per-vcpu halt_poll_ns . */
>> +static unsigned int halt_poll_ns_shrink;
>> +module_param(halt_poll_ns_shrink, int, S_IRUGO);
>> +
>> /*
>> * Ordering of locks:
>> *
>> @@ -1907,6 +1916,31 @@ void kvm_vcpu_mark_page_dirty(struct kvm_vcpu *vcpu, gfn_t gfn)
>> }
>> EXPORT_SYMBOL_GPL(kvm_vcpu_mark_page_dirty);
>>
>> +static void grow_halt_poll_ns(struct kvm_vcpu *vcpu)
>> +{
>> + int val = vcpu->halt_poll_ns;
>> +
>> + /* 10us base */
>> + if (val == 0 && halt_poll_ns_grow)
>> + val = 10000;
>> + else
>> + val *= halt_poll_ns_grow;
>> +
>> + vcpu->halt_poll_ns = val;
>> +}
>> +
>> +static void shrink_halt_poll_ns(struct kvm_vcpu *vcpu)
>> +{
>> + int val = vcpu->halt_poll_ns;
>> +
>> + if (halt_poll_ns_shrink == 0)
>> + val = 0;
>> + else
>> + val /= halt_poll_ns_shrink;
>> +
>> + vcpu->halt_poll_ns = val;
>> +}
>> +
>> static int kvm_vcpu_check_block(struct kvm_vcpu *vcpu)
>> {
>> if (kvm_arch_vcpu_runnable(vcpu)) {
>> @@ -1929,6 +1963,7 @@ void kvm_vcpu_block(struct kvm_vcpu *vcpu)
>> ktime_t start, cur;
>> DEFINE_WAIT(wait);
>> bool waited = false;
>> + u64 poll_ns = 0, wait_ns = 0, block_ns = 0;
>>
>> start = cur = ktime_get();
>> if (vcpu->halt_poll_ns) {
>> @@ -1941,10 +1976,15 @@ void kvm_vcpu_block(struct kvm_vcpu *vcpu)
>> */
>> if (kvm_vcpu_check_block(vcpu) < 0) {
>> ++vcpu->stat.halt_successful_poll;
>> - goto out;
>> + break;
>> }
>> cur = ktime_get();
>> } while (single_task_running() && ktime_before(cur, stop));
>> +
>> + if (ktime_before(cur, stop)) {
> You can't use 'cur' to tell if the interrupt arrived. single_task_running()
> can break us out of the loop before 'stop'.
>
>> + poll_ns = ktime_to_ns(cur) - ktime_to_ns(start);
> Put this line before the if(). block_ns should always include the time
> spent polling; even if polling does not succeed.
Ah, I remember why I keep poll_ns calculation in if(). Actually poll_ns
has already been accumulated into wait_ns(see how wait_ns is calculated)
if polling does not succeed. If put poll_ns calculation before if() I
need to reset variable 'start' to ktime_get().
Regards,
Wanpeng Li
>
>> + goto out;
>> + }
>> }
>>
>> for (;;) {
>> @@ -1959,9 +1999,24 @@ void kvm_vcpu_block(struct kvm_vcpu *vcpu)
>>
>> finish_wait(&vcpu->wq, &wait);
>> cur = ktime_get();
>> + wait_ns = ktime_to_ns(cur) - ktime_to_ns(start);
>>
>> out:
>> - trace_kvm_vcpu_wakeup(ktime_to_ns(cur) - ktime_to_ns(start), waited);
>> + block_ns = poll_ns + wait_ns;
>> +
>> + if (halt_poll_ns) {
> If you want, you can leave this if() out and save some indentation.
>
>> + if (block_ns <= vcpu->halt_poll_ns)
>> + ;
>> + /* we had a long block, shrink polling */
>> + else if (vcpu->halt_poll_ns && block_ns > halt_poll_ns)
>> + shrink_halt_poll_ns(vcpu);
>> + /* we had a short halt and our poll time is too small */
>> + else if (vcpu->halt_poll_ns < halt_poll_ns &&
>> + block_ns < halt_poll_ns)
>> + grow_halt_poll_ns(vcpu);
>> + }
>> +
>> + trace_kvm_vcpu_wakeup(block_ns, waited);
>> }
>> EXPORT_SYMBOL_GPL(kvm_vcpu_block);
>>
>> --
>> 1.9.1
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists