| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 9 Sep 2015 14:59:07 +0100
From: Jon Hunter <jonathanh@...dia.com>
To: Ulf Hansson <ulf.hansson@...aro.org>
CC: Olof Johansson <olof@...om.net>,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Grant Grundler <grundler@...gle.com>,
"Olof Johansson" <olofj@...omium.org>,
Seshagiri Holi <sholi@...dia.com>
Subject: Re: [RFC PATCH] mmc: block: Add new ioctl to send combo commands
Hi Ulf,
On 09/09/15 13:42, Ulf Hansson wrote:
> On 3 September 2015 at 17:08, Jon Hunter <jonathanh@...dia.com> wrote:
>> Hi Olof,
>>
>> On 02/09/15 19:28, Olof Johansson wrote:
>>> Hi,
>>>
>>> On Wed, Sep 2, 2015 at 7:21 AM, Jon Hunter <jonathanh@...dia.com> wrote:
>>>> From: Seshagiri Holi <sholi@...dia.com>
>>>>
>>>> Certain eMMC devices allow vendor specific device information to be read
>>>> via a sequence of vendor commands. These vendor commands must be issued
>>>> in sequence and an atomic fashion. One way to support this would be to
>>>> add an ioctl function for sending a sequence of commands to the device
>>>> atomically as proposed here. These combo commands are simple array of
>>>> the existing mmc_ioc_cmd structure.
>>>
>>> This seems reasonable to me, being able to do a sequence of
>>> back-to-back operations without system read/writes slipping through.
>
> I agree, this change seems reasonable!
>
> Perhaps, from clarification point of view, we should change from
> naming it "combo" commands to *sequence* of commands. Both in the code
> and in the change log, please.
No problem. Sorry to bike-shed, but do you prefer sequence or multi? I
was thinking multi could be shorter for the code.
>>>
>>>> diff --git a/include/uapi/linux/mmc/ioctl.h b/include/uapi/linux/mmc/ioctl.h
>>>> index 1f5e68923929..5943e51f22b3 100644
>>>> --- a/include/uapi/linux/mmc/ioctl.h
>>>> +++ b/include/uapi/linux/mmc/ioctl.h
>>>> @@ -45,8 +45,23 @@ struct mmc_ioc_cmd {
>>>> };
>>>> #define mmc_ioc_cmd_set_data(ic, ptr) ic.data_ptr = (__u64)(unsigned long) ptr
>>>>
>>>> -#define MMC_IOC_CMD _IOWR(MMC_BLOCK_MAJOR, 0, struct mmc_ioc_cmd)
>>>> +/**
>>>> + * struct mmc_ioc_combo_cmd - combo command information
>>>> + * @num_of_cmds: number of commands to send
>>>> + * @mmc_ioc_cmd_list: pointer to list of commands
>>>> + */
>>>> +struct mmc_ioc_combo_cmd {
>>>> + uint8_t num_of_cmds;
>>>> + struct mmc_ioc_cmd *mmc_ioc_cmd_list;
>>>> +};
>>>
>>> The size of this struct will depend on the pointer size of userspace.
>>>
>>> It might be better to use a u64 for the pointer instead. Otherwise
>>> you'd need a compat ioctl wrapper to copy a 32-bit pointer over on a
>>> 64-bit kernel.
>>
>> Oh, good point. I have made this change today. I have also tested
>> this now with a hacked version of mmc-utils to send a couple status
>> commands back-to-back. I have tested on -next with ARM32 and on
>> ARM64 with an older 3.18 kernel (due to lack of mmc support in the
>> mainline for my ARM64 board) and seems to be working fine. Here is
>> an updated version ...
>>
>> Jon
>>
>> From fe5849a0d91ebbcfd092c74696f3fa7d7de3a156 Mon Sep 17 00:00:00 2001
>> From: Seshagiri Holi <sholi@...dia.com>
>> Date: Mon, 4 Nov 2013 17:27:43 +0530
>> Subject: [PATCH] mmc: block: Add new ioctl to send combo commands
>>
>> Certain eMMC devices allow vendor specific device information to be read
>> via a sequence of vendor commands. These vendor commands must be issued
>> in sequence and an atomic fashion. One way to support this would be to
>> add an ioctl function for sending a sequence of commands to the device
>> atomically as proposed here. These combo commands are simple array of
>> the existing mmc_ioc_cmd structure.
>>
>> Signed-off-by: Seshagiri Holi <sholi@...dia.com>
>> [ jonathanh@...dia.com: Rebased on linux-next from v3.18. Changed
>> userspace pointer type for combo command to be a u64. Updated
>> commit message ]
>> Signed-off-by: Jon Hunter <jonathanh@...dia.com>
>> ---
>> drivers/mmc/card/block.c | 199 ++++++++++++++++++++++++++++++++---------
>> include/uapi/linux/mmc/ioctl.h | 17 +++-
>> 2 files changed, 171 insertions(+), 45 deletions(-)
>>
>> diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
>> index c742cfd7674e..0423d95ea020 100644
>> --- a/drivers/mmc/card/block.c
>> +++ b/drivers/mmc/card/block.c
>> @@ -387,6 +387,22 @@ out:
>> return ERR_PTR(err);
>> }
>>
>> +static int mmc_blk_ioctl_copy_to_user(struct mmc_ioc_cmd __user *ic_ptr,
>> + struct mmc_blk_ioc_data *idata)
>> +{
>> + if (copy_to_user(&(ic_ptr->response), idata->ic.response,
>> + sizeof(idata->ic.response)))
>> + return -EFAULT;
>> +
>> + if (!idata->ic.write_flag) {
>> + if (copy_to_user((void __user *)(unsigned long)idata->ic.data_ptr,
>> + idata->buf, idata->buf_bytes))
>> + return -EFAULT;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> static int ioctl_rpmb_card_status_poll(struct mmc_card *card, u32 *status,
>> u32 retries_max)
>> {
>> @@ -447,12 +463,9 @@ out:
>> return err;
>> }
>>
>> -static int mmc_blk_ioctl_cmd(struct block_device *bdev,
>> - struct mmc_ioc_cmd __user *ic_ptr)
>> +static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
>> + struct mmc_blk_ioc_data *idata)
>> {
>> - struct mmc_blk_ioc_data *idata;
>> - struct mmc_blk_data *md;
>> - struct mmc_card *card;
>> struct mmc_command cmd = {0};
>> struct mmc_data data = {0};
>> struct mmc_request mrq = {NULL};
>> @@ -461,33 +474,12 @@ static int mmc_blk_ioctl_cmd(struct block_device *bdev,
>> int is_rpmb = false;
>> u32 status = 0;
>>
>> - /*
>> - * The caller must have CAP_SYS_RAWIO, and must be calling this on the
>> - * whole block device, not on a partition. This prevents overspray
>> - * between sibling partitions.
>> - */
>> - if ((!capable(CAP_SYS_RAWIO)) || (bdev != bdev->bd_contains))
>> - return -EPERM;
>> -
>> - idata = mmc_blk_ioctl_copy_from_user(ic_ptr);
>> - if (IS_ERR(idata))
>> - return PTR_ERR(idata);
>> -
>> - md = mmc_blk_get(bdev->bd_disk);
>> - if (!md) {
>> - err = -EINVAL;
>> - goto cmd_err;
>> - }
>> + if (!card || !md || !idata)
>> + return -EINVAL;
>>
>> if (md->area_type & MMC_BLK_DATA_AREA_RPMB)
>> is_rpmb = true;
>>
>> - card = md->queue.card;
>> - if (IS_ERR(card)) {
>> - err = PTR_ERR(card);
>> - goto cmd_done;
>> - }
>> -
>> cmd.opcode = idata->ic.opcode;
>> cmd.arg = idata->ic.arg;
>> cmd.flags = idata->ic.flags;
>> @@ -582,18 +574,7 @@ static int mmc_blk_ioctl_cmd(struct block_device *bdev,
>> if (idata->ic.postsleep_min_us)
>> usleep_range(idata->ic.postsleep_min_us, idata->ic.postsleep_max_us);
>>
>> - if (copy_to_user(&(ic_ptr->response), cmd.resp, sizeof(cmd.resp))) {
>> - err = -EFAULT;
>> - goto cmd_rel_host;
>> - }
>> -
>> - if (!idata->ic.write_flag) {
>> - if (copy_to_user((void __user *)(unsigned long) idata->ic.data_ptr,
>> - idata->buf, idata->buf_bytes)) {
>> - err = -EFAULT;
>> - goto cmd_rel_host;
>> - }
>> - }
>> + memcpy(&(idata->ic.response), cmd.resp, sizeof(cmd.resp));
>>
>> if (is_rpmb) {
>> /*
>> @@ -609,6 +590,48 @@ static int mmc_blk_ioctl_cmd(struct block_device *bdev,
>>
>> cmd_rel_host:
>> mmc_put_card(card);
>> + return err;
>> +}
>> +
>> +static int mmc_blk_ioctl_cmd(struct block_device *bdev,
>> + struct mmc_ioc_cmd __user *ic_ptr)
>> +{
>> + struct mmc_blk_ioc_data *idata;
>> + struct mmc_blk_data *md;
>> + struct mmc_card *card;
>> + int err;
>> +
>> + /*
>> + * The caller must have CAP_SYS_RAWIO, and must be calling this on the
>> + * whole block device, not on a partition. This prevents overspray
>> + * between sibling partitions.
>> + */
>> + if ((!capable(CAP_SYS_RAWIO)) || (bdev != bdev->bd_contains))
>> + return -EPERM;
>> +
>> + idata = mmc_blk_ioctl_copy_from_user(ic_ptr);
>> + if (IS_ERR(idata))
>> + return PTR_ERR(idata);
>> +
>> + md = mmc_blk_get(bdev->bd_disk);
>> + if (!md) {
>> + err = -EINVAL;
>> + goto cmd_err;
>> + }
>> +
>> + card = md->queue.card;
>> + if (IS_ERR(card)) {
>> + err = PTR_ERR(card);
>> + goto cmd_done;
>> + }
>> +
>> + mmc_claim_host(card->host);
>
> As __mmc_blk_ioctl_cmd() already does mmc_get_card(), you don't need
> mmc_claim_host() here.
Ok.
>> +
>> + err = __mmc_blk_ioctl_cmd(card, md, idata);
>> +
>> + mmc_release_host(card->host);
>
> As __mmc_blk_ioctl_cmd() already does mmc_put_card(), you don't need
> mmc_release_host() here.
Ok.
>> +
>> + err = mmc_blk_ioctl_copy_to_user(ic_ptr, idata);
>>
>> cmd_done:
>> mmc_blk_put(md);
>> @@ -618,13 +641,101 @@ cmd_err:
>> return err;
>> }
>>
>> +static int mmc_blk_ioctl_combo_cmd(struct block_device *bdev,
>> + struct mmc_ioc_combo_cmd __user *user)
>> +{
>> + struct mmc_ioc_combo_cmd mcci = {0};
>> + struct mmc_blk_ioc_data **ioc_data = NULL;
>> + struct mmc_ioc_cmd __user *usr_ptr;
>> + struct mmc_card *card;
>> + struct mmc_blk_data *md;
>> + int i, err = -EFAULT;
>> + u8 n_cmds = 0;
>> +
>> + /*
>> + * The caller must have CAP_SYS_RAWIO, and must be calling this on the
>> + * whole block device, not on a partition. This prevents overspray
>> + * between sibling partitions.
>> + */
>> + if ((!capable(CAP_SYS_RAWIO)) || (bdev != bdev->bd_contains))
>> + return -EPERM;
>> +
>> + if (copy_from_user(&mcci, user, sizeof(struct mmc_ioc_combo_cmd)))
>> + return -EFAULT;
>> +
>> + if (!mcci.num_of_cmds) {
>> + err = -EINVAL;
>> + goto cmd_err;
>> + }
>> +
>> + ioc_data = kcalloc(mcci.num_of_cmds, sizeof(*ioc_data), GFP_KERNEL);
>> + if (!ioc_data) {
>> + err = -ENOMEM;
>> + goto cmd_err;
>> + }
>> +
>> + usr_ptr = (void * __user)(unsigned long)mcci.cmds_ptr;
>> + for (n_cmds = 0; n_cmds < mcci.num_of_cmds; n_cmds++) {
>> + ioc_data[n_cmds] =
>> + mmc_blk_ioctl_copy_from_user(&usr_ptr[n_cmds]);
>> + if (IS_ERR(ioc_data[n_cmds])) {
>> + err = PTR_ERR(ioc_data[n_cmds]);
>> + goto cmd_err;
>> + }
>> + }
>> +
>> + md = mmc_blk_get(bdev->bd_disk);
>> + if (!md)
>> + goto cmd_err;
>> +
>> + card = md->queue.card;
>> + if (IS_ERR(card)) {
>> + err = PTR_ERR(card);
>> + goto cmd_done;
>> + }
>> +
>> + mmc_claim_host(card->host);
>
> Change to mmc_get_card().
>
>> + for (i = 0; i < n_cmds; i++) {
>> + err = __mmc_blk_ioctl_cmd(card, md, ioc_data[i]);
>> + if (err) {
>> + mmc_release_host(card->host);
>> + goto cmd_done;
>> + }
>> + }
>> +
>> + mmc_release_host(card->host);
>
> Change to mmc_put_card().
>
>> +
>> + /* copy to user if data and response */
>> + for (i = 0; i < n_cmds; i++) {
>> + err = mmc_blk_ioctl_copy_to_user(&usr_ptr[i], ioc_data[i]);
>> + if (err)
>> + break;
>> + }
>> +
>> +cmd_done:
>> + mmc_blk_put(md);
>> +cmd_err:
>> + for (i = 0; i < n_cmds; i++) {
>> + kfree(ioc_data[i]->buf);
>> + kfree(ioc_data[i]);
>> + }
>> + kfree(ioc_data);
>> + return err;
>> +}
>> +
>> static int mmc_blk_ioctl(struct block_device *bdev, fmode_t mode,
>> unsigned int cmd, unsigned long arg)
>> {
>> - int ret = -EINVAL;
>> - if (cmd == MMC_IOC_CMD)
>> - ret = mmc_blk_ioctl_cmd(bdev, (struct mmc_ioc_cmd __user *)arg);
>> - return ret;
>> + switch (cmd) {
>> + case MMC_IOC_CMD:
>> + return mmc_blk_ioctl_cmd(bdev,
>> + (struct mmc_ioc_cmd __user *)arg);
>> + case MMC_IOC_COMBO_CMD:
>> + return mmc_blk_ioctl_combo_cmd(bdev,
>> + (struct mmc_ioc_combo_cmd __user *)arg);
>> + default:
>> + return -EINVAL;
>> + }
>> }
>>
>> #ifdef CONFIG_COMPAT
>
> Don't forget to build with this configuration as well, I don't think
> you have. :-)
Yes will do.
>> diff --git a/include/uapi/linux/mmc/ioctl.h b/include/uapi/linux/mmc/ioctl.h
>> index 1f5e68923929..593e665177e2 100644
>> --- a/include/uapi/linux/mmc/ioctl.h
>> +++ b/include/uapi/linux/mmc/ioctl.h
>> @@ -45,8 +45,23 @@ struct mmc_ioc_cmd {
>> };
>> #define mmc_ioc_cmd_set_data(ic, ptr) ic.data_ptr = (__u64)(unsigned long) ptr
>>
>> -#define MMC_IOC_CMD _IOWR(MMC_BLOCK_MAJOR, 0, struct mmc_ioc_cmd)
>> +/**
>> + * struct mmc_ioc_combo_cmd - combo command information
>> + * @cmds_ptr: Address of the location where the list of commands resides
>> + * @num_of_cmds: number of commands to send
>> + */
>> +struct mmc_ioc_combo_cmd {
>> + __u64 cmds_ptr;
>> + uint8_t num_of_cmds;
>> +};
>>
>> +#define MMC_IOC_CMD _IOWR(MMC_BLOCK_MAJOR, 0, struct mmc_ioc_cmd)
>> +/*
>> + * MMC_COMBO_IOC_CMD: Used to send an array of MMC commands described by
>> + * the structure mmc_ioc_combo_cmd. The MMC driver will issue all
>> + * commands in array in sequence to card.
>> + */
>> +#define MMC_IOC_COMBO_CMD _IOWR(MMC_BLOCK_MAJOR, 1, struct mmc_ioc_combo_cmd)
>> /*
>> * Since this ioctl is only meant to enhance (and not replace) normal access
>> * to the mmc bus device, an upper data transfer limit of MMC_IOC_MAX_BYTES
>> --
>> 2.1.4
>>
>
> Kind regards
> Uffe
Cheers
Jon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists