linux-kernel - [PATCH 3/3] ARM: dts: vf610: add remaining SAI instaces

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Sat, 17 Oct 2015 21:05:22 -0700
From:	Stefan Agner <stefan@...er.ch>
To:	shawnguo@...nel.org, kernel@...gutronix.de,
	mturquette@...libre.com, sboyd@...eaurora.org
Cc:	galak@...eaurora.org, ijc+devicetree@...lion.org.uk,
	mark.rutland@....com, pawel.moll@....com, robh+dt@...nel.org,
	Li.Xiubo@...escale.com, zidan.wang@...escale.com,
	linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
	linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
	Stefan Agner <stefan@...er.ch>
Subject: [PATCH 3/3] ARM: dts: vf610: add remaining SAI instaces

This adds the remaining SAI instances SAI0, SAI1 and SAI3. All
instances are very similar, except that the DMA channel of SAI3
is available on MUX1 (compared to MUX0 for SAI0-SAI2). Also,
SAI3 has a slightly different memory map due to a deeper FIFO,
however in practice the current driver works for SAI3 fine.

Signed-off-by: Stefan Agner <stefan@...er.ch>
---
 arch/arm/boot/dts/vfxxx.dtsi | 42 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index c2a4d1c..b45bc81 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -174,6 +174,34 @@
 				status = "disabled";
 			};
 
+			sai0: sai@...2f000 {
+				compatible = "fsl,vf610-sai";
+				reg = <0x4002f000 0x1000>;
+				interrupts = <84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_SAI0>,
+					<&clks VF610_CLK_SAI0_DIV>,
+					<&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "tx", "rx";
+				dmas = <&edma0 0 17>,
+					<&edma0 0 16>;
+				status = "disabled";
+			};
+
+			sai1: sai@...30000 {
+				compatible = "fsl,vf610-sai";
+				reg = <0x40030000 0x1000>;
+				interrupts = <85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_SAI1>,
+					<&clks VF610_CLK_SAI1_DIV>,
+					<&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "tx", "rx";
+				dmas = <&edma0 0 19>,
+					<&edma0 0 18>;
+				status = "disabled";
+			};
+
 			sai2: sai@...31000 {
 				compatible = "fsl,vf610-sai";
 				reg = <0x40031000 0x1000>;
@@ -188,6 +216,20 @@
 				status = "disabled";
 			};
 
+			sai3: sai@...32000 {
+				compatible = "fsl,vf610-sai";
+				reg = <0x40032000 0x1000>;
+				interrupts = <87 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_SAI3>,
+					<&clks VF610_CLK_SAI3_DIV>,
+					<&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "tx", "rx";
+				dmas = <&edma0 1 9>,
+					<&edma0 1 8>;
+				status = "disabled";
+			};
+
 			pit: pit@...37000 {
 				compatible = "fsl,vf610-pit";
 				reg = <0x40037000 0x1000>;
-- 
2.6.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/