lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list] 
Date:	Wed, 4 Nov 2015 10:55:38 +0200
From:	Riku Voipio <riku.voipio@...aro.org>
To:	Alison Wang <b18965@...escale.com>
Cc:	shawnguo@...nel.org, linux@....linux.org.uk, festevam@...il.com,
	Arnd Bergmann <arnd@...db.de>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>,
	LKML <linux-kernel@...r.kernel.org>, jason.jin@...escale.com,
	Alison Wang <alison.wang@...escale.com>,
	Christoffer Dall <christoffer.dall@...aro.org>
Subject: Re: [PATCH] ARM: add v7 LPAE multi-platform defconfig

On 27 October 2015 at 16:35, Alison Wang <b18965@...escale.com> wrote:
> v7 LPAE multi-platform defconfig is based on v7 multi-platform
> defconfig and adds LPAE support.
>
> This defconfig is verified on LS1021A which enables GIANFAR,
> I2C, WATCHDOG, AUDIO, EDMA and DSPI drivers, etc.
>
> Signed-off-by: Alison Wang <alison.wang@...escale.com>
> ---
>  arch/arm/configs/multi_v7_lpae_defconfig | 168 +++++++++++++++++++++++++++++++
>  1 file changed, 168 insertions(+)
>  create mode 100644 arch/arm/configs/multi_v7_lpae_defconfig
>
> diff --git a/arch/arm/configs/multi_v7_lpae_defconfig b/arch/arm/configs/multi_v7_lpae_defconfig
> new file mode 100644
> index 0000000..65876d0
> --- /dev/null
> +++ b/arch/arm/configs/multi_v7_lpae_defconfig
> @@ -0,0 +1,168 @@
> +CONFIG_SYSVIPC=y
> +CONFIG_FHANDLE=y
> +CONFIG_IRQ_DOMAIN_DEBUG=y
> +CONFIG_NO_HZ=y
> +CONFIG_HIGH_RES_TIMERS=y
> +CONFIG_CGROUPS=y
> +CONFIG_BLK_DEV_INITRD=y
> +CONFIG_EMBEDDED=y
> +CONFIG_PERF_EVENTS=y
> +CONFIG_MODULES=y
> +CONFIG_MODULE_UNLOAD=y
> +CONFIG_PARTITION_ADVANCED=y
> +CONFIG_CMDLINE_PARTITION=y
> +CONFIG_ARCH_MXC=y
> +CONFIG_SOC_LS1021A=y

Only one platform supported in "multi_v7" config?

looking at at kernelci boots with CONFIG_LPAE=y:

http://kernelci.org/build/mainline/kernel/v4.3/defconfig/multi_v7_defconfig+CONFIG_ARM_LPAE=y/?_id=5636b71c59b5145a2d3af14a

At least MVEBU, EXYNOS5, HISI, OMAP5, SUNXI, TEGRA and VEXPRESS need
to be enabled. Also all drivers needed to boot these platforms.
Perhaps the better approach would be to start with multi_v7_defconfig
and remove each ARCH/MACH that doesn't have an LPAE capable CPU in th
family.

> +CONFIG_ARM_LPAE=y
> +CONFIG_PCI=y
> +CONFIG_PCI_MSI=y
> +CONFIG_PCI_HOST_GENERIC=y
> +CONFIG_PCI_LAYERSCAPE=y
> +CONFIG_PCIEPORTBUS=y
> +CONFIG_SMP=y
> +CONFIG_NR_CPUS=16
> +CONFIG_ARM_PSCI=y
> +CONFIG_AEABI=y
> +CONFIG_HIGHMEM=y
> +CONFIG_CMA=y
> +CONFIG_ARM_APPENDED_DTB=y
> +CONFIG_ARM_ATAG_DTB_COMPAT=y
> +CONFIG_KEXEC=y
> +CONFIG_CPU_FREQ=y
> +CONFIG_CPU_FREQ_STAT_DETAILS=y
> +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
> +CONFIG_CPUFREQ_DT=y
> +CONFIG_CPU_IDLE=y
> +CONFIG_ARM_CPUIDLE=y
> +CONFIG_VFP=y
> +CONFIG_NEON=y
> +CONFIG_KERNEL_MODE_NEON=y
> +CONFIG_NET=y
> +CONFIG_PACKET=y
> +CONFIG_UNIX=y
> +CONFIG_INET=y
> +CONFIG_IP_PNP=y
> +CONFIG_IP_PNP_DHCP=y
> +CONFIG_IP_PNP_BOOTP=y
> +CONFIG_IP_PNP_RARP=y
> +CONFIG_IPV6_ROUTER_PREF=y
> +CONFIG_IPV6_OPTIMISTIC_DAD=y
> +CONFIG_INET6_AH=m
> +CONFIG_INET6_ESP=m
> +CONFIG_INET6_IPCOMP=m
> +CONFIG_IPV6_MIP6=m
> +CONFIG_IPV6_TUNNEL=m
> +CONFIG_IPV6_MULTIPLE_TABLES=y
> +CONFIG_CAN=y
> +CONFIG_CAN_FLEXCAN=y
> +CONFIG_DEVTMPFS=y
> +CONFIG_DEVTMPFS_MOUNT=y
> +CONFIG_MTD=y
> +CONFIG_MTD_CMDLINE_PARTS=y
> +CONFIG_MTD_BLOCK=y
> +CONFIG_MTD_CFI=y
> +CONFIG_MTD_CFI_ADV_OPTIONS=y
> +CONFIG_MTD_CFI_BE_BYTE_SWAP=y
> +CONFIG_MTD_CFI_GEOMETRY=y
> +CONFIG_MTD_CFI_INTELEXT=y
> +CONFIG_MTD_CFI_AMDSTD=y
> +CONFIG_MTD_CFI_STAA=y
> +CONFIG_MTD_PHYSMAP_OF=y
> +CONFIG_MTD_DATAFLASH=y
> +CONFIG_MTD_M25P80=y
> +CONFIG_MTD_SST25L=y
> +CONFIG_MTD_NAND=y
> +CONFIG_MTD_SPI_NOR=y
> +CONFIG_SPI_FSL_QUADSPI=y
> +CONFIG_BLK_DEV_LOOP=y
> +CONFIG_BLK_DEV_RAM=y
> +CONFIG_BLK_DEV_RAM_SIZE=256000
> +CONFIG_BLK_DEV_SD=y
> +CONFIG_BLK_DEV_SR=y
> +CONFIG_ATA=y
> +CONFIG_SATA_AHCI=y
> +CONFIG_SATA_AHCI_PLATFORM=y
> +CONFIG_SATA_SIL24=y
> +CONFIG_NETDEVICES=y
> +CONFIG_MACB=y
> +CONFIG_GIANFAR=y
> +CONFIG_E1000E=y
> +CONFIG_AT803X_PHY=y
> +CONFIG_MARVELL_PHY=y
> +CONFIG_VITESSE_PHY=y
> +CONFIG_SMSC_PHY=y
> +CONFIG_BROADCOM_PHY=y
> +CONFIG_REALTEK_PHY=y
> +CONFIG_NATIONAL_PHY=y
> +CONFIG_MICREL_PHY=y
> +CONFIG_FIXED_PHY=y
> +CONFIG_SERIAL_8250=y
> +CONFIG_SERIAL_8250_CONSOLE=y
> +CONFIG_SERIAL_OF_PLATFORM=y
> +CONFIG_SERIAL_FSL_LPUART=y
> +CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
> +CONFIG_I2C_IMX=y
> +CONFIG_SPI=y
> +CONFIG_SPI_FSL_DSPI=y
> +CONFIG_WATCHDOG=y
> +CONFIG_IMX2_WDT=y
> +CONFIG_REGULATOR=y
> +CONFIG_REGULATOR_FIXED_VOLTAGE=y
> +CONFIG_DRM=y
> +CONFIG_DRM_FSL_DCU=y
> +CONFIG_DRM_PANEL_SIMPLE=y
> +CONFIG_FRAMEBUFFER_CONSOLE=y
> +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
> +CONFIG_LOGO=y
> +CONFIG_SOUND=y
> +CONFIG_SND=y
> +CONFIG_SND_DYNAMIC_MINORS=y
> +CONFIG_SND_SOC=y
> +CONFIG_SND_SOC_FSL_SAI=y
> +CONFIG_SND_SOC_SGTL5000=y
> +CONFIG_SND_SIMPLE_CARD=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_STORAGE=y
> +CONFIG_USB_DWC3=y
> +CONFIG_MMC=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_PLTFM=y
> +CONFIG_MMC_SDHCI_OF_ESDHC=y
> +CONFIG_RTC_CLASS=y
> +CONFIG_DMADEVICES=y
> +CONFIG_FSL_EDMA=y
> +CONFIG_CLK_QORIQ=y
> +CONFIG_MEMORY=y
> +CONFIG_PWM=y
> +CONFIG_PWM_FSL_FTM=y
> +CONFIG_GENERIC_PHY=y
> +CONFIG_EXT4_FS=y
> +CONFIG_AUTOFS4_FS=y
> +CONFIG_MSDOS_FS=y
> +CONFIG_VFAT_FS=y
> +CONFIG_NTFS_FS=y
> +CONFIG_TMPFS=y
> +CONFIG_TMPFS_POSIX_ACL=y
> +CONFIG_SQUASHFS=y
> +CONFIG_SQUASHFS_LZO=y
> +CONFIG_SQUASHFS_XZ=y
> +CONFIG_NFS_FS=y
> +CONFIG_NFS_V3_ACL=y
> +CONFIG_NFS_V4=y
> +CONFIG_ROOT_NFS=y
> +CONFIG_NLS_CODEPAGE_437=y
> +CONFIG_NLS_ISO8859_1=y
> +CONFIG_NLS_UTF8=y
> +CONFIG_PRINTK_TIME=y
> +CONFIG_DEBUG_FS=y
> +CONFIG_MAGIC_SYSRQ=y
> +CONFIG_LOCKUP_DETECTOR=y
> +CONFIG_ARM_CRYPTO=y
> +CONFIG_CRYPTO_SHA1_ARM_NEON=m
> +CONFIG_CRYPTO_SHA1_ARM_CE=m
> +CONFIG_CRYPTO_SHA2_ARM_CE=m
> +CONFIG_CRYPTO_SHA512_ARM=m
> +CONFIG_CRYPTO_AES_ARM_BS=m
> +CONFIG_CRYPTO_AES_ARM_CE=m
> +CONFIG_CRYPTO_GHASH_ARM_CE=m
> --
> 2.1.0.27.g96db324
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ